Report of the training programme on Essential Ecosystem Approach to Fisheries Management (EAFM): developing capacity in the EAFM, Chennai, India, 11-16 August, 2014

Participants were exposed to concepts and information about EAFM using a structured, participatory method of delivery. The learning strategy involved specifically designed exercises, using real examples, to consolidate learning. Daily monitoring and reviews were conducted together with pre-and post-course assessment.

Enhanced integrated modelling approach to reconfiguring manufacturing enterprises

Dynamism and uncertainty are real challenges for present day manufacturing enterprises (MEs). Reasons include: an increasing demand for customisation, reduced time to market, shortened product life cycles and globalisation. MEs can reduce competitive pressure by becoming reconfigurable and change-capable. However, modern manufacturing philosophies, including agile and lean, must complement the application of reconfigurable manufacturing paradigms. Choosing and applying the best philosophies and techniques is very difficult as most MEs deploy complex and unique configurations of processes and resource systems, and seek economies of scope and scale in respect of changing and distinctive product flows. It follows that systematic methods of achieving model driven reconfiguration and interoperation of component based manufacturing systems are required to design, engineer and change future MEs. This thesis, titled Enhanced Integrated Modelling Approach to Reconfiguring Manufacturing Enterprises , introduces the development and prototyping a model-driven environment for the design, engineering, optimisation and control of the reconfiguration of MEs with an embedded capability to handle various types of change. The thesis describes a novel systematic approach, namely enhanced integrated modelling approach (EIMA), in which coherent sets of integrated models are created that facilitates the engineering of MEs especially their production planning and control (PPC) systems. The developed environment supports the engineering of common types of strategic, tactical and operational processes found in many MEs. The EIMA is centred on the ISO standardised CIMOSA process modelling approach. Early study led to the development of simulation models during which various CIMOSA shortcomings were observed, especially in its support for aspects of ME dynamism. A need was raised to structure and create semantically enriched models hence forming an enhanced integrated modelling environment. The thesis also presents three industrial case examples: (1) Ford Motor Company; (2) Bradgate Furniture Manufacturing Company; and (3) ACM Bearings Company. In order to understand the system prior to realisation of any PPC strategy, multiple process segments of any target organisation need to be modelled. Coherent multi-perspective case study models are presented that have facilitated process reengineering and associated resource system configuration. Such models have a capability to enable PPC decision making processes in support of the reconfiguration of MEs. During these case studies, capabilities of a number of software tools were exploited such as Arena®, Simul8®, Plant Simulation®, MS Visio®, and MS Excel®. Case study results demonstrated effectiveness of the concepts related to the EIMA. The research has resulted in new contributions to knowledge in terms of new understandings, concepts and methods in following ways: (1) a structured model driven integrated approach to the design, optimisation and control of future reconfiguration of MEs. The EIMA is an enriched and generic process modelling approach with capability to represent both static and dynamic aspects of an ME; and (2) example application cases showing benefits in terms of reduction in lead time, cost and resource load and in terms of improved responsiveness of processes and resource systems with a special focus on PPC; (3) identification and industrial application of a new key performance indicator (KPI) known as P3C the measuring and monitoring of which can aid in enhancing reconfigurability and responsiveness of MEs; and (4) an enriched modelling concept framework (E-MUNE) to capture requirements of static and dynamic aspects of MEs where the conceptual framework has the capability to be extended and modified according to the requirements. The thesis outlines key areas outlining a need for future research into integrated modelling approaches, interoperation and updating mechanisms of partial models in support of the reconfiguration of MEs.

A magnetic, luminescent and mesoporous core-shell structured composite material as drug carrier

In this paper, hydrothermal synthesized Fe3O4 microspheres have been encapsulated with nonporous silica and a further layer of ordered mesoporous silica through a simple sol-gel process. The surface of the outer silica shell was further functionalized by the deposition of YVO4:Eu3+ phosphors, realizing a sandwich structured material with mesoporous, magnetic and luminescent properties. The multifunctional system was used as drug carrier to investigate the storage and release properties using ibuprofen (IBU) as model drug by the surface modification. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS), Fourier transform infrared spectroscopy (FT-IR), N-2 adsorption/desorption, photoluminescence (PL) spectra, and superconducting quantum interference device (SQUID) were used to characterized the samples.

Patterned self-adaptive polymer brushes by "grafting to" approach and microcontact printing

Patterned self-adaptive PS/P2VP mixed polymer brushes were prepared by "grafting to" approach combining with microcontact printing (muCP). The properties of the patterned surface were investigated by lateral force microscopy (LFM), XPS and water condensation figures. In the domains with grafted P2VP, the PS/P2VP mixed brushes demonstrated reversible switching behavior upon exposure to selective solvents for different components. The chemical composition of the top layer as well as the surface wettability can be well tuned due to the perpendicular phase segregation in the mixed brushes. While in the domains without grafted P2VP, the grafted PS did not have the capability of switching. The development and erasing of the pattern is reversible under different solvent treatment.

TEMPEST: A Template Editor for Structured Text

TEMPEST is a full-screen text editor that incorporates a structural paradigm in addition to the more traditional textual paradigm provided by most editors. While the textual paradigm treats the text as a sequence of characters, the structural paradigm treats it as a collection of named blocks which the user can define, group, and manipulate. Blocks can be defined to correspond to the structural features of he text, thereby providing more meaningful objects to operate on than characters of lines. The structural representation of the text is kept in the background, giving TEMPEST the appearance of a typical text editor. The structural and textual interfaces coexist equally, however, so one can always operate on the text from wither point of view. TEMPEST's representation scheme provides no semantic understanding of structure. This approach sacrifices depth, but affords a broad range of applicability and requires very little computational overhead. A prototype has been implemented to illustrate the feasibility and potential areas of application of the central ideas. It was developed and runs on an IBM Personal Computer.

Una testimonianza silenziosa.Storia della Chiesa cattolica in Tunisia dal Trattato del Bardo alla ‘rivoluzione dei gelsomini’

The work examines the change involving the Church in Tunisia from the period of the Protectorate to the present through the fundamental moments of independence (1956) and the signing of the ‘Modus vivendi’ (1964). In the first structure of the “modern” Church, a fundamental role was played by the complex figure of the French Cardinal Charles-Allemand Lavigerie who, while giving strong impulse to setting up disinterested charitable social initiatives by the congregations (Pères Blancs, Soeurs Blanches and others), also represented the ideal of the ‘evangelizing’ (as well as colonial) Church which, despite its declared will to avoid proselytism, almost inevitably tended to slip into it. During the French Protectorate (1881-1956) the ecclesiastic institution concentrated strongly on itself, with little heed for the sensitivity of its host population, and developed its activities as if it were in a European country. From the social standpoint, the Church was mostly involved in teaching, which followed the French model, and health facilities. In the Church only the Pères Blancs missionaries were sincerely committed to promoting awareness of the local context and dialogue with the Muslims. The Catholic clergy in the country linked its religious activity close to the policy of the Protectorate, in the hope of succeeding in returning to the ancient “greatness of the African Church”, as the Eucharistic Congress in Carthage in 1930 made quite clear. The Congress itself planted the first seed in the twentyfive- year struggle that led the Tunisian population to independence in 1956 and the founding of the Republic in 1957. The conquest of independence and the ‘Modus vivendi’ marked a profound change in the situation and led to an inversion of roles: the Catholic community was given the right to exist only on the condition that it should not interfere in Tunisian society. The political project of Bourguiba, who led the Republic from 1957 to 1987, aimed to create a strongly egalitarian society, with a separation between political and religious powers. In particular, in referring to the Church, he appeared as a secularist with no hostility towards the Catholics who were, however, considered as “cooperators”, welcome so long as they were willing to place their skills at the service of the construction of the state. So, in the catholic Community was a tension between the will of being on the side of the country and that of conserving a certain distance from it and not being an integral part of it. In this process of reflection, the role of the Second Vatican Council was fundamental: it spread the idea of a Church open to the world and the other religions, in particular to Islam: the teaching of the Council led the congregations present in the country to accept the new condition. This new Church that emerged from the Council saw some important events in the process of “living together”, of “cultural mixing” and the search for a common ground between different realities. The almost contemporary arrival of Arab bishops raised awareness among the Tunisians of the existence of Christian Arabs and, at the same time, the Catholic community began considering their faith in a different way. In the last twenty years the situation has continued to change. Side by side with the priests present for decades or even those born there, some new congregations have begun to operate, albeit in small numbers: they have certainly revitalized the community of the faithful, but they sometimes appear more devoted to service “within” the Church, than to services for the population, and are thus characterized by exterior manifestations of their religion. This sort of presence has made it possible for Bourguiba's successor, Ben Ali (president from 1987 to 2011), to practice forms of tolerance even more clearly, but always limited to formal relations; the Tunisians are still far from having a real understanding of the Catholic reality, with certain exceptions connected to relations on a personal and not structured plane, as was the case in the previous period. The arrival of a good number of young people from sub-Saharan Africa, most of all students, belonging to the JCAT, and personnel of the BAD has “Africanized” the Church in Tunisia and has brought about an increase in Christians' exterior manifestations; but this is a visibility that is not blatant but discreet, with the implicit risk of the Church continuing to be perceived as a sort of exterior body, alien to the country; nor can we say, lacking proper documentation, how it will be possible to build a bridge between different cultures through the “accompaniment” of Christian wives of Tunisians. Today, the Church is living in a country that has less and less need of it; its presence, in the schools and in health facilities, is extremely reduced. And also in other sectors of social commitment, such as care for the disabled, the number of clergymen involved is quite small. The ‘revolution’ in 2011 and the later developments up to the present have brought about another socio-political change, characterized by a climate of greater freedom, but with as yet undefinable contours. This change in the political climate will inevitable have consequences in Tunisia’s approach to religious and cultural minorities, but it is far too soon to discuss this on the historical and scientific planes.

Entrepreneurship and rural economic development: a scenario analysis approach

Fuller-Love, N., Midmore, P., Thomas, D., Henley, A. (2006). Entrepreneurship and rural economic development: A scenario analysis approach. International Journal of Entrepreneurial Behaviour and Research, 12 (5), 289-305. RAE2008

Rambo's Interdisciplinary Approach to Religious Conversion: The Case of St. Augustine

This dissertation illustrates the merits of an interdisciplinary approach to religious conversion by employing Lewis Rambo’s systemic stage model to illumine the process of St. Augustine’s conversion. Previous studies of Augustine’s conversion have commonly explored his narrative of transformation from the perspective of one specific discipline, such as theology, history, or psychology. In doing so, they have necessarily restricted attention to a limited set of questions and problems. By bringing these disciplines into a structured, critical conversation, this study demonstrates how formulating and responding to the interplay among personal, social, cultural, and religious dimensions of Augustine’s conversion process may eventuate in the consideration of issues previously unarticulated and thus unaddressed. Rambo (1993) formulates a model of religious change that consists of what he calls context, crisis, quest, encounter, interaction, commitment, and consequences. Change is explained by drawing upon the research and scholarship of psychologists, sociologists, anthropologists, and religionists, in conjunction with the contributions of theologians. This study unfolds in the following chapters: I. Introduction; II. Literature review of scholarship about conversion, with emphasis on explication of Rambo’s model; III. A description of the case of Augustine, drawn from a close reading of the Confessions; IV. Literature review of scholarship about Augustine’s conversion; V. Interdisciplinary interpretation of Augustine’s conversion; and VI. Implications for scholars of conversion, and for pastoral caregivers, as well as recommendations for future research. This dissertation demonstrates how Augustine’s conversion experience was deeply influenced by 1) psychological distress and crisis; 2) the quest to know himself and the divine; 3) interactions with significant others; 4) participation in Christian communities; 5) philosophical and cultural changes; and 6) the encounter with the divine. As such, this study reveals the value of interpreting Augustine’s conversion as an evolving process constituted in multiple factors that can be differentiated from one another, yet clearly interact with one another. It examines the implications of constructing an interdisciplinary approach to Augustine’s conversion narrative for both the academy and the Christian community, and recommends the use of Rambo’s model in studies of other cases of religious change.

Public evaluations of novel food technologies: a qualitative citizen-scientist deliberative discourse approach

This qualitative research expands understanding of how information about a range of Novel Food Technologies (NFTs) is used and assimilated, and the implications of this on the evolution of attitudes and acceptance. This work enhances theoretical and applied understanding of citizens’ evaluative processes around these technologies. The approach applied involved observations of interactive exchanges between citizens and information providers (i.e. food scientists), during which they discussed a specific technology. This flexible, yet structured, approach revealed how individuals construct meaning around information about specific NFTs. A rich dataset of 42 ‘deliberate discourse’ and 42 postdiscourse transcripts was collected. Data analysis encompassed three stages: an initial descriptive account of the complete dataset based on the top-down bottom-up (TDBU) model of attitude formation, followed by inductive and deductive thematic analysis across the selected technology groups. The hybrid thematic analysis undertaken identified a Conceptual Model, which represents a holistic perspective on the influences and associated features directing ‘sense-making’ and ultimate evaluations around the technology clusters. How individuals make sense of these technologies is shaped by: their beliefs, values and personal characteristics; their perceptions of power and control over the application of the technology; and, the assumed relevance of the technology and its applications within different contexts. These influences form the frame for the creation of sense-making around the technologies. Internal negotiations between these influences are evident and evaluations are based on the relative importance of each influence to the individual, which tend to contribute to attitude ambivalence and instability. The findings indicate the processes of forming and changing attitudes towards these technologies are: complex; dependent on characteristics of the individual, technology, application and product; and, impacted by the nature and forms of information provided. Challenges are faced in engaging with the public about these technologies, as levels of knowledge, understanding and interest vary.

Bayesian variable selection in structured high-dimensional covariate spaces with applications in genomics

We consider the problem of variable selection in regression modeling in high-dimensional spaces where there is known structure among the covariates. This is an unconventional variable selection problem for two reasons: (1) The dimension of the covariate space is comparable, and often much larger, than the number of subjects in the study, and (2) the covariate space is highly structured, and in some cases it is desirable to incorporate this structural information in to the model building process. We approach this problem through the Bayesian variable selection framework, where we assume that the covariates lie on an undirected graph and formulate an Ising prior on the model space for incorporating structural information. Certain computational and statistical problems arise that are unique to such high-dimensional, structured settings, the most interesting being the phenomenon of phase transitions. We propose theoretical and computational schemes to mitigate these problems. We illustrate our methods on two different graph structures: the linear chain and the regular graph of degree k. Finally, we use our methods to study a specific application in genomics: the modeling of transcription factor binding sites in DNA sequences. © 2010 American Statistical Association.

Structured Illumination Microscopy and a Quantitative Image Analysis for the Detection of Positive Margins in a Pre-Clinical Genetically Engineered Mouse Model of Sarcoma.

Intraoperative assessment of surgical margins is critical to ensuring residual tumor does not remain in a patient. Previously, we developed a fluorescence structured illumination microscope (SIM) system with a single-shot field of view (FOV) of 2.1 × 1.6 mm (3.4 mm2) and sub-cellular resolution (4.4 μm). The goal of this study was to test the utility of this technology for the detection of residual disease in a genetically engineered mouse model of sarcoma. Primary soft tissue sarcomas were generated in the hindlimb and after the tumor was surgically removed, the relevant margin was stained with acridine orange (AO), a vital stain that brightly stains cell nuclei and fibrous tissues. The tissues were imaged with the SIM system with the primary goal of visualizing fluorescent features from tumor nuclei. Given the heterogeneity of the background tissue (presence of adipose tissue and muscle), an algorithm known as maximally stable extremal regions (MSER) was optimized and applied to the images to specifically segment nuclear features. A logistic regression model was used to classify a tissue site as positive or negative by calculating area fraction and shape of the segmented features that were present and the resulting receiver operator curve (ROC) was generated by varying the probability threshold. Based on the ROC curves, the model was able to classify tumor and normal tissue with 77% sensitivity and 81% specificity (Youden's index). For an unbiased measure of the model performance, it was applied to a separate validation dataset that resulted in 73% sensitivity and 80% specificity. When this approach was applied to representative whole margins, for a tumor probability threshold of 50%, only 1.2% of all regions from the negative margin exceeded this threshold, while over 14.8% of all regions from the positive margin exceeded this threshold.

Automatic and effective multi-dimensional parallelisation of structured mesh based codes

The most common parallelisation strategy for many Computational Mechanics (CM) (typified by Computational Fluid Dynamics (CFD) applications) which use structured meshes, involves a 1D partition based upon slabs of cells. However, many CFD codes employ pipeline operations in their solution procedure. For parallelised versions of such codes to scale well they must employ two (or more) dimensional partitions. This paper describes an algorithmic approach to the multi-dimensional mesh partitioning in code parallelisation, its implementation in a toolkit for almost automatically transforming scalar codes to parallel form, and its testing on a range of ‘real-world’ FORTRAN codes. The concept of multi-dimensional partitioning is straightforward, but non-trivial to represent as a sufficiently generic algorithm so that it can be embedded in a code transformation tool. The results of the tests on fine real-world codes demonstrate clear improvements in parallel performance and scalability (over a 1D partition). This is matched by a huge reduction in the time required to develop the parallel versions when hand coded – from weeks/months down to hours/days.

Numerical simulation of microwave thawing using a coupled solver approach

Thawing of a frozen food product in a domestic microwave oven is numerically simulated using a coupled solver approach. The approach consists of a dedicated electromagnetic FDTD solver and a closely coupled UFVM multi-physics package. Two overlapping numerical meshes are defined; the food material and container were meshed for heat transfer and phase change solution, whilst the microwave oven cavity and waveguide were meshed for the microwave irradiation. The two solution domains were linked using a cross-mapping routine. This approach allowed the rotation of the food load to be captured. Power densities obtained on the structured FDTD mesh were interpolated onto the UFVM mesh for each timestep/turntable position. The UFVM solver utilised the power density data to advance the temperature and phase distribution solution. The temperature-dependant dielectric and thermo-physical properties of the food load were updated prior to revising the electromagnetic solution. Changes in thermal/electric properties associated with the phase transition were fully accounted for as well as heat losses from product to cavity. Two scenarios were investigated: a centric and eccentric placement on the turntable. Developing temperature fields predicted by the numerical solution are validated against experimentally obtained data. Presented results indicate the feasibility of fully coupled simulations of the microwave heating of a frozen product. (© 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)

Structured reflection breaks embedded in an online course – effects on learning experience, time on task and performance

The purpose of this article is to gain an insight into the effects of practicing short, frequent,and structured reflection breaks interspersed with the learning material in a computer-based course. To that end, the study sets up a standardized control trial with two groups of secondary school pupils. The study shows that while performance is not affected by these embedded “reflection rituals,” they significantly impact time on task and perceived learning. The study also suggests that the exposure to such built-in opportunities for reflection modifies the engagement with the content and fosters the claimed readiness for application of a similar reflective approach to learning in other occasions.

Efficient FPGA Hardware Development: A Multi-Language Approach

This paper presents a multi-language framework to FPGA hardware development which aims to satisfy the dual requirement of high-level hardware design and efficient hardware implementation. The central idea of this framework is the integration of different hardware languages in a way that harnesses the best features of each language. This is illustrated in this paper by the integration of two hardware languages in the form of HIDE: a structured hardware language which provides more abstract and elegant hardware descriptions and compositions than are possible in traditional hardware description languages such as VHDL or Verilog, and Handel-C: an ANSI C-like hardware language which allows software and hardware engineers alike to target FPGAs from high-level algorithmic descriptions. On the one hand, HIDE has proven to be very successful in the description and generation of highly optimised parameterisable FPGA circuits from geometric descriptions. On the other hand, Handel-C has also proven to be very successful in the rapid design and prototyping of FPGA circuits from algorithmic application descriptions. The proposed integrated framework hence harnesses HIDE for the generation of highly optimised circuits for regular parts of algorithms, while Handel-C is used as a top-level design language from which HIDE functionality is dynamically invoked. The overall message of this paper posits that there need not be an exclusive choice between different hardware design flows. Rather, an integrated framework where different design flows can seamlessly interoperate should be adopted. Although the idea might seem simple prima facie, it could have serious implications on the design of future generations of hardware languages.