Design and experimental characterization of antennas and wireless systems for innovative wearable and implantable ultra low–power applications

The present PhD thesis exploits the design skills I have been improving since my master thesis’ research. A brief description of the chapters’ content follows. Chapter 1: the simulation of a complete front–end is a very complex problem and, in particular, is the basis upon which the prediction of the overall performance of the system is possible. By means of a commercial EM simulation tool and a rigorous nonlinear/EM circuit co–simulation based on the Reciprocity Theorem, the above–mentioned prediction can be achieved and exploited for wireless links characterization. This will represent the theoretical basics of the entire present thesis and will be supported by two RF applications. Chapter 2: an extensive dissertation about Magneto–Dielectric (MD) materials will be presented, together with their peculiar characteristics as substrates for antenna miniaturization purposes. A designed and tested device for RF on–body applications will be described in detail. Finally, future research will be discussed. Chapter 3: this chapter will deal with the issue regarding the exploitation of renewable energy sources for low–energy consumption devices. Hence the problem related to the so–called energy harvesting will be tackled and a first attempt to deploy THz solar energy in an innovative way will be presented and discussed. Future research will be proposed as well. Chapter 4: graphene is a very promising material for devices to be exploited in the RF and THz frequency range for a wide range of engineering applications, including those ones marked as the main research goal of the present thesis. This chapter will present the results obtained during my research period at the National Institute for Research and Development in Microtechnologies (IMT) in Bucharest, Romania. It will concern the design and manufacturing of antennas and diodes made in graphene–based technology for detection/rectification purposes.

Algoritmi per la correzione di distorsioni in immagini

Studio, analisi ed implementazione di algoritmi esistenti per la correzione di distorsioni in immagini, con introduzione delle semplificazioni necessarie per la sua realizzazione in dispositivi embedded. Introduzione di nuovi metodi di semplificazione. Calibrazione di una telecamera o un sistema di telecamere stereo con lenti wide angle o fisheye tramite opencv.

Threshold-dependent effects on peripheral nerve in vivo excitability properties in the rat

Various factors, including maturity, have been shown to influence peripheral nerve excitability measures, but little is known about differences in these properties between axons with different stimulation thresholds. Multiple nerve excitability tests were performed on the caudal motor axons of immature and mature female rats, recording from tail muscles at three target compound muscle action potential (CMAP) levels: 10%, 40% ("standard" level), and 60% of the maximum CMAP amplitude. Compared to lower target levels, axons at high target levels have the following characteristics: lower strength-duration time constant, less threshold reduction during depolarizing currents and greater threshold increase to hyperpolarizing currents, most notably to long hyperpolarizing currents in mature rats. Threshold-dependent effects on peripheral nerve excitability properties depend on the maturation stage, especially inward rectification (Ih), which becomes inversely related to threshold level. Performing nerve excitability tests at different target levels is useful in understanding the variation in membrane properties between different axons within a nerve. Because of the threshold effects on nerve excitability and the possibility of increased variability between axons and altered electric recruitment order in disease conditions, excitability parameters measured only at the "standard" target level should be interpreted with caution, especially the responses to hyperpolarizing currents.

High Resolution Image Correspondences for Video Post-Production

We present an algorithm for estimating dense image correspondences. Our versatile approach lends itself to various tasks typical for video post-processing, including image morphing, optical flow estimation, stereo rectification, disparity/depth reconstruction, and baseline adjustment. We incorporate recent advances in feature matching, energy minimization, stereo vision, and data clustering into our approach. At the core of our correspondence estimation we use Efficient Belief Propagation for energy minimization. While state-of-the-art algorithms only work on thumbnail-sized images, our novel feature downsampling scheme in combination with a simple, yet efficient data term compression, can cope with high-resolution data. The incorporation of SIFT (Scale-Invariant Feature Transform) features into data term computation further resolves matching ambiguities, making long-range correspondence estimation possible. We detect occluded areas by evaluating the correspondence symmetry, we further apply Geodesic matting to automatically determine plausible values in these regions.

Charge transport through perylene bisimide molecular junctions: An electrochemical approach

Single molecular junction conductances of a family of five symmetric and two unsymmetric perylene tetracarboxylic bisimides (PBI) with variable bay-area substituents were studied employing a scanning tunneling microscope (STM)-based break junction technique. The stretching experiments provide clear evidence for the formation of single molecular junctions and π–π stacked dimers. Electrolyte gating demonstrates a distinct gating effect in symmetric molecular junctions, which strongly depends on molecular structure and properties of the solvent/electrolyte. Weak π–π-coupling in the unsymmetric dimers prevents rectification.

Digital Vertical Aerial Camera System for High-resolution Site Inspections in Conservation Easment Monitoring

A three-level satellite to ground monitoring scheme for conservation easement monitoring has been implemented in which high-resolution imagery serves as an intermediate step for inspecting high priority sites. A digital vertical aerial camera system was developed to fulfill the need for an economical source of imagery for this intermediate step. A method for attaching the camera system to small aircraft was designed, and the camera system was calibrated and tested. To ensure that the images obtained were of suitable quality for use in Level 2 inspections, rectified imagery was required to provide positional accuracy of 5 meters or less to be comparable to current commercially available high-resolution satellite imagery. Focal length calibration was performed to discover the infinity focal length at two lens settings (24mm and 35mm) with a precision of O.1mm. Known focal length is required for creation of navigation points representing locations to be photographed (waypoints). Photographing an object of known size at distances on a test range allowed estimates of focal lengths of 25.lmm and 35.4mm for the 24mm and 35mm lens settings, respectively. Constants required for distortion removal procedures were obtained using analytical plumb-line calibration procedures for both lens settings, with mild distortion at the 24mm setting and virtually no distortion found at the 35mm setting. The system was designed to operate in a series of stages: mission planning, mission execution, and post-mission processing. During mission planning, waypoints were created using custom tools in geographic information system (GIs) software. During mission execution, the camera is connected to a laptop computer with a global positioning system (GPS) receiver attached. Customized mobile GIs software accepts position information from the GPS receiver, provides information for navigation, and automatically triggers the camera upon reaching the desired location. Post-mission processing (rectification) of imagery for removal of lens distortion effects, correction of imagery for horizontal displacement due to terrain variations (relief displacement), and relating the images to ground coordinates were performed with no more than a second-order polynomial warping function. Accuracy testing was performed to verify the positional accuracy capabilities of the system in an ideal-case scenario as well as a real-world case. Using many welldistributed and highly accurate control points on flat terrain, the rectified images yielded median positional accuracy of 0.3 meters. Imagery captured over commercial forestland with varying terrain in eastern Maine, rectified to digital orthophoto quadrangles, yielded median positional accuracies of 2.3 meters with accuracies of 3.1 meters or better in 75 percent of measurements made. These accuracies were well within performance requirements. The images from the digital camera system are of high quality, displaying significant detail at common flying heights. At common flying heights the ground resolution of the camera system ranges between 0.07 meters and 0.67 meters per pixel, satisfying the requirement that imagery be of comparable resolution to current highresolution satellite imagery. Due to the high resolution of the imagery, the positional accuracy attainable, and the convenience with which it is operated, the digital aerial camera system developed is a potentially cost-effective solution for use in the intermediate step of a satellite to ground conservation easement monitoring scheme.

Las muchachas ahorrativas : El rol de las mujeres peronistas en el Plan Económico de Austeridad y el 2° Plan Quinquenal

En este trabajo propongo analizar el rol asignado a las mujeres peronistas y a las unidades básicas femeninas del Partido Peronista Femenino como promotoras del ahorro y la economía doméstica dentro del Plan Económico de Austeridad y el 2° Plan Quinquenal. Luego de la amplia confirmación de la popularidad del gobierno obtenida en las elecciones de noviembre de 1951, el presidente Perón consideró oportuno producir una rectificación y un ajuste en el rumbo de la política económica. Se trataba de una serie de medidas imprescindibles para superar una coyuntura que se tornaba crítica, y que se resumían en el aumento de la producción y la austeridad en el consumo. Esta última responsabilidad recayó en la mujeres - amas de casa amparadas en la acción de las unidades básicas femeninas que actuaron como consejeras y promotoras de los planes de austeridad implementando una serie de medidas que iban desde la cursos de cocina que enseñaban a cocinar con productos alternativos y más económicos hasta la fiscalización de los comercios que no cumplían con los precios máximos oficiales.

Las muchachas ahorrativas : El rol de las mujeres peronistas en el Plan Económico de Austeridad y el 2° Plan Quinquenal

En este trabajo propongo analizar el rol asignado a las mujeres peronistas y a las unidades básicas femeninas del Partido Peronista Femenino como promotoras del ahorro y la economía doméstica dentro del Plan Económico de Austeridad y el 2° Plan Quinquenal. Luego de la amplia confirmación de la popularidad del gobierno obtenida en las elecciones de noviembre de 1951, el presidente Perón consideró oportuno producir una rectificación y un ajuste en el rumbo de la política económica. Se trataba de una serie de medidas imprescindibles para superar una coyuntura que se tornaba crítica, y que se resumían en el aumento de la producción y la austeridad en el consumo. Esta última responsabilidad recayó en la mujeres - amas de casa amparadas en la acción de las unidades básicas femeninas que actuaron como consejeras y promotoras de los planes de austeridad implementando una serie de medidas que iban desde la cursos de cocina que enseñaban a cocinar con productos alternativos y más económicos hasta la fiscalización de los comercios que no cumplían con los precios máximos oficiales.

Las muchachas ahorrativas : El rol de las mujeres peronistas en el Plan Económico de Austeridad y el 2° Plan Quinquenal

En este trabajo propongo analizar el rol asignado a las mujeres peronistas y a las unidades básicas femeninas del Partido Peronista Femenino como promotoras del ahorro y la economía doméstica dentro del Plan Económico de Austeridad y el 2° Plan Quinquenal. Luego de la amplia confirmación de la popularidad del gobierno obtenida en las elecciones de noviembre de 1951, el presidente Perón consideró oportuno producir una rectificación y un ajuste en el rumbo de la política económica. Se trataba de una serie de medidas imprescindibles para superar una coyuntura que se tornaba crítica, y que se resumían en el aumento de la producción y la austeridad en el consumo. Esta última responsabilidad recayó en la mujeres - amas de casa amparadas en la acción de las unidades básicas femeninas que actuaron como consejeras y promotoras de los planes de austeridad implementando una serie de medidas que iban desde la cursos de cocina que enseñaban a cocinar con productos alternativos y más económicos hasta la fiscalización de los comercios que no cumplían con los precios máximos oficiales.

Orthophotokarte Vernagtferner 1979 in jpg-Format (54 MB)

For the production of the orthophoto map Vernagtferner 1979, scale I: 10000, photographs of the flight "Hintereisferner 1979" were used, which have been found to be very suitable for differential rectification. Control points were determined before the flight took place. The processing of nine stereopairs was carried out on an analytical plotter. Simultaneously with the on-line plotting of the contour lines the reference data for the computation of the profiles for the differential rectification were recorded. The orthophoto map was covered by four aerial photographs. A smooth data transfer was ensured because the same computer was used for the data acquisition and the differential rectification. Two printing originals were prepared, one for the outline drawings with contour lines and another for the orthophoto. The print was done in black for the two copies. The data acquisition, the computation of the scanning profiles for the othoprojector and the procedure of the differential rectification are described. The reason for the use of on-line drawn contour lines is explained. Further applications, also for digital contour lines, are introduced. Possibilities for the achievement of high photo quality during the reproduction are discussed.

InN/GaN heterojunction electrical behavior

Indium nitride (InN) has been the subject of intense research in recent years. Some of its most attractive features are its excellent transport properties such as its small band edge electron effective mass, high electron mobilities and peak drift velocities, and high frequency transient drift velocity oscillations [1]. These suggest enormous potential applications for InN in high frequency electronic devices. But to date the high unintentional bulk electron concentration (n~1018 cm-3) of undoped InN samples and the surface electron accumulation layer make it a hard task to create a reliable metalsemiconductor Schottky barrier. Some attempts have been made to overcome this problem by means of material oxidation [2] or deposition of insulators [3]. In this work we present a way to obtain an electrical rectification behaviour by means of heterojunction growth. Due to the big band gap differences among nitride semiconductors, it’s possible to create a structure with high band offsets. In InN/GaN heterojunctions, depending on the GaN doping, the magnitude of conduction and valence band offset are critical parameters which allow distinguishing among different electrical behaviours. The earliest estimate of the valence band offset at an InN–GaN heterojunction in a wurtzite structure was measured to be ~0.85 eV [4], while the Schottky barrier heights were determined to be ~ 1,4 eV [5].We grew In-face InN layer with varying thickness (between 150 nm and 1 mm) by plasma assisted molecular beam epitaxy (PA-MBE) on GaNntemplates (GaN/Al2O3), with temperatures ranging between 300°C and 450°C. The different doping in GaN template (Si doping, Fe doping and Mg doping) results in differences in band alignments of the two semiconductors changing electrical barriers for carriers and consequently electrical conduction behaviour. The processing of the devices includes metallization of the ohmic contacts on InN and GaN, for which we used Ti/Al/Ni/Au. Whereas an ohmic contact on InN is straightforward, the main issue was the fabrication of the contact on GaN due to the very low decomposition temperature of InN. A standard ohmic contact on GaN is generally obtained by high temperature rapid thermal annealing (RTA), typically done between 500ºC and 900ºC[6]. In this case, the limitation due to the presence of In-face InN imposes an upper limit on the temperature for the thermal annealing process and ohmic contact formation of about 450°C. We will present results on the morphology of the InN layers by X-Ray diffraction and SEM, and electrical measurements, in particular current-voltage and capacitance-voltage characteristics.

Treatment of imperfections in precast structural elements

The present work evaluates imperfections of precast concrete elements that do not meet the quality intended in design, gives rules and possible evaluation systems and offers recomendations for prevention, the effect the imperfections can have and actions for rectification. At last, the document should be read in conjunction with relevant codes and standards.

Antiguo Poblado de Algarrobito ubicado en el Valle del Elqui Chile, y su Patrón Urbano Bioclimático

La importancia de conocer bien el entorno para un proyecto arquitectónico es que podemos adaptarlo a nuestras necesidades fisiológicas de Confort Térmico. Podemos decir entonces que el edificio juega un papel fundamental como técnica de control de nuestro entorno. El edificio nos debería entregar un entorno controlado para que nos sintamos bien térmicamente, considerando además, que la arquitectura por sí misma puede lograr dicho confort la mayor parte de las veces. De no ser así, los usuarios tienden a colocar elementos mecánicos, para generar frío o calor artificialmente. Es fundamental entonces que nuestros edificios, tengan una correcta interacción con los recursos naturales del lugar para lograr dicho confort térmico. Pero lograr el Confort Térmico en todos los edificios de una ciudad como unidad, no logrará que la ciudad entera sea confortable térmicamente, ya que las complejas interacciones hacen que la problemática se deba enfrentar como algo sistémico. Esto quiere decir, que para que una ciudad o un conjunto logren la Confortabilidad Térmica deseada por sus habitantes debiera haber sido planificada conforme a variables urbanas que interactúen con el medio natural en forma eficiente. Con la observación de ciertos conjuntos habitacionales antiguos en el interior del Valle del Elqui, Chile y de sus relaciones entre variables urbanas y naturales, queda de manifiesto ciertas características que conllevan a pensar que existió una planificación ambiental en éstos que llevaron a lograr un conjunto con características bioclimáticas. Las evidencias de la existencia en primer lugar de un patrón urbanístico en dichos conjuntos habitacionales antiguos, hacen pensar que dicho patrón se trataría de un patrón bioclimático rural planificado, lo que hace que exista un gran interés por el estudio de estos conjuntos. Hasta ahora, en Chile, los pocos estudios de Confort Térmico que existen, están orientados a edificaciones aisladas, al Confort térmico interior de la edificación en el ámbito urbano, y en nada a Patrones Bioclimáticos de Conjuntos Habitacionales en una situación de ruralidad como a la referida en esta investigación. Además, los estudios referidos al clima urbano, difieren a los del clima rural, por lo que se necesitan mayores estudios aún para comprender mejor la problemática. Es por esto, que la mayoría de los casos mencionados en este estudio son contextualizados al ámbito urbano por carecer de otros estudios rurales. Es en este sentido que esta investigación cobra real importancia y pretende establecer la relación existente entre las variables morfológicas rurales y los recursos naturales del lugar y que generan un confort térmico ideal para sus habitantes, al mismo tiempo, se analiza la existencia de un Patrón Bioclimático en un poblado denominado Algarrobito ubicado en la cuenca del Valle del Elqui, Chile. Es en este sentido que el propósito principal de este trabajo es determinar la real existencia de un Patrón Bioclimático que relacione la morfología rural y edificada de los antiguos poblados pertenecientes a la cuenca del Valle de Elqui Chile con el microclima del lugar. La metodología empleada se basa en realizar primeramente el estudio del microclima del lugar a través de las Cartas Bioclimáticas. Para ello se obtuvo información de datos climatológicos de las estaciones meteorológicas ubicadas en la cuenca del Valle de Elqui, principalmente las más cercanas al lugar de estudio. Mediante una revisión exhaustiva de la información arquitectónica, así como de una labor de reconocimiento en terreno realizada en el poblado seleccionado y de la aplicación del Climograma local, se identificaron las diferentes zonas bioclimáticas del poblado antiguo y potenciales áreas de estudio en el conjunto. Esta actividad incluyó un estudio preliminar de la energía solar local, vientos, humedad, temperaturas y su interacción con el conjunto, permitiendo una primera aproximación a la problemática del espacio exterior y las viviendas. Esto permitió en base a las condicionantes del lugar, la arquitectura vernácula y los materiales descubrir un Patrón en el antiguo conjunto que permitía entregar confortabilidad térmica a sus habitantes y darse cuenta también, que el nuevo conjunto emplazado en el sector no seguía ese patrón con las disfuncionalidades que ello llevaba. Con esto quedó demostrado en primer lugar la existencia de un Patrón Bioclimático rural, los beneficios del patrón, la importancia de éste como causante de Confortabilidad Térmica del conjunto, y por ende de mejor eficiencia energética, así como también, que el nuevo conjunto no sigue para nada este Patrón, pero que existe también la posibilidad de rectificación y por supuesto, que los nuevos desarrollos residenciales del Valle del Elqui, puedan planificarse en base al patrón bioclimático descubierto. ABSTRACT Knowing the environment of an architectonic proyect is really important for adjusting it to our physiological needs of Thermal Comfort. So we can say that the building plays a key role as a technique of control of our environment. The building should give us a controlled environment to make us feel good thermally, and it usually can reach pleasurable temperatures by itself. If it isn't like that, people cooled or heated the ambience with mechanical elements. So a correct interaction between the buildings and natural resources is important to reach a thermal comfort. But achieving Thermal Comfort in all the buildings of a city as a unit will not achieve the whole city is thermally comfortable, because the complex interactions cause the problem needs to be solved as something systemic. This means that for a city or a set reach the Thermal Comfortability desired by its inhabitants, it should have been planned according to the urban variables that interact with the natural environment efficiently. Observing some old housing complexes in Elqui Valley, Chile, and the relationships between their natural and urban variables, some features lead to think that the environmental planning in these led to achieve a set with bioclimatic features. First, the evidences about the existence of an urban pattern in those old housing complexes, make thinking that the pattern would be a planned urban pattern, which generates interest in its study. In Chile, there have been few studies about Thermal Comfort, oriented to isolated buildings and indoor thermal comfort, but Bioclimatic Urban Patterns haven't been studied at all. In this sense, this investigation acquires a real importance and pretends to establish the relationship between urban variables and natural resources of the place that generates a good thermal comfort for its habitants. At the same time, the existence of a Bioclimatic Urban Pattern in Algarrobito, located in Elqui Valley basin, Chile, is analized. It is in this sense that the main purpose of this work is to determine the real existence of a Bioclimatic Urban Pattern, that links the urban and constructive form of the old villages of it with its microclimate. The methodology used is based on performing first the study of the microclimate of the place through the Bioclimatic Cards. To do this, weather stations, located in Elqui valley, near the place that was studied, were used to obtain information of climatological data. The different bioclimatic zones to the old town and potential areas of study in the set were identified, through an exhaustive review of the architectural information, a field reconnaissance work performed on the selected town and the application of the Local Climograph. This activity included a preliminary study of the local solar energy, the winds, the moisture, the temperatures, and their interaction with the set, allowing a first aproximation to troubles of outer space and housing. This allowed, based on the conditions of the place, vernacular architecture and materials, discovering an urban pattern in the old set, which allowed to give thermal comfort to its inhabitants and realize that the new set of the place did not follow this pattern, with the dysfunctions that it carried. These points demonstrated, in first place, the existence of a Bioclimatic Urban Pattern, the benefits of it, the importance of it as a cause of Thermal Comfortability, and therefore a better efficiency of energy, also that the new set doesn’t follow this Pattern at all, but that the posibility of rectification exists and, of course, that the new residencial development in Elqui Valley can be planned based on bioclimatic pattern discovered.

A Wireless Charging System Applying Phase-Shift and Amplitude Control to Maximize Efficiency and Extractable Power

Wireless power transfer (WPT) is an emerging technology with an increasing number of potential applications to transfer power from a transmitter to a mobile receiver over a relatively large air gap. However, its widespread application is hampered due to the relatively low efficiency of current Wireless power transfer (WPT) systems. This study presents a concept to maximize the efficiency as well as to increase the amount of extractable power of a WPT system operating in nonresonant operation. The proposed method is based on actively modifying the equivalent secondary-side load impedance by controlling the phase-shift of the active rectifier and its output voltage level. The presented hardware prototype represents a complete wireless charging system, including a dc-dc converter which is used to charge a battery at the output of the system. Experimental results are shown for the proposed concept in comparison to a conventional synchronous rectification approach. The presented optimization method clearly outperforms state-of-the-art solutions in terms of efficiency and extractable power.

An isoform of the rod photoreceptor cyclic nucleotide-gated channel β subunit expressed in olfactory neurons

Sensory transduction in olfactory neurons involves the activation of a cyclic nucleotide-gated (CNG) channel by cAMP. Previous studies identified a CNG channel α subunit (CNG2) and a β subunit (CNG5), which when heterologously expressed form a channel with properties similar but not identical to those of native olfactory neurons. We have cloned a new type of CNG channel β subunit (CNG4.3) from rat olfactory epithelium. CNG4.3 derives from the same gene as the rod photoreceptor β subunit (CNG4.1) but lacks the long, glutamic acid-rich domain found in the N terminus of CNG4.1. Northern blot and in situ hybridization revealed that CNG4.3 is expressed specifically in olfactory neurons. Expression of CNG4.3 in human embryonic kidney 293 cells did not lead to detectable currents. Coexpression of CNG4.3 with CNG2 induced a current with significantly increased sensitivity for cAMP whereas cGMP affinity was not altered. Additionally, CNG4.3 weakened the outward rectification of the current in the presence of extracellular Ca2+, decreased the relative permeability for Ca2+, and enhanced the sensitivity for l-cis diltiazem. Upon coexpression of CNG2, CNG4.3, and CNG5, a conductance with a cAMP sensitivity greater than that of either the CNG2/CNG4.3 or the CNG2/CNG5 channel and near that of native olfactory channel was observed. Our data suggest that CNG4.3 forms a subunit of the native olfactory CNG channel. The expression of various CNG4 isoforms in retina and olfactory epithelium indicates that the CNG4 subunit may be necessary for normal function of both photoreceptor and olfactory CNG channels.