Shock-Induced Near-Wall Two-Phase Flow Structure Over a Micron-Sized Particles Bed

The present paper studies numerical modelling of near-wall two-phase flows induced by a normal shock wave moving at a constant speed, over a micronsized particles bed. In this two-fluid model, the possibility of particle trajectory intersection is considered and a full Lagrangian formulation of the dispersed phase is introduced. The finiteness of the Reynolds and Mach numbers of the flow around a particle as well as the fineness of the particle sizes are taken into account in describing the interactions between the carrier- and dispersed- phases. For the small mass-loading ratio case, the numerical simulation of flow structure of the two phases is implemented and the profiles of the particle number density are obtained under the constant-flux condition on the wall. The effects of the shock Mach number and the particle size and material density on particle entrainment motion are discussed in detail.The obtained results indicate that interphase non-equilibrium in the velocity and temperature is a common feature for this type of flows and a local particle accumulation zone may form near the envelope of the particle trajectory family.

Simplified Navier-Stokes equations (SNSE)

Ten kinds of the simplified Navier-Stokes equations (SNSE) are reviewed and also used to calculate the Jeffery-Hamel flow as well as to analyze briefly the seven kinds of flows to which the exact solutions of the complete Navier-Stokes equations (CNSE) have been found. Analysis shows that the actual differences among the solutions of the different SNSE can go beyond the range of the order of magnitude of Re-1/2 and result even in different flow patterns, therefore, how to choose the viscous terms included in the SNSE is worthy of notice where Re=S∞u∞ L/μ∞ is the Reynolds numbers. For the aforesaid eight kinds of flows, the solutions to the inner-outer-layer-matched SNSE and to the thin-layer-2-order SNSE agree completely with the exact solutions to CNSE. But the solutions to all the other SNSE are not completely consistent with the exact solutions to CNSE and not a few of them are actually the solutions of the classical boundary layer theory. The innerouter-layer-matched SNSE contains the shear stress causing angular displacement of the inormal axis with respect to the streamwise axis and the normal stress causing expansion-contraction in the direction of the normal axis and the viscous terms being of the order of magnitude of the normal stress; and it can also reasonably treat the inertial terms as well as the relation between the viscous and inertial terms. Therefore, it seems promising in respects of both mechanics and mathematics.

Estudio del comportamiento aerodinámico de un alerón trasero de un monoplaza tipo Formula Student

[ES]El proyecto investigador tiene el objeto el estudio del comportamiento de un perfil aerodinámico frente a un flujo turbulento, en este caso el aire. Se trata de evaluar las presiones que se ejercen sobre dicho perfil, que será un alerón de monoplaza tipo Formula Student, para comprobar si aporta alguna mejora en el comportamiento del monoplaza la introducción de este paquete aerodinámico. Con la introducción de este perfil en el monoplaza se pretende ganar un mayor agarre en el paso por curva siendo la resistencia al avance en recta la mínima posible, ya que lo que se pretende es hacer el recorrido del circuito en el menor tiempo posible. Por tanto hay dos variables a tener en cuenta a la hora de diseñar el alerón, por un lado esta mejorar el agarre de los neumáticos sobre el asfalto al tomar una curva, lo que nos permitirá tomar la curva a mayor velocidad y por tanto en menos tiempo, y por otro lado, la oposición que el alerón ejerce en el avance en recta disminuyendo su velocidad máxima. En resumen, se trata de comparar la fuerza horizontal y la fuerza vertical que el aire ejerce sobre el perfil aerodinámico a introducir en el monoplaza y evaluar si es beneficioso para este, es decir, si añadiendo dicho perfil se realiza el trazado del circuito en menor tiempo que sin él. Para ello se realizarán simulaciones con un software de modelado físico de flujos y turbulencias sobre un diseño de un alerón dado, con diferentes tipos de flujo, de forma que se asemeje de mejor forma a las condiciones de la pista y se obtendrán los resultados de las presiones que el flujo de aire ejerce sobre las superficies del perfil. Después se obtendrán las fuerzas puntuales vertical y horizontal y se analizaran los datos obtenidos. Deberán tenerse en cuenta, además de los resultados obtenidos, los materiales a emplear a la hora de su fabricación, el proceso de dicha fabricación y el coste que supone tanto el proceso como los materiales empleados.

Grandes túneis urbanos: uma proposta de gestão ambiental.

Este estudo objetiva a sistematização do conhecimento, através de uma abordagem multidisciplinar, de forma a conformar uma proposta inicial de protocolo de gestão ocupacional e ambiental em grandes túneis urbanos em âmbito nacional. Há na presente pesquisa uma atenção particular aos túneis urbanos dedicados ao tráfego de veículos automotores, devido às suas características físico-espaciais que os tornam especialmente perigosos e tóxicos aos seus usuários e aos funcionários envolvidos. A relativa carência de material bibliográfico de caráter sistêmico e específico no Brasil enseja à busca por referências em documentos desenvolvidos em outros países. Ainda que em nível preliminar, a compilação crítica de dados, normas e referências pesquisadas, à luz do contexto e dos instrumentos normativos brasileiros referentes ao tema, traduz-se no aspecto original desta proposta dissertativa, a ser possivelmente utilizada como ponto de partida para estudos mais extensos. São abordadas as seguintes disciplinas relativas ao objeto de pesquisa: a) Características físico-espaciais; b) Formas de uso; c) Sistema de ventilação e exaustão; d) Sistema de iluminação; e) Sistema de segurança contra sinistros e incêndio; f) Sistema de fiscalização e orientação de tráfego, comunicação e sinalização; g) Sistema de drenagem; h) Sistema de gerenciamento de resíduos sólidos. O túnel Rebouças (1962-1965) e o túnel Engenheiro Raymundo de Paula Soares (Linha Amarela) (1997), distanciados por mais de três décadas, foram escolhidos como estudos de caso, não tão somente devido aos seus portes, fluxos intensos de veículos etc., mas também devido aos contextos das evoluções normativas em que se inserem.

River Wharfe fisheries monitoring report - summer 2001

This is a report on monitoring carried out in 2001 specifically in relation to effects of flows and abstractions on fisheries in the River Wharfe. The monitoring is a continuation of that started in relation to the Time Limited Abstraction Licences in 1996 and required by the new licences granted in 1999. It gives information regarding fish populations at a range of sites in the River Wharfe and also two tributary sites. It also gives recommendations for future investigations in relation to both Time Limited Licences and general broader issues.

O impacto da adoção das normas contábeis internacionais no ensino superior de Contabilidade, segundo a percepção dos docentes

A globalização econômica tem provocado transformações na base produtiva da economia mundial, estimulando a aceleração do processo de internacionalização de empresas. Esse processo estimula variados processos de convergência e interdependência. Também na área contábil, a internacionalização dos fluxos comerciais financeiros e tecnológicos expande a oportunidade de investimentos estrangeiros, o que, por sua vez gera a demanda por uma linguagem mais universal para as demonstrações financeiras. Nesse contexto, a educação superior em Contabilidade parece desempenhar papel fundamental para a construção de novas competências e de uma nova cultura que contribua para operacionalizar a convergência internacional de procedimentos contábeis. O presente trabalho pretendeu, assim, avaliar por meio da percepção dos operadores do ensino superior em Contábeis, o nível de adequação dos cursos de graduação diante das novas competências demandadas por um mercado de trabalho em processo de internacionalização. Para tanto, foi realizada uma revisão da literatura sobre globalização e internacionalização, convergência e harmonização, mecanismos de disseminação de normas internacionais, e ainda sobre demandas por competências específicas para a nova realidade de normas internacionais. Também foi aplicado questionário junto a professores e gestores de 10 cursos de graduação em Contábeis do município do Rio de Janeiro, procurando sistematizar a percepção sobre a formação e desenvolvimento de competências relacionadas a um mercado orientado por normas internacionais. Os resultados principais apontam para uma situação onde, apesar de avaliada como positiva e irreversível, e apesar dos professores se considerarem bem preparados para tratar o tema, a problemática das normas internacionais não é incorporada no cotidiano dos cursos de graduação.

Processo de acompanhamento de paciente portadores de feridas na atenção básica

Esta pesquisa tem como objeto de estudo a análise do processo de acompanhamento dos clientes portadores de feridas na atenção primária do município de Angra dos Reis. Os objetivos são: verificar a existência de processo de acompanhamento de clientes portadores de feridas nas unidades de atenção primária do município de Angra dos Reis; analisar as dificuldades inerentes ao processo de acompanhamento de clientes portadores de feridas nas unidades de atenção primária do município de Angra dos Reis. O método foi descritivo, o tipo é de levantamento e de natureza quantitativa. O instrumento de coleta de dados foi o formulário, tendo como sujeitos do estudo a população de enfermeiros atuantes na atenção primária do município de Angra dos Reis e que assinaram o Termo de Consentimento Livre e Esclarecido, conforme disposto na Resolução 196/96 do Conselho Nacional de saúde. O cenário utilizado foi o município de Angra dos Reis. A pesquisa foi aprovada pelo Comitê de Ética em Pesquisa do Instituto de Medicina Social da UERJ, através da Plataforma Brasil em 28/06/2013. A análise demonstrou que mais de 93% dos enfermeiros realizam curativos durante sua atuação profissional na atenção primária, destes, 80% realizam algum tipo de acompanhamento de clientes portadores de feridas. Este acompanhamento nem sempre é contínuo, por contada dificuldade técnica do próprio profissional, da interrupção do fornecimento de materiais por parte do almoxarifado, da baixa adesão do cliente e da inexistência de uma rotina institucionalizada. A insuficiência de produtos disponíveis no município para a realização de curativos também foi um fator descrito pelos sujeitos como prejudicador no processo de acompanhamento destes pacientes. Foi verificado que a utilização de produtos de segunda geração para realização de curativos, quando indicados de forma correta e respeitando o prazo de troca, proporciona uma economia nos fastos do município no que se refere ao tratamento tópico de feridas, economia esta que pode chegar à metade dos gastos. Este estudo foi relevante para a otimização do processo de acompanhamento de clientes portadores de feridas no município, bem como reorganização defluxos, rotinas e do cuidado prestado.

Abordagens do tipo livre de jacobiana na simulação do escoamento de fluidos compressíveis em meios porosos

O desenvolvimento de software livre de Jacobiana para a resolução de problemas formulados por equações diferenciais parciais não-lineares é de interesse crescente para simular processos práticos de engenharia. Este trabalho utiliza o chamado algoritmo espectral livre de derivada para equações não-lineares na simulação de fluxos em meios porosos. O modelo aqui considerado é aquele empregado para descrever o deslocamento do fluido compressível miscível em meios porosos com fontes e sumidouros, onde a densidade da mistura de fluidos varia exponencialmente com a pressão. O algoritmo espectral utilizado é um método moderno para a solução de sistemas não-lineares de grande porte, o que não resolve sistemas lineares, nem usa qualquer informação explícita associados com a matriz Jacobiana, sendo uma abordagem livre de Jacobiana. Problemas bidimensionais são apresentados, juntamente com os resultados numéricos comparando o algoritmo espectral com um método de Newton inexato livre de Jacobiana. Os resultados deste trabalho mostram que este algoritmo espectral moderno é um método confiável e eficiente para a simulação de escoamentos compressíveis em meios porosos.

River Leith fluvial aufit. Final project report

This is the River Leith fluvial audit: Final project report produced by Lancaster University in 1998. Freeze cores extracted from the upper and lower ends of River Leith illustrate that the bed is highly compacted in the downstream reach. Fine material is locally derived from bedrock at depths of only 32 cms into the bed and in one core fine material is 66% of the extracted core. Levels of fines that are believed to be detrimental to fish are put at 20 to 30%. Reduced flow and stream power from water abstraction may lead to a greater infiltration of fine material if gravels are not regularly flushed through with flood flows. Infiltration of fine material can lead to river bed compaction and concretion. A small abstraction may have no effect on the morphology of a river if the reduced discharge is within the normal range of flows experienced. However if the impact on flows is small it is still possible that fine sediment problems will develop progressively and the effects may not be noticed for several years.

Large Eddy Simulation for Turbines: Methodologies, Cost and Future Outlooks

Flows throughout different zones of turbines have been investigated using large eddy simulation (LES) and hybrid Reynolds-averaged Navier–Stokes-LES (RANS-LES) methods and contrasted with RANS modeling, which is more typically used in the design environment. The studied cases include low and high-pressure turbine cascades, real surface roughness effects, internal cooling ducts, trailing edge cut-backs, and labyrinth and rim seals. Evidence is presented that shows that LES and hybrid RANS-LES produces higher quality data than RANS/URANS for a wide range of flows. The higher level of physics that is resolved allows for greater flow physics insight, which is valuable for improving designs and refining lower order models. Turbine zones are categorized by flow type to assist in choosing the appropriate eddy resolving method and to estimate the computational cost.

Global modes with multiple saddle points

Significant progress has been made towards understanding the global stability of slowly-developing shear flows. The WKBJ theory developed by Patrick Huerre and his co-authors has proved absolutely central, with the result that both the linear and the nonlinear stability of a wide range of flows can now be understood in terms of their local absolute/convective instability properties. In many situations, the local absolute frequency possesses a single dominant saddle point in complex X-space (where X is the slow streamwise coordinate of the base flow), which then acts as a single wavemaker driving the entire global linear dynamics. In this paper we consider the more complicated case in which multiple saddles may act as the wavemaker for different values of some control parameter. We derive a frequency selection criterion in the general case, which is then validated against numerical results for the linearized third-order Ginzburg-Landau equation (which possesses two saddle points). We believe that this theory may be relevant to a number of flows, including the boundary layer on a rotating disk and the eccentric Taylor-Couette-Poiseuille flow. © 2014 Elsevier Masson SAS. All rights reserved.

机器人插件作业的视觉导引方法研究

插件作业 (parts mating)是装配机器人的一项基本作业环节 .本文介绍了以双目立体视觉实现该作业的视觉导引方法 .该方法通过采用人机交互方式 ,借助于人的智慧 ,提高了图像特征提取和匹配的准确性和可靠性、可直观准确地给出插件作业的动作参数 ,克服了自动视觉计算复杂、鲁棒性差的缺点 ,适用于机器人遥操作作业 .实验表明 ,基于人机交互的机器人插件作业在立体视觉导引下是完全可行的

改造型盆地油气成藏机理与油气预测－以银根－额济纳旗盆地为例

Reformed basin is a basin that underwent multiple immense reformation after the sedimentary stage, the major geologic elements of the petroleum system in the prototyped basin are destroyed to a certain extent, and their petroleum system has been reconstructed. This type of basin is frequently found in the course of exploration both home and abroad. In China, especially in the western and southern part of China, the basins in which oil explorations have been conducted are mostly reformed basins. The reformed basins from Paleozoic, Late Mesozoic to Cenozoic are widely distributed in West and South China. They are, and moreover, will be a challenge for oil and gas exploration. The conventional investigation and exploration techniques used in the slightly reconstructed basin just don't work well when facing the reformed basin. Therefore, the study on the reformed basin, especially the study on the pool-forming mechanism and reservoir prediction becomes a focus and one of difficulties for the geologists overseas and domestic. Yingen-Ejinaqi Basin is a typical case of the Late Mesozoic and Cenozoic reformed basins in China. It locates in West China and is a exploration frontier with difficulties and no break through is made for years. A comprehensive research on it will be of significance for oil and gas exploration in similar basins of China. The late research for reformed basin in China now is mainly concentrated on basin classification, formation mechanism, geologic features, and survey technique, distribution regularity of oil accumulation and its dominating factors, assessment of oil exploration prospect and target zones, etc. On the other hand, the study on the pool-forming mechanism and reservoir prediction seems insufficient in systematization, and the research is deficient in methodology and combination of qualitative and quantitative studies, as well as the application of the new theory and techniques. The current efforts are mainly directed to structures (faults), sedimentation, the relationship between reservoir evolution and oil accumulation, and some other relevant fields. However, the application of the new theory and techniques seems to be insufficient such as petroleum system, pool-forming dynamics, fluid pressure compartment, and basin simulation, etc. So is the dynamic and integrated research. As a result, incomplete knowledge and understandings derived from the research on pool-forming mechanism and reservoir prediction often do not accord with rea-lity of the basin. The study and exploration under the guidance of this knowledge will inevitably lead to errors and failure. This paper, based on the previous study of the other geologists on reformed basins, with emphasis on "wholeness or systematic, dynamic and integrated" research, presents a reverse thinking of beginning from conserved units in the basin and the combination of qualitative and quantitative study with new theory and technique by building a geological model. The paper also puts forward a new thought for studying the oil & gas accumulation and reservoir prediction , and establishes a new research system for reformed basin. It is verified by the known reservoir and oil accumulation area in the basin and has a practical value for use and reference. The new ideas and achievements in this research are as following: 1.This is the first time that the system for studying the reformed basin and its pool-forming mechanism and reservoir prediction is presented. A reverse thinking and combination of qualitative & quantitative are applied here with emphasis on "wholeness or systematic, dynamic and integrated" research, new theory, techniques & methods comprehensive use and geologic models building. 2. Identifying criterion and methods, classifying schemes, and denominating principles for the conserved units of reformed basins are presented in this paper. The geologic model of conserved units of Yingen-Ejinaqi Basin has been built. It is a practical method when combined with the traditional way for basin survey and the conserved units study. 3.The dynamic sources of basin deformation are believed to be stress, gravity and thermodynamics. The stress and gravity are key factors in basin deformation and pool forming, especially stress. Scientific proof is provided by classifying the functional type, style and range of the stress, gravity and thermodynamics. 4.The pool forming and reservoir distribution of Yingen-Ejinaqi Basin are controlled by multiple factors or geologic conditions or/and co-controlled by both of them. The qualitative and quantitative research on petroleum system and basin modeling will help us understand and determine the pool-forming period of the conserved unit (timing), the oil migrating direction (orientation), the oil accumulating region (location), the oil distributing border (bordering) and the size of oil accumulation (quantification). Thus the pool-forming and distribution zones can be predicted. 5.Three generating modes (reform-succession type, reform-destroyed type and reform-regenerating type or reform-newborn type) of pool forming for reformed basins are presented here, together with the inner relationships between basin deformation type, overlapping style and pool-forming modes. The pool-forming modes are determined by deformation type and overlapping style. Reservoir distribution will be predicted based on the modes and other concrete pool-forming conditions. 6.The evaluation methods of the conserved units and zones and the parameter selection are reliable in optimal selecting of target zones. The technical terms, new ideas and methods for the study of reformed basins, the pool-forming mechanism and reservoir prediction are presented in this paper. The concepts and terms, the identifying criterion, the denominating principles, the generating modes for pool forming, the methods of reservoir prediction, and the evaluation techniques for conserved units and zones can be used for reference in studies on the petroleum exploration of reformed basins in China and abroad. It serves as a typical example for further research of the reformed basins and the geologic regulations of oil accumulation. It has a practical value of use and reference. The future research in the field of pool-forming mechanism of the reformed basins may well be on the process simulation of pool-forming dynamics of the reformed basins. Experimental work has been conducted to simulate the processes by using quantitative and qualitative methods combined. The further study in this field calls for more efforts.

Efficiently and Fairly Allocating Bandwidth at a Highly Congested Link

We consider the problem of efficiently and fairly allocating bandwidth at a highly congested link to a diverse set of flows, including TCP flows with various Round Trip Times (RTT), non-TCP-friendly flows such as Constant-Bit-Rate (CBR) applications using UDP, misbehaving, or malicious flows. Though simple, a FIFO queue management is vulnerable. Fair Queueing (FQ) can guarantee max-min fairness but fails at efficiency. RED-PD exploits the history of RED's actions in preferentially dropping packets from higher-rate flows. Thus, RED-PD attempts to achieve fairness at low cost. By relying on RED's actions, RED-PD turns out not to be effective in dealing with non-adaptive flows in settings with a highly heterogeneous mix of flows. In this paper, we propose a new approach we call RED-NB (RED with No Bias). RED-NB does not rely on RED's actions. Rather it explicitly maintains its own history for the few high-rate flows. RED-NB then adaptively adjusts flow dropping probabilities to achieve max-min fairness. In addition, RED-NB helps RED itself at very high loads by tuning RED's dropping behavior to the flow characteristics (restricted in this paper to RTTs) to eliminate its bias against long-RTT TCP flows while still taking advantage of RED's features at low loads. Through extensive simulations, we confirm the fairness of RED-NB and show that it outperforms RED, RED-PD, and CHOKe in all scenarios.

Sequentially assembled food webs and extremum principles in ecosystem ecology

Successional changes during sequential assembly of food webs were examined. This was carried out by numerical methods, drawing one species at a time from a species pool and obtaining the permanent (persistent) community emerging at each step. Interactions among species were based on some simple rules about body sizes of consumers and their prey, and community dynamics were described in terms of flows of biomass density.