A comparison of the vocational training system of Britain and West Germany as experienced by minimum-age school leavers.

The sectoral and occupational structure of Britain and West Germany has increasingly changed over the last fifty years from a manual manufacturing based to a non-manual service sector based one. There has been a trend towards more managerial and less menial type occupations. Britain employs a higher proportion of its population in the service sector than in manufacturing compared to West Germany, except in retailing, where West Germany employs twice as many people as Britain. This is a stable sector of the economy in terms of employment, but the requirements of the workforce have changed in line with changes in the industry in both countries. School leavers in the two countries, faced with the same options (FE, training schemes or employment) have opted for the various options in different proportions: young Germans are staying longer in education before embarking on training and young Britons are now less likely to go straight into employment than ten years ago. Training is becoming more accepted as the normal route into employment with government policy leading the way, but public opinion still slow to respond. This study investigates how vocational training has adapted to the changing requirements of industry, often determined by technological advancements. In some areas e.g. manufacturing industry the changes have been radical, in others such as retailing they have not, but skill requirements, not necessarily influenced by technology have changed. Social-communicative skills, frequently not even considered skills and therefore not included in training are coming to the forefront. Vocational training has adapted differently in the two countries: in West Germany on the basis of an established over-defined system and in Britain on the basis of an out-dated ill-defined and almost non-existent system. In retailing German school leavers opt for two or three year apprenticeships whereas British school leavers are offered employment with or without formalised training. The publicly held view of the occupation of sales assistant is one of low-level skill, low intellectual demands and a job anyone can do. The traditional skills - product knowledge, selling and social-communicative skills have steadily been eroded. In the last five years retailers have recognised that a return to customer service, utilising the traditional skills was going to be needed of their staff to remain competitive. This requires training. The German retail training system responded by adapting its training regulations in a long consultative process, whereas the British experimented with YTS, a formalised training scheme nationwide being a new departure. The thesis evaluates the changes in these regulations. The case studies in four retail outlets demonstrate that it is indeed product knowledge and selling and social-communicative skills which are fundamental to being a successful and content sales assistant in either country. When the skills are recognised and taught well and systematically the foundations for career development in retailing are laid in a labour market which is continually looking for better qualified workers. Training, when planned and conducted professionally is appreciated by staff and customers and of benefit to the company. In retailing not enough systematic training, to recognisable standards is carried out in Britain, whereas in West Germany the training system is nevertheless better prepared to show innovative potential as a structure and is in place on which to build. In Britain the reputation of the individual company has a greater role to play, not ensuring a national provision of good training in retailing.

A comparison between static and kinetic visual attention as a means of detecting age-related deterioration of the visual system and driving performance

A critical review of previous research revealed that visual attention tests, such as the Useful Field of View (UFOV) test, provided the best means of detecting age-related changes to the visual system that could potentially increase crash risk. However, the question was raised as to whether the UFOV, which was regarded as a static visual attention test, could be improved by inclusion of kinetic targets that more closely represent the driving task. A computer program was written to provide more information about the derivation of UFOV test scores. Although this investigation succeeded in providing new information, some of the commercially protected UFOV test procedures still remain unknown. Two kinetic visual attention tests (DRTS1 and 2), developed at Aston University to investigate inclusion of kinetic targets in visual attention tests, were introduced. The UFOV was found to be more repeatable than either of the kinetic visual attention tests and learning effects or age did not influence these findings. Determinants of static and kinetic visual attention were explored. Increasing target eccentricity led to reduced performance on the UFOV and DRTS1 tests. The DRTS2 was not affected by eccentricity but this may have been due to the style of presentation of its targets. This might also have explained why only the DRTS2 showed laterality effects (i.e. better performance to targets presented on the left hand side of the road). Radial location, explored using the UFOV test, showed that subjects responded best to targets positioned to the horizontal meridian. Distraction had opposite effects on static and kinetic visual attention. While UFOV test performance declined with distraction, DRTS1 performance increased. Previous research had shown that this striking difference was to be expected. Whereas the detection of static targets is attenuated in the presence of distracting stimuli, distracting stimuli that move in a structured flow field enhances the detection of moving targets. Subjects reacted more slowly to kinetic compared to static targets, longitudinal motion compared to angular motion and to increased self-motion. However, the effects of longitudinal motion, angular motion, self-motion and even target eccentricity were caused by target edge speed variations arising because of optic flow field effects. The UFOV test was more able to detect age-related changes to the visual system than were either of the kinetic visual attention tests. The driving samples investigated were too limited to draw firm conclusions. Nevertheless, the results presented showed that neither the DRTS2 nor the UFOV tests were powerful tools for the identification of drivers prone to crashes or poor driving performance.

Accounting students' perceptions of a Learning Management System:an international comparison

Purpose - The purpose of this study is to investigate student perceptions of the design features included in an off the shelf Learning Management System (LMS) in teaching undergraduate accounting students. Design/methodology/approach - Questionnaire responses from 846 accounting students studying in the UK, Australia and New Zealand provide international data to develop a model to explain student perception of the LMS. Findings - The final model shows student satisfaction with the use of a LMS is positively associated with three variables: usefulness of lecture notes, bulletin boards and discussion forums, and other LMS tools. Further, the comparison of cultural differences of the three countries shows all students treat the provision of notes as a desirable attribute on a LMS. Findings also suggest that although students find the provision of materials over the LMS does not enhance student engagement in class, overall a comparison of the three countries shows all students treat the provision of notes as a desirable attribute of a LMS. Research limitations/implications - Future research should collect ethnicity data to enable an analysis of cultural influence on student perceptions of the LMS. Practical implications - As increased motivation to learn is found to contribute to improved achievement of learning outcomes, the study's findings have implications for faculty contemplating the adoption of a LMS in their courses. The findings specifically confirm that usefulness of lecture notes, use of bulletin/discussion boards, and other LMS tools are positively endorsed by students and hence increase their motivation to learn. Originality/value - The current paper adds to the literature as the motivation to use and engage with LMSs by accounting students is not well understood. © Emerald Group Publishing Limited.

Verification of the indoor GPS system, by comparison with calibrated coordinates and by angular reference

This paper details work carried out to verify the dimensional measurement performance of the Indoor GPS (iGPS) system; a network of Rotary-Laser Automatic Theodolites (R-LATs). Initially tests were carried out to determine the angular uncertainties on an individual R-LAT transmitter-receiver pair. A method is presented of determining the uncertainty of dimensional measurement for a three dimensional coordinate measurement machine. An experimental procedure was developed to compare three dimensional coordinate measurements with calibrated reference points. The reference standard used to calibrate these reference points was a fringe counting interferometer with the multilateration technique employed to establish three dimensional coordinates. This is an extension of the established technique of comparing measured lengths with calibrated lengths. The method was found to be practical and able to establish that the expanded uncertainty of the basic iGPS system was approximately 1 mm at a 95% confidence level. Further tests carried out on a highly optimized version of the iGPS system have shown that the coordinate uncertainty can be reduced to 0.25 mm at a 95% confidence level.

A comparison of two distributed large-volume measurement systems:the mobile spatial co-ordinate measuring system and the indoor global positioning system

Advances in the area of industrial metrology have generated new technologies that are capable of measuring components with complex geometry and large dimensions. However, no standard or best-practice guides are available for the majority of such systems. Therefore, these new systems require appropriate testing and verification in order for the users to understand their full potential prior to their deployment in a real manufacturing environment. This is a crucial stage, especially when more than one system can be used for a specific measurement task. In this paper, two relatively new large-volume measurement systems, the mobile spatial co-ordinate measuring system (MScMS) and the indoor global positioning system (iGPS), are reviewed. These two systems utilize different technologies: the MScMS is based on ultrasound and radiofrequency signal transmission and the iGPS uses laser technology. Both systems have components with small dimensions that are distributed around the measuring area to form a network of sensors allowing rapid dimensional measurements to be performed in relation to large-size objects, with typical dimensions of several decametres. The portability, reconfigurability, and ease of installation make these systems attractive for many industries that manufacture large-scale products. In this paper, the major technical aspects of the two systems are briefly described and compared. Initial results of the tests performed to establish the repeatability and reproducibility of these systems are also presented. © IMechE 2009.

An inconsistency control system based on incomplete pairwise comparison matrices

Incomplete pairwise comparison matrix was introduced by Harker in 1987 for the case in which the decision maker does not fill in the whole matrix completely due to, e.g., time limitations. However, incomplete matrices occur in a natural way even if the decision maker provides a completely filled in matrix in the end. In each step of the total n(n–1)/2, an incomplete pairwise comparison is given, except for the last one where the matrix turns into complete. Recent results on incomplete matrices make it possible to estimate inconsistency indices CR and CM by the computation of tight lower bounds in each step of the filling in process. Additional information on ordinal inconsistency is also provided. Results can be applied in any decision support system based on pairwise comparison matrices. The decision maker gets an immediate feedback in case of mistypes, possibly causing a high level of inconsistency.

The effect of mastery learning on a course in accounting information system (AIS): A comparison within public and private universities in Taiwan

The Accounting Information System (AIS) is an important course in the Department of Accounting (DoAc) of universities in Taiwan. This course is required for seniors not only because it meets the needs of the profession, but also because it provides continual study for the department's students.^ The scores of The National College and University Joint Entrance Examination (NUEE) show that students with high learning ability are admitted to public universities with high scores, while those with low learning ability are admitted only to private universities. The same situation has been found by the researcher while teaching an AIS course in DoAc of The Public Chun Shin University (CSU) and The Private Chinese Culture University (CCU).^ The purpose of this study was to determine whether low ability students enrolled in private universities in Taiwan in a mastery learning program could attain the same level as high ability students from public universities enrolled in a traditional program. An experimental design was used. The mastery learning method was used to teach three groups of seniors with low learning ability studying in the DoAc at CCU. The traditional method was used to teach the control group which consisted of senior students of DoAc of CSU with high learning ability. As a part of the mastery learning strategy, a formative test, quizzes, and homework were completed by the experimental group only, while the mid-term examination was completed by both groups as part of the course. The dependent variable was the summative test, the final examination. It was completed by both groups upon the course's completion.^ As predicted, there were significant differences between the two groups' results on the pretest. There were no significant differences between the two groups' results on the posttest. These findings support the hypothesis of the study and reveal the effectiveness of mastery learning strategies with low learning ability students. ^

Verification of the indoor gps system by comparison with points calibrated using a network of laser tracker measurements

This paper details a method of determining the uncertainty of dimensional measurement for a three dimensional coordinate measurement machine. An experimental procedure was developed to compare three dimensional coordinate measurements with calibrated reference points. The reference standard used to calibrate these reference points was a fringe counting interferometer with the multilateration technique employed to establish three dimensional coordinates. This is an extension of the established technique of comparing measured lengths with calibrated lengths. Specifically a distributed coordinate measurement device was tested which consisted of a network of Rotary-Laser Automatic Theodolites (R-LATs), this system is known commercially as indoor GPS (iGPS). The method was found to be practical and able to establish that the expanded uncertainty of the basic iGPS system was approximately 1 mm at a 95% confidence level. © Springer-Verlag Berlin Heidelberg 2010.

A comparison of the physiological demands of rugby union match-play when determined by absolute (ABS) or individual (IND) velocity bands in Global Positioning System (GPS) analysis

Since turning professional in 1995 there have been considerable advances in the research on the demands of rugby union, largely using Global Positioning System (GPS) analysis over the last 10 years. A systematic review on the use of GPS, particularly the setting of absolute (ABS) and individual (IND) velocity bands in field based, intermittent, high-intensity (HI) team sports was undertaken. From 3669 records identified, 38 studies were included for qualitative analysis. Little agreement on the definition of movement intensities within team sports was found, only three papers, all on rugby union, had used IND bands, with only one comparing ABS and IND methods. Thus, the aim of this study was to determine if there is a difference in the demands within positions when comparing ABS and IND methods for GPS analysis and if these differences are significantly different between the forward and back positional groups. A total of 214 data files were recorded from 26 players in 17 matches of the 2015/2016 Scottish BT Premiership. ABS velocity zones 1-7 were set at 1) 0-6, 2) 6.1-11, 3) 11.1-15, 4) 15.1-18, 5) 18.1-21, 6) 21.1-15 and 7) 25.1-40km.h-1 while IND zones 1-7 were 1) <20, 2) 20-40, 3) 40-50, 4) 50-70, 5) 70-80, 6) 80-95 and 7) 95-100% of player’s individually determined maximum velocity (Vmax). A 40m sprint test measured Vmax using OptaPro S4 10 Hz (catapult, Australia) GPS units to derive IND bands. The same GPS units were worn during matches. GPS outputs analysed were % distance, % time, high intensity efforts (HIEs) over 18.1 km.h-1 / 70% max velocity and repeated high intensity efforts (RHIEs) which consists of three HIEs in 21secs. General linear model (GLM) analysis identified a significant difference in the measurement of % total distance covered, between the ABS and IND methods in all zones for forwards (p<0.05) and backs (p<0.05). This difference was also significant between forwards and backs in zones 1, shown as mean difference ± standard deviation (3.7±0.7%), 6 (1.2±0.4%) and 7 (1.0±0.0%) respectively (p<0.05). Percentage time estimations were significantly different between ABS and IND analysis within forwards in zones 1 (1.7±1.7%), 2 (-2.9±1.3%), 3 (1.9±0.8%), 4 (-1.4±0.8%) and 5 (0.2±0.4%), and within backs in zones 1 (-10±1.5%), 2 (-1.2±1.1%), 3 (1.8±0.9%) and 5 (0.6±0.5%) (p<0.05). The difference between groups was significant in zones 1, 2, 4 and 5 (p<0.05). The number of HIEs was significantly different between forwards and backs in zones 6 (6±2) and 7 (3±2). RHIEs were significantly different between ABS and IND for forwards (1±2, p<0.05) although not between groups. Until more research on the differences in ABS and IND methods is carried out, then neither can be deemed a criterion method. In conclusion, there are significant differences between the ABS and IND methods of GPS analysis of the physical demands of rugby union, which must be considered when used to inform training load and recovery to improve performance and reduce injuries.

Linearity analysis and comparison study on the epoc® point-of-care blood analysis system in cardiopulmonary bypass patients

The epoc® blood analysis system (Epocal Inc., Ottawa, Ontario, Canada) is a newly developed in vitro diagnostic hand-held analyzer for testing whole blood samples at point-of-care, which provides blood gas, electrolytes, ionized calcium, glucose, lactate, and hematocrit/calculated hemoglobin rapidly. The analytical performance of the epoc® system was evaluated in a tertiary hospital, see related research article “Analytical evaluation of the epoc® point-of-care blood analysis system in cardiopulmonary bypass patients” [1]. Data presented are the linearity analysis for 9 parameters and the comparison study in 40 cardiopulmonary bypass patients on 3 epoc® meters, Instrumentation Laboratory GEM4000, Abbott iSTAT, Nova CCX, and Roche Accu-Chek Inform II and Performa glucose meters.

Radiobiological model comparison of 3D conformal radiotherapy and IMRT plans for the treatment of prostate cancer

The main aim of radiotherapy is to deliver a dose of radiation that is high enough to destroy the tumour cells while at the same time minimising the damage to normal healthy tissues. Clinically, this has been achieved by assigning a prescription dose to the tumour volume and a set of dose constraints on critical structures. Once an optimal treatment plan has been achieved the dosimetry is assessed using the physical parameters of dose and volume. There has been an interest in using radiobiological parameters to evaluate and predict the outcome of a treatment plan in terms of both a tumour control probability (TCP) and a normal tissue complication probability (NTCP). In this study, simple radiobiological models that are available in a commercial treatment planning system were used to compare three dimensional conformal radiotherapy treatments (3D-CRT) and intensity modulated radiotherapy (IMRT) treatments of the prostate. Initially both 3D-CRT and IMRT were planned for 2 Gy/fraction to a total dose of 60 Gy to the prostate. The sensitivity of the TCP and the NTCP to both conventional dose escalation and hypo-fractionation was investigated. The biological responses were calculated using the Källman S-model. The complication free tumour control probability (P+) is generated from the combined NTCP and TCP response values. It has been suggested that the alpha/beta ratio for prostate carcinoma cells may be lower than for most other tumour cell types. The effect of this on the modelled biological response for the different fractionation schedules was also investigated.

Maintaining centralised application systems : a cross-country, cross-sector, cross-platform comparison

Past studies of software maintenance issues have largely concentrated on the average North American firm. While they have made a substantial contribution to good information system management practice, it is believed that further segmentation of sample data and cross-country comparisons will help to identify patterns of behaviour more akin to many less average organizations in North America and elsewhere. This paper compares the Singapore maintenance scene with the reported North American experience. Comparisons are also made between: Government organizations, Singapore corporations and multinational corporations (MNCs); mainframe and minicomputer installations; and fourth-generation language (4GL) and non-4GL computer installations. Study findings, while in many cases were similar to earlier US studies, do show the importance of Singapore's young application portfolio, the widespread usage of 4GLs and the severe maintenance personnel problems.

Health, Death, and Indigenous Australians in the Coronial system

This paper details research conducted in Queensland during the first year of operation of the new Coroners Act 2003. Information was gathered from all completed investigations between December 2003 and December 2004 across five categories of death: accidental, suicide, natural, medical and homicide. It was found that 25 percent of the total number of Indigenous deaths recorded in 2004 were reported to, and investigated by, the Coroner, in comparison to 9.4 percent of non-Indigenous deaths. Moreover, Indigenous people were found to be over-represented in each category of death, except in death in a medical setting, where they were absent.

Assessing information systems success models : empirical comparison (Research in Progress)

Information System (IS) success may be the most arguable and important dependent variable in the IS field. The purpose of the present study is to address IS success by empirically assess and compare DeLone and McLean’s (1992) and Gable’s et al. (2008) models of IS success in Australian Universities context. The two models have some commonalities and several important distinctions. Both models integrate and interrelate multiple dimensions of IS success. Hence, it would be useful to compare the models to see which is superior; as it is not clear how IS researchers should respond to this controversy.