Ceramic Primer Heat-Treatment Effect on Resin Cement/Y-TZP Bond Strength

The purpose of this study was to evaluate the effect of different heat-treatment strategies for a ceramic primer on the shear bond strength of a 10-methacryloyloxydecyl-dihydrogen-phosphate (MDP)-based resin cement to a yttrium-stabilized tetragonal zirconia polycrystal (Y-TZP) ceramic. Specimens measuring 4.5 x 3.5 x 4.5 mm(3) were produced from Y-TZP presintered cubes and embedded in polymethyl methacrylate (PMMA). Following finishing, the specimens were cleaned using an ultrasound device and distilled water and randomly divided into 10 experimental groups (n=14) according to the heat treatment of the ceramic primer and aging condition. The strategies used for the experimental groups were: GC (control), without primer; G20, primer application at ambient temperature (20 degrees C); G45, primer application + heat treatment at 45 degrees C; G79, primer application + heat treatment at 79 degrees C; and G100, primer application + heat treatment at 100 degrees C. The specimens from the aging groups were submitted to thermal cycling (6000 cycles, 5 degrees C/55 degrees C, 30 seconds per bath) after 24 hours. A cylinder of MDP-based resin cement (2.4 mm in diameter) was constructed on the ceramic surface of the specimens of each experimental group and stored for 24 hours at 37 degrees C. The specimens were submitted to a shear bond strength test (n=14). Thermal gravimetric analysis was performed on the ceramic primer. The data obtained were statistically analyzed by two-way analysis of variance and the Tukey test (alpha=0.05). The experimental group G79 without aging (7.23 +/- 2.87 MPa) presented a significantly higher mean than the other experimental groups without aging (GC: 2.81 +/- 1.5 MPa; G20: 3.38 +/- 2.21 MPa; G100: 3.96 +/- 1.57 MPa), showing no difference from G45 only (G45: 6 +/- 3.63 MPa). All specimens of the aging groups debonded during thermocycling and were considered to present zero bond strength for the statistical analyses. In conclusion, heat treatment of the metal/zirconia primer improved bond strength under the initial condition but did not promote stable bonding under the aging condition.

Estudos das propriedades ópticas e térmicas dos xerogéis de sílica dopados com Rodamina B

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo das propriedades térmicas e mecânicas de blendas de PVDF/PANI

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência dos defeitos cristalinos nas propriedades dielétricas e não-ôhmicas do 'CA' 'CU IND.3' 'TI IND.4' 'O IND.12'(CCTO)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Craqueamento termocatalítico da borra de neutralização do óleo de palma (Elaeis guineensis) em escala piloto

Os subprodutos das indústrias de refino de óleo e de biodiesel, como a borra de neutralização, são bastante extensivos e devido a sua baixa pureza e valor econômico constituem uma problemática para essas indústrias no descarte e destinação, sendo de fundamental interesse pesquisas para a utilização desse rejeito. Portanto, este trabalho visa investigar uma alternativa viável, econômica e ambiental para o destino deste subproduto usando o Processo de Craqueamento Termocatalítico da Borra de Neutralização do Óleo de Palma (Elaeis guineensis, Jaqc) em escala piloto utilizando-se 5, 10 e 15% de Carbonato de Sódio (Na²CO³) como catalisador e temperaturas finais de 440ºC e 420ºC. A borra foi obtida pelo processo de neutralização e submetida a uma desidratação e caracterizada assim como o catalisador foi desidratado em estufa e caracterizado em relação à Difração de Raio-X, Análise Térmica Gravimétrica (ATG) e à Análise Térmica Diferencial (TDA). Foram realizados cinco testes de craqueamento termocatalítico na Usina Piloto de Craqueamento (THERMTEK/FEQ/UFPA) o qual é constituído em um reator com agitação mecânica e capacidade de 125 litros, além da dinâmica do processo e destilação dos produtos do craqueamento. O produto líquido orgânico (PLO), amostras da dinâmica do processo e frações da destilação foram caracterizados de acordo com cada norma exigida pela ANP N°65 e analisadas por IV e RMN. Após as análises dos resultados verificou-se que a eficiência do processo aumenta com catalisador e temperatura e que a matéria-prima fornece produtos de baixa acidez e com boas características para uso como combustível. Pela análise da termodinâmica do processo percebeu que alguns parâmetros como viscosidade, densidade e ponto de fulgor diminuem com o tempo e aumento da temperatura, formando hidrocarbonetos mais leves. Com relação à destilação, as frações nas faixas mais pesadas se assemelham ao óleo diesel do petróleo na maioria dos parâmetros exigidos pela ANP N°65.

Migração com amplitude verdadeira em meios bidimensionais (2-D) e introdução ao caso 2,5-D

Nos últimos anos tem-se verificado através de várias publicações um interesse crescente em métodos de migração com amplitude verdadeira, com o objetivo de obter mais informações sobre as propriedades de refletividade da subsuperfície da terra. A maior parte desses trabalhos tem tratado deste tema baseando-se na aproximação de Born, como em Bleistein (1987) e Bleistein et al. (1987), ou na aproximação do campo de ondas pela teoria do raio como Hubral et al. (1991), Schleicher et al. (1993) e Martins et al. (1997). Considerando configurações arbitrárias de fontes e receptores, as reflexões primárias compressionais podem ser imageadas em reflexões migradas no domínio do tempo ou profundidade de tal modo que as amplitudes do campo de ondas migrado são uma medida do coeficiente de reflexão dependente do ângulo de incidência. Para realizar esta tarefa, vários algoritmos têm sido propostos nos últimos anos baseados nas aproximações de Kirchhoff e Born. Essas duas abordagens utilizam um operador integral de empilhamento de difrações ponderado que é aplicado aos dados da seção sísmica de entrada. Como resultado obtém-se uma seção migrada onde, em cada ponto refletor, tem-se o pulso da fonte com amplitude proporcional ao coeficiente de reflexão naquele ponto. Baseando-se na aproximação de Kirchhoff e na aproximação da teoria do raio do campo de ondas, neste trabalho é obtida a função peso para modelos bidimensionais (2-D) e dois e meio dimensionais (2,5-D) que é aplicada a dados sintéticos com e sem ruído. O resultado mostra a precisão e estabilidade do método de migração em 2-D e 2,5-D como uma ferramenta para a obtenção de informações importantes da subsuperfície da terra, que é de grande interesse para a análise da variação da amplitude com o afastamento (ângulo). Em suma, este trabalho apresenta expressões para as funções peso 2-D e 2,5-D em função de parâmetros ao longo de cada ramo do raio. São mostrados exemplos da aplicação do algoritmo de migração em profundidade a dados sintéticos 2-D e 2,5-D obtidos por modelamento sísmico através da teoria do raio usando o pacote Seis88 (Cervený e Psencík, 1988) e os resultados confirmaram a remoção do espalhamento geométrico dos dados migrados mesmo na presença de ruído. Testes adicionais foram realizados para a análise do efeito de alongamento do pulso na migração em profundidade (Tygel et al., 1994) e a aplicação do empilhamento múltiplo (Tygel et al., 1993) para a estimativa de atributos dos pontos de reflexão - no caso o ângulo de reflexão e a posição do receptor.

Estudo de geopolímeros utilizando cinzas residuais do bagaço de cana-de-açúcar

Pós-graduação em Engenharia Civil - FEIS

Characterization of tetraethylene glycol passivated iron nanoparticles

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Assessment of broiler surface temperature variation when exposed to different air temperatures

This study was conducted to determine the effect of the air temperature variation on the mean surface temperature (MST) of 7-to 35-day-old broiler chickens using infrared thermometry to estimate MST, and to study surface temperature variation of the wings, head, legs, back and comb as affected by air temperature and broiler age. One hundred Cobb(R) broilers were used in the experiment. Starting on day 7, 10 birds were weekly selected at random, housed in an environmental chamber and reared under three distinct temperatures (18, 25 and 32 degrees C) to record their thermal profile using an infrared thermal camera. The recorded images were processed to estimate MST by selecting the whole area of the bird within the picture and comparing it with the values obtained using selected equations in literature, and to record the surface temperatures of the body parts. The MST estimated by infrared images were not statistically different (p > 0.05) from the values obtained by the equations. MST values significantly increased (p < 0.05) when the air temperature increased, but were not affected by bird age. However, age influenced the difference between MST and air temperature, which was highest on day 14. The technique of infrared thermal image analysis was useful to estimate the mean surface temperature of broiler chickens.

Caracterização de filmes de BaxSr1-xTiO3 Sintetizados pelo método hidrotermal assistido por micro-ondas e depositados por eletroforese

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Membranas de biocelulose como substrato para o crescimento de nanofios de ZnO: síntese e aplicação

Pós-graduação em Química - IQ

Membranas de biocelulose como substrato para o crescimento de nanofios de ZnO: síntese e aplicação

Pós-graduação em Química - IQ

Is the meander growth in the Brazil Current system off Southeast Brazil due to baroclinic instability?

Temporally-growing frontal meandering and occasional eddy-shedding is observed in the Brazil Current (BC) as it flows adjacent to the Brazilian Coast. No study of the dynamics of this phenomenon has been conducted to date in the region between 22 degrees S and 25 degrees S. Within this latitude range, the flow over the intermediate continental slope is marked by a current inversion at a depth that is associated with the Intermediate Western Boundary Current (IWBC). A time series analysis of 10-current-meter mooring data was used to describe a mean vertical profile for the BC-IWBC jet and a typical meander vertical structure. The latter was obtained by an empirical orthogonal function (EOF) analysis that showed a single mode explaining 82% of the total variance. This mode structure decayed sharply with depth, revealing that the meandering is much more vigorous within the BC domain than it is in the IWBC region. As the spectral analysis of the mode amplitude time series revealed no significant periods, we searched for dominant wavelengths. This search was done via a spatial EOF analysis on 51 thermal front patterns derived from digitized AVHRR images. Four modes were statistically significant at the 95% confidence level. Modes 3 and 4, which together explained 18% of the total variance, are associated with 266 and 338-km vorticity waves, respectively. With this new information derived from the data, the [Johns, W.E., 1988. One-dimensional baroclinically unstable waves on the Gulf Stream potential vorticity gradient near Cape Hatteras. Dyn. Atmos. Oceans 11, 323-350] one-dimensional quasi-geostrophic model was applied to the interpolated mean BC-IWBC jet. The results indicated that the BC system is indeed baroclinically unstable and that the wavelengths depicted in the thermal front analysis are associated with the most unstable waves produced by the model. Growth rates were about 0.06 (0.05) days(-1) for the 266-km (338-km) wave. Moreover, phase speeds for these waves were low compared to the surface BC velocity and may account for remarks in the literature about growing standing or stationary meanders off southeast Brazil. The theoretical vertical structure modes associated with these waves resembled very closely to the one obtained for the current-meter mooring EOF analysis. We interpret this agreement as a confirmation that baroclinic instability is an important mechanism in meander growth in the BC system. (C) 2008 Elsevier B.V. All rights reserved.

Ceramic Primer Heat-Treatment Effect on Resin Cement/Y-TZP Bond Strength

The purpose of this study was to evaluate the effect of different heat-treatment strategies for a ceramic primer on the shear bond strength of a 10-methacryloyloxydecyl-dihydrogen-phosphate (MDP)-based resin cement to a yttrium-stabilized tetragonal zirconia polycrystal (Y-TZP) ceramic. Specimens measuring 4.5 x 3.5 x 4.5 mm(3) were produced from Y-TZP presintered cubes and embedded in polymethyl methacrylate (PMMA). Following finishing, the specimens were cleaned using an ultrasound device and distilled water and randomly divided into 10 experimental groups (n=14) according to the heat treatment of the ceramic primer and aging condition. The strategies used for the experimental groups were: GC (control), without primer; G20, primer application at ambient temperature (20 degrees C); G45, primer application + heat treatment at 45 degrees C; G79, primer application + heat treatment at 79 degrees C; and G100, primer application + heat treatment at 100 degrees C. The specimens from the aging groups were submitted to thermal cycling (6000 cycles, 5 degrees C/55 degrees C, 30 seconds per bath) after 24 hours. A cylinder of MDP-based resin cement (2.4 mm in diameter) was constructed on the ceramic surface of the specimens of each experimental group and stored for 24 hours at 37 degrees C. The specimens were submitted to a shear bond strength test (n=14). Thermal gravimetric analysis was performed on the ceramic primer. The data obtained were statistically analyzed by two-way analysis of variance and the Tukey test (alpha=0.05). The experimental group G79 without aging (7.23 +/- 2.87 MPa) presented a significantly higher mean than the other experimental groups without aging (GC: 2.81 +/- 1.5 MPa; G20: 3.38 +/- 2.21 MPa; G100: 3.96 +/- 1.57 MPa), showing no difference from G45 only (G45: 6 +/- 3.63 MPa). All specimens of the aging groups debonded during thermocycling and were considered to present zero bond strength for the statistical analyses. In conclusion, heat treatment of the metal/zirconia primer improved bond strength under the initial condition but did not promote stable bonding under the aging condition.

Elaboration and Characterization of Nano-Biocomposites Based on Plasticized Poly(Hydroxybutyrate-Co-Hydroxyvalerate) with Organo-Modified Montmorillonite

Nano-biocomposites based on a biodegradable bacterial copolyester, poly(hydroxybutyrate-co-hydroxyvalerate), have been elaborated with an organo-modified montmorillonite (OMMT) clay as nanofiller, and acetyl tributyl citrate as plasticizer. The corresponding (nano)structures, thermal and mechanical properties, permeability, and biodegradability have been determined. Polyhydroxyalkanoates are very thermal sensitive then to follow the degradation the corresponding matrices have been analyzed by size exclusion chromatography. The results indicate that the addition of the plasticizer decreases the thermo-mechanical degradation, during the extrusion. These nano-biocomposites show an intercalated/exfoliated structure with good mechanical and barrier properties, and an appropriated biodegradation kinetic. Intending to understand the changes in the thermal properties, the nano-biocomposites were characterized by thermal gravimetric analysis and differential scanning calorimetry. The presence of the OMMT clay did not influence significantly the transition temperatures. However, the filler not only acted as a nucleating agent which enhanced the crystallization, but also as a thermal barrier, improving the thermal stability of the biopolymer. The results indicated that the addition of the plasticizer reduces the glass transition temperature and the crystalline melting temperature. The plasticizer acts as a processing aid and increases the processing temperature range (lower melting temperature).