Simplified design method for energy dissipating devices in retrofitting of seismically isolated bridges

Abstract: Highway bridges have great values in a country because in case of any natural disaster they may serve as lines to save people’s lives. Being vulnerable under significant seismic loads, different methods can be considered to design resistant highway bridges and rehabilitate the existing ones. In this study, base isolation has been considered as one efficient method in this regards which in some cases reduces significantly the seismic load effects on the structure. By reducing the ductility demand on the structure without a notable increase of strength, the structure is designed to remain elastic under seismic loads. The problem associated with the isolated bridges, especially with elastomeric bearings, can be their excessive displacements under service and seismic loads. This can defy the purpose of using elastomeric bearings for small to medium span typical bridges where expansion joints and clearances may result in significant increase of initial and maintenance cost. Thus, supplementing the structure with dampers with some stiffness can serve as a solution which in turn, however, may increase the structure base shear. The main objective of this thesis is to provide a simplified method for the evaluation of optimal parameters for dampers in isolated bridges. Firstly, performing a parametric study, some directions are given for the use of simple isolation devices such as elastomeric bearings to rehabilitate existing bridges with high importance. Parameters like geometry of the bridge, code provisions and the type of soil on which the structure is constructed have been introduced to a typical two span bridge. It is concluded that the stiffness of the substructure, soil type and special provisions in the code can determine the employment of base isolation for retrofitting of bridges. Secondly, based on the elastic response coefficient of isolated bridges, a simplified design method of dampers for seismically isolated regular highway bridges has been presented in this study. By setting objectives for reduction of displacement and base shear variation, the required stiffness and damping of a hysteretic damper can be determined. By modelling a typical two span bridge, numerical analyses have followed to verify the effectiveness of the method. The method has been used to identify equivalent linear parameters and subsequently, nonlinear parameters of hysteretic damper for various designated scenarios of displacement and base shear requirements. Comparison of the results of the nonlinear numerical model without damper and with damper has shown that the method is sufficiently accurate. Finally, an innovative and simple hysteretic steel damper was designed. Five specimens were fabricated from two steel grades and were tested accompanying a real scale elastomeric isolator in the structural laboratory of the Université de Sherbrooke. The test procedure was to characterize the specimens by cyclic displacement controlled tests and subsequently to test them by real-time dynamic substructuring (RTDS) method. The test results were then used to establish a numerical model of the system which went through nonlinear time history analyses under several earthquakes. The outcome of the experimental and numerical showed an acceptable conformity with the simplified method.

Reciclaje de pavimentos : estudio de las ventajas económicas del reciclaje en frío in situ de pavimentos asfalticos

En los procesos de mantenimiento y rehabilitación de pavimentos, se deben definir los objetivos, bien sea para realizar unas reparaciones superficiales sobre daños generados por el agua como consecuencia de fallas en los drenajes, o bien realizar una intervención sobre la estructura buscando recuperarla a sus condiciones de diseño originales, la cual se realiza con el proceso de reciclaje el cual tiene en cuenta las características físico-químicas de los materiales existentes los cuales se consideran sufrieron el adecuado proceso que les permitió hacer parte de la estructura. Existiendo cuatro tipos de reciclaje de los cuales se realiza una descripción general de cada proceso, el presente trabajo se concentra en el análisis técnico – económico del proceso ―In situ‖ en frio, método utilizado en la rehabilitación de la vía Sopetrán - Puente de Occidente, en el Departamento de Antioquia, en una longitud de 13 Km. El presente estudio se realiza verificando el cumplimiento de las especificaciones a nivel nacional que para estos procesos estableció el Instituto Nacional de Vías (INVIAS) y verificando el cumplimiento de las normas IDU ET-2005. El reciclaje ―in situ‖ en frio tiene ventajas ecológicas (no necesita afectar las eventuales fuentes de materiales de la zona), económico (bajos costos comparados con reconstrucción) y técnico (los equipos para este proceso han presentado importantes avances tecnológicos) lo cual permitió su aplicación en la vía mencionada, lo cual con la adición de un agente estabilizador (cemento para el presente estudio) permite recuperar las condiciones iniciales de diseño de la estructura intervenida. El árbol de decisiones es una herramienta utilizada para el análisis y selección de la mejor opción de estructura a realizar teniendo en cuenta calidad y costos. El presente trabajo termina con un análisis detallado de las condiciones existentes, revisión de las diferentes opciones de intervención y el estudio económico de las diferentes alternativas de estructura de pavimento para la rehabilitación de la vía referida.

Projeto de reabilitação energética de piscinas interiores

O presente relatório de projeto explicita as etapas da elaboração e os resultados obtidos através da realização de um projeto de reabilitação energética de um complexo de piscinas interiores. Esta reabilitação energética tem por objetivo a redução dos custos energéticos através da subtração de consumos supérfluos de energia ou da melhoria da eficiência energética dos equipamentos. Para alcançar estes objetivos recorreu-se à simulação dinâmica do edifício de modo a estimar múltiplas variáveis energéticas e identificar quais os setores e equipamentos que maior influência têm no consumo energético do complexo em estudo. Para a realização da simulação, recorreu-se a um software desenvolvido pelo DOE dos Estados Unidos da América, o Energy Plus, com o auxílio do Design Builder, que permite a criação e edição do modelo de forma mais fácil e acessível. Os valores retirados da simulação foram posteriormente comparados com valores reais. Com o complexo caraterizado e os principais consumidores identificados foi possível iniciar o estudo das medidas de melhoria da eficiência energética. As principais medidas estudadas incidiram na instalação de coberturas isotérmicas nas piscinas para reduzir a perda de energia através da evaporação e da radiação, a introdução de fontes de energia renovável como alternativa energética, substituição de elementos do sistema de iluminação e o aproveitamento de energia dissipada em equipamentos. Com este estudo, a entidade gestora do complexo encontra-se mais informada e pronta a tomar decisões que influenciem de forma significativa o consumo de energia no complexo, podendo optar pela instalação de alguma das medidas propostas.

Design investigation of the Lake Calumet Complex: improving water quality to regenerate local industrial, community, and ecosystem resources

This design thesis is an inquiry of the highly industrialized urban landscape of the Lake Calumet Complex on the South Side of the City of Chicago. It examines geologic and anthropogenic strata within this region as waste used for staging various social, industrial, and ecological systems. Today, these social, industrial, and ecological systems are not responsive to each other and certainly do not possess resilient attributes that would allow them to interact within the landscape in perpetuity. The resulting design strategy seeks to re-think the treatment of waste in the landscape into a new framework for future park design. This park will serve as grounds to interweave these complex systems in order to rehabilitate ecosystem functions and improve water quality. Additionally the park hybridizes many social and ecological functions to improve community recreational opportunities and gain public acceptance and appeal.

Anticipatory Accounts

C. Wright Mills called for a truly sociological analysis of actors’ “motive talk,” which decouples the commonsense link between the reasons actors give for their actions and their mental state prior to those actions. Subsequent theoretical and empirical work has focused almost entirely on actors’ retrospective accounting for untoward conduct that has already taken place. The other aspect of Mills’s program, the reasons actors give for potentially untoward future conduct and in particular the empirical investigation of the link between the availability of an acceptable vocabulary of motives for anticipated conduct and the eventual enactment of that conduct, has been largely ignored. This article seeks to rehabilitate these lost dimensions using data from a longitudinal study of mothers’ infant feeding choices and practices. It examines how mothers account, in advance, for the possibility that they may eventually feed their babies in ways they consider suboptimal. Thirty of the thirty-six women interviewed indicated that they intended to breastfeed, emphasizing the benefits of this practice to their babies. However, seventeen of these women also anticipated that they might abandon breastfeeding and presented elaborate accounts of the motives that could lead them to do so. The findings support Mills’s claim that the availability of an acceptable vocabulary of motives for untoward conduct increases the probability that one will engage in such conduct. Mothers who had offered elaborate anticipatory accounts for abandoning breastfeeding were much more likely to do so than those who did not offer such accounts.

Caracterização Microestrutural e Tribocorrosiva de Sistemas Metalocerâmicos Odontológicos do Tipo Ni-Cr/Porcelana E Ni-Cr/Ti/Porcelana

The partial fixed prosthodontics restoration is used to rehabilitate form and function of partial or total compromised teeth, having to remain permanently joined to remainder tooth. The most useful material on prosthodontics is the feldspar porcelain, commercialized as aluminosilicate powders. Dental porcelains are presented with limited mechanical properties to rehabilitate extensive spaces. The association with Ni-Cr metallic systems (metal-ceramic system) allows that the metallic substructure compensates the fragile porcelain nature, preserving the thermal insulation and aesthetics desirable, as well as reducing the possibility of cracking during matication efforts. Cohesive flaws by low mechanical strength connect the metallic substructure to the oral environment, characterized by a electrolytic solution (saliva), by aggressive temperature, pH cyclic changes and mechanical requests. This process results on ionic liberation that could promote allergic or inflammatory responses, and/or clinical degradation of ceramometal system. The aim of this study was to evaluate the presence of an intermediate titanium layer on the microscopic fracture behavior of porcelains on ceramometal systems. Plasma deposition of titanium films result in regular passivating oxide layers which act as barriers to protect the metallic substrate against the hazardous effects of corrosive saliva. Tribocorrosion tests were performed to simulate the oral environment and mechanical stress, making it possible the early detection of crack formation and growth on metal-ceramic systems, which estimate the adherence between the compounds of this system. Plain samples consisting of dental feldspar porcelain deposited either onto metallic substrates or titanium films were fired and characterized by scanning electron microscopy. The result showed that the titanium film improved the adherence of the system compared to conventional metal-ceramic interfaces, thus holding crack propagation

Um percurso no vale de Campanhã

Dissertação de mest. em Gestão Cultural, Faculdade de Ciências Humanas e Sociais, Univ. do Algarve, 2005

Plantar a cidade

Dissertação para obtenção do grau de Mestre em Arquitectura, apresentada na Universidade de Lisboa - Faculdade de Arquitetura.

Memória da história no reabilitar

Dissertação para obtenção do grau de Mestre em Arquitectura, apresentada na Universidade de Lisboa - Faculdade de Arquitectura.

Projectar com o lugar

Dissertação para obtenção do grau de Mestre em Arquitcetura, apresentada na Universidade de Lisboa - Faculdade de Arquitectura.

Arquitectura de espaços abertos

Dissertação para obtenção do grau de Mestre em Arquitectura, apresentada na Universidade de Lisboa - Faculdade de Arquitectura.

Modernizing Mount Royal Park : Montréal’s Jungle in the 1950s

Durant les années 1950, les autorités municipales, sous la pression du département de la police, ont demandé le déboisement d’une section du parc du Mont-Royal. Cette section, communément appelée la « Jungle » et principalement composée de broussailles, de buissons et d’arbres, était fréquentée par une clientèle considérée comme indésirable. Cette dernière comprenait, essentiellement, des alcooliques, des voyous, des pervers, et, surtout, des homosexuels. Leur éradication s’est alors déployée selon un plan en trois étapes qui avait pour objectif de simplifier les techniques de surveillance utilisées par le département de la police. D’abord, une augmentation de l’éclairage, puis, le déboisement de la « Jungle », et, finalement, la construction d’une route, aujourd’hui connue sous le nom de Camillien-Houde. Le parc devenait ainsi plus accessible et plus sécuritaire. Les coupes, que l’on a appelées les « coupes de la moralité », ont eu un effet considérable sur l’environnement et la composition écologique du parc, donnant, entre autres, aux Montréalais, l’impression que le parc était devenu chauve (ce qui lui conféra d’ailleurs le surnom de Mont Chauve). Les transformations du parc du Mont-Royal n’étaient cependant pas limitées à sa Jungle. En fait, des modifications furent aussi mises en application dans d’autres sections considérées comme sous-développées. La métamorphose du parc et de sa « Jungle » était un acte de développement caractéristique de l’ère moderniste de la planification du Montréal d’après-guerre. La re-planification du parc du Mont-Royal témoigne ainsi d’une volonté sans bornes des autorités d’instaurer la moralité et la modernité dans la ville, volonté qui aura pour conséquence d’altérer la composition écologique du parc. C’est ce qui sera à l’origine d’une campagne nommée « Save-the-Mountain Movement », qui a cherché à empêcher la modernisation de l’espace et milité pour la réhabilitation du parc en tant que boisé paisible.

Étude sur la sécurité dynamique : le cas de Cité-des-Prairies

Travail dirigé présenté à la Faculté des études supérieures en vue de l’obtention du grade de maître ès sciences (M.Sc.) en criminologie option sécurité intérieure

Modernizing Mount Royal Park : Montréal’s Jungle in the 1950s

Durant les années 1950, les autorités municipales, sous la pression du département de la police, ont demandé le déboisement d’une section du parc du Mont-Royal. Cette section, communément appelée la « Jungle » et principalement composée de broussailles, de buissons et d’arbres, était fréquentée par une clientèle considérée comme indésirable. Cette dernière comprenait, essentiellement, des alcooliques, des voyous, des pervers, et, surtout, des homosexuels. Leur éradication s’est alors déployée selon un plan en trois étapes qui avait pour objectif de simplifier les techniques de surveillance utilisées par le département de la police. D’abord, une augmentation de l’éclairage, puis, le déboisement de la « Jungle », et, finalement, la construction d’une route, aujourd’hui connue sous le nom de Camillien-Houde. Le parc devenait ainsi plus accessible et plus sécuritaire. Les coupes, que l’on a appelées les « coupes de la moralité », ont eu un effet considérable sur l’environnement et la composition écologique du parc, donnant, entre autres, aux Montréalais, l’impression que le parc était devenu chauve (ce qui lui conféra d’ailleurs le surnom de Mont Chauve). Les transformations du parc du Mont-Royal n’étaient cependant pas limitées à sa Jungle. En fait, des modifications furent aussi mises en application dans d’autres sections considérées comme sous-développées. La métamorphose du parc et de sa « Jungle » était un acte de développement caractéristique de l’ère moderniste de la planification du Montréal d’après-guerre. La re-planification du parc du Mont-Royal témoigne ainsi d’une volonté sans bornes des autorités d’instaurer la moralité et la modernité dans la ville, volonté qui aura pour conséquence d’altérer la composition écologique du parc. C’est ce qui sera à l’origine d’une campagne nommée « Save-the-Mountain Movement », qui a cherché à empêcher la modernisation de l’espace et milité pour la réhabilitation du parc en tant que boisé paisible.

Étude sur la sécurité dynamique : le cas de Cité-des-Prairies

Travail dirigé présenté à la Faculté des études supérieures en vue de l’obtention du grade de maître ès sciences (M.Sc.) en criminologie option sécurité intérieure