Mathematical solutions for electricity networks in a low carbon future

Smart meters are becoming more ubiquitous as governments aim to reduce the risks to the energy supply as the world moves toward a low carbon economy. The data they provide could create a wealth of information to better understand customer behaviour. However at the household, and even the low voltage (LV) substation level, energy demand is extremely volatile, irregular and noisy compared to the demand at the high voltage (HV) substation level. Novel analytical methods will be required in order to optimise the use of household level data. In this paper we briefly outline some mathematical techniques which will play a key role in better understanding the customer's behaviour and create solutions for supporting the network at the LV substation level.

The impact of location and type on the performance of Low-Voltage network connected Battery Energy Storage Systems

This paper assesses the impact of the location and configuration of Battery Energy Storage Systems (BESS) on Low-Voltage (LV) feeders. BESS are now being deployed on LV networks by Distribution Network Operators (DNOs) as an alternative to conventional reinforcement (e.g. upgrading cables and transformers) in response to increased electricity demand from new technologies such as electric vehicles. By storing energy during periods of low demand and then releasing that energy at times of high demand, the peak demand of a given LV substation on the grid can be reduced therefore mitigating or at least delaying the need for replacement and upgrade. However, existing research into this application of BESS tends to evaluate the aggregated impact of such systems at the substation level and does not systematically consider the impact of the location and configuration of BESS on the voltage profiles, losses and utilisation within a given feeder. In this paper, four configurations of BESS are considered: single-phase, unlinked three-phase, linked three-phase without storage for phase-balancing only, and linked three-phase with storage. These four configurations are then assessed based on models of two real LV networks. In each case, the impact of the BESS is systematically evaluated at every node in the LV network using Matlab linked with OpenDSS. The location and configuration of a BESS is shown to be critical when seeking the best overall network impact or when considering specific impacts on voltage, losses, or utilisation separately. Furthermore, the paper also demonstrates that phase-balancing without energy storage can provide much of the gains on unbalanced networks compared to systems with energy storage.

Driven down by the storm

Review of Blizzard , performed by  Nat Cursio Company, at the Substation

Parallax

Parallax is a live contemporary dance work that incorporates 3D animation, stereoscopic illusions and dance. This work was performed within the Melbourne Fringe Festival at the Substation, Newport. Within this work the stereoscopic illusion creates a new choreographic palette that can be used to manipulate human physicality via animated bodies that appear within the performance space. The stereoscopic image is released from the wall and placed within the dancing environment the image becomes another body within the dance space that can be manipulated in ways that would be impossible for a real physical body. In turn, the dancing body is positioned within the digital environment. The performer’s abilities have not changed, but the space around the dancer can be manipulated with imagery that transforms the place of the dancer within time and space. The stereoscopic illusion and live dance are melded creating a new experience of choreography one that takes the infinite possibilities of 3D animation and places them directly within choreography. Thematically this performance draws on the historical events revolving around the development of the stereoscope in the 1830s and the seminal ideas of the virtual that surfaced at this time. In the early 1830s Charles Wheatstone drew on the ideas and writings of Euclid and Leonardo da Vinci and discovered binocular vision through the use of his stereoscope box. It was this box that became the entertainment sensation of this time becoming a standard parlour entertainment. Unlike now where imagery of people are everywhere in the 1830s these types of imagery were novel. The stereoscopic pictures often showed content of people doing ordinary tasks such as chopping wood, doing the washing or simply standing in front of their house. In Parallax a Victorian woman is transported from her hallway to virtual worlds where she encounters, Euclid’s ancient Greek column, a di Vinci sphere and one of the first stereoscopic images drawn by Charles Wheatstone’s a stick figure cube.

Voltage regulation in renewable energy integration into the distribution network

Large-scale renewable energy (RE) integration into the distribution network (DN) causes uncertainties due to its intermittent nature and is a challenging task today. In general RE sources are mostly connected near the end user level, i.e., in the low voltage distribution network. RE integration introduces bi-directional power flows across distribution transformer (DT) and hence DN experiences with several potential problems that includes voltage fluctuations, reactive power compensation and poor power factor in the DN. This study identifies the potential effects causes due to large-scale integration of RE into the Berserker Street Feeder, Frenchville Substation under Rockhampton DN. From the model analyses, it has clearly evident that voltage of the Berserker Street Feeder fluctuates with the increased integration of RE and causes uncertainties in the feeder as well as the DN.

Influences of wind energy integration into the distribution network

Wind energy is one of the most promising renewable energy sources due to its availability and climate-friendly attributes. Large-scale integration of wind energy sources creates potential technical challenges due to the intermittent nature that needs to be investigated and mitigated as part of developing a sustainable power system for the future. Therefore, this study developed simulation models to investigate the potential challenges, in particular voltage fluctuations, zone substation, and distribution transformer loading, power flow characteristics, and harmonic emissions with the integration of wind energy into both the high voltage (HV) and low voltage (LV) distribution network (DN). From model analysis, it has been clearly indicated that influences of these problems increase with the increased integration of wind energy into both the high voltage and low voltage distribution network, however, the level of adverse impacts is higher in the LV DN compared to the HV DN.

Stillness and movement: a bodily approach to photography

My paper will address both Duration and temporality of the ‘still’ imageand Sensorial and bodily experience of photography through a discussion of a recent body of work ‘Fly Rhythm’, a series of photographs and video works exhibited in a gallery context.By acknowledging the inter-relationship between the body and the camera my project seeks to challenge a perceived separation between performance and photography. Fly Rhythm was conceived through a performative somatic process. Through using a custom made camera I was able to negotiate time and space to create a visual drawing of movement and stillness together in photography. The resultant images are discussed as a notation of body movement – a record of bodily history enabled through a self imposed discipline of learning to read light.I initially constructed a human size camera to understand how photography works. Spending time inside observing the way light moves and affects the formation of sight is also a way of embodying the act of photography. I responded by making a bespoke camera that enabled light to be captured during extended periods while moving. My project is dependent upon a self-imposed discipline of intuiting light’s strength and erratic changes, a skill developed by making analogue prints while inside a camera obscura. Once I had developed an ability to read light’s changes and gain an understanding of camera mechanics I made durational recordings moving through the landscape on Bruny Island Tasmania and industrial sites in Melbourne, photographs exhibited as part of Fly Rhythm. I will discuss these prints in context with the idea that light is a conduit through which past and present fuse together in a bodily act of photographing and processing images.I will explore durational aspects of photography by discussing light’s relative motion while taking photographs without using the viewfinder or composing images in the traditional way. Rather, the camera at the end of my arm is directed through how I read light therefore a choreography notated in the prints – a kind of body signatureMy practice enables a new the way of seeing, in a spontaneous hand held process creating a sense of embodiment. By analyzing process my paper will consider how the body together with analogue and 21st century digital technology coalesce cross-disciplinary practice combining visual art, performance and photographic disciplines.I also explored limitations of digital light in contrast with ‘natural’ light by a making a gamut of dissolving colour determined by the software based on two pixels. Projected into the ambient light ‘Glide’ is an 11minute durational work installed at the Substation Contemporary Art Space in Melbourne Australia.

Dennis Mahoney, Electrician, Consolidated Edison Company, New York

A graduate of the New York Trade School's Electrical program in 1958, Dennis Mahoney is show at work for the Consolidated Edison Company in New York. Caption written on reverse reads "Dennis J. Mahoney is shown closing the Armature Switch of a Rotary Converter in a D.C. substation. The average rotary in our stations has a capacity of 4,200 K.W. and there are 30 such stations in Manhattan with an annual output of 800,000 amperes. Although the D.C. load is gradually being reduced, it can be seen that there is still considerable demand for direct current in Manhattan." Black and white photograph.

Manutenção produtiva total: o caso da Eletronorte

The continuous search of the increase of the productivity has been facilitating the growing diffusion of modern and advanced technologies, that open new ways for the renovation of the industrial productive process, as well as, to the appearance of modern administration systems that establish ways in direction to the democratization of the social relationships in the organizations. Accompanying that tendency and, motivated by the competitive characteristic of the market of electric energy, Eletronorte, adopted the Total Productive Maintenance - TPM, of japanese origin, as the system of administration of its productive process. This dissertation has as objective, to analyze the methodological content of the Total Productive Maintenance, showing its significance and its reach in the Regional of Transmission of Mato Grosso, adopting the post fordism, as comparison paradigm. The whole study and analysis had as focus the offices of the company and the Substation of Coxipó, placed in the city of Cuiabá, as well as the Substations of Rondonópolis and Sinop, placed in cities with the same name. The offices and the substations are geographically located in the state of Mato Grosso, and under the responsibility of the Regional of Transmission of Mato Grosso, of the Centrais Elétricas do Norte do Brasil SA - Eletronorte. The work method was of qualitative orientation and of case study, through a research of applied nature. The research was accomplished with explanatory and exploratory objectives. They were used as instruments of collection of data the analysis of documents, interviews, and application of questionnaires. The data collected through documents and of the application of questionnaires they were compiled and analyzed. The results of the interviews had for objective to confirm the consistency of the collected data. The obtained results demonstrate increases of productivity of the order of 40%, and reduction of the costs of up to 29%. The study still demonstrated, that TPM provoked significant impacts in the practices you work, denoting the presence of an action managerial dialógica. It was still characterized that the transference of TPM will depend in that context the administration system will be applied, because if this is here different from it studied, there won't be transference warranties.

Um algoritmo para estimação de estado em alimentadores de distribuição de energia elétrica com base no método da soma de potências

Most algorithms for state estimation based on the classical model are just adequate for use in transmission networks. Few algorithms were developed specifically for distribution systems, probably because of the little amount of data available in real time. Most overhead feeders possess just current and voltage measurements at the middle voltage bus-bar at the substation. In this way, classical algorithms are of difficult implementation, even considering off-line acquired data as pseudo-measurements. However, the necessity of automating the operation of distribution networks, mainly in regard to the selectivity of protection systems, as well to implement possibilities of load transfer maneuvers, is changing the network planning policy. In this way, some equipments incorporating telemetry and command modules have been installed in order to improve operational features, and so increasing the amount of measurement data available in real-time in the System Operation Center (SOC). This encourages the development of a state estimator model, involving real-time information and pseudo-measurements of loads, that are built from typical power factors and utilization factors (demand factors) of distribution transformers. This work reports about the development of a new state estimation method, specific for radial distribution systems. The main algorithm of the method is based on the power summation load flow. The estimation is carried out piecewise, section by section of the feeder, going from the substation to the terminal nodes. For each section, a measurement model is built, resulting in a nonlinear overdetermined equations set, whose solution is achieved by the Gaussian normal equation. The estimated variables of a section are used as pseudo-measurements for the next section. In general, a measurement set for a generic section consists of pseudo-measurements of power flows and nodal voltages obtained from the previous section or measurements in real-time, if they exist -, besides pseudomeasurements of injected powers for the power summations, whose functions are the load flow equations, assuming that the network can be represented by its single-phase equivalent. The great advantage of the algorithm is its simplicity and low computational effort. Moreover, the algorithm is very efficient, in regard to the accuracy of the estimated values. Besides the power summation state estimator, this work shows how other algorithms could be adapted to provide state estimation of middle voltage substations and networks, namely Schweppes method and an algorithm based on current proportionality, that is usually adopted for network planning tasks. Both estimators were implemented not only as alternatives for the proposed method, but also looking for getting results that give support for its validation. Once in most cases no power measurement is performed at beginning of the feeder and this is required for implementing the power summation estimations method, a new algorithm for estimating the network variables at the middle voltage bus-bar was also developed

Determinação de Chaveamento para Recomposição do Serviço em Redes de Distribuição de Energia Elétrica em Média Tensão Através de Métodos Baseado em Parâmetros de Sensibilidade

The reconfiguration of a distribution network is a change in its topology, aiming to provide specific operation conditions of the network, by changing the status of its switches. It can be performed regardless of any system anomaly. The service restoration is a particular case of reconfiguration and should be performed whenever there is a network failure or whenever one or more sections of a feeder have been taken out of service for maintenance. In such cases, loads that are supplied through lines sections that are downstream of portions removed for maintenance may be supplied by the closing of switches to the others feeders. By classical methods of reconfiguration, several switches may be required beyond those used to perform the restoration service. This includes switching feeders in the same substation or for substations that do not have any direct connection to the faulted feeder. These operations can cause discomfort, losses and dissatisfaction among consumers, as well as a negative reputation for the energy company. The purpose of this thesis is to develop a heuristic for reconfiguration of a distribution network, upon the occurrence of a failure in this network, making the switching only for feeders directly involved in this specific failed segment, considering that the switching applied is related exclusively to the isolation of failed sections and bars, as well as to supply electricity to the islands generated by the condition, with significant reduction in the number of applications of load flows, due to the use of sensitivity parameters for determining voltages and currents estimated on bars and lines of the feeders directly involved with that failed segment. A comparison between this process and classical methods is performed for different test networks from the literature about networks reconfiguration

Desenvolvimento de um protocolo de comunicação para automação de subestações móveis via satélite

One of the most important decisions to turn a substation automatic and no attended it relates to the communication media between this substation and Operation Center. Generally energy companies uses radio or optic fiber, depending of distances and infrastructure of each situation. This rule applies to common substations. Mobile substations are a particular case, therefore they are conceived for use at provisional situations, emergencies, preventive or corrective maintenance. Thus the telecommunication solution used at common substations are not applied so easily to mobile substations, due absence of infrastructure (media) or difficulty to insert the mobile substation data in existing automation network not long. The ideal media must supply covering in a great geographic area to satisfy presented requirements. The implantation costs of this big infrastructure are expensive, however a existing operator may be used. Two services that fulfill that requirements are satellite and cellular telephony. This work presents a solution for automation of mobile substations through satellite. It was successfully implanted at a brazilian electric energy concessionaire named COSERN. The operation became transparent to operators. Other gotten benefits had been operational security, quality in the supply of electric energy and costs reduction. The project presented is a new solution, designed to substations and general applications where few data should be transmitted, but there is difficulties in relation to the media. Despite the satellite having been used, the same resulted can be gotten using celullar telephony, through Short Messages or packet networks as GPRS or EDGE.

Sistema de tração elétrica flexível baseado em veículos trólebus para alimentação com redes CC e ou CA

Este artigo apresenta os principais resultados e o detalhamento da metodologia e equações de controle de um retificador monofásico pré-regulador de 150kW para sistema trólebus. A estrutura proposta possibilita a Correção ativa do Fator de Potência (CFP) com baixos níveis de Distorção Harmônica Total (DHT) na corrente, em conformidade com a norma internacional IEC 61000-3-4. Fruto de um projeto de Pesquisa, Desenvolvimento e Inovação (P) junto à empresa AES Eletropaulo Metropolitana de São Paulo, em parceria com a empresa de transporte Himalaia S.A., o projeto possui como principais objetivos estimular o interesse para a expansão das linhas de trólebus a partir de uma plataforma de alimentação de menor custo de instalação e manutenção, sem a necessidade de subestações retificadoras, e, com vistas a promover a melhoria da qualidade de vida nos grandes centros urbanos. Nessa nova modalidade proposta para o sistema de alimentação, o trólebus pode ser alimentado tanto pelas redes convencionais em corrente contínua (CC) quanto pelas redes de distribuição em corrente alternada (CA), mantendo-se a disposição a dois fios dos sistemas CC, sendo as mudanças de rede de alimentação (CC ou CA) monitoradas e controladas digitalmente. Todo o sistema de gerenciamento e controle do conversor é realizado digitalmente por FPGA XC3S200. Na evolução do sistema proposto, os autores pretendem inclusive eliminar as linhas aéreas de alimentação, através da utilização de postos de alimentação em CA, especialmente desenvolvidos para os pontos de embarque/desembarque de passageiros para este veículo de transporte coletivo, eliminando-se os aspectos visuais negativos das redes de alimentação deste modal, e, reduzindo-se as falhas de operação do sistema.

A Constructive Heuristic Algorithm for Distribution System Planning

A constructive heuristic algorithm (CHA) to solve distribution system planning (DSP) problem is presented. The DSP is a very complex mixed binary nonlinear programming problem. A CHA is aimed at obtaining an excellent quality solution for the DSP problem. However, a local improvement phase and a branching technique were implemented in the CHA to improve its solution. In each step of the CHA, a sensitivity index is used to add a circuit or a substation to the distribution system. This sensitivity index is obtained by solving the DSP problem considering the numbers of circuits and substations to be added as continuous variables (relaxed problem). The relaxed problem is a large and complex nonlinear programming and was solved through an efficient nonlinear optimization solver. Results of two tests systems and one real distribution system are presented in this paper in order to show the ability of the proposed algorithm.