Microbiota contaminante em bebidas lácteas fermentadas comerciais

Lately, the acceptability of fermented dairy beverages has been increased, due to the nutritional benefits, the practical consumption and the low cost of product for the manufacturers, and consequently for final market price to the consumers. During the manufacturing process, these products can be susceptible to microbiological contamination. The present study investigated the contaminant microbiota in fermented dairy beverages produced by small- and medium-sized companies, by means of analyses on moulds and yeasts counting, determination of the Most Probable Number (MPN) of total and thermo tolerant coliforms, Escherichia coli and Salmonella spp. detection, and determination of pH value. In spite of the absence of Salmonella spp., a high counts of yeasts and moulds were found, and E. coli was detected in five samples (16.67 %); and the sample were classified as “products in poor sanitary conditions”, because they showed thermo-tolerant coliforms counting higher than the standard established by the legislation in force. Therefore, quality programs such as Good Manufacturing Practices (GMP) and Hazard Analysis and Critical Control Points (HACCP) should be employed to prevent any contamination risk, in order to provide safe products to consumers.

Small hospitals matter: insights from the emergence and spread of vancomycin-resistant enterococci in 2 public hospitals in inner Brazil

Although vancomycin-resistant enterococci (VRE) are reported in Brazil since 1996, data on their impact over settings of different complexity are scarce. We performed a study aimed at identifying determinants ofVRE emergence and spread in a public hospital consortium (comprising 2 hospitals, with 318 and 57 beds) in inner Brazil. Molecular typing and case-control studies (addressing predictors of acquisition or clonality) were performed. Among 122 authocthonous isolates, 106 were Enterococcus faecium (22 clones), and 16, Enterococcus faecalis (5 clones). Incidence was greater in the small-sized hospital, and a previous admission to this hospital was associated with greater risk of VRE colonization or infection during admission to the larger one. Overall risk factors included comorbidities, procedures, and antimicrobials (piperacillin-tazobactam, cefepime, and imipenem). Risk factors varied among different hospitals, species, and clones. Our findings demonstrate that VRE can spread within low-complexity facilities and from these to larger hospitals. (C) 2015 Elsevier Inc. All rights reserved.

Modeling architecture and reference models for the ERF5 project

The adoption of ERPs systems by small and middle-sized companies may not be possible due to their cost. At the same time, when adapting ERP to the company's particular needs, the user keeps depending on the system's sellers due to the lack of access and knowledge of the respective code. Free and open-source software may promote advantages to the enterprises, however, for its adoption it is necessary the development of techniques and tools in order to facilitate its deployment and code maintenance. This article emphasizes the importance of defining modeling architectures and reference models for the development and maintenance of open-source ERPs, in special the ERP5 project.

Small colony variant of methicillin-resistant Staphylococcus pseudintermedius ST71 presenting as a sticky phenotype

We first observed the phenomenon of small colony variants (SCVs) in a Staphylococcus pseudintermedius sequence type 71 (ST71) strain, isolated from a non-pet owner. Although we found that small-sized colonies share main features with Staphylococcus aureus SCVs, they nevertheless show a novel, particular, and sticky phenotype, whose expression was extremely stable, even after subcultivation.

Co-creación de semiconductores

El mercado de los semiconductores está saturado de productos similares y de distribuidores con una propuesta de servicios similar. Los procesos de Co-Creación en los que el cliente colabora en la definición y desarrollo del producto y proporciona información sobre su utilidad, prestaciones y valor percibido, con el resultado de un producto que soluciona sus necesidades reales, se están convirtiendo en un paso adelante en la diferenciación y expansión de la cadena de valor. El proceso de diseño y fabricación de semiconductores es bastante complejo, requiere inversiones cada vez mayores y demanda soluciones completas. Se requiere un ecosistema que soporte el desarrollo de los equipos electrónicos basados en dichos semiconductores. La facilidad para el diálogo y compartir información que proporciona internet, las herramientas basadas en web 2.0 y los servicios y aplicaciones en la nube; favorecen la generación de ideas, el desarrollo y evaluación de productos y posibilita la interacción entre diversos co-creadores. Para iniciar un proceso de co-creación se requiere métodos y herramientas adecuados para interactuar con los participantes e intercambiar experiencias, procesos para integrar la co-creación dentro de la operativa de la empresa, y desarrollar una organización y cultura que soporten y fomenten dicho proceso. Entre los métodos más efectivos están la Netnografía que estudia las conversaciones de las comunidades en internet; colaboración con usuarios pioneros que van por delante del Mercado y esperan un gran beneficio de la satisfacción de sus necesidades o deseos; los estudios de innovación que permiten al usuario definir y a menudo crear su propia solución y la externalización a la multitud, que mediante una convocatoria abierta plantea a la comunidad retos a resolver a cambio de algún tipo de recompensa. La especialización de empresas subcontratistas en el desarrollo y fabricación de semiconductores; facilita la innovación abierta colaborando con diversas entidades en las diversas fases del desarrollo del semiconductor y su ecosistema. La co-creación se emplea actualmente en el sector de los semiconductores para detectar ideas de diseños y aplicaciones, a menudo mediante concursos de innovación. El servicio de soporte técnico y la evaluación de los semiconductores con frecuencia es fruto de la colaboración entre los miembros de la comunidad fomentada y soportada por los fabricantes del producto. Con el programa EBVchips se posibilita el acceso a empresas pequeñas y medianas a la co-creación de semiconductores con los fabricantes en un proceso coordinado y patrocinado por el distribuidor EBV. Los semiconductores configurables como las FPGAs constituyen otro ejemplo de co-creación mediante el cual el fabricante proporciona el circuito integrado y el entorno de desarrollo y los clientes crean el producto final definiendo sus características y funcionalidades. Este proceso se enriquece con bloques funcionales de diseño, IP-cores, que a menudo son creados por la comunidad de usuarios. ABSTRACT. The semiconductor market is saturated of similar products and distributors with a similar proposal for services. The processes of co-creation in which the customer collaborates in the definition and development of the product and provides information about its utility, performance and perceived value, resulting in a product that solves their real needs, are becoming a step forward in the differentiation and expansion of the value chain. The design and semiconductor manufacturing process is quite complex, requires increasingly higher investments and demands complete solutions. It requires an ecosystem that supports the development of electronic equipments based on such semiconductors. The ease of dialogue and sharing information that provides internet, web 2.0-based tools and services and applications in the cloud; favor the generation of ideas, the development and evaluation of products and allows the interaction between various co-creators. To start a process of co-creation adequate methods and tools are required to interact with the participants and exchange experiences, processes to integrate the co-creation within the operations of the company, and developing an organization and culture that support and promote such process. Among the most effective methods are the Netnography that studies the conversations of the communities on the internet; collaboration with Lead Users who are ahead of the market and expect a great benefit from the satisfaction of their needs or desires; Innovation studies that allow the user to define and often create their own solution and Crowdsourcing, an open call to the community to solve challenges in exchange for some kind of reward. The specialization of subcontractors in the development and manufacture of semiconductors; facilitates open innovation in the context of collaboration with different entities working in the different phases of the development of the semiconductor and its ecosystem. Co-creation is used currently in the semiconductor sector to detect ideas of designs and applications, often through innovation’s contests. Technical support and evaluation of semiconductors frequently is the result of collaboration between members of the community fostered and supported by the manufacturers of the product. The EBVchips program provides access to small and medium-sized companies to the co-creation of semiconductors with manufacturers in a process coordinated and sponsored by the Distributor EBV. Configurable semiconductors like FPGAs are another example of co-creation whereby the manufacturer provides the integrated circuit and the development environment and customers create the final product by defining their features and functionality. This process is enriched with IP-cores, designs blocks that are often created by the user community.

ASSOCIATIVISMO EMPRESARIAL ENTRE MICRO E PEQUENAS EMPRESAS: A EXPERIÊNCIA DO GRANDE ABC COM O PROJETO EMPREENDER (SEBRAE)

O associativismo empresarial aparece como forma de desenvolvimento regional, seja este econômico, social ou cultural, e é grande aliado para o surgimento e crescimento das micro e pequenas empresas. É um tema já vivenciado e estudado por vários países do mundo, entre eles europeus e especificamente italianos, mas ainda pouco estudado e conhecido no Brasil. A presente pesquisa objetivou analisar o associativismo empresarial entre micro e pequenas empresas (MPEs) na região do Grande ABC (GABC) pelo Projeto Empreender (SEBRAE) relacionando seus dados com os publicados do relatório 2003/5 de autoria do Observatório Europeu de estudos sobre pequenas e médias empresas europeias, analisando as formas de associativismo aqui ocorridas, além de identificar o perfil das empresas e empresários envolvidos no projeto. Para tal análise foram coletados dados de um total de 63 empresas do Projeto Empreender, nos núcleos de Santo André, São Caetano do Sul e Ribeirão Pires. Do GABC foram coletados dados utilizando o instrumento desenvolvido pelo Observatório Europeu de estudos sobre pequenas e médias empresas. A análise dos dados coletados no GABC em relação aos dados europeus se fez necessária para que pudessem ser encontrados pontos de divergências e convergências em cada uma das experiências, objetivando o aprendizado e evolução do tema. A escolha do GABC foi motivada pelo fato da região passar por mudanças no seu perfil econômico, passando de berço e grande pólo das grandes indústrias para um grande centro de pequenas empresas prestadoras de serviços. Após coleta e análise dos dados, percebeu-se que a experiência do GABC e a ocorrida na Itália se parecem em muitos aspectos, porém tem grandes diferenças estruturais. Enquanto o projeto europeu é de responsabilidade de um órgão da União Europeia, aqui o projeto é de autoria do SEBRAE e sofre grandes conflitos com as Associações Comerciais e Industriais (ACIs) da região quando o tema é custeio das despesas das pessoas e estrutura que envolve a implantação do projeto. Além disso, conclui-se que é necessária uma maior aproximação dos municípios com o projeto, tendo em vista que isto poderia ser fator de incentivo a entrada de novas empresas além de fator de aumento de seriedade do sistema. Mais dois dados merecem destaque. Primeiro o fato do Projeto Empreender ter pouca visibilidade regional, ou seja, ser muito pouco divulgado, e o fato da agência de desenvolvimento do GABC não ter aproximação alguma com o projeto. Por último, surgem dados no decorrer da pesquisa que rompem a barreira das teorias administrativas conhecidas, tais como a amizade como fator de associativismo. Portanto, os resultados obtidos com essa pesquisa apontam para a influência no incentivo ao desenvolvimento do processo associativista na região do GABC, além de servir como incentivador para a aproximação de outros atores sociais no processo.(AU)

ASSOCIATIVISMO EMPRESARIAL ENTRE MICRO E PEQUENAS EMPRESAS: A EXPERIÊNCIA DO GRANDE ABC COM O PROJETO EMPREENDER (SEBRAE)

O associativismo empresarial aparece como forma de desenvolvimento regional, seja este econômico, social ou cultural, e é grande aliado para o surgimento e crescimento das micro e pequenas empresas. É um tema já vivenciado e estudado por vários países do mundo, entre eles europeus e especificamente italianos, mas ainda pouco estudado e conhecido no Brasil. A presente pesquisa objetivou analisar o associativismo empresarial entre micro e pequenas empresas (MPEs) na região do Grande ABC (GABC) pelo Projeto Empreender (SEBRAE) relacionando seus dados com os publicados do relatório 2003/5 de autoria do Observatório Europeu de estudos sobre pequenas e médias empresas europeias, analisando as formas de associativismo aqui ocorridas, além de identificar o perfil das empresas e empresários envolvidos no projeto. Para tal análise foram coletados dados de um total de 63 empresas do Projeto Empreender, nos núcleos de Santo André, São Caetano do Sul e Ribeirão Pires. Do GABC foram coletados dados utilizando o instrumento desenvolvido pelo Observatório Europeu de estudos sobre pequenas e médias empresas. A análise dos dados coletados no GABC em relação aos dados europeus se fez necessária para que pudessem ser encontrados pontos de divergências e convergências em cada uma das experiências, objetivando o aprendizado e evolução do tema. A escolha do GABC foi motivada pelo fato da região passar por mudanças no seu perfil econômico, passando de berço e grande pólo das grandes indústrias para um grande centro de pequenas empresas prestadoras de serviços. Após coleta e análise dos dados, percebeu-se que a experiência do GABC e a ocorrida na Itália se parecem em muitos aspectos, porém tem grandes diferenças estruturais. Enquanto o projeto europeu é de responsabilidade de um órgão da União Europeia, aqui o projeto é de autoria do SEBRAE e sofre grandes conflitos com as Associações Comerciais e Industriais (ACIs) da região quando o tema é custeio das despesas das pessoas e estrutura que envolve a implantação do projeto. Além disso, conclui-se que é necessária uma maior aproximação dos municípios com o projeto, tendo em vista que isto poderia ser fator de incentivo a entrada de novas empresas além de fator de aumento de seriedade do sistema. Mais dois dados merecem destaque. Primeiro o fato do Projeto Empreender ter pouca visibilidade regional, ou seja, ser muito pouco divulgado, e o fato da agência de desenvolvimento do GABC não ter aproximação alguma com o projeto. Por último, surgem dados no decorrer da pesquisa que rompem a barreira das teorias administrativas conhecidas, tais como a amizade como fator de associativismo. Portanto, os resultados obtidos com essa pesquisa apontam para a influência no incentivo ao desenvolvimento do processo associativista na região do GABC, além de servir como incentivador para a aproximação de outros atores sociais no processo.(AU)

Asset-backed securities: The key to unlocking Europe's credit markets? Bruegel Policy Contribution 2014/07, 24 July 2014

The European market for asset-backed securities (ABS) has all but closed for business since the start of the economic and financial crisis. ABS (see Box 1) were in fact the first financial assets hit at the onset of the crisis in 2008. The subprime mortgage meltdown caused a deterioration in the quality of collateral in the ABS market in the United States, which in turn dried up overall liquidity because ABS AAA notes were popular collateral for inter-bank lending. The lack of demand for these products, together with the Great Recession in 2009, had a considerable negative impact on the European ABS market. The post-crisis regulatory environment has further undermined the market. The practice of slicing and dicing of loans into ABS packages was blamed for starting and spreading the crisis through the global financial system. Regulation in the post-crisis context has thus been relatively unfavourable to these types of instruments, with heightened capital requirements now necessary for the issuance of new ABS products. And yet policymakers have recently underlined the need to revitalise the ABS market as a tool to improve credit market conditions in the euro area and to enhance transmission of monetary policy. In particular, the European Central Bank and the Bank of England have jointly emphasised that: “a market for prudently designed ABS has the potential to improve the efficiency of resource allocation in the economy and to allow for better risk sharing... by transforming relatively illiquid assets into more liquid securities. These can then be sold to investors thereby allowing originators to obtain funding and, potentially, transfer part of the underlying risk, while investors in such securities can diversify their portfolios... . This can lead to lower costs of capital, higher economic growth and a broader distribution of risk” (ECB and Bank of England, 2014a). In addition, consideration has started to be given to the extent to which ABS products could become the target of explicit monetary policy operations, a line of action proposed by Claeys et al (2014). The ECB has officially announced the start of preparatory work related to possible outright purchases of selected ABS1. In this paper we discuss how a revamped market for corporate loans securitised via ABS products, and how use of ABS as a monetary policy instrument, can indeed play a role in revitalising Europe’s credit market. However, before using this instrument a number of issues should be addressed: First, the European ABS market has significantly contracted since the crisis. Hence it needs to be revamped through appropriate regulation if securitisation is to play a role in improving the efficiency of resource allocation in the economy. Second, even assuming that this market can expand again, the European ABS market is heterogeneous: lending criteria are different in different countries and banking institutions and the rating methodologies to assess the quality of the borrowers have to take these differences into account. One further element of differentiation is default law, which is specific to national jurisdictions in the euro area. Therefore, the pool of loans will not only be different in terms of the macro risks related to each country of origination (which is a ‘positive’ idiosyncratic risk, because it enables a portfolio manager to differentiate), but also in terms of the normative side, in case of default. The latter introduces uncertainties and inefficiencies in the ABS market that could create arbitrage opportunities. It is also unclear to what extent a direct purchase of these securities by the ECB might have an impact on the credit market. This will depend on, for example, the type of securities targeted in terms of the underlying assets that would be considered as eligible for inclusion (such as loans to small and medium-sized companies, car loans, leases, residential and commercial mortgages). The timing of a possible move by the ECB is also an issue; immediate action would take place in the context of relatively limited market volumes, while if the ECB waits, it might have access to a larger market, provided steps are taken in the next few months to revamp the market. We start by discussing the first of these issues – the size of the EU ABS market. We estimate how much this market could be worth if some specific measures are implemented. We then discuss the different options available to the ECB should they decide to intervene in the EU ABS market. We include a preliminary list of regulatory steps that could be taken to homogenise asset-backed securities in the euro area. We conclude with our recommended course of action.

ASSOCIATIVISMO EMPRESARIAL ENTRE MICRO E PEQUENAS EMPRESAS: A EXPERIÊNCIA DO GRANDE ABC COM O PROJETO EMPREENDER (SEBRAE)

O associativismo empresarial aparece como forma de desenvolvimento regional, seja este econômico, social ou cultural, e é grande aliado para o surgimento e crescimento das micro e pequenas empresas. É um tema já vivenciado e estudado por vários países do mundo, entre eles europeus e especificamente italianos, mas ainda pouco estudado e conhecido no Brasil. A presente pesquisa objetivou analisar o associativismo empresarial entre micro e pequenas empresas (MPEs) na região do Grande ABC (GABC) pelo Projeto Empreender (SEBRAE) relacionando seus dados com os publicados do relatório 2003/5 de autoria do Observatório Europeu de estudos sobre pequenas e médias empresas europeias, analisando as formas de associativismo aqui ocorridas, além de identificar o perfil das empresas e empresários envolvidos no projeto. Para tal análise foram coletados dados de um total de 63 empresas do Projeto Empreender, nos núcleos de Santo André, São Caetano do Sul e Ribeirão Pires. Do GABC foram coletados dados utilizando o instrumento desenvolvido pelo Observatório Europeu de estudos sobre pequenas e médias empresas. A análise dos dados coletados no GABC em relação aos dados europeus se fez necessária para que pudessem ser encontrados pontos de divergências e convergências em cada uma das experiências, objetivando o aprendizado e evolução do tema. A escolha do GABC foi motivada pelo fato da região passar por mudanças no seu perfil econômico, passando de berço e grande pólo das grandes indústrias para um grande centro de pequenas empresas prestadoras de serviços. Após coleta e análise dos dados, percebeu-se que a experiência do GABC e a ocorrida na Itália se parecem em muitos aspectos, porém tem grandes diferenças estruturais. Enquanto o projeto europeu é de responsabilidade de um órgão da União Europeia, aqui o projeto é de autoria do SEBRAE e sofre grandes conflitos com as Associações Comerciais e Industriais (ACIs) da região quando o tema é custeio das despesas das pessoas e estrutura que envolve a implantação do projeto. Além disso, conclui-se que é necessária uma maior aproximação dos municípios com o projeto, tendo em vista que isto poderia ser fator de incentivo a entrada de novas empresas além de fator de aumento de seriedade do sistema. Mais dois dados merecem destaque. Primeiro o fato do Projeto Empreender ter pouca visibilidade regional, ou seja, ser muito pouco divulgado, e o fato da agência de desenvolvimento do GABC não ter aproximação alguma com o projeto. Por último, surgem dados no decorrer da pesquisa que rompem a barreira das teorias administrativas conhecidas, tais como a amizade como fator de associativismo. Portanto, os resultados obtidos com essa pesquisa apontam para a influência no incentivo ao desenvolvimento do processo associativista na região do GABC, além de servir como incentivador para a aproximação de outros atores sociais no processo.(AU)

Exchange rate exposure : do size and foreign operations matter?

Purpose – The purpose of this paper is to examine the effect of firm size and foreign operations on the exchange rate exposure of UK non-financial companies from January 1981 to December 2001. Design/methodology/approach – The impact of the unexpected changes in exchange rates on firms’ stock returns is examined. In addition, the movements in bilateral, equally weighted (EQW) and trade-weighted and exchange rate indices are considered. The sample is classified according to firm size and the extent of firms’ foreign operations. In addition, structural changes on the relationship between exchange rate changes and individual firms’ stock returns are examined over three sub-periods: before joining the exchange rate mechanism (pre-ERM), during joining the ERM (in-ERM), and after departure from the ERM (post-ERM). Findings – The findings indicate that a higher percentage of UK firms are exposed to contemporaneous exchange rate changes than those reported in previous studies. UK firms’ stock returns are more affected by changes in the EQW, and US$ European currency unit exchange rate, and respond less significantly to the basket of 20 countries’ currencies relative to the UK pound exchange rate. It is found that exchange rate exposure has a more significant impact on stock returns of the large firms compared with the small and medium-sized companies. The evidence is consistent across all specifications using different exchange rate. The results provide evidence that the proportion of significant foreign exchange rate exposure is higher for firms which generate a higher percentage of revenues from abroad. The sensitivities of firms’ stock returns to exchange rate fluctuations are most evident in the pre-ERM and post-ERM periods. Practical implications – This study provides important implications for public policymakers, financial managers and investors on how common stock returns of various sectors react to exchange rate fluctuations. Originality/value – The empirical evidence supports the view that UK firms’ stock returns are affected by foreign exchange rate exposure.

Social capital and tacit knowledge sharing in organisational projects in Malaysian ICT companies

An increasing number of organisational researchers have turned to social capital theory in an attempt to better understand the impetus for knowledge sharing at the individual and organisational level. This thesis extends that research by investigating the impact of social capital on knowledge sharing at the group-level in the organisational project context. The objective of the thesis is to investigate the importance of social capital in fostering tacit knowledge sharing among the team members of a project. The analytical focus is on the Nahapiet and Ghoshal framework of social capital but also includes elements of other scholars' work. In brief, social capital is defined as an asset that is embedded in the network of relationships possessed by an individual or social unit. It is argued that the main dimensions of social capital that are of relevance to knowledge sharing are structural, cognitive, and relational because these, among other things, foster the exchange and combination of knowledge and resources among the team members. Empirically, the study is based on the grounded theory method. Data were collected from five projects in large, medium, and small ICT companies in Malaysia. Underpinned by the constant comparative method, data were derived from 55 interviews, and observations. The data were analysed using open, axial, and selective coding. The analysis also involved counting frequency occurrence from the coding generated by grounded theory to find the important items and categories under social capital dimensions and knowledge sharing, and for further explaining sub-groups within the data. The analysis shows that the most important dimension for tacit knowledge sharing is structural capital. Most importantly, the findings also suggest that structural capital is a prerequisite of cognitive capital and relational capital at the group-level in an organisational project. It also found that in a project context, relational capital is hard to realise because it requires time and frequent interactions among the team members. The findings from quantitative analysis show that frequent meetings and interactions, relationship, positions, shared visions, shared objectives, and collaboration are among the factors that foster the sharing of tacit knowledge among the team members. In conclusion, the present study adds to the existing literature on social capital in two main ways. Firstly, it distinguishes the dimensions of social capital and identifies that structural capital is the most important dimension in social capital and it is a prerequisite of cognitive and relational capital in a project context. Secondly, it identifies the causal sequence in the dimension of social capital suggesting avenues for further theoretical and empirical work in this emerging area of inquiry.

The impact of NC machinery upon manufacturing industry

The changing face of industry due to the adoption of `New Technology' is briefly discussed, as are the corresponding structural changes in the workforce. The adoption of NC machinery is identified as one of the major innovations affecting the structure of industry. The development of NC machinery, and of relevant programming techniques are reviewed, and the problems arising from its initial sponsorship by the aerospace industry are highlighted. The process of its subsequent diffusion into industry is reviewed. Skill levels adopted for NC use in Britain and Germany are discussed, and analysed to create a structural pattern. These classifications of skill levels are then used to examine the organisational structures adopted by companies utilising NC machines. The greater use made of higher level shop floor skills by German companies is discussed. The results of two surveys of the use made of NC by companies in the North East of England are presented. Effective company organisation for NC use is described, and lack of foresight is shown to lead to vulnerability problems where skills can become concentrated in a few key people. This led to closure of a company in one instance. It is shown that small sub-contract companies have adopted a highly skilled shop floor workforce, and that they have survived in the present hostile economic environment, whilst companies who have used NC to de-skill the shop floor contracted dramatically in the same period. The lack of awareness of the potential for reviewing the product design in relation to the flexibility of NC, so leading to reductions in work in progress levels, is highlighted. Recommendations for skill structures appropriate to various sized companies and suitable training programs are presented to ensure that the full potential of NC machinery is achieved.

Exchange rate exposure:do size and foreign operations matter?

Purpose – The purpose of this paper is to examine the effect of firm size and foreign operations on the exchange rate exposure of UK non-financial companies from January 1981 to December 2001. Design/methodology/approach – The impact of the unexpected changes in exchange rates on firms’ stock returns is examined. In addition, the movements in bilateral, equally weighted (EQW) and trade-weighted and exchange rate indices are considered. The sample is classified according to firm size and the extent of firms’ foreign operations. In addition, structural changes on the relationship between exchange rate changes and individual firms’ stock returns are examined over three sub-periods: before joining the exchange rate mechanism (pre-ERM), during joining the ERM (in-ERM), and after departure from the ERM (post-ERM). Findings – The findings indicate that a higher percentage of UK firms are exposed to contemporaneous exchange rate changes than those reported in previous studies. UK firms’ stock returns are more affected by changes in the EQW, and US$ European currency unit exchange rate, and respond less significantly to the basket of 20 countries’ currencies relative to the UK pound exchange rate. It is found that exchange rate exposure has a more significant impact on stock returns of the large firms compared with the small and medium-sized companies. The evidence is consistent across all specifications using different exchange rate. The results provide evidence that the proportion of significant foreign exchange rate exposure is higher for firms which generate a higher percentage of revenues from abroad. The sensitivities of firms’ stock returns to exchange rate fluctuations are most evident in the pre-ERM and post-ERM periods. Practical implications – This study provides important implications for public policymakers, financial managers and investors on how common stock returns of various sectors react to exchange rate fluctuations. Originality/value – The empirical evidence supports the view that UK firms’ stock returns are affected by foreign exchange rate exposure.

Avaliação da efetividade do Programa de Alimentação do Trabalhador

This study analyzed the Worker’s Healthy Eating Program in Rio Grande do Norte state (RN) to assess its possible impact on the nutritional status of the workers benefitted. To that end, we conducted a cross-sectional observational prospective study based on a multistage stratified random sample comparing 26 small and medium-sized companies from the Manufacturing Sector (textiles, food and beverages, and nonmetallic minerals) of RN, divided into two equal groups (WFP and Non WFP). Interviews were conducted at each company by trained interviewers from Tuesday to Saturday between September and December 2014. Data were collected on the company (characterization and information regarding the program’s desired results) and workers (personal and professional information, anthropometrics, health, lifestyle and food consumed the previous day). Population estimates were calculated for RN on the characteristics of workers and the study variables. The main variable was BMI. The secondary variables were waist circumference (WC), nutritional diagnosis, calorie intake, blood pressure, metabolic variables and lifestyle indicators. The statistical method used was hierarchical mixed effects linear regression for interval variables and hierarchical mixed effects logistic regression for binary variables. The variables measured in ordinal scales were analyzed by ordinal logistic regression adjusted for correlated variables, adopting robust standard errors. The results for interval variables are presented as point estimates and their 95% confidence intervals; and as odds-ratios and their 95% confidence intervals for binary variables. The Fisher’s exact and Student’s t-tests were used for simple comparisons between proportions and means, respectively. Differences were considered statistically significant at p<0.05. A total of 1069 workers were interviewed, of which 541 were from the WFP group and 528 from the Non WFP group. Subjects were predominantly males and average age was 34.5 years. Significant intergroup differences were observed for schooling level, income above 1 MW (minimum wage) and specific training for their position at the company. The results indicated a significant difference between the BMI of workers benefitted, which was on average 0.989 kg/m2 higher than the BMI of workers from the Non WFP group (p=0.002); and between the WC, with the waist circumference of WFP group workers an average of 1.528 cm larger (p<0.05). Higher prevalence of overweight and obesity (p<0.001) and cardiovascular risk (p=0.038) were recorded in the WFP group. Tests on the possible effect of the WFP on health (blood pressure and metabolic indicators) and lifestyle indicators (smoking, alcohol consumption and exercise) were not significant. With respect to worker’s diets, differences were significant for consumption of saturated fat (lunch and daily intake), salt (lunch, other meals and daily intake) and proteins (other meals and daily intake), with higher consumption of these nutrients in the WFP group. The study showed a possible positive impact of the WFP on nutritional status (BMI and WC) among the workers benefitted. No possible effects of the program were observed for the lifestyle indicators studied. Workers benefitted consumed less salt, saturated fat and protein. The relevance of the WFP is recognized for this portion of society and it is understood that, if the program can reach and impact those involved, the development of educational initiatives aimed at nutritional and food safety may also exert a positive influence.