Surface modification of bovine bone ash prepared by milling and acid washing process

Bovine bone ash is the main raw material for fabrication of bone china, a special kind of porcelain that has visual and mechanical advantages when compared to usual porcelains. The properties of bone china are highly dependent on the characteristics of the bone ash. However, despite a relatively common product, the science behind formulations and accepted fabrication procedures for bone china is not completely understood and deserves attention for future processing optimizations. In this paper, the influence of the preparation steps (firing, milling, and washing of the bones) on the physicochemical properties of bone ash particles was investigated. Bone powders heat-treated at temperatures varying from 700 to 1000 degrees C were washed and milled. The obtained materials were analyzed in terms of particle size distribution, chemical composition, density, specific surface area, FTIR spectroscopy, dynamic electrophoretic mobility, crystalline phases and scanning electron microscopy. The results indicated that bone ash does not significantly change in terms of chemistry and physical features at calcination temperatures above 700 degrees C. After washing in special conditions, one could only observe hydroxyapatite in the diffraction pattern. By FTIR it was observed that carbonate seems to be mainly concentrated on the surface of the powders. Since this compound can influence in the dispersion stability, and consequently in the quality of the final bone china product, and considering optimal washing parameters based on the dynamic electrophoretic mobility results, we describe a procedure for surface cleaning. (c) 2009 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

CALCINED SLUDGE SINTERING EVALUATION BY HEATING MICROSCOPY THERMAL ANALYSIS

Aiming the use of the sewage sludge produced in one of the largest Brazilian wastewater treatment stations as a raw material for the ceramic industry, the sintering process of the ashes produced from its calcination was evaluated by heating microscopy thermal analysis (HMTA). From the microprocessed images, a method was developed to obtain HMTA dimensional change curves as a function of temperature, equivalent to those usually obtained from dilatometers or by thermomechanical analysis (TMA). The final product after sintering at 1050 degrees C, characterized by X-ray fluorescence spectrometry, scanning electron microscopy and X-ray dispersive energy, indicates the presence of a vitreous phase containing phosphorus, which explains the good sintering properties of the studied calcined sludge, as shown from its HMTA dimensional change curve.

Traceability system in cod fishing

The objective of this research was to examine how various factors in Icelandic cod fishing can influence the quality of the raw material, using traceability systems to link these factors, and how transfer that knowledge and techniques to the Brazilian seafood industry. Data were collected in 2007 and analysed, to find a functional relationship between various quality factors. The analysis, showed, that there is a correlation between the number of parasites in the fillets and location of the fishing ground. It also showed that fishing ground and volume in haul can influence gaping, and that fillet yield differs between fishing grounds. These conclusions could only be drawn because of the ability to trace the fish from catch and all the way through processing. Recommendations drawn from this research to the Brazilian Competent Authority are to revise the countries fisheries legislation in order to enable the implementation of a traceability system that could be used as a tool to improve the quality of the raw material. (C) 2010 Elsevier Ltd. All rights reserved.

Use of Sugar Cane Vinasse to Mitigate Aluminum Toxicity to Saccharomyces cerevisiae

Owing to its toxicity, aluminum (Al), which is one of the most abundant metals, inhibits the productivity of many cultures and affects the microbial metabolism. The aim of this work was to investigate the capacity of sugar cane vinasse to mitigate the adverse effects of Al on cell growth, viability, and budding, as the likely result of possible chelating action. For this purpose, Fleischmann`s yeast (Saccharomyces cerevisiae) was used in growth tests performed in 125-mL Erlenmeyer flasks containing 30 mL of YED medium (5.0 g/L yeast extract plus 20 g/L glucose) supplemented with the selected amounts of either vinasse or Al in the form of AlCl(3) center dot A H(2)O. Without vinasse, the addition of increasing levels of Al up to 54 mg/L reduced the specific growth rate by 18%, whereas no significant reduction was observed in its presence. The toxic effect of Al on S. cerevisiae growth and the mitigating effect of sugar cane vinasse were quantified by the exponential model of Ciftci et al. (Biotechnol Bioeng 25:2007-2023, 1983). The cell viability decreased from 97.7% at the start to 84.0% at the end of runs without vinasse and to 92.3% with vinasse. On the other hand, the cell budding increased from 7.62% at the start to 8.84% at the end of runs without vinasse and to 17.8% with vinasse. These results demonstrate the ability of this raw material to stimulate cell growth and mitigate the toxic effect of Al.

Sweet Basil (Ocimum basilicum) Extracts Obtained by Supercritical Fluid Extraction (SFE): Global Yields, Chemical Composition, Antioxidant Activity, and Estimation of the Cost of Manufacturing

In this work, supercritical technology was used to obtain extracts from Ocimum basilicum (sweet basil) with CO(2) and the cosolvent H(2)O at 1, 10, and 20% (w/w). The raw material was obtained from hydroponic cultivation. The extract`s global yield isotherms, chemical compositions, antioxidant activity, and cost of manufacturing were determined. The extraction assays were done for pressures of 10 to 30 MPa at 303 to 323 K. The identification of the compounds present in the extracts was made by GC-MS and ESI-MS. The antioxidant activity of extracts was determined using the coupled reaction of beta-carotene and linolenic acid. At 1% of cosolvent, the largest global yield was obtained at 10 MPa and 303 K (2%, dry basis-d.b.); at 10% of cosolvent the largest global yield was obtained at 10 and 15 MPa (11%, d.b.), and at 20% of cosolvent the largest global yield was detected at 30 MPa and 303 K (24%, d.b.). The main components identified in the extracts were eugenol, germacrene-D, epi-alpha-cadinol, malic acid, tartaric acid, ramnose, caffeic acid, quinic acid, kaempferol, caffeoylquinic acid, and kaempferol 3-O-glucoside. Sweet basil extracts exhibited high antioxidant activity compared to beta-carotene. Three types of SFE extracts from sweet basil were produced, for which the estimated cost of manufacturing (class 5 type) varied from US$ 47.96 to US$ 1,049.58 per kilogram of dry extract.

Isoflavones and Antioxidant Capacity of Commercial Soy-Based Beverages: Effect of Storage

Samples of 11 different brands of commercially available soy-based beverages (n = 65), including products made from soy protein isolate (SPI) and soy milk, mixed with fruit juice and/or flavoring, were analyzed for their isoflavone content and in vitro antioxidant activity. There was a large variation in isoflavone and total phenolics contents ranging from 0.7 to 13 mg of isoflavones/200 mL and from 6 to 155 mg equivalents of catechin/200 mL, respectively. The antioxidant activity also varied significantly among products. Storage of the beverages at room temperature caused a significant decrease of antioxidant capacity, soluble phenolics, and isoflavone contents after 9 months. When soybeans used for beverage production were stored for up to 6 months in silos, the resulting products were not affected. However, a decrease of malonyl and a proportional increase of free glucosidic forms of isoflavones were observed after storage of both the raw material and the beverages.

Physical, physicochemical and chemical characterization of turf, sulphur mud and fango for cosmetic application

Focusing on the therapeutic and cosmetic potentials of the thermal water, several processes were developed to achieve a raw material known as fango which presents in its constitution water, clay and organic soil. This research work aimed at characterizing turf, sulphur mud and fango from Araxa, MG, Brazil, through physical, physicochemical, inorganic and organic assessments for cosmetic and topical product proposes. The characterization permitted the determination of relevant parameters to suggest the efficacy (presence, of ions) and safety (absence of toxic metals) of those raw materials for cosmetic and pharmaceutical utilization.

A survey on the sanitary condition of commercial foods of plant origin sold in Brazil

The objective of the study was to evaluate the hygienic conditions and practices of commercial foods of plant origin in establishments and street marketed by street vendors in cities in the State of Rio de Janeiro, Brazil. Forty different sales points were evaluated (establishments that prepared and sold fruit juices and street vendors that commercialized fresh coconut water, sugarcane juice and orange juice) using a questionnaire with 12 items, divided into three blocks (salesmen/handlers, operations, installations). The results indicated that the activities related to the commerce of fruit beverages in the cities of Sao Goncalo and Rio de Janeiro required the elaboration of a set of actions by the Sanitary Vigilance Agency in order to improve the hygienic and sanitary level and minimize health risk to consumers. Important requirements in the legislation relevant to this type of food are still not followed; adequate packaging and storage of the raw material, obtaining the raw material from registered suppliers, hygiene of the handlers and adequate management of wastes produced during the activities in question are amongst the main items deserving attention. (C) 2009 Elsevier Ltd. All rights reserved.

A Validated Reverse-phase HPLC Analytical Method for the Quantification of Phenolic Compounds in Baccharis dracunculifolia

Introduction - Baccharis dracunculifolia, which has great potential for the development of new phytotherapeutic medicines, is the most important botanical source of the southeastern Brazilian propolis, known as green propolis on account of its color. Objective - To develop a reliable reverse-phase HPLC chromatographic method for the analysis of phenolic compounds in both B. dracunculifolia raw material and its hydroalcoholic extracts. Methodology - The method utilised a C(18) CLC-ODS (M) (4.6 x 250 mm) column with nonlinear gradient elution and UV detection at 280 nm. A procedure for the extraction of phenolic compounds using aqueous ethanol 90%, with the addition of veratraldehyde as the internal standard, was developed allowing the quantification of 10 compounds: caffeic acid, coumaric acid, ferulic acid, cinnamic acid, aromadendrin-4`-methyl ether, isosakuranetin, drupanin, artepillin C, baccharin and 2,2-dimethyl-6-carboxyethenyl-2H-1-benzopyran acid. Results - The developed method gave a good detection response with linearity in the range 20.83-800 mu g/mL and recovery in the range 81.25-93.20%, allowing the quantification of the analysed standards. Conclusion - The method presented good results for the following parameters: selectivity, linearity, accuracy, precision, robustness, as well as limit of detection and limit of quantitation. Therefore, this method could be considered as an analytical tool for the quality control of B. dracunculifolia raw material and its products in both cosmetic and pharmaceutical companies. Copyright (C) 2008 John Wiley & Sons, Ltd.

Nuclear Quadrupole Resonance: A Technique to Control Hydration Processes in the Pharmaceutical Industry

Pharmaceuticals can exist in many solid forms, which can have different physical and chemical properties. These solid forms include polymorphs, solvates, amorphous, and hydrates. Particularly, hydration process can be quite common since pharmaceutical solids can be in contact with water during manufacturing process and can also be exposed to water during storage. In the present work, it is proved that NQR technique is capable of detecting different hydrated forms not only in the pure raw material but also in the final product (tablets), being in this way a useful technique for quality control. This technique was also used to study the dehydration process from pentahydrate to trihydrate.

CHARACTERIZATION OF AGROINDUSTRIAL SYSTEMS: A COMPARATIVE STUDY OF THE SUCRO-ENERGETIC SECTORS OF BRASIL AND COLOMBIA

Concern about the growing demand of food and fuel has focused the attention on countries with conditions to provide for global requirements. Also, the build-up of an environmental awareness has compelled several governments to implement programs for the addition of biofuels to oil derivatives. Considering their relevance as world and South American producers, this study makes a characterization of the sucro-energetic sectors of Brazil and Colombia, based on a view of agro-industrial systems, industrial organization and transaction cost economy. The approach followed considered of a secondary information survey and in-depth interviews. The main differences found are centered on institutional development level and production volumes. However, the use of the same raw material, sugarcane, trade opening policies, cultural approaches and regional integration, are factors that could generate links of commercial exchange and technological cooperation between the two countries.

Avaliação da qualidade do leite e caracterização de laticínios do estado do Espírito Santo

O leite é um alimento de grande importância na alimentação humana e amplamente consumido. Desta forma, justifica-se o estudo de suas características e a avaliação de procedimentos higiênicos durante toda a sua cadeia produtiva, desde a ordenha até o seu processamento. O objetivo do trabalho foi caracterizar laticínios localizados no estado do Espírito Santo, bem como avaliar as características de qualidade do leite cru e do leite pasteurizado de quatro estabelecimentos. O estudo foi dividido em quatro etapas: 1) seleção de dois laticínios com Selo de Inspeção Federal (SIF) e dois laticínios com Selo de Inspeção Estadual (SIE); 2) Elaboração de questionário para coleta de dados; 3) coleta de amostras de leite cru refrigerado e leite pasteurizado nos laticínios selecionados e avaliação da qualidade da matéria-prima e; 4) caracterização dos quatro laticínios e avaliação das condições higiênico-sanitárias dos estabelecimentos (aplicação questionário elaborado e da Lista de Verificação de Boas Práticas de Fabricação - check-list – presente na RDC nº 275 / 2002 da Anvisa).Os resultados obtidos com as análises de composição centesimal, acidez titulável, pH e Contagem de Células Somáticas (CCS) das amostras dos laticínios SIF 1, SIF 2, SIE 1 e SIE 2 indicaram conformidade com o padrão exigido pela Instrução Normativa nº 62/2011 do MAPA. Com relação ao teste do alizarol, todas as amostras analisadas apresentaram coloração parda avermelhada sem coagulação, indicando conformidade com a exigência da legislação. Para o teste de detecção de antibiótico da classe β-lactâmicos, todas as amostras de leite dos quatro laticínios analisadas nas três coletas tiveram ausência pelo método utilizado. Em uma das amostras coletadas da indústria SIF 1 foi verificada a presença da enzima fosfatase alcalina em leite pasteurizado, indicando que o tratamento térmico não foi adequado e que, portanto, poderia haver presença de microrganismos patogênicos na amostra, ou que a enzima se renaturou, apresentando um resultado falso positivo para o teste. Além disso, foi verificado que duas amostras de leite coletadas do laticínio SIE 1 apresentaram ausência da enzima lactoperoxidase,O leite é um alimento de grande importância na alimentação humana e amplamente consumido. Desta forma, justifica-se o estudo de suas características e a avaliação de procedimentos higiênicos durante toda a sua cadeia produtiva, desde a ordenha até o seu processamento. O objetivo do trabalho foi caracterizar laticínios localizados no estado do Espírito Santo, bem como avaliar as características de qualidade do leite cru e do leite pasteurizado de quatro estabelecimentos. O estudo foi dividido em quatro etapas: 1) seleção de dois laticínios com Selo de Inspeção Federal (SIF) e dois laticínios com Selo de Inspeção Estadual (SIE); 2) Elaboração de questionário para coleta de dados; 3) coleta de amostras de leite cru refrigerado e leite pasteurizado nos laticínios selecionados e avaliação da qualidade da matéria-prima e; 4) caracterização dos quatro laticínios e avaliação das condições higiênico-sanitárias dos estabelecimentos (aplicação questionário elaborado e da Lista de Verificação de Boas Práticas de Fabricação - check-list – presente na RDC nº 275 / 2002 da Anvisa).Os resultados obtidos com as análises de composição centesimal, acidez titulável, pH e Contagem de Células Somáticas (CCS) das amostras dos laticínios SIF 1, SIF 2, SIE 1 e SIE 2 indicaram conformidade com o padrão exigido pela Instrução Normativa nº 62/2011 do MAPA. Com relação ao teste do alizarol, todas as amostras analisadas apresentaram coloração parda avermelhada sem coagulação, indicando conformidade com a exigência da legislação. Para o teste de detecção de antibiótico da classe β-lactâmicos, todas as amostras de leite dos quatro laticínios analisadas nas três coletas tiveram ausência pelo método utilizado. Em uma das amostras coletadas da indústria SIF 1 foi verificada a presença da enzima fosfatase alcalina em leite pasteurizado, indicando que o tratamento térmico não foi adequado e que, portanto, poderia haver presença de microrganismos patogênicos na amostra, ou que a enzima se renaturou, apresentando um resultado falso positivo para o teste. Além disso, foi verificado que duas amostras de leite coletadas do laticínio SIE 1 apresentaram ausência da enzima lactoperoxidase,O leite é um alimento de grande importância na alimentação humana e amplamente consumido. Desta forma, justifica-se o estudo de suas características e a avaliação de procedimentos higiênicos durante toda a sua cadeia produtiva, desde a ordenha até o seu processamento. O objetivo do trabalho foi caracterizar laticínios localizados no estado do Espírito Santo, bem como avaliar as características de qualidade do leite cru e do leite pasteurizado de quatro estabelecimentos. O estudo foi dividido em quatro etapas: 1) seleção de dois laticínios com Selo de Inspeção Federal (SIF) e dois laticínios com Selo de Inspeção Estadual (SIE); 2) Elaboração de questionário para coleta de dados; 3) coleta de amostras de leite cru refrigerado e leite pasteurizado nos laticínios selecionados e avaliação da qualidade da matéria-prima e; 4) caracterização dos quatro laticínios e avaliação das condições higiênico-sanitárias dos estabelecimentos (aplicação questionário elaborado e da Lista de Verificação de Boas Práticas de Fabricação - check-list – presente na RDC nº 275 / 2002 da Anvisa).Os resultados obtidos com as análises de composição centesimal, acidez titulável, pH e Contagem de Células Somáticas (CCS) das amostras dos laticínios SIF 1, SIF 2, SIE 1 e SIE 2 indicaram conformidade com o padrão exigido pela Instrução Normativa nº 62/2011 do MAPA. Com relação ao teste do alizarol, todas as amostras analisadas apresentaram coloração parda avermelhada sem coagulação, indicando conformidade com a exigência da legislação. Para o teste de detecção de antibiótico da classe β-lactâmicos, todas as amostras de leite dos quatro laticínios analisadas nas três coletas tiveram ausência pelo método utilizado. Em uma das amostras coletadas da indústria SIF 1 foi verificada a presença da enzima fosfatase alcalina em leite pasteurizado, indicando que o tratamento térmico não foi adequado e que, portanto, poderia haver presença de microrganismos patogênicos na amostra, ou que a enzima se renaturou, apresentando um resultado falso positivo para o teste. Além disso, foi verificado que duas amostras de leite coletadas do laticínio SIE 1 apresentaram ausência da enzima lactoperoxidase,indicando a sua desnaturação devido à superpasteurização do leite. Para as análises microbiológicas de contagem bacteriana total e bactérias psicrotróficas, foi verificado uma contagem acima do estabelecido pela legislação. Além disso, os maiores valores médios de Contagem Bacteriana Total (CBT), contagem de microrganismos psicrotróficos e coliformes totais nas amostras de leite cru refrigerado foram verificados entre os laticínios com SIF, podendo ter como causa o uso de tanques comunitários pelos produtores, tempo de transporte para coleta de leite maior do que a média dos laticínios com SIE, a falta de adoção das Boas Práticas de Ordenha e o maior volume de leite coletado de diferentes produtores. Com relação à CBT e à contagem de coliformes totais em leite pasteurizado, os maiores valores médios foram verificados também nos laticínios SIF 1 e SIF 2. Os laticínios que apresentaram maior porcentagem de adequação aos requisitos das BPF foram os laticínios SIF 1 (87,82 %) e SIF 2 (80,66 %), os quais já possuíam os POP’s (Procedimento Operacional Padronizado), CIP (Controle Integrado de Pragas) e BPF (Boas Práticas de Fabricação) implantados ou em fase final de implantação. A análise dos resultados das análises microbiológicas, da aplicação do check-list e da aplicação do questionário permitiu a conclusão de que as empresas que possuíam SIF, apesar de apresentarem uma maior porcentagem de adequação aos requisitos de boas práticas de fabricação, possuíam uma qualidade da matéria-prima menor do que as indústrias com SIE. A partir dos resultados obtidos, pode-se concluir que o estudo de laticínios no estado do Espírito Santo possibilitou o conhecimento do setor e de seus problemas, contribuindo para o emprego de ações de melhoria e prevenção de futuros problemas.

Thermal and hydrolytic degradation of electrospun fish gelatin membranes

The thermal and hydrolytic degradation of electrospun gelatin membranes cross-linked with glutaraldehyde in vapor phase has been studied. In vitro degradation of gelatin membranes was evaluated in phosphate buffer saline solution at 37 ºC. After 15 days under these conditions, a weight loss of 68 % was observed, attributed to solvation and depolymerization of the main polymeric chains. Thermal degradation kinetics of the gelatin raw material and as-spun electrospun membranes showed that the electrospinning processing conditions do not influence polymer degradation. However, for cross-linked samples a decrease in the activation energy was observed, associated with the effect of glutaraldehyde cross-linking reaction in the inter- and intra-molecular hydrogen bonds of the protein. It is also shown that the electrospinning process does not affect the formation of the helical structure of gelatin chains.

The quest for a sustainable product: An environmental study of tyre recyclates

The main objective of the present study is to assess the environmental advantages of substituting aluminium for a polymer composite in the manufacture of a structural product (a frame to be used as a support for solar panels). The composite was made of polypropylene and a recycled tyres’ rubber granulate. Analysis of different composite formulations was performed, to assess the variation of the environmental impact with the percentage of rubber granulate incorporation. The results demonstrate that the decision on which of the two systems (aluminium or composite) has the best life cycle performance is strongly dependent on the End-of Life (EoL) stage of the composite frame. When the EoL is deposition in a landfill, the aluminium frame performs globally better than its composite counterpart. However, when it is incineration with energy recovery or recycling, the composite frame is environmentally preferable. The raw material production stage was found to be responsible for most of the impacts in the two frame systems. In that context, it was shown that various benefits can accrue in several environmental impact categories by recycling rubber tyres and using the resulting materials. This is in a significant part also due to the recycling of the steel in the tyres. The present work illustrates how it is possible to minimize the overall environmental impact of consumer products through the adequate selection of their constitutive materials in the design stage. Additionally it demonstrates how an adequate EoL planning can be an important issue when developing a sustainable product, since it can highly influence its overall life cycle performance.

Sugarcane productivity correlated with physical-chemical attributes to create soil management zone

The socioeconomic importance of sugar cane in Brazil is unquestionable because it is the raw material for the production of ethanol and sugar. The accurate spatial intervention in the management of the crop, resulting zones of soil management, increases productivity as well as its agricultural yields. The spatial and Person's correlations between sugarcane attributes and physico-chemical attributes of a Typic Tropustalf were studied in the growing season of 2009, in Suzanápolis, State of São Paulo, Brazil (20°28'10'' S lat.; 50°49'20'' W long.), in order to obtain the one that best correlates with agricultural productivity. Thus, the geostatistical grid with 120 sampling points was installed to soil and data collection in a plot of 14.6 ha with second crop sugarcane. Due to their substantial and excellent linear and spatial correlations with the productivity of the sugarcane, the population of plants and the organic matter content of the soil, by evidencing substantial correlations, linear and spatial, with the productivity of sugarcane, were indicators of management zones strongly attached to such productivity.