Nano-fabrication of complex functional structures using non- conventional lithography

In Chapter 1 I will present a brief introduction on the state of art of nanotechnologies, nanofabrication techniques and unconventional lithography as a technique to fabricate the novel electronic device as resistive switch so-called memristor is shown. In Chapter 2 a detailed description of the main fabrication and characterization techniques employed in this work is reported. Chapter 3 parallel local oxidation lithography (pLOx) describes as a main technique to obtain accurate patterning process. All the effective parameters has been studied and the optimized condition observed to highly reproducible with excellent patterned nanostructures. The effect of negative bias, calls local reduction (LR) studied. Moreover, the use of AC bias shows faster patterning process respect to DC bias. In Chapter 4 (metal/ e-SiO2/ Si nanojunction) it is shown how the electrochemical oxide nanostructures by using pLOx can be used in the fabrication of novel devices call memristor. We demonstrate a new concept, based on conventional materials, where the lifetime problem is resolved by introducing a “regeneration” step, which restores the nano-memristor to its pristine condition by applying an appropriate voltage cycle. In Chapter 5 (Graphene/ e-SiO2/ Si), Graphene as a building block material is used as an electrode to selectively oxidize the silicon substrate by pLOx set up for the fabrication of novel resistive switch device. In Chapter 6 (surface architecture) I will show another application of pLOx in biotechnology is shown. So the surface functionalization combine with nano-patterning by pLOx used to design a new surface to accurately bind biomolecules with the possibility of studying those properties and more application in nano-bio device fabrication. So, in order to obtain biochips, electronic and optical/photonics devices Nano patterning of DNA used as scaffolds to fabricate small functional nano-components.

Hydrodynamic induced by an array of wave energy converters. Experimental and numerical analysis

The thesis analyses the hydrodynamic induced by an array of Wave energy Converters (WECs), under an experimental and numerical point of view. WECs can be considered an innovative solution able to contribute to the green energy supply and –at the same time– to protect the rear coastal area under marine spatial planning considerations. This research activity essentially rises due to this combined concept. The WEC under exam is a floating device belonging to the Wave Activated Bodies (WAB) class. Experimental data were performed at Aalborg University in different scales and layouts, and the performance of the models was analysed under a variety of irregular wave attacks. The numerical simulations performed with the codes MIKE 21 BW and ANSYS-AQWA. Experimental results were also used to calibrate the numerical parameters and/or to directly been compared to numerical results, in order to extend the experimental database. Results of the research activity are summarized in terms of device performance and guidelines for a future wave farm installation. The device length should be “tuned” based on the local climate conditions. The wave transmission behind the devices is pretty high, suggesting that the tested layout should be considered as a module of a wave farm installation. Indications on the minimum inter-distance among the devices are provided. Furthermore, a CALM mooring system leads to lower wave transmission and also larger power production than a spread mooring. The two numerical codes have different potentialities. The hydrodynamics around single and multiple devices is obtained with MIKE 21 BW, while wave loads and motions for a single moored device are derived from ANSYS-AQWA. Combining the experimental and numerical it is suggested –for both coastal protection and energy production– to adopt a staggered layout, which will maximise the devices density and minimize the marine space required for the installation.

New technology enables high precision multislit collimators for microbeam radiation therapy

During the past decade microbeam radiation therapy has evolved from preclinical studies to a stage in which clinical trials can be planned, using spatially fractionated, highly collimated and high intensity beams like those generated at the x-ray ID17 beamline of the European Synchrotron Radiation Facility. The production of such microbeams typically between 25 and 100 microm full width at half maximum (FWHM) values and 100-400 microm center-to-center (c-t-c) spacings requires a multislit collimator either with fixed or adjustable microbeam width. The mechanical regularity of such devices is the most important property required to produce an array of identical microbeams. That ensures treatment reproducibility and reliable use of Monte Carlo-based treatment planning systems. New high precision wire cutting techniques allow the fabrication of these collimators made of tungsten carbide. We present a variable slit width collimator as well as a single slit device with a fixed setting of 50 microm FWHM and 400 microm c-t-c, both able to cover irradiation fields of 50 mm width, deemed to meet clinical requirements. Important improvements have reduced the standard deviation of 5.5 microm to less than 1 microm for a nominal FWHM value of 25 microm. The specifications of both devices, the methods used to measure these characteristics, and the results are presented.

Integrated phased array transducer for on-board structural health monitoring

Permanently bonded onto a structure, an integrated Phased Array (PhA II) transducer that can provide reliable electromechanical connection with corresponding sophisticated miniaturized ?all in one? SHM electronic device installed directly above it, without need for any interface cabling, during all aerospace structure lifecycle phases and for a huge variety of real harsh service environments of structures to be monitored is presented. This integrated PhA II transducer [1], as a key component of the PAMELA SHM? (Phased Array Monitoring for Enhanced Life Assessment) system, has two principal tasks at the same time, reliably transceive elastic waves in real aerospace service environments and serves as a reliable sole carrier or support for associated integrated on-board SHM electronic device attached above. The PhA II transducer successfully accomplished both required task throughout extensive test campaigns which included low to high temperature tests, temperature cycling, mechanical loading, combined thermo- mechanical loading and vibration resistance, etc. both with and without SHM device attached above due to RTCA DO-160F.

Instrumentación de referencia para realización automática de ensayos de fiabilidad

En todo proceso de desarrollo de un dispositivo electrónico o equipo cabe la necesidad de evaluar la fiabilidad de sus componentes, es decir, cual es el porcentaje de equipos que tras un determinado periodo de vida mantiene todas sus funcionalidades dentro de especificaciones. La evaluación de la fiabilidad mediante ensayos acelerados es la herramienta que permite una estimación de la vida del dispositivo o equipo de forma previa a su comercialización. La cuantificación de la fiabilidad es crítica para identificar los costos de un determinado periodo de garantía, y para ofrecer a los clientes el nivel de calidad deseado. El objetivo de este Proyecto Fin de Carrera, es el diseño de un sistema automático de instrumentación versátil, para la realización y caracterización de ensayos acelerados, el cual nos sirva para abordar una amplia gama de ensayos con los que evaluar la fiabilidad de los dispositivos electrónicos o equipos. Además del uso industrial donde se evaluará la fiabilidad de forma previa a la comercialización, este sistema se podrá emplear en la docencia de esta área, y fundamentalmente para la realización de ensayos acelerados en investigación de dispositivos electrónicos. La versatilidad de nuestro hardware y aplicación software es un punto a favor, ya que con este sistema de instrumentación se pueden realizar numerosos tipos de ensayos acelerados, sin el problema de tener que cambiar toda la instrumentación, cada vez que se quiera realizar otro ensayo distinto. Los componentes que se elijan para realizar el ensayo acelerado, serán sometidos a un estrés (tensión, corriente, humedad, temperatura…) y se podrá ir observando cómo envejecen, lo que nos permite evaluar la vida del dispositivo en un corto periodo, emulando sus condiciones de trabajo, además de estudiar la fiabilidad también se puede identificar como se degradan sus características principales antes del fallo. El Software utilizado en este Proyecto se ha implementado con un lenguaje de programación gráfico para instrumentación, LabVIEW. La aplicación software se explica de manera muy detallada a lo largo de la memoria, para que su uso y adaptación si fuese necesario no suponga ningún problema para el usuario. En la última parte de esta memoria se encuentra la guía de usuario y un ensayo acelerado planteado como ejemplo. Explicaremos como se han interconectado los equipos a los componentes en los que se va a realizar el ensayo y así se comprobará el correcto funcionamiento del software tomando las medidas necesarias. ABTRACT In all process of development of an electronic device or equipment, we have the need to evaluate the reliability of its components, that is to say, what percentage of equipment that after a certain period of life keeps all of its functionalities within specifications. The evaluation of reliability by means of accelerated tests is the tool that allows an estimation of the lifetime of the device or equipment prior to its marketing. The quantification of reliability is critical to identify the costs of a specific warranty period, and to offer customers the desired quality level. The objective of this Thesis is the design of an automatic very versatile instrument for the realization and characterization of accelerated tests, which will help us to address a wide range of tests to assess the reliability of the devices or electronic equipment. In addition to industrial use where test the reliability before its commercialization, use it can be used in teaching of this area, fundamentally for the realization of accelerated testing in the investigation of electronic devices. The versatility of our hardware and software implementation is a plus, given that this instrumentation system can perform numerous types of accelerated tests, without the problem to have to change everything, every time you want to make another different test. The components that will be chosen to perform the accelerated test, will be subjected to stress (voltage, current, humidity, temperature ...) and you can observe how they age, allowing us to evaluate the life of the device in a short period, emulating their working conditions. In addition to studying the reliability it can also identify how its main characteristics are degraded before failure. The software used in this Thesis has been implemented with a graphical programming language for instrumentation, LabVIEW. This software is explained in great detail throughout the Thesis, so that its use and adaptation, if necessary, will not be a problem for the user. In the last part of this memory we will expose a user guide and test that we have done. We will explain how the equipment has been interconnected to the components in which we are going to perform the test and so we will check the correct operation of the software taking the necessary measures.

Desarrollo del teclado virtual “Mokey” basado en gestos para personas con movilidad reducida: capa de sistema

La Realidad Aumentada forma parte de múltiples proyectos de investigación desde hace varios años. La unión de la información del mundo real y la información digital ofrece un sinfín de posibilidades. Las más conocidas van orientadas a los juegos pero, gracias a ello, también se pueden implementar Interfaces Naturales. En otras palabras, conseguir que el usuario maneje un dispositivo electrónico con sus propias acciones: movimiento corporal, expresiones faciales, etc. El presente proyecto muestra el desarrollo de la capa de sistema de una Interfaz Natural, Mokey, que permite la simulación de un teclado mediante movimientos corporales del usuario. Con esto, se consigue que cualquier aplicación de un ordenador que requiera el uso de un teclado, pueda ser usada con movimientos corporales, aunque en el momento de su creación no fuese diseñada para ello. La capa de usuario de Mokey es tratada en el proyecto realizado por Carlos Lázaro Basanta. El principal objetivo de Mokey es facilitar el acceso de una tecnología tan presente en la vida de las personas como es el ordenador a los sectores de la población que tienen alguna discapacidad motora o movilidad reducida. Ya que vivimos en una sociedad tan informatizada, es esencial que, si se quiere hablar de inclusión social, se permita el acceso de la actual tecnología a esta parte de la población y no crear nuevas herramientas exclusivas para ellos, que generarían una situación de discriminación, aunque esta no sea intencionada. Debido a esto, es esencial que el diseño de Mokey sea simple e intuitivo, y al mismo tiempo que esté dotado de la suficiente versatilidad, para que el mayor número de personas discapacitadas puedan encontrar una configuración óptima para ellos. En el presente documento, tras exponer las motivaciones de este proyecto, se va a hacer un análisis detallado del estado del arte, tanto de la tecnología directamente implicada, como de otros proyectos similares. Se va prestar especial atención a la cámara Microsoft Kinect, ya que es el hardware que permite a Mokey detectar la captación de movimiento. Tras esto, se va a proceder a una explicación detallada de la Interfaz Natural desarrollada. Se va a prestar especial atención a todos aquellos algoritmos que han sido implementados para la detección del movimiento, así como para la simulación del teclado. Finalmente, se va realizar un análisis exhaustivo del funcionamiento de Mokey con otras aplicaciones. Se va a someter a una batería de pruebas muy amplia que permita determinar su rendimiento en las situaciones más comunes. Del mismo modo, se someterá a otra batería de pruebas destinada a definir su compatibilidad con los diferentes tipos de programas existentes en el mercado. Para una mayor precisión a la hora de analizar los datos, se va a proceder a comparar Mokey con otra herramienta similar, FAAST, pudiendo observar de esta forma las ventajas que tiene una aplicación especialmente pensada para gente discapacitada sobre otra que no tenía este fin. ABSTRACT. During the last few years, Augmented Reality has been an important part of several research projects, as the combination of the real world and the digital information offers a whole new set of possibilities. Among them, one of the most well-known possibilities are related to games by implementing Natural Interfaces, which main objective is to enable the user to handle an electronic device with their own actions, such as corporal movements, facial expressions… The present project shows the development of Mokey, a Natural Interface that simulates a keyboard by user’s corporal movements. Hence, any application that requires the use of a keyboard can be handled with this Natural Interface, even if the application was not designed in that way at the beginning. The main objective of Mokey is to simplify the use of the computer for those people that are handicapped or have some kind of reduced mobility. As our society has been almost completely digitalized, this kind of interfaces are essential to avoid social exclusion and discrimination, even when it is not intentional. Thus, some of the most important requirements of Mokey are its simplicity to use, as well as its versatility. In that way, the number of people that can find an optimal configuration for their particular condition will grow exponentially. After stating the motivations of this project, the present document will provide a detailed state of the art of both the technologies applied and other similar projects, highlighting the Microsoft Kinect camera, as this hardware allows Mokey to detect movements. After that, the document will describe the Natural Interface that has been developed, paying special attention to the algorithms that have been implemented to detect movements and synchronize the keyboard. Finally, the document will provide an exhaustive analysis of Mokey’s functioning with other applications by checking its behavior with a wide set of tests, so as to determine its performance in the most common situations. Likewise, the interface will be checked against another set of tests that will define its compatibility with different softwares that already exist on the market. In order to have better accuracy while analyzing the data, Mokey’s interface will be compared with a similar tool, FAAST, so as to highlight the advantages of designing an application that is specially thought for disabled people.

Habilidades auditivas e de linguagem de crianças usuárias de implante coclear: análise dos marcadores clínicos de desenvolvimento

INTRODUÇÃO: Os marcadores clínicos de desenvolvimento possibilitam aos profissionais se familiarizarem com a sequência do desenvolvimento das habilidades auditivas e de linguagem e sinalizarem para a família quando há algum padrão desviante do esperado para o desenvolvimento da criança. O objetivo da presente pesquisa foi determinar os marcadores clínicos de desenvolvimento das habilidades auditivas e de linguagem falada, a partir da análise dos primeiros cinco anos de uso do IC de crianças implantadas antes dos 36 meses; e investigar a influência da idade de implantação no desenvolvimento das habilidades citadas. MÉTODOS: Estudo longitudinal retrospectivo realizado na Seção de Implante Coclear - Centro de Pesquisas Audiológicas (CPA-HRAC/USP). Fizeram parte da amostra 230 crianças que, para análise comparativa, foram dividas em três grupos: operadas e ativadas antes dos 18 meses, entre 19 e 24 meses e entre 25 e 36 meses de idade. Os procedimentos analisados foram: a Infant-Toddler: Meaningful Auditory Integration Scale (IT-MAIS), a Meaningful Use of Speech Scale (MUSS) e as Categorias de Audição e de Linguagem. Os dados coletados foram analisados por meio das estatísticas descritiva e indutiva. RESULTADOS: Durante os primeiros cinco anos de uso do IC foram analisados nove retornos das crianças ao Centro. A partir da análise da mediana, até os 30 ± 3 meses de uso do dispositivo eletrônico grande parte da amostra atingiu 100% na IT-MAIS, quando as habilidades de atenção e de atribuição dos significados aos sons já estavam superadas. Até os 68 ± 6 meses a maioria das crianças alcançou a porcentagem máxima na MUSS e a pontuação máxima nas Categorias de Audição e de Linguagem, ou seja, as crianças já utilizavam a fala espontânea e as estratégias de comunicação em sua rotina, bem como apresentavam as habilidades de reconhecimento auditivo em conjunto aberto e a fluência da linguagem oral, respectivamente. Quando comparados os desempenhos dos grupos, nas avaliações auditivas não houve um padrão de significância estatística e nas avaliações da linguagem os resultados foram significativamente melhores para as crianças implantadas após os 18 meses nos primeiros retornos. Houve fortes correlações entre os resultados das Escalas e Categorias. CONCLUSÕES: As crianças da amostra desenvolveram progressivamente as habilidades auditivas e de linguagem falada ao longo dos primeiros cinco anos de uso do IC. Foi possível determinar os marcadores clínicos de desenvolvimento para as Escalas e Categorias estudadas. A partir deles os profissionais que acompanham a criança no processo de habilitação auditiva, poderão nortear a família, bem como os demais profissionais que atuam com a criança, quanto aos resultados esperados na IT-MAIS, na MUSS e nas Categorias de Audição e Linguagem. Também, foi possível identificar que, mesmo havendo uma restrição quanto as possíveis variáveis que podem interferir na determinação dos marcadores clínicos, houve pacientes com resultados desviantes, sugerindo a importância da definição dos marcadores para, juntamente com a família, o profissional discutir e encontrar outras variáveis que possam influenciar no baixo desempenho da criança. A implantação dentro do período sensível do desenvolvimento pode explicar comportamento auditivo dos grupos quando comparados. Já, quando analisada a linguagem falada, acredita-se que houve a influência de outras variáveis no processo de habilitação auditiva e não apenas a implantação durante o período crítico

Geometric phases of scattering states in a ring geometry: adiabatic pumping in mesoscopic devices

Geometric phases of scattering states in a ring geometry are studied on the basis of a variant of the adiabatic theorem. Three timescales, i.e., the adiabatic period, the system time and the dwell time, associated with adiabatic scattering in a ring geometry play a crucial role in determining geometric phases, in contrast to only two timescales, i.e., the adiabatic period and the dwell time, in an open system. We derive a formula connecting the gauge invariant geometric phases acquired by time-reversed scattering states and the circulating (pumping) current. A numerical calculation shows that the effect of the geometric phases is observable in a nanoscale electronic device.

Simultaneous clock recovery and data regeneration using a nonlinear optical loop mirror as an all-optical mixer

High-speed optical clock recovery, demultiplexing and data regeneration will be integral parts of any future photonic network based on high bit-rate OTDM. Much research has been conducted on devices that perform these functions, however to date each process has been demonstrated independently. A very promising method of all-optical switching is that of a semiconductor optical amplifier-based nonlinear optical loop mirror (SOA-NOLM). This has various advantages compared with the standard fiber NOLM, most notably low switching power, compact size and stability. We use the SOA-NOLM as an all-optical mixer in a classical phase-locked loop arrangement to achieve optical clock recovery, while at the same time achieving data regeneration in a single compact device

Simultaneous clock recovery and data regeneration using a nonlinear optical loop mirror as an all-optical mixer

High-speed optical clock recovery, demultiplexing and data regeneration will be integral parts of any future photonic network based on high bit-rate OTDM. Much research has been conducted on devices that perform these functions, however to date each process has been demonstrated independently. A very promising method of all-optical switching is that of a semiconductor optical amplifier-based nonlinear optical loop mirror (SOA-NOLM). This has various advantages compared with the standard fiber NOLM, most notably low switching power, compact size and stability. We use the SOA-NOLM as an all-optical mixer in a classical phase-locked loop arrangement to achieve optical clock recovery, while at the same time achieving data regeneration in a single compact device

E-learning

E-learning means learning via electronic means and is therefore an all-embracing term covering learning via an electronic device. The "expectations" and "realities" for each of the delivery mechanisms within the electronic arena vary greatly for not just the learners themselves, but also the site providers. Because of this, each of these learning systems has vastly different design principles, which is not always understood by those unfamiliar with technology. What is appropriate for a CD-ROM off-line system is generally inappropriate for an on- line internet system. So when designing an e-learning system it is important to understand how the information is to be accessed by the learner. This paper will identify and suggest some ways to avoid e-learning's pitfalls and reap its rewards.

Integración de dispositivos electrónicos inteligentes en Smart Grid

El sector eléctrico está experimentando cambios importantes tanto a nivel de gestión como a nivel de mercado. Una de las claves que están acelerando este cambio es la penetración cada vez mayor de los Sistemas de Generación Distribuida (DER), que están dando un mayor protagonismo al usuario a la hora de plantear la gestión del sistema eléctrico. La complejidad del escenario que se prevé en un futuro próximo, exige que los equipos de la red tenga la capacidad de interactuar en un sistema mucho más dinámico que en el presente, donde la interfaz de conexión deberá estar dotada de la inteligencia necesaria y capacidad de comunicación para que todo el sistema pueda ser gestionado en su conjunto de manera eficaz. En la actualidad estamos siendo testigos de la transición desde el modelo de sistema eléctrico tradicional hacia un nuevo sistema, activo e inteligente, que se conoce como Smart Grid. En esta tesis se presenta el estudio de un Dispositivo Electrónico Inteligente (IED) orientado a aportar soluciones para las necesidades que la evolución del sistema eléctrico requiere, que sea capaz de integrase en el equipamiento actual y futuro de la red, aportando funcionalidades y por tanto valor añadido a estos sistemas. Para situar las necesidades de estos IED se ha llevado a cabo un amplio estudio de antecedentes, comenzando por analizar la evolución histórica de estos sistemas, las características de la interconexión eléctrica que han de controlar, las diversas funciones y soluciones que deben aportar, llegando finalmente a una revisión del estado del arte actual. Dentro de estos antecedentes, también se lleva a cabo una revisión normativa, a nivel internacional y nacional, necesaria para situarse desde el punto de vista de los distintos requerimientos que deben cumplir estos dispositivos. A continuación se exponen las especificaciones y consideraciones necesarias para su diseño, así como su arquitectura multifuncional. En este punto del trabajo, se proponen algunos enfoques originales en el diseño, relacionados con la arquitectura del IED y cómo deben sincronizarse los datos, dependiendo de la naturaleza de los eventos y las distintas funcionalidades. El desarrollo del sistema continua con el diseño de los diferentes subsistemas que lo componen, donde se presentan algunos algoritmos novedosos, como el enfoque del sistema anti-islanding con detección múltiple ponderada. Diseñada la arquitectura y funciones del IED, se expone el desarrollo de un prototipo basado en una plataforma hardware. Para ello se analizan los requisitos necesarios que debe tener, y se justifica la elección de una plataforma embebida de altas prestaciones que incluye un procesador y una FPGA. El prototipo desarrollado se somete a un protocolo de pruebas de Clase A, según las normas IEC 61000-4-30 e IEC 62586-2, para comprobar la monitorización de parámetros. También se presentan diversas pruebas en las que se han estimado los retardos implicados en los algoritmos relacionados con las protecciones. Finalmente se comenta un escenario de prueba real, dentro del contexto de un proyecto del Plan Nacional de Investigación, donde este prototipo ha sido integrado en un inversor dotándole de la inteligencia necesaria para un futuro contexto Smart Grid.

A Reduced Device-Count Hybrid Multilevel Inverter Topology with single DC Source and Improved Fault Tolerance

A new hybrid multilevel power converter topology is presented in this paper. The proposed power converter topology uses only one DC source and floating capacitors charged to asymmetrical voltage levels, are used for generating different voltage levels. The SVPWM based control strategy used in this converter maintains the capacitor voltages at the required levels in the entire modulation range including the over-modulation region. For the voltage levels: nine and above, the number of components required in the proposed topology is significantly lower, compared to the conventional multilevel inverter topologies. The number of capacitors required in this topology reduces drastically compared to the conventional flying capacitor topology, when the number of levels in the inverter output increases. This topology has better fault tolerance, as it is capable of operating with reduced number of levels, in the entire modulation range, in the event of any failure in the H-bridges. The transient as well as the steady state performance of the nine-level version of the proposed topology is experimentally verified in the entire modulation range including the over-modulation region.

All-optical regenerative memory using a single device

In recent years the optical domain has been traditionally reserved for node-to-node transmission with the processing and switching achieved entirely in the electrical domain. However, with the constantly increasing demand for bandwidth and the resultant increase in transmission speeds, there is a very real fear that current electronic technology as used for processing will not be able to cope with future demands. Fuelled by this requirement for faster processing speeds, considerable research is currently being carried out into the potential of All-optical processing. One of the fundamental obstacles in realising All-optical processing is the requirement for All-optical buffering. Without all-optical buffers it is extremely difficult to resolve situations such as contention and congestion. Many devices have been proposed to solve this problem however none of them provide the perfect solution. The subject of this research is to experimentally demonstrate a novel all-optical memory device. Unlike many previously demonstrated optical storage devices the device under consideration utilises only a single loop mirror and a single SOA as its switch, whilst providing full regenerative capabilities required for long-term storage. I will explain some of the principles and characteristics of the device, which will then be experimentally demonstrated. The device configuration will then be studied and investigated as to its suitability for Hybrid Integrated Technology.

Secure authentication procedure with mobile device for ubiquitous health environments

Medical industries have brought Information Technology (IT) in their systems for both patients and medical staffs due to the numerous benefits of IT we experience at presently. Moreover, the Mobile healthcare (M-health) system has been developed as the first step of Ubiquitous Health Environment (UHE). With the mobility and multi-functions, M-health system will be able to provide more efficient and various services for both doctors and patients. Due to the invisible feature of mobile signals, hackers have easier access to hospital networks than wired network systems. This may result in several security incidents unless security protocols are well implemented. In this paper, user authentication and authorization procedures will applied as a featured component at each level of M-health systems inthe hospital environment. Accordingly, M-health system in the hospital will meet the optimal requirements as a countermeasure to its vulnerabilities.