Mechanical resistance of the modified stabilization method for the tibial tuberosity advancement technique: ex vivo experimental study in dogs

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência do preparo inicial sobre a estrutura do solo quando da adoção do sistema plantio direto, avaliada por meio da pressão de preconsolidação

Os efeitos do tráfego e do tipo de preparo sobre a estrutura dos solos agrícolas, quando da adoção do sistema plantio direto na região dos Cerrados, têm sido pouco pesquisados. Os estudos desenvolvidos são apenas qualitativos e utilizam-se, geralmente, de propriedades, tais como: a densidade do solo e a resistência do solo à penetração, as quais não possibilitam predizer quanto de pressão o solo pode receber de forma que, em manejos futuros, a compactação possa ser evitada. Este trabalho teve como objetivo avaliar a influência do preparo inicial do solo quando da adoção do sistema plantio direto sobre a estrutura de um Latossolo Vermelho distrófico por meio da pressão de preconsolidação (sigmap). Os valores de sigmap foram obtidos a partir da elaboração de modelos de compressibilidade, os quais consideraram a influência dos seguintes fatores: (1) preparo inicial do solo: arado de aivecas (AA), arado de discos (AD), grade aradora (GA) e vibrosubsolador (VS); (2) manejo: sistema plantio convencional (PC), o qual foi utilizado como testemunha para avaliar a influência dos preparos e (3) profundidade: superficial (SP - 0,00 a 0,05 m) e profundidade média de trabalho dos implementos (PMT- 0,24 a 0,27 m). Os resultados evidenciaram que a sigmap mostrou-se eficiente na avaliação da influência do preparo inicial sobre a estrutura do solo quando da instalação do sistema plantio direto no Latossolo Vermelho distrófico, tendo o seu valor variado entre preparos e profundidades estudados. A sigmap evidenciou maior resistência mecânica e, portanto, maior consolidação da estrutura do solo na profundidade SP dos tratamentos da área sob plantio direto. Verificou-se, também, que os preparos iniciais avaliados reduziram a resistência mecânica do solo na profundidade PMT, quando comparados à do sistema plantio convencional. Todavia, são o vibrosubsolador e o arado de discos os implementos recomendados para alívio dessa resistência, isto é, para a melhoria da estrutura do solo nas profundidades SP e PMT, respectivamente, quando da adoção do sistema plantio direto.

Atributos físicos de um Neossolo Quartzarênico e um Latossolo Vermelho sob diferentes sistemas de manejo

O objetivo deste estudo foi avaliar o efeito de diferentes sistemas de manejo, nos atributos físicos de um Neossolo Quartzarênico e de um Latossolo Vermelho. Foram avaliados a densidade do solo, o volume total de poros e a resistência mecânica à penetração. Todos os sistemas de manejo e uso do solo promoveram aumento na densidade, diminuição do volume total de poros e variação da resistência do solo à penetração. No Neossolo Quartzarênico houve diminuição da macroporosidade.

Inheritance of resistance to powdery mildew in pea and pathogenesis-related aspects

A herança da resistência ao oídio na cultivar de ervilha MK-10 e alguns aspectos histológicos da infecção foram estudados. Para o estudo da herança, as gerações F1, F2, retrocuzamentos e geração F3 de MK-10 com duas populações suscetíveis foram avaliadas. Nas avaliações histológicas observou-se a porcentagem de conídios germinados, porcentagem de conídios que formaram apressório, porcentagem de conídios que estabeleceram colônia e número de haustórios por colônia. Para comparar as razões de segregação obtidas no estudo da herança da resistência, adotou-se o teste do Qui-quadrado (X²) e para os dados das análises histológicas, utilizou-se o teste Tukey a 5% de probabilidade. Concluiu-se que a resistência de MK-10 ao oídio é devida a um par de alelos recessivos e que a resistência é expressa na fase de pré-penetração, completada por uma morte celular localizada pós-penetração, característica da presença do par de alelos recessivos er1er1.

A novel technique to produce polygenic resistance to anthracnose in Stylosanthes capitata

An improved cultivar, based on 17 genotypes of S. capitata and six of S.macrocephala, was developed at the wEmbrapa Beef Cattle Research Center, Campo Grande, Brazil. The aim was to create durable, race non-specific resistance to anthracnose controlled by polygenic factors. A mass hybridisation technique was employed to produce a high degree of genetic diversity and sizeable quantities of seed of hybrid-derived progenies of Brazilian and Venezuelan genotypes of S. capitata. Outcrossing resulted in a significant improvement in the forage production of progeny of Venezuelan accessions. The multicross was evaluated in multilocational trials, each representing a large tract of country in the Cerrados ecosystem along a north-south transect from lat.6degrees S to 20degrees S. The genetic shift that occurred in S. capitata was a key element in the formation of the new cultivar. It is a complex mixture of two species, and a recombination of much desired forage traits of Brazilian x Venezuelan genotypes, high forage and seed yields coupled with anthracnose resistance. The new cultivar with its diverse genetic make-up has a wide application in the acid-soil savannas of tropical America. It was released by Embrapa for the Cerrados in 2000.

Comparative Study of the Mechanical Resistance of 2 Separate Plates and 2 Overlaid Plates Used in the Fixation of the Mandibular Condyle: An In Vitro Study

Purpose: The objective of this study was to carry out a comparative evaluation of the mechanical resistance of 2 rigid internal fixation techniques for fractures of the mandibular condyle using miniplates.Materials and Methods: Fort), polyurethane resin replicas of human hemimandibles were used. The hemimandibles were sectioned to simulate a high subcondylar fracture and then stabilized with 2 fixing techniques using 2.0-mm system plates and screws. The fixation techniques were 2 separate 4-hole plates with 8 screws, and 2 overlaid 4-hole plates with 4 screws. Each system was submitted to load tests, with the application of the load in mediolateral and anteroposterior directions in an Instron 4411 universal assay machine (Instron, Norwood, MA).Results: Load values and peak displacement were measured. Means and standard deviations were evaluated by analysis of variance (P < .05) and Tukey tests, in which it was verified that the anteroposterior peak load value was affected by the arrangement of the plates on the models, although no differences were observed between the groups for the mediolateral peak load. The arrangement of the plates did not have any influence on peak displacement. Similarly, the final value of the mediolateral load was not affected by the arrangement of the plates on the model.Conclusion: The experimental model with 2 separate plates was statistically superior to the model with 2 overlaid plates only in relation to anteroposterior peak load. Despite showing superiority in mediolateral peak load and peak displacement, there was no statistical difference between the groups for these parameters. (C) 2009 American Association of Oral and Maxillofacial Surgeons

An alternative field method for screening soybean genotypes for resistance to Heterodera glycines

The soybean cyst nematode (Heterodera glycines) has become an increasingly severe problem in soybean production areas in Brazil. The development and use of resistant cultivars is the most efficient method of minimizing losses due to this pathogen. Our objective was to test the efficiency of an alternative method for screening soybean genotypes for resistance to H. glycines in field plots. The alternative method was compared to the standard method of sowing the test genotypes in fields found to be infested during the previous crop season. In the alternative method, the test genotypes are sown in the furrow following the uprooting of 45-day-old infected plants. The alternative method resulted in twice the cyst population and fewer escapes, and more consistent results than the standard method. The major advantage of the alternative method is that it permits screening in a more homogeneous distribution of H. glycines in the soil.

Resistance to maxillary premolar fractures after restoration of class II preparations with resin composite or ceromer.

OBJECTIVE: The aim of this study was to evaluate the resistance to fracture of intact and restored human maxillary premolars. METHOD AND MATERIALS: Thirty noncarious human maxillary premolars, divided into three groups of 10, were submitted to mechanical tests to evaluate their resistance to fracture. Group 1 consisted of intact teeth. Teeth in group 2 received mesio-occlusodistal cavity preparations and were restored with direct resin composite restorations. Teeth in group 3 received mesio-occlusodistal cavity preparations and were restored with ceromer inlays placed with the indirect technique. After restoration, teeth were stored at 37 degrees C for 24 hours and then thermocycled for 500 cycles at temperatures of 5 degrees C and 55 degrees C. RESULTS: Statistical analysis revealed that group 3 (178.765 kgf) had a significantly greater maximum rupture load than did group 1 (120.040 kgf). There was no statistically significant difference between groups 1 and 2 or between groups 2 and 3. CONCLUSION: Class II cavity preparations restored with indirect ceromer inlays offered greater resistance to fracture than did intact teeth. The fracture resistance of teeth restored with resin composite was not significantly different from that of either the ceromer or intact teeth.

Diagnóstico de uma área compactada por atividade minerária, na floresta amazônica, empregando métodos geoestatísticos à variável resistência mecânica à penetração do solo

A quite common problem in the recovery of degraded areas in the mineral exploration understands the compaction of the soil due to the intense traffic of machines and earth movement. The most common problem of the compaction of a degraded surface is: increase of the mechanical resistance to the penetration of the rooats, reduction of the aeration, alteration of the water flow and heat. Thus the present work had the basic objective of diagnosing the compaction of a degraded area by mining in a space way, through the mechanical resistance the way penetration to guide a future subsoiling in the place seeking recovery. Through the studies it was concluded that the kriging method in agreement with the space variation allows the division of the area studies in sub areas facilitating a future work to reduce cost and unnecessary interference to the atmosphere. The method was shown quite appropriate and it can be used in diagnosis of the compaction in a degraded area by mining, foreseeing subsoiling need.

Produtividade e perdas de amendoim em cinco diferentes datas de arranquio

The harvest is a critical time in the production of the peanut (Arachis hypogaea L.), however in this operation losses are inevitable, in some cases o f up to 30% of production. Peanuts are grown for a short period during the reform of the sugarcane fields, providing better usage of the agricultural spaces in Jaboticabal, São Paulo. The objective of this research was to see how early the peanuts could be dug up once they are seen to have matured. The peanuts were dug up at 120, 125, 130, 135 and 140 days after sowing. Results were subjected to variance analysis by the F-test, and when there was significance of the averages, the Tukey test at 5% probability was applied, using a box plot for the following variables: maturation, moisture content of pods and soil, mechanical resistance of soil to penetration, harvest loss and productivity. The box plot proved efficient in the univariate evaluation of the analyzed variables, creating excellent conditions for viewing their behavior. Digging up the peanuts at 120 DAS is recommended.

Adubação de pré-semeadura na cultura do milho em diferentes espaçamentos entrelinhas e manejos do solo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Viabilidade da nabiça (Raphanus raphanistrum L.) como planta de cobertura para a cultura do milho em diferentes sistemas de manejo do solo

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Sustentabilidade estrutural de um solo na região do alto Paranapanema/SP, submetido a dois sistemas de cultivo

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Avaliação do intervalo hídrico ótimo em latossolo vermelho cultivado com milho

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Correlações de Pearson e geoestatísticas entre a produtividade de cana-de-açúcar, estabelecida em dois métodos de colheita, e atributos físico-químicos do solo

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)