Macroeconomic trade-offs and external vulnerabilities of human development in Nicaragua

Nicaragua is making progress towards the Millennium Development Goals, but is set to miss a number of targets in 2015. This paper’s general equilibrium analysis shows that it is unfeasible for the government to step up spending in order to meet these targets by the 2015 deadline. Any boost to public spending and financing would have to be front-loaded, which would entail pernicious macroeconomic trade-offs. A more realistic scenario would be to postpone meeting the goals until 2020. In that case, the allocation of public spending would spur economic growth without causing macroeconomic hardships, although the country would nevertheless remain highly vulnerable to external shocks.

Micro-inverter for integrated grid-tie photovoltaic module using resonant controller

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Microinversor integrado ao módulo fotovoltaico para sistemas conectados à rede elétrica utilizando controlador ressonante

This paper shows the modeling and control of a single-phase full-bridge inverter with high-frequency transformer that may be used as part of a two-stage converter with transformerless DC-DC side or as a single-stage converter (simple DC-AC converter) for grid-connected PV applications. The inverter is modeled in order to obtain a small-signal transfer function used to design the P+Resonant current controller. A highfrequency step-up transformer results in reduced voltage switches and better efficiency compared with converters in which the transformer is used on the DC-DC side. Simulations and experimental results with a 200 W prototype are shown. 1

Inactivating Mutations of the Human Luteinizing Hormone Receptor in Both Sexes

The human luteinizing hormone/chorionic gonadotropin receptor (LHCGR) plays a fundamental role in male and female reproductive physiology. Over the past 15 years, several homozygous or compound heterozygous loss-of-function mutations in the LHCGR gene have been described in males and females. In genetic males, mutations in LHCGR were associated with distinct degrees of impairment in pre- and postnatal testosterone secretion resulting in a phenotypic spectrum. Patients with the severe form of LH resistance have predominantly female external genitalia and absence of secondary sex differentiation at puberty. Patients with milder forms have predominantly male external genitalia with micropenis and/or hypospadias or only infertility without ambiguity. The undermasculization is associated with low basal, as well as human CG-stimulated, testosterone levels and elevated LH levels after pubertal age, without abnormal step-up in testosterone biosynthesis precursors. The testes have only slightly reduced size but mature Leydig cells are absent or scarce (Leydig cell hypoplasia). Genetic females with inactivating LHCGR mutations have female external genitalia, spontaneous breast and pubic hair development at puberty, and normal or late menarche followed by oligoamenorrhea and infertility. Estradiol and progesterone levels are normal for the early to midfollicular phase, but do not reach ovulatory or luteal phase levels. Serum LH levels are high whereas follicle-stimulating hormone levels are normal or only slightly increased. Pelvic ultrasound has demonstrated a small or normal uterus and normal or enlarged ovaries with cysts. The inactivating mutations of the LHCGR have provided important insights into distinct physiological roles of LH in reproduction of both sexes.

Addition of increasing doses of ricinoleic acid from castor oil (Ricinus communis L.) in diets of Nellore steers in feedlots

The aim of this study was to evaluate the performance and blood parameters of feedlot Nellore cattle fed increasing doses of ricinoleic acid (RA) in the diet. Ninety-six Nellore steers divided into 12 groups of 8 animals were used. The animals were randomly assigned to four treatments: 0, 1, 2, or 4 g of RA/animal/day, with three replicates per treatment. The experimental period consisted of 84 days divided into three 28-day periods preceded by three step-up diets. A quadratic effect was found for average daily gain and final body weight, as well as for leukocyte and lymphocyte counts, and for urea and blood urea nitrogen. A linear effect was observed for albumin, alkaline phosphatase, and gamma glutamyl transferase. The inclusion of 2 g of RA daily improved the performance of feedlot Nellore steers.

A video database for facial behavior understanding

[EN]The use of new technologies in order to step up the inter- action between humans and machines is the main proof that faces are important in videos. Therefore we suggest a novel Face Video Database for development, testing and veri cation of algorithms related to face- based applications and to facial recognition applications. In addition of facial expression videos, the database includes body videos. The videos are taken by three di erent cameras, working in real time, without vary- ing illumination conditions.

Circuiti per la conversione di micro potenze da gradienti termici ambientali

In questa tesi vengono analizzati alcuni schemi circuitali di convertitori di micro potenze da generatori termoelettrici sottoposti a gradienti di temperatura limitati. I circuiti, basati su oscillatori step-up in grado di innescarsi con tensioni di alimentazione estremamente basse, sono stati analizzati dal punto di vista teorico e mediante successive simulazioni circuitali. Le potenze ottenibili con gradienti di temperatura inferiori a 10K risultano tipicamente comprese tra qualche uW e qualche decina di uW, con efficienze fino a circa il 40%.

Ultrasonographic-guided ilioinguinal/iliohypogastric nerve block in pediatric anesthesia: what is the optimal volume?

Recently, our study group demonstrated the usefulness of ultrasonographic guidance in ilioinguinal/iliohypogastric nerve blocks in children. As a consequence, we designed a follow-up study to evaluate the optimal volume of local anesthetic for this regional anesthetic technique. Using a modified step-up-step-down approach, with 10 children in each study group, a starting dose of 0.2 mL/kg of 0.25% levobupivacaine was administered to perform an ilioinguinal/iliohypogastric nerve block under ultrasonographic guidance. After each group of 10 patients, the results were analyzed, and if all blocks were successful, the volume of local anesthetic was decreased by 50%, and a further 10 patients were enrolled into the study. Failure to achieve a 100% success rate within a group subjected patients to an automatic increase of half the previous volume reduction to be used in the subsequent group. Using 0.2 and 0.1 mL/kg of 0.25% levobupivacaine, the success rate was 100%. With a volume of 0.05 mL/kg of 0.25% levobupivacaine, 4 of 10 children received additional analgesia because of an inadequate block. Therefore, according to the protocol, the amount was increased to 0.075 mL/kg of 0.25% levobupivacaine, where the success rate was again 100%. We conclude that ultrasonographic guidance for ilioinguinal/iliohypogastric nerve blocks in children allowed a reduction of the volume of local anesthetic to 0.075 mL/kg.

Myocardial bridging: depiction rate and morphology at CT coronary angiography--comparison with conventional coronary angiography

PURPOSE: To prospectively assess the depiction rate and morphologic features of myocardial bridging (MB) of coronary arteries with 64-section computed tomographic (CT) coronary angiography in comparison to conventional coronary angiography. MATERIALS AND METHODS: Patients were simultaneously enrolled in a prospective study comparing CT and conventional coronary angiography, for which ethics committee approval and informed consent were obtained. One hundred patients (38 women, 62 men; mean age, 63.8 years +/- 11.6 [standard deviation]) underwent 64-section CT and conventional coronary angiography. Fifty additional patients (19 women, 31 men; mean age, 59.2 years +/- 13.2) who underwent CT only were also included. CT images were analyzed for the direct signs length, depth, and degree of systolic compression, while conventional angiograms were analyzed for the indirect signs step down-step up phenomenon, milking effect, and systolic compression of the tunneled segment. Statistical analysis was performed with Pearson correlation analysis, the Wilcoxon two-sample test, and Fisher exact tests. RESULTS: MB was detected with CT in 26 (26%) of 100 patients and with conventional angiography in 12 patients (12%). Mean tunneled segment length and depth at CT (n = 150) were 24.3 mm +/- 10.0 and 2.6 mm +/- 0.8, respectively. Systolic compression in the 12 patients was 31.3% +/- 11.0 at CT and 28.2% +/- 10.5 at conventional angiography (r = 0.72, P < .001). With CT, a significant correlation was not found between systolic compression and length (r = 0.16, P = .25, n = 150) but was found with depth (r = 0.65, P < .01, n = 150) of the tunneled segment. In 14 patients in whom MB was found at CT but not at conventional angiography, length, depth, and systolic compression were significantly lower than in patients in whom both modalities depicted the anomaly (P < .001, P < .01, and P < .001, respectively). CONCLUSION: The depiction rate of MB is greater with 64-section CT coronary angiography than with conventional coronary angiography. The degree of systolic compression of MB significantly correlates with tunneled segment depth but not length.

Household Hardships, Public Programs, and Their Associations with the Health and Development of Very Young Children: Insights from Children’s HealthWatch

America’s low-income families struggle to protect their children from multiple threats to their health and growth. Many research and advocacy groups explore the health and educational effects of food insecurity, but less is known about these effects on very young children. Children’s HealthWatch, a group of pediatric clinicians and public health researchers, has continuously collected data on the effects of food insecurity alone and in conjunction with other household hardships since 1998. The group’s peer reviewed research has shown that a number of economic risks at the household level, including food, housing and energy insecurity, tend to be correlated. These insecurities alone or in conjunction increase the risk that a young child will suffer various negative health consequences, including increases in lifetime hospitalizations, parental report of fair or poor health,1 or risk for developmental delays.2 Child food insecurity is an incremental risk indicator above and beyond the risk imposed by household-level food insecurity. The Children’sHealthwatch research also suggests public benefits programs modify some of these effects for families experiencing hardships. This empirical evidence is presented in a variety of public venues outside the usual scientific settings, such as congressional hearings, to support the needs of America’s most vulnerable population through policy change. Children’s HealthWatch research supports legislative solutions to food insecurity, including sustained funding for public programs and re-evaluation of the use of the Thrifty Food Plan as the basis of SNAP benefits calculations. Children’s HealthWatch is one of many models to support the American Academy of Pediatrics’ call to “stand up, speak up, and step up for children.”3 No isolated group or single intervention will solve child poverty or multiple hardships. However, working collaboratively each group has a role to play in supporting the health and well-being of young children and their families. 1. Cook JT, Frank DA, Berkowitz C, et al. Food insecurity is associated with adverse health outcomes among human infants and toddlers. J Nutr. 2004;134:1432-1438. 2. Rose-Jacobs R, Black MM, Casey PH, et al. Household food insecurity: associations with at-risk infant and toddler development. Pediatrics. 2008;121:65-72. 3. AAP leader says to stand up, speak up, and step up for child health [news release]. Boston, MA: American Academy of Pediatrics; October 11, 2008. http://www2.aap.org/pressroom/nce/nce08childhealth.htm. Accessed January 1, 2012.

Establishing occupational and environmental health design requirements for Lunar and Mars settlements

In a study of Lunar and Mars settlement concepts, an analysis was made of fundamental design assumptions in five technical areas against a model list of occupational and environmental health concerns. The technical areas included the proposed science projects to be supported, habitat and construction issues, closed ecosystem issues, the "MMM" issues--mining, material-processing, and manufacturing, and the human elements of physiology, behavior and mission approach. Four major lessons were learned. First it is possible to relate public health concerns to complex technological development in a proactive design mode, which has the potential for long-term cost savings. Second, it became very apparent that prior to committing any nation or international group to spending the billions to start and complete a lunar settlement, over the next century, that a significantly different approach must be taken from those previously proposed, to solve the closed ecosystem and "MMM" problems. Third, it also appears that the health concerns and technology issues to be addressed for human exploration into space are fundamentally those to be solved for human habitation of the earth (as a closed ecosystem) in the 21st century. Finally, it is proposed that ecosystem design modeling must develop new tools, based on probabilistic models as a step up from closed circuit models. ^

Prevalence and Risk Factors for Therapy Escalation in Ulcerative Colitis in the Swiss IBD Cohort Study.

BACKGROUND Physicians traditionally treat ulcerative colitis (UC) using a step-up approach. Given the paucity of data, we aimed to assess the cumulative probability of UC-related need for step-up therapy and to identify escalation-associated risk factors. METHODS Patients with UC enrolled into the Swiss IBD Cohort Study were analyzed. The following steps from the bottom to the top of the therapeutic pyramid were examined: (1) 5-aminosalicylic acid and/or rectal corticosteroids, (2) systemic corticosteroids, (3) immunomodulators (IM) (azathioprine, 6-mercaptopurine, methotrexate), (4) TNF antagonists, (5) calcineurin inhibitors, and (6) colectomy. RESULTS Data on 996 patients with UC with a median disease duration of 9 years were examined. The point estimates of cumulative use of different treatments at years 1, 5, 10, and 20 after UC diagnosis were 91%, 96%, 96%, and 97%, respectively, for 5-ASA and/or rectal corticosteroids, 63%, 69%, 72%, and 79%, respectively, for systemic corticosteroids, 43%, 57%, 59%, and 64%, respectively, for IM, 15%, 28%, and 35% (up to year 10 only), respectively, for TNF antagonists, 5%, 9%, 11%, and 12%, respectively, for calcineurin inhibitors, 1%, 5%, 9%, and 18%, respectively, for colectomy. The presence of extraintestinal manifestations and extended disease location (at least left-sided colitis) were identified as risk factors for step-up in therapy with systemic corticosteroids, IM, TNF antagonists, calcineurin inhibitors, and surgery. Cigarette smoking at diagnosis was protective against surgery. CONCLUSIONS The presence of extraintestinal manifestations, left-sided colitis, and extensive colitis/pancolitis at the time of diagnosis were associated with use of systemic corticosteroids, IM, TNF antagonists, calcineurin inhibitors, and colectomy during the disease course.

Comparison of multiple comparison methods for identifying differential gene expression in simulated and real papillary thyroid cancer microarray data

The difficulty of detecting differential gene expression in microarray data has existed for many years. Several correction procedures try to avoid the family-wise error rate in multiple comparison process, including the Bonferroni and Sidak single-step p-value adjustments, Holm's step-down correction method, and Benjamini and Hochberg's false discovery rate (FDR) correction procedure. Each multiple comparison technique has its advantages and weaknesses. We studied each multiple comparison method through numerical studies (simulations) and applied the methods to the real exploratory DNA microarray data, which detect of molecular signatures in papillary thyroid cancer (PTC) patients. According to our results of simulation studies, Benjamini and Hochberg step-up FDR controlling procedure is the best process among these multiple comparison methods and we discovered 1277 potential biomarkers among 54675 probe sets after applying the Benjamini and Hochberg's method to PTC microarray data.^

Multiphase Design and Control Techniques Applied to a Forward Micro-Inverter

En la última década la potencia instalada de energía solar fotovoltaica ha crecido una media de un 49% anual y se espera que alcance el 16%del consumo energético mundial en el año 2050. La mayor parte de estas instalaciones se corresponden con sistemas conectados a la red eléctrica y un amplio porcentaje de ellas son instalaciones domésticas o en edificios. En el mercado ya existen diferentes arquitecturas para este tipo de instalaciones, entre las que se encuentras los módulos AC. Un módulo AC consiste en un inversor, también conocido como micro-inversor, que se monta en la parte trasera de un panel o módulo fotovoltaico. Esta tecnología ofrece modularidad, redundancia y la extracción de la máxima potencia de cada panel solar de la instalación. Además, la expansión de esta tecnología posibilitará una reducción de costes asociados a las economías de escala y a la posibilidad de que el propio usuario pueda componer su propio sistema. Sin embargo, el micro-inversor debe ser capaz de proporcionar una ganancia de tensión adecuada para conectar el panel solar directamente a la red, mientras mantiene un rendimiento aceptable en un amplio rango de potencias. Asimismo, los estándares de conexión a red deber ser satisfechos y el tamaño y el tiempo de vida del micro-inversor son factores que han de tenerse siempre en cuenta. En esta tesis se propone un micro-inversor derivado de la topología “forward” controlado en el límite entre los modos de conducción continuo y discontinuo (BCM por sus siglas en inglés). El transformador de la topología propuesta mantiene la misma estructura que en el convertidor “forward” clásico y la utilización de interruptores bidireccionales en el secundario permite la conexión directa del inversor a la red. Asimismo el método de control elegido permite obtener factor de potencia cercano a la unidad con una implementación sencilla. En la tesis se presenta el principio de funcionamiento y los principales aspectos del diseño del micro-inversor propuesto. Con la idea de mantener una solución sencilla y de bajo coste, se ha seleccionado un controlador analógico que está originalmente pensado para controlar un corrector del factor de potencia en el mismo modo de conducción que el micro-inversor “forward”. La tesis presenta las principales modificaciones necesarias, con especial atención a la detección del cruce por cero de la corriente (ZCD por sus siglas en inglés) y la compatibilidad del controlador con la inclusión de un algoritmo de búsqueda del punto de máxima potencia (MPPT por sus siglas en inglés). Los resultados experimentales muestran las limitaciones de la implementación elegida e identifican al transformador como el principal contribuyente a las pérdidas del micro-inversor. El principal objetivo de esta tesis es contribuir a la aplicación de técnicas de control y diseño de sistemas multifase en micro-inversores fotovoltaicos. En esta tesis se van a considerar dos configuraciones multifase diferentes aplicadas al micro-inversor “forward” propuesto. La primera consiste en una variación con conexión paralelo-serie que permite la utilización de transformadores con una relación de vueltas baja, y por tanto bien acoplados, para conseguir una ganancia de tensión adecuada con un mejor rendimiento. Esta configuración emplea el mismo control BCM cuando la potencia extraída del panel solar es máxima. Este método de control implica que la frecuencia de conmutación se incrementa considerablemente cuando la potencia decrece, lo que compromete el rendimiento. Por lo tanto y con la intención de mantener unos bueno niveles de rendimiento ponderado, el micro-inversor funciona en modo de conducción discontinuo (DCM, por sus siglas en inglés) cuando la potencia extraía del panel solar es menor que la máxima. La segunda configuración multifase considerada en esta tesis es la aplicación de la técnica de paralelo con entrelazado. Además se han considerado dos técnicas diferentes para decidir el número de fases activas: dependiendo de la potencia continua extraída del panel solar y dependiendo de la potencia instantánea demandada por el micro-inversor. La aplicación de estas técnicas es interesante en los sistemas fotovoltaicos conectados a la red eléctrica por la posibilidad que brindan de obtener un rendimiento prácticamente plano en un amplio rango de potencia. Las configuraciones con entrelazado se controlan en DCM para evitar la necesidad de un control de corriente, lo que es importante cuando el número de fases es alto. Los núcleos adecuados para todas las configuraciones multifase consideradas se seleccionan usando el producto de áreas. Una vez seleccionados los núcleos se ha realizado un diseño detallado de cada uno de los transformadores. Con la información obtenida de los diseños y los resultados de simulación, se puede analizar el impacto que el número de transformadores utilizados tiene en el tamaño y el rendimiento de las distintas configuraciones. Los resultados de este análisis, presentado en esta tesis, se utilizan posteriormente para comparar las distintas configuraciones. Muchas otras topologías se han presentado en la literatura para abordar los diferentes aspectos a considerar en los micro-inversores, que han sido presentados anteriormente. La mayoría de estas topologías utilizan un transformador de alta frecuencia para solventar el salto de tensión y evitar problemas de seguridad y de puesta a tierra. En cualquier caso, es interesante evaluar si topologías sin aislamiento galvánico son aptas para su utilización como micro-inversores. En esta tesis se presenta una revisión de inversores con capacidad de elevar tensión, que se comparan bajo las mismas especificaciones. El objetivo es proporcionar la información necesaria para valorar si estas topologías son aplicables en los módulos AC. Las principales contribuciones de esta tesis son: • La aplicación del control BCM a un convertidor “forward” para obtener un micro-inversor de una etapa sencillo y de bajo coste. • La modificación de dicho micro-inversor con conexión paralelo-series de transformadores que permite reducir la corriente de los semiconductores y una ganancia de tensión adecuada con transformadores altamente acoplados. • La aplicación de técnicas de entrelazado y decisión de apagado de fases en la puesta en paralelo del micro-inversor “forward”. • El análisis y la comparación del efecto en el tamaño y el rendimiento del incremento del número de transformadores en las diferentes configuraciones multifase. • La eliminación de las medidas y los lazos de control de corriente en las topologías multifase con la utilización del modo de conducción discontinuo y un algoritmo MPPT sin necesidad de medida de corriente. • La recopilación y comparación bajo las mismas especificaciones de topologías inversoras con capacidad de elevar tensión, que pueden ser adecuadas para la utilización como micro-inversores. Esta tesis está estructurada en seis capítulos. El capítulo 1 presenta el marco en que se desarrolla la tesis así como el alcance de la misma. En el capítulo 2 se recopilan las topologías existentes de micro-invesores con aislamiento y aquellas sin aislamiento cuya implementación en un módulo AC es factible. Asimismo se presenta la comparación entre estas topologías bajo las mismas especificaciones. El capítulo 3 se centra en el micro-inversor “forward” que se propone originalmente en esta tesis. La aplicación de las técnicas multifase se aborda en los capítulos 4 y 5, en los que se presentan los análisis en función del número de transformadores. El capítulo está orientado a la propuesta paralelo-serie mientras que la configuración con entrelazado se analiza en el capítulo 5. Por último, en el capítulo 6 se presentan las contribuciones de esta tesis y los trabajos futuros. ABSTRACT In the last decade the photovoltaic (PV) installed power increased with an average growth of 49% per year and it is expected to cover the 16% of the global electricity consumption by 2050. Most of the installed PV power corresponds to grid-connected systems, with a significant percentage of residential installations. In these PV systems, the inverter is essential since it is the responsible of transferring into the grid the extracted power from the PV modules. Several architectures have been proposed for grid-connected residential PV systems, including the AC-module technology. An AC-module consists of an inverter, also known as micro-inverter, which is attached to a PV module. The AC-module technology offers modularity, redundancy and individual MPPT of each module. In addition, the expansion of this technology will enable the possibility of economies of scale of mass market and “plug and play” for the user, thus reducing the overall cost of the installation. However, the micro-inverter must be able to provide the required voltage boost to interface a low voltage PV module to the grid while keeping an acceptable efficiency in a wide power range. Furthermore, the quality standards must be satisfied and size and lifetime of the solutions must be always considered. In this thesis a single-stage forward micro-inverter with boundary mode operation is proposed to address the micro-inverter requirements. The transformer in the proposed topology remains as in the classic forward converter and bidirectional switches in the secondary side allows direct connection to the grid. In addition the selected control strategy allows high power factor current with a simple implementation. The operation of the topology is presented and the main design issues are introduced. With the intention to propose a simple and low-cost solution, an analog controller for a PFC operated in boundary mode is utilized. The main necessary modifications are discussed, with the focus on the zero current detection (ZCD) and the compatibility of the controller with a MPPT algorithm. The experimental results show the limitations of the selected analog controller implementation and the transformer is identified as a main losses contributor. The main objective of this thesis is to contribute in the application of control and design multiphase techniques to the PV micro-inverters. Two different multiphase configurations have been applied to the forward micro-inverter proposed in this thesis. The first one consists of a parallel-series connected variation which enables the use of low turns ratio, i.e. well coupled, transformers to achieve a proper voltage boost with an improved performance. This multiphase configuration implements BCM control at maximum load however. With this control method the switching frequency increases significantly for light load operation, thus jeopardizing the efficiency. Therefore, in order to keep acceptable weighted efficiency levels, DCM operation is selected for low power conditions. The second multiphase variation considered in this thesis is the interleaved configuration with two different phase shedding techniques: depending on the DC power extracted from the PV panel, and depending on the demanded instantaneous power. The application of interleaving techniques is interesting in PV grid-connected inverters for the possibility of flat efficiency behavior in a wide power range. The interleaved variations of the proposed forward micro-inverter are operated in DCM to avoid the current loop, which is important when the number of phases is large. The adequate transformer cores for all the multiphase configurations are selected according to the area product parameter and a detailed design of each required transformer is developed. With this information and simulation results, the impact in size and efficiency of the number of transformer used can be assessed. The considered multiphase topologies are compared in this thesis according to the results of the introduced analysis. Several other topological solutions have been proposed to solve the mentioned concerns in AC-module application. The most of these solutions use a high frequency transformer to boost the voltage and avoid grounding and safety issues. However, it is of interest to assess if the non-isolated topologies are suitable for AC-module application. In this thesis a review of transformerless step-up inverters is presented. The compiled topologies are compared using a set benchmark to provide the necessary information to assess whether non-isolated topologies are suitable for AC-module application. The main contributions of this thesis are: • The application of the boundary mode control with constant off-time to a forward converter, to obtain a simple and low-cost single-stage forward micro-inverter. • A modification of the forward micro-inverter with primary-parallel secondary-series connected transformers to reduce the current stress and improve the voltage gain with highly coupled transformers. •The application of the interleaved configuration with different phase shedding strategies to the proposed forward micro-inverter. • An analysis and comparison of the influence in size and efficiency of increasing the number of transformers in the parallel-series and interleaved multiphase configurations. • Elimination of the current loop and current measurements in the multiphase topologies by adopting DCM operation and a current sensorless MPPT. • A compilation and comparison with the same specifications of suitable non-isolated step-up inverters. This thesis is organized in six chapters. In Chapter 1 the background of single-phase PV-connected systems is discussed and the scope of the thesis is defined. Chapter 2 compiles the existing solutions for isolated micro-inverters and transformerless step-up inverters suitable for AC-module application. In addition, the most convenient non-isolated inverters are compared using a defined benchmark. Chapter 3 focuses on the originally proposed single-stage forward micro-inverter. The application of multiphase techniques is addressed in Chapter 4 and Chapter 5, and the impact in different parameters of increasing the number of phases is analyzed. In Chapter 4 an original primary-parallel secondary-series variation of the forward micro-inverter is presented, while Chapter 5 focuses on the application of the interleaved configuration. Finally, Chapter 6 discusses the contributions of the thesis and the future work.

Tunisia in turmoil: how should the EU react? CEPS Commentary, 4 March 2013

The assassination of the opposition leader in Tunisia exposed the underlying divisions between members of the ruling classes, between those in and outside of government, between religious groupings and secularists, and between the coastal areas and the hinterland of Tunisia. Since the revolution, tackling social inclusion has become a pressing problem: men versus women, young versus old, opponents versus supporters of the old regime and political forces inside Tunisia versus those in exile. The National Constituent Assembly (NCA)’s inability to address these fault lines and approve the second draft of the constitution has hampered the transition of the country towards the next elections, while all of the above have undermined trust in the political process. Although Tunisians are primarily responsible for the political processes in their country, argue authors Hrant Kostanyan and Elitsa Garnizova, the EU should step up its efforts to deliver on its commitments in the areas of money, market and mobility.