Foraging by the omnivorous crab Pachygrapsus transversus affects the structure of assemblages on sub-tropical rocky shores

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Expert opinion as an instrument for assessing investment in primary education

Includes bibliography

Alternativas para redução de efeitos de multicolinearidade em modelos de avaliação de efeitos genéticos em bovinos de corte

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Resistência de união da resina composta à dentina irradiada com laser de Nd:YAG, utilizando o teste de microtração

Pós-graduação em Ciências Odontológicas - FOAR

Bond strength of composite to dentin: effect of acid etching and laser irradiation through an uncured self-etch adhesive system

This study evaluated the effect on micro-tensile bond strength (mu-TBS) of laser irradiation of etched/unetched dentin through an uncured self-etching adhesive. Dentinal surfaces were treated with Clearfil SE Bond Adhesive (CSE) either according to the manufacturer's instructions (CSE) or without applying the primer (CSE/NP). The dentin was irradiated through the uncured adhesive, using an Nd: YAG laser at 0.75 or 1 W power settings. The adhesive was cured, composite crowns were built up, and the teeth were sectioned into beams (0.49 mm(2)) to be stressed under tension. Data were analyzed using one-way ANOVA and Tukey statistics (alpha = 5%). Dentin of the fractured specimens and the interfaces of untested beams were observed under scanning electron microscopy (SEM). The results showed that non-etched irradiated surfaces presented higher mu-TBS than etched and irradiated surfaces (p < 0.05). Laser irradiation alone did not lead to differences in mu-TBS (p > 0.05). SEM showed solidification globules on the surfaces of the specimens. The interfaces were similar on irradiated and non-irradiated surfaces. Laser irradiation of dentin through the uncured adhesive did not lead to higher mu-TBS when compared to the suggested manufacturer's technique. However, this treatment brought benefits when performed on unetched dentin, since bond strengths were higher when compared to etched dentin.

Nd:YAG Laser Irradiation of Etched/Unetched Dentin Through an Uncured Two-step Etch-and-Rinse Adhesive and its Effect on Microtensile Bond Strength

Purpose: To evaluate whether Nd:YAG laser irradiation of etched and unetched dentin through an uncured adhesive affected the microtensile bond strength (pTBS). Materials and Methods: Flat dentin surfaces were created in 19 extracted human third molars. Adper Single Bond (SB) adhesive was applied over etched (groups 1 to 3) or unetched dentin (groups 4 to 6). The dentin was then irradiated with a Nd:YAG laser through the uncured adhesive, using 0.75 or 1 W power settings, except for the control groups (groups 1 and 4). The adhesive was light cured and composite crowns were built up. After 24 h, the teeth were sectioned into beams, with cross-sectional areas of 0.49 mm(2), and were stressed under tension. Data were statistically analyzed using two-way ANOVA and Tukey's test (alpha = 5%). Dentin surfaces of fractured specimens and the interfaces of untested beams were observed under scanning electron microscopy (SEM). Results: Acid etching, laser irradiation, and their interaction significantly affected bonding (p < 0.05). Laser irradiation did not improve bonding of etched dentin to resin (p > 0.05). However, higher pTBS means were found on unetched lased dentin (groups 5 and 6), but only in comparison to group 4, where neither lasing nor etching was performed. Groups 4 to 6 showed the lowest pTBS means among all groups tested (p < 0.05). Laser irradiation did not change the characteristics of the hybrid layers created, while solidification globules were observed on lased dentin surfaces under SEM. Conclusion: Laser irradiation of dentin through the uncured adhesive did not significantly improve the pTBS in comparison to the suggested manufacturer's technique.

Structure- and Ligand-Based Structure-Activity Relationships for a Series of Inhibitors of Aldolase

Aldolase has emerged as a promising molecular target for the treatment of human African trypanosomiasis. Over the last years, due to the increasing number of patients infected with Trypanosoma brucei, there is an urgent need for new drugs to treat this neglected disease. In the present study, two-dimensional fragment-based quantitative-structure activity relationship (QSAR) models were generated for a series of inhibitors of aldolase. Through the application of leave-one-out and leave-many-out cross-validation procedures, significant correlation coefficients were obtained (r(2) = 0.98 and q(2) = 0.77) as an indication of the statistical internal and external consistency of the models. The best model was employed to predict pK(i) values for a series of test set compounds, and the predicted values were in good agreement with the experimental results, showing the power of the model for untested compounds. Moreover, structure-based molecular modeling studies were performed to investigate the binding mode of the inhibitors in the active site of the parasitic target enzyme. The structural and QSAR results provided useful molecular information for the design of new aldolase inhibitors within this structural class.

A fragment-based approach for ligand binding affinity and selectivity for the liver X receptor beta

Selective modulation of liver X receptor beta (LXR beta) has been recognized as an important approach to prevent or reverse the atherosclerotic process. In the present work, we have developed robust conformation-independent fragment-based quantitative structure-activity and structure-selectivity relationship models for a series of quinolines and cinnolines as potent modulators of the two LXR sub-types. The generated models were then used to predict the potency of an external test set and the predicted values were in good agreement with the experimental results, indicating the potential of the models for untested compounds. The final 2D molecular recognition patterns obtained were integrated to 3D structure-based molecular modeling studies to provide useful insights into the chemical and structural determinants for increased LXR beta binding affinity and selectivity. (C) 2011 Elsevier Inc. All rights reserved.

Structure-based drug design studies on a series of aldolase inhibitors

Human African trypanosomiasis, also known as sleeping sickness, is a major cause of death in Africa, and for which there are no safe and effective treatments available. The enzyme aldolase from Trypanosoma brucei is an attractive, validated target for drug development. A series of alkyl‑glycolamido and alkyl-monoglycolate derivatives was studied employing a combination of drug design approaches. Three-dimensional quantitative structure-activity relationships (3D QSAR) models were generated using the comparative molecular field analysis (CoMFA). Significant results were obtained for the best QSAR model (r2 = 0.95, non-cross-validated correlation coefficient, and q2 = 0.80, cross-validated correlation coefficient), indicating its predictive ability for untested compounds. The model was then used to predict values of the dependent variables (pKi) of an external test set,the predicted values were in good agreement with the experimental results. The integration of 3D QSAR, molecular docking and molecular dynamics simulations provided further insight into the structural basis for selective inhibition of the target enzyme.

Fine Mapping of qroot-yield-1.06, a QTL for Root, Plant Vigor and Yield in Maize

Root-yield-1.06 is a major QTL affecting root system architecture (RSA) and other agronomic traits in maize. The effect of this QTL has been evaluated with the development of near isogenic lines (NILs) differing at the QTL position. The objective of this study was to fine map qroot-yield-1.06 by marker-assisted searching for chromosome recombinants in the QTL interval and concurrent root phenotyping in both controlled and field conditions, through successive generations. Complementary approaches such as QTL meta-analysis and RNA-seq were deployed in order to help prioritizing candidate genes within the QTL target region. Using a selected group of genotypes, field based root analysis by ‘shovelomics’ enabled to accurately collect RSA information of adult maize plants. Shovelomics combined with software-assisted root imaging analysis proved to be an informative and relatively highly automated phenotyping protocol. A QTL interval mapping was conducted using a segregating population at the seedling stage grown in controlled environment. Results enabled to narrow down the QTL interval and to identify new polymorphic markers for MAS in field experiments. A collection of homozygous recombinant NILs was developed by screening segregating populations with markers flanking qroot-yield-1.06. A first set of lines from this collection was phenotyped based on the adapted shovelomics protocol. QTL analysis based on these data highlighted an interval of 1.3 Mb as completely linked with the target QTL but, a larger safer interval of 4.1 Mb was selected for further investigations. QTL meta-analysis allows to synthetize information on root QTLs and two mQTLs were identified in the qroot-yield-1.06 interval. Trascriptomics analysis based on RNA-seq data of the two contrasting QTL-NILs, confirmed alternative haplotypes at chromosome bin 1.06. qroot-yield-1.06 has now been delimited to a 4.1-Mb interval, and thanks to the availability of additional untested homozygous recombinant NILs, the potentially achievable mapping resolution at qroot-yield-1.06 is c. 50 kb.

Hexenfieber im Erzgebirge - Die Annaberger Krankheit 1712 - 1720

Die Arbeit untersucht das seuchenartige Auftreten von Besessenheitsfällen in Annaberg (Erzgebirge) in den Jahren 1713-1720, die Auslöser der letzten Hexenprozesse in Kursachsen waren. Zeitgenössische Beobachter stritten intensiv, ob diese sogenannte „Annaberger Krankheit“ durch Zauberei verursacht oder eine psychosomatisch bedingte Massenerkrankung war. In Abkehr von dem Vorurteil, alle Betroffenen einer solchen Massenhysterie litten an derselben Erkrankung, werden diverse Krankengeschichten rekonstruiert. Indem sich dabei Elemente von Rollenspielen (Kinderhexen, Hysterie) und Betrug (Almosenerschleichung, Denunziationen, politisch motivierte Inszenierungen) finden, zeigt sich die wundersame „Krankheit“ als nicht pathologischer sondern sozialer Vorgang. rnAm dessen Beginn stand die Geburt der Interpretation, es gäbe eine außergewöhnliche Krankheit in der Stadt, wozu akzidentielle Ereignisse mehr beitrugen als auffällige Krankheitsfälle. Gerüchtbildung und politische Instrumentalisierung bildeten den Rahmen für den Einstieg von Nachahmern, die das fiktive Krankheitsbild in die Realität eines demonstrativen Schauspiel umsetzten. Dieser Mechanismus eines selbsterfüllenden Menetekels wird vor dem Hintergrund seiner kulturellen, sozialen, ökonomischen und historischen Bedingungen detailliert rekonstruiert.

Fear of the unknown: local knowledge and perceptions of the Eurasian lynx

The remnant population of Balkan lynx Lynx lynx martinoi is small, isolated and highly threatened. Since 2006 a conservation project has surveyed its status and promoted its recovery in Albania and Macedonia. Eurasian lynx are often associated with conflicts of an economic or social nature, and their conservation requires a focus on the people sharing the landscape with the species. In this study we adopt methods and conceptual frameworks from anthropology to explore the local knowledge and perceptions of lynx among rural hunters and livestock breeders in the western mountains of the Republic of Macedonia in south-east Europe. The main finding was that local people rarely saw or interacted with lynx. As the level of interactions with this species is very low, the lynx doesn?t appear to be a species associated with conflicts in Macedonia. There was also a general lack of both scientific and local knowledge, which has led to somewhat negative attitudes, mainly based on myths and rumours. Poaching of lynx and their prey seem to be the main barriers to lynx conservation.

The Expression Of Motor Planning In Squirrel Monkeys (Saimiri sciureus) And Brown Capuchins (Cebus apella)

Multiple recent studies provide evidence that both human and nonhuman primates possess motor planning abilities. I tested for the demonstration of motor planning in two previously untested primate species through two experiments. In the first experiment, I compared the extent to which squirrel monkeys (Saimiri sciureus) and brown capuchins (Cebus apella) plan their movements in a grasping task. Individuals were presented with an inverted cup that required being turned and held upright in order to extract a food reward from the inside of the cup. This task was most efficiently solved by using an initially awkward inverted grasp that affords a comfortable hand and arm orientation at the end of the movement (known as end-state comfort). While certain individuals from both species exhibited end-state comfort, many of the capuchins never demonstrated this type of motor planning. Furthermore, the squirrel monkeys used the efficient grasp significantly more than the capuchins. In the second experiment, I presented the capuchins with another grasping task to test if they would express motor planning abilities in a different context. Here, the capuchins were offered a dowel that was baited on either the left or right end. A radial grasp with the thumb pointing towards the baited end was considered to be the most efficient grasp because it afforded a comfortable final position. The capuchins switched hands and used an overhand radial grasp on the dowel significantly more often than not, thus demonstrating motor planning in this task. The grasps typically utilized by these two closely related species differ considerably in that capuchins are capable of exercising precision grips, whereas squirrel monkeys are limited to whole-handed power grips. Moreover, unlike capuchins, squirrel monkeys are not particularly dexterous nor are they capable of precise manipulative actions. It is therefore more beneficial for squirrel monkeys to plan their movements efficiently because they are less capable of compensating for inappropriate initial grasps. Due to the appreciable variability in the expression of motor planning skills across species, I proposed that morphological constraints might explain the observed discrepancies in movement planning among different primate species.

Design Simulation for Solar Energy Research and Education

Solar research is primarily conducted in regions with consistent sunlight, severely limiting research opportunities in many areas. Unfortunately, the unreliable weather in Lewisburg, PA, can prove difficult for such testing to be conducted. As such, a solar simulator was developed for educational purposes for the Mechanical Engineering department at Bucknell University. The objective of this work was to first develop a geometric model to evaluate a one sun solar simulator. This was intended to provide a simplified model that could be used without the necessity of expensive software. This model was originally intended to be validated experimentally, but instead was done using a proven ray tracing program, TracePro. Analyses with the geometrical model and TracePro demonstrated the influence the geometrical properties had results, specifically the reflector (aperture) diameter and the rim angle. Subsequently, the two were approaches were consistent with one another for aperture diameters 0.5 m and larger, and for rim angles larger than 45°. The constructed prototype, that is currently untested, was designed from information provided by the geometric model, includes a metal halide lamp with a 9.5 mm arc diameter and parabolic reflector with an aperture diameter of 0.631 meters. The maximum angular divergence from the geometrical model was predicted to be 30 mRadians. The average angular divergence in TraceProof the system was 19.5 mRadians, compared to the sun’s divergence of 9.2 mRadians. Flux mapping in TracePro showed an intensity of 1000 W/m2 over the target plane located 40 meters from the lamp. The error between spectrum of the metal halide lamp and the solar spectrum was 10.9%, which was found by comparing their respective Plank radiation distributions. The project did not satisfy the original goal of matching the angular divergence of sunlight, although the system could still to be used for optical testing. The geometric model indicated performance in this area could be improved by increasing the diameter of the reflector, as well as decreasing the source diameter. Although ray tracing software provides more information to analyze the simulator system, the geometrical model is adequate to provide enough information to design a system.

The quantitative genetic basis of offspring solicitation and parental response in a passerine bird with biparental care

The coevolution of parental investment and offspring solicitation is driven by partly different evolutionary interests of genes expressed in parents and their offspring. In species with biparental care, the outcome of this conflict ma!: be influenced by the sexual conflict over parental investment, Models for the resolution of such family conflicts have made so far untested assumptions about genetic variation and covariation in the parental resource provisioning response and the level of offspring solicitation. Using a combination of cross-fostering and begging playback experiments, we show that, in the great tit (Parus major), (i) the begging call intensity of nestlings depends on their common origin, suggesting genetic variation for this begging display, (ii) only mothers respond to begging calls by increased food provisioning, and (iii! the size of the parental response is positively related to the begging call intensity of nestlings in the maternal but not paternal line. This study indicates that genetic covariation, its differential expression in the maternal and paternal lines and/or early environmental and parental effects need to be taken into account when predicting the phenotypic outcome of the conflict over investment between genes expressed in each parent and the offspring. [References: 36]