(Table 2, page 470), Spectrographic values for the chemical composition of a Pacific Ocean manganese nodule

Average quantitative spectrographic data are presented for V, Ti, Zr, Ni, Co, Sc, Cr and La in the following Pacific deep-sea cores: siliceous ooze (3), red clay (6), volcanic mud (3), calcareous ooze (3) and one manganese nodule, and in 23 near-shore cores, mostly from the Gulf of Mexico.

(Table, page 500) Geochemistry of a pancake-shaped concretion from lake Charlotte, Canada

A pancake-shaped concretion from Ship Harbour Lake, a small freshwater lake in eastern Nova Scotia (now named Lake Charlotte) is part of collection sent to the National Museum of Canada by Mr. R. A. Logan, of the Pan American Airvays. These concretions are of similar to the well-known marine concretions with a composition similar to wad. These are known only from abyssmal depths of the sea in the red clay deposits, while the present concretions occur in very shallow lake waters. They should be of interest to geologists, who may be concerned with the rather difficult problem which some concretions raise of distinguishing between concretions of syngenitic and epigenetic origin.

Annotated record of the detailed examination of Mn deposits in a core from R/V Hakuho Maru Cruise KH-74-4 station

A sediment core obtained from the northeastern Philippine Sea Basin was analyzed for 232Th, 230Th, 226Ra and 210Pb. Three sheets of Ferro-manganese oxide in a matrix of red clay were included in the 73 m core. Although the concentration of 232Th of land origin is normal as compared with that of the usual red clay or of the sediment obtained at the neighboring station, the concentration of radiogenic 230Th is extremely low and does not decrease with increasing depth. The radioactivity of rather soluble 226Ra at the station is not less than that of 230Th in the surface sediment, showing a tendency different from that observed in usual cores. Some enrichment in the comparatively short-lived 210Pb activity relative to 226Ra activity was found in the top sediment and in the first ferro-manganese sheet at the station. If the excess 210Pb in the ferro-manganese sheet is not due to contamination of the surface sediment, lead should migrate through the sheet. These facts suggest that the core has not been accumulating during the past few hundred thousand years or more.

(Table 1) Concentrations of Os, Ir, Pt and 187Os/188Os ratio in ODP Hole 130-806C samples

New osmium (Os) isotope and platinum group element (PGE) concentration data are used in conjunction with published 3He and Th isotope data to determine the relative proportions of lithogenic, extraterrestrial and hydrogenous iridium (Ir) in a Pacific pelagic carbonate sequence from the Ocean Drilling Program (ODP) Site 806 on the Ontong Java Plateau (OJP). These calculations demonstrate that lithogenic and extraterrestrial contributions to sedimentary Ir budget are minor, while hydrogenous Ir accounts for roughly 85% of the total Ir. Application of analogous partitioning calculations to previously reported data from a North Pacific red clay sequence (LL44-GPC3) yields very similar results. Total Ir burial fluxes at Site 806 and LL44-GPC3 are also similar, 45 and 30 pg/cm**2/kyr, respectively. Average Ir/3He and Ir/xs230Th_initial ratios calculated from the entire Site 806 data set are similar to those reported earlier for Pacific sites. In general, down-core profiles of Ir, 3He and xs230Th_initial, are not well correlated with one another. However, all three data sets show similar variance and yield sediment mass accumulation rate estimates that agree within a factor of two. While these results indicate that Ir concentration has potential as a point-paleoflux tracer in pelagic carbonates, Ir-based paleoflux estimates are likely subject to uncertainties that are similar to those associated with Co-based paleoflux estimates. Consequently, local calibration of Ir flux in space and time will be required to fully assess the potential of Ir as a point paleoflux tracer. Measured 187Os/188Os of the OJP sediments are systematically lower than the inferred 187Os/188Os of contemporaneous seawater and a clear glacial-interglacial 187Os/188Os variation is lacking. Mixing calculations suggest Os contributions from lithogenic sources are insufficient to explain the observed 187Os/188Os variations. The difference between the 187Os/188Os of bulk sediment and that of seawater is interpreted in terms of subtle contributions of unradiogenic Os carried by particulate extraterrestrial material. Down-core variations of 187Os/188Os with Pt/Ir and Os/Ir also point to contributions from extraterrestrial particles. Mixing calculations for each set of several triplicate analyses suggest that the unradiogenic Os end member cannot be characterized by primary extraterrestrial particles of chondritic composition. It is noteworthy that in efforts aimed at determining the effect of extraterrestrial contributions, 187Os/188Os of pelagic carbonates has greater potential compared to abundances of PGE. An attempt has been made for the first time to estimate sediment mass accumulation rates based on amount of extraterrestrial Os in the OJP samples and previously reported extraterrestrial Os flux. Throughout most of the OJP record, Os isotope-based paleoflux estimates are within a factor of two of those derived using other constant flux tracers. Meaningful flux estimates cannot be made during glacial maxima because the OJP sediments do not record the low 187Os/188Os reported previously. We speculate that this discrepancy may be related to focusing of extraterrestrial particles at the OJP, as has been suggested to explain down-core 3He variations.

Abyssal community analysis from replicate box cores in the central North Pacific

A 0.25 m**2 United States Naval Electronics Laboratory box corer was used to take replicate samples from an oligotrophic bottom under the North Pacific Central Water Mass (~28°N, 155°W). The bottom is a red clay with manganese nodules at a depth of 5500-5800 m. Macrofaunal density ranges from 84 to 160 individuals per m**2 and is therefore much the same as in Northwest Atlantic Gyre waters. Of the macrofaunal taxa, polychaetes dominate (55 %), followed by tanaids (18 %), bivalves (7 %), and isopods (6 %). Meiofaunal taxa were only partially retained by the 297 µm screen used in washing. Even then, they are 1.5-3.9 times as abundant as the macrofaunal taxa, with nematodes being numerically dominant by far. Foraminifera seem to comprise an important portion of the community, but could not be assessed accurately because of the inability to discriminate living and dead tests. Remains of what are probably xenophyophoridans are also very important, but offer the same problem. Faunal diversity is extremely high, with deposit feeders comprising the overwhelming majority. Most species are rare, being encountered only once. The distributions of only three species show any significant deviation from randomness. The polychaete fauna from box cores collected from 90 miles to the north was not significantly different from that of the principal study locality. Concordance appeared at several taxonomic levels, from species through macrofaunal/meiofaunal relationships. As a result, the variation in total animal abundance shows aggregation among cores. We discuss Sokolova's concept of a deep-sea oligotrophic zone dominated by suspension feeders, and reconcile it with our present findings. The high diversity of the fauna combined with the low food level contradict theories that relate diversity directly with productivity.

Agglutinated benthic foraminifera of the Upper Cretaceous

A reexamination of the agglutinated benthic foraminiferal microfaunas found in the Upper Cretaceous red and brown clays of DSDP Hole 603B and ODP Holes 640A and 641A allows us to refine the initial shipboard biostratigraphic interpretation and to propose a fourfold zonation that can be used with some precautions in the oceanic realm. By means of various calibrations, an attempt is also made to integrate this zonation in a worldwide chronostratigraphic framework. The resulting chronologic control permits us to discern large differences in the rhythm of red clay deposition on either side of the North Atlantic Ocean.

(Table 1) Helium concentration in sediments

Two decades ago, Merrihue (1964) reported 3He/4He ratios of >10**-4 in ferromagnetic separates from a Pacific deep ocean red clay and concluded that the high ratio is due to extraterrestrial debris amounting to ~1% of the sediment. A decade later Krylov et al. (1973) compiled 3He/4He isotopic data on ocean sediments measured in the Soviet Union and observed that the 3He/4He ratio is generally higher in pelagic sediments where the sedimentation rate is lower. They suggested that the high 3He/4He ratio was attributable to extraterrestrial materials which were concentrated in slowly accumulating ocean floor. However, these important discoveries were almost completely neglected until we re-examined the problem. We have measured 39 sediments from 12 different sites, 10 sites from the western to central Pacific and two sites from the Atlantic Ocean. We find 3He/4He ratios >5 * 10**-5 for six sites, well above the values generally observed in common terrestrial materials. The very high 3He/4He ratio in the sediments is probably due to input of extraterrestrial materials. Input of stratospheric dust of <1 p.p.m., which corresponds to a fallout rate of ~2,000 tons per year, can explain the observation.

Annotated record of the detailed examination of Mn deposits from the CLIMAX II (SCAN) Expedition stations aboard R/V Argo in the central North Pacific

A 0.25 m US Naval Electronics Lab box corer was used to take replicate samples from an oligotrophic bottom under the North Pacific Central Water Mass (approx. 28 degrees N, 155 degrees W). The bottom is a red clay with manganese nodules at a depth of 5500-5800 m. Macrofaunal density ranges from 84 to 160 individuals per m super(2) and is therefore much the same as in Northwest Atlantic Gyre waters. Of the macrofaunal taxa, polychaetes dominate (55 per cent), followed by tanaids (18 per cent), bivalves (7 per cent), and isopods (6 per cent). Meiofaunal taxa were only partially retained by the 297 micrometer screen used in washing. Even then, they are 1.5-3.9 times as abundant as the microfaunal taxa, with nematodes being numerically dominant by far. Foraminifera seem to comprise an important portion of the community, but could not be assessed accurately because of the inability to discriminate living and dead tests. Remains of what are probably xenophyophoridans are also very important, but offer the same problem. Faunal diversity is extremely high, with deposit feeders comprising the overwhelming majority. Most spp are rare, being encountered only once. The distributions of only 3 spp show any significant deviation from randomness. The polychaete fauna from box cores collected from 90 m to the north was not significantly different from that of the principal study locality. Concordance appeared at several taxonomic levels, from spp through microfaunal/ meiofaunal relationships. As a result, the variation in total animal abundance shows aggregation among cores. The authors discuss Sokolova's concept of a deep-sea oligotrophic zone dominated by suspension feeders, and reconcile it with our present findings. The high diversity of the fauna combined with the low food level contradict theories that relate diversity directly with productivity.

(Table 1) Composition of bottom sediments from the East Pacific

Adsorption of ion, nickel, cobalt, and manganese from ocean water by calcareous sediments, diatomaceous ooze, hydrogenous sediments, and red clay was studied under close to natural conditions using a tracer method. It was found that hydrogenous sediments selectively remove manganese from seawater. This may be associated with formation of chemical compounds between manganese and sediment material. It was also found that nickel, manganese, and iron exist in the ocean in several ionic and neutral forms. Cobalt typically present in only one ionic form Co(2+).

(Table 1) Iron and manganese speciations in surface layer bottom sediments of the Pacific Ocean

Distribution of iron and manganese speciations in ocean sediments of a section from the coast of Japan to the open Pacific Ocean is under consideration. Determinations of total iron, as well as of reactive iron contents and of total manganese, as well as of Mn4+ contents have been done. Significant increase of total Fe content in sediments from the coast to the pelagic zone occurs without noticeable increase in reactive Fe content. Presence of layers of volcanic and terrigenous coarse clastic material in clayey sediments results to sharp change in iron content. Manganese content increases from near coastal to pelagic sediments more than 10 times; oxidation degree of sediments also increases. There are three types of bottom sediments different by contents of iron and manganese forms: reduced, oxidized (red clay), and transitional. Content of total Fe is almost does not change with depth in sediments, content of reactive Fe increases in reduced sediments, and decreases in oxidized ones. Manganese content in red clay mass increases several times.

Analysis of manganese nodules in lakes of Scotland

During the "Challenger" Deep-Sea Exploring Expedition a great many peculiar-looking manganese nodules or concretions were dredged from the floor of the ocean at great depths, chiefly in the Red Clay areas of the Pacific. In the present paper we propose to point out the distribution of the oxides of manganese in the geological series of rocks, in fresh and sea water, and in marine deposits, with special reference to our explorations in the lochs of the west of Scotland; to give an account of investigations undertaken to ascertain the source of the manganese present in marine deposits in the form of the higher oxides, and thereafter to discuss the various views that have been advanced to explain the formation and distribution of manganese concretions in marine deposits in general.

Annotated record of Mn deposits from R/V Anton Bruun, Cruise 17 Expedition stations

Station 678E (29°22'S. latitude, 80WW. longitude) is roughly midway between San Felix and Juan Fernandez Islands, and approximately 700 km west of the coast of Chile. The sample at Station 678E was collected in a Riedl Dredge with a finer net sewn into the cod end of the 500 JJ mesh bag. The change in depth during the dredging operation indicated a rather rapid shelving. The bottom was a red clay with some volcanic ash. Manganese nodules were present (rock dredge sample).

Efeito da adição de feldspato e/ou resíduo de caulin em formulações à base de argila ilítica

The red pottery industry in Piauí state is well developed and stands out at the national context for the technical quality of its products. The floor and wall tile industry, however, is little developed since the state has only one company that produces red clay-based ceramic tiles. This thesis aims at using the predominantly illitic basic mass of the above mentioned industry, with the addition of feldspar and/or kaolin residue in order to obtain products of higher technical quality. Kaolin residue consists basically of kaolinite, muscovite mica and quartz; the feldspar used was potassic. In this experiment, basic mass (MB) was used for experimental control and fifteen formulations codified as follows: F2, F4, F8, F16, F32, FR2, FR4, FR8, FR16, FR32, R2, R4, R8, R16 and R32. All raw materials were dry-milled, classified, formulated and then humidified to 10% water. Thereafter, test samples were produced by unixial pressing process in a rectangular steel matrix (60.0 x 20.0 x 5.0) mm3 at (25 MPa). They were fired at four temperatures: 1080°C, 1120°C, 1160°C, with a heating rate of 10°C/min during up to 10 min in an electric oven, and the last one in an industrial oven with a peak of 1140°C, aim ing to confirm the results found in laboratory and, finally, technological tests were performed: MEA, RL, AA, PA, TRF and PF. The results revealed that the residue under study can be considered a raw material with large potential in the industry of red clay-based ceramic tiles, since the results found both in laboratory and in the industry have shown that the test samples produced from the formulations with up to 4% feldspar and those produced with up to 8% feldspar and residue permitted a reduction in the water absorption rate and an increase in the mechanical resistance while those samples produced with up to 4% residue had an increase in the mechanical resistance when compared to those produced from the basic mass and that the formulation with 2% feldspar and residue presented the best technological properties, lowering the sintering temperature down to 1120°C

Tracing acidification induced by Deccan Phase 2 volcanism

The Deccan Volcanic Province (DVP) was built up by three major phases of eruptions; the most voluminous of which, the Deccan Phase 2, encompassed the Cretaceous–Palaeogene (KT) boundary. Deccan eruptions have been implicated as a contributor to the end-Cretaceous mass extinction, however, mechanism by which volcanic activity affected biota remains poorly understood. We applied a combination of rock magnetic techniques scanning electron microscopy to characterize mineral assemblages of three sections of intertrappean lacustrine sediments from the north-western Maharashtra Deccan Volcanic Provinces. Our results indicate that in sediments deposited during the early stages of the Deccan Phase 2, the Daïwal River and Dhapewada sequences, iron-bearing mineral association is dominated by detrital iron oxides (magnetite and hematite) sourced from the weathering of the surrounding basaltic bedrocks, with minor contribution form authigenic iron sulphides (framboidal pyrite, pyrrhotite and/or greigite). The sediments deposited during the final stages of Phase 2 (the Podgawan sequence) differ significantly in their characteristics. In particular, the Podgawan sediments have 1) very low magnetic susceptibility values, but higher terrigenous fraction (clays and shales) content; 2) more complex assemblage of magnetic minerals, 3) ubiquitous presence of Fe–Ca–Ce vanadates; and 4) unusual lithological variations in the middle part of the section (represented by a charcoal-rich level that is capped by a red clay layer containing fossilized bacterial colonies). We suggest that these unusual characteristics reflect increased acidity in the region during the deposition of the Podgawan sequence, likely due to cumulative effects of volcanic aerosols released during the Deccan Phase 2 eruptions. The combination of these features may be used to recognize episodes of increased acidity in the geological record. Our results also contribute to understanding of local vs. global effects of the Deccan volcanism.

Pozzolanic properties of rice husk ash, burnt clay and red mud

In this paper materials like rice husk ash, burnt clay and red mud are examined for their pozzolanic properties. Rice husk ash, obtained from various sources, is analysed by X-ray diffraction. Compressive strength properties of lime-pozzolana mortars with rice husk ash, burnt clay and red mud as pozzolana are studied. Influence of grinding of rice husk ash and intergrinding with lime are also investigated. Combination pozzolana with partial replacement of burnt clay and red mud by rice husk ash are examined for their pozzolanic properties. Long term strength behaviour of lime-pozzolana mortars is investigated to understand the durability of lime-pozzolana cements.