Estimates of global and regional potential health gains from reducing multiple major risk factors

Background Estimates of the disease burden due to multiple risk factors can show the potential gain from combined preventive measures. But few such investigations have been attempted, and none on a global scale. Our aim was to estimate the potential health benefits from removal of multiple major risk factors. Methods We assessed the burden of disease and injury attributable to the joint effects of 20 selected leading risk factors in 14 epidemiological subregions of the world. We estimated population attributable fractions, defined as the proportional reduction in disease or mortality that would occur if exposure to a risk factor were reduced to an alternative level, from data for risk factor prevalence and hazard size. For every disease, we estimated joint population attributable fractions, for multiple risk factors, by age and sex, from the direct contributions of individual risk factors. To obtain the direct hazards, we reviewed publications and re-analysed cohort data to account for that part of hazard that is mediated through other risks. Results Globally, an estimated 47% of premature deaths and 39% of total disease burden in 2000 resulted from the joint effects of the risk factors considered. These risks caused a substantial proportion of important diseases, including diarrhoea (92%-94%), lower respiratory infections (55-62%), lung cancer (72%), chronic obstructive pulmonary disease (60%), ischaemic heart disease (83-89%), and stroke (70-76%). Removal of these risks would have increased global healthy life expectancy by 9.3 years (17%) ranging from 4.4 years (6%) in the developed countries of the western Pacific to 16.1 years (43%) in parts of sub-Saharan Africa. Interpretation Removal of major risk factors would not only increase healthy life expectancy in every region, but also reduce some of the differences between regions, The potential for disease prevention and health gain from tackling major known risks simultaneously would be substantial.

Measuring the accumulated hazards of smoking: global and regional estimates for 2000

Objective: Current prevalence of smoking, even where data are available, is a poor proxy for cumulative hazards of smoking, which depend on several factors including the age at which smoking began, duration of smoking, number of cigarettes smoked per day, degree of inhalation, and cigarette characteristics such as tar and nicotine content or filter type. Methods: We extended the Peto-Lopez smoking impact ratio method to estimate accumulated hazards of smoking for different regions of the world. Lung cancer mortality data were obtained from the Global Burden of Disease mortality database. The American Cancer Society Cancer Prevention Study, phase 11 (CPS-II) with follow up for the years 1982 to 1988 was the reference population. For the global application of the method, never-smoker lung cancer mortality rates were chosen based on the estimated use of coal for household energy in each region. Results: Men in industrialised countries of Europe, North America, and the Western Pacific had the largest accumulated hazards of smoking. Young and middle age males in many regions of the developing world also had large smoking risks. The accumulated hazards of smoking for women were highest in North America followed by Europe. Conclusions: In the absence of detailed data on smoking prevalence and history, lung cancer mortality provides a robust indicator of the accumulated hazards of smoking. These hazards in developing countries are currently more concentrated among young and middle aged males.

Estimates of global mortality attributable to smoking in 2000

Background Smoking is a risk factor for several diseases and has been increasing in many developing countries. Our aim was to estimate global and regional mortality in 2000 caused by smoking, including an analysis of uncertainty. Methods Following the methods of Peto and colleagues, we used lung-cancer mortality as an indirect marker for accumulated smoking risk. Never-smoker lung-cancer mortality was estimated based on the household use of coal with poor ventilation. Relative risks were taken from the American Cancer Society Cancer Prevention Study, phase II, and the retrospective proportional mortality analysis of Liu and colleagues in China. Relative risks were corrected for confounding and extrapolation to other regions. Results We estimated that in 2000, 4.83 (uncertainty range 3.94-5.93) million premature deaths in the world were attributable to smoking; 2.41 (1.80-3.15) million in developing countries and 2.43 (2.13-2.78) million in industrialised countries. 3.84 million of these deaths were in men. The leading causes of death from smoking were cardiovascular diseases (1.69 million deaths), chronic obstructive pulmonary disease (0.97 million deaths), and lung cancer (0.85 million deaths). Interpretation Smoking was an important cause of global mortality in 2000. In view of the expected demographic and epidemiological transitions and current smoking patterns in the developing world, the health loss due to smoking will grow even larger unless effective interventions and policies that reduce smoking among men and prevent increases among women in developing countries are implemented.

Relationships and estimates of longitudinal growth stress in Eucalyptus dunnii at different ages

O objetivo desse trabalho foi obter estimativas da tensão de crescimento longitudinal em árvores vivas e verificar a sua relação com algumas características da madeira de Eucalyptus dunnii Maiden aos oito, treze, quinze e dezenove anos de idade. O material foi proveniente da Empresa Procopiak Compensados e Embalagens S.A., localizada no Município de Canoinhas, Santa Catarina. Os níveis de tensão longitudinal de crescimento foram mensurados indiretamente pelo método do "CIRAD-Forêt", na árvore viva, e estimados a partir do módulo de elasticidade dinâmico e do módulo de elasticidade obtido no ensaio de tração paralela à grã. A deformação residual longitudinal (DRL) e as estimativas das tensões de crescimento longitudinais apresentaram tendência de aumento, na média, com a idade do material. A DRL apresentou correlação, positiva e significativa, com todas as estimativas das tensões de crescimento longitudinais, sendo de maior magnitude aos 13, 15 e 19 anos de idade. A densidade básica apresentou maiores correlações, positivas e significativas, com o módulo de elasticidade dinâmico, estimado no sentido longitudinal, para a madeira na condição de saturação e a 12% de umidade, em todas as idades avaliadas. Todas as estimativas das tensões de crescimento longitudinais apresentam elevadas correlações, positivas e significativas, entre si.

Children visual screening protocol: validation by a focus group panel of experts

Screening programs, particularly the inclusion of specific orthoptic tests to detect visual abnormalities, varies among countries. This study aims to: 1) describes expert perception of issues related with children visual screening; 2) identify specific orthoptic tests to detect visual abnormalities in children visual screening.

Contextual determinants of induced abortion: a panel analysis

ABSTRACT OBJECTIVE Analyze the contextual and individual characteristics that explain the differences in the induced abortion rate, temporally and territorially. METHODS We conducted an econometric analysis with panel data of the influence of public investment in health and per capita income on induced abortion as well as a measurement of the effect of social and economic factors related to the labor market and reproduction: female employment, immigration, adolescent fertility and marriage rate. The empirical exercise was conducted with a sample of 22 countries in Europe for the 2001-2009 period. RESULTS The great territorial variability of induced abortion was the result of contextual and individual socioeconomic factors. Higher levels of national income and investments in public health reduce its incidence. The following sociodemographic characteristics were also significant regressors of induced abortion: female employment, civil status, migration, and adolescent fertility. CONCLUSIONS Induced abortion responds to sociodemographic patterns, in which the characteristics of each country are essential. The individual and contextual socioeconomic inequalities impact significantly on its incidence. Further research on the relationship between economic growth, labor market, institutions and social norms is required to better understand its transnational variability and to reduce its incidence.

Difficulties in access and estimates of public beds in intensive care units in the state of Rio de Janeiro

ABSTRACT OBJECTIVE To estimate the required number of public beds for adults in intensive care units in the state of Rio de Janeiro to meet the existing demand and compare results with recommendations by the Brazilian Ministry of Health. METHODS The study uses a hybrid model combining time series and queuing theory to predict the demand and estimate the number of required beds. Four patient flow scenarios were considered according to bed requests, percentage of abandonments and average length of stay in intensive care unit beds. The results were plotted against Ministry of Health parameters. Data were obtained from the State Regulation Center from 2010 to 2011. RESULTS There were 33,101 medical requests for 268 regulated intensive care unit beds in Rio de Janeiro. With an average length of stay in regulated ICUs of 11.3 days, there would be a need for 595 active beds to ensure system stability and 628 beds to ensure a maximum waiting time of six hours. Deducting current abandonment rates due to clinical improvement (25.8%), these figures fall to 441 and 417. With an average length of stay of 6.5 days, the number of required beds would be 342 and 366, respectively; deducting abandonment rates, 254 and 275. The Brazilian Ministry of Health establishes a parameter of 118 to 353 beds. Although the number of regulated beds is within the recommended range, an increase in beds of 122.0% is required to guarantee system stability and of 134.0% for a maximum waiting time of six hours. CONCLUSIONS Adequate bed estimation must consider reasons for limited timely access and patient flow management in a scenario that associates prioritization of requests with the lowest average length of stay.

2,4,6- Ttrichloroanisol:a consumer panel evaluation

“Cork taint” is a major problem in wine industry and is caused by contamination of wines. This contamination is usually attributed to wine cork stoppers and 2,4,6-trichloroanisole (2,4,6-TCA) is one of the compounds mostly associated to this off-flavour. In this work, a consumer panel performed “forced choice” triangular tests in order to measure Odour Detection Thresholds (ODT) and Taste Detection Thresholds (TDT) of 2,4,6-TCA in water, hydro-alcoholic solutions (11.5% and 18% ethanol) and white and red wines. A paired preference test was also performed by the panel in order to measure Odour Rejection Threshold (ORT) in white and red wine spiked with 2,4,6-TCA. Results obtained show that the ODT and the TDT for 2,4,6-TCA in water were 0.2 and 0.3 ng/L, respectively. In hydro-alcoholic solutions with 11.5% and 18% ethanol the ODT were 4 and 10 ng/L respectively. In red wine the ODT and the TDT were 0.9 and 1.7 ng/L and in white wine were 1.5 and 1.0 ng/L respectively. ORT for white was 10.4 ng/L and for red wines 16.0 ng/L. These results suggest that although this group of consumers detected very low concentrations of 2,4,6-TCA in wines, they did not reject the wine at these low concentration values.

Efeito da exposição às temperaturas extremas na população portuguesa - um contributo da epidemiologia

Backgroud: O International Panel on Climate Change prevê que o aumento da temperatura média global, até ao ano de 2100, varie entre 1,4 e 5,8ºC desconhecendo-se a evolução da adaptação da população a esta subida da temperatura. Em Portugal morre-se mais no Inverno que no Verão. Mas existem evidências de repercussões na mortalidade atribuíveis ao calor extremo. Este estudo procura conhecer os grupos etários e/ou populacionais que parecem revelar vulnerabilidade acrescida à exposição a temperaturas extremas e identificar indicadores de saúde apropriados para revelar esses mesmos efeitos. Métodos: Foram analisados dados de internamentos hospitalar e mortalidade por doenças cardiovasculares, respiratórias, renais, efeitos directos do frio e do calor, na população com 75 e mais anos de idade, nos distritos de Beja, Bragança e Faro, nos meses de Janeiro e Junho. Para os dados de morbilidade o período de análise foi 2002 a 2005 e para os de mortalidade de 2002 a 2004. Os dados meteorológicos analisados corresponderam aos valores da temperatura máxima e percentis da temperatura máxima, nos meses de Janeiro (P10) e Junho (P90). Os excessos de internamentos hospitalares, definidos como os dias em que ocorreram internamentos acima do valor da média mais 2 desvio padrão, foram relacionados com a distribuição das temperaturas extremas (frias abaixo do P10, quentes acima do P90.Os dias com óbitos acima do valor da média foram relacionados com a distribuição das temperaturas extremas (frias abaixo do P10, quentes acima do P90). Os indicadores propostos foram baseados em Odds Ratios e intervalos de confiança que sugeriam as estimativas mais precisas. Resultados: O grupo que revelou maior vulnerabilidade às temperaturas extremas foi o grupo dos 75 e mais anos, com doenças cardiovasculares quando exposto a temperaturas extremas, nos 3 distritos observados.O nº de dias de excesso de óbitos por doenças cardiovasculares relacionados com temperaturas extremas foi o mais elevado comparado com as restantes causas de morte. O grupo etário dos 75 e mais anos com de doenças respiratórias também é vulnerável, às temperaturas extremas frias, nos 3 distritos. Verificaram-se dias de excessos de internamentos hospitalares e óbitos por esta causa de morte, relacionados com a exposição às temperaturas extremas frias. Em Junho, não se verificou excesso de mortalidade associado à exposição a temperaturas extremas por esta causa, em qualquer dos distritos analisados. Apenas se verificou a associação entre os dias de ocorrência de internamentos hospitalares por doenças renais e o calor extremo, em Bragança. Conclusões: Foram encontradas associações estatísticas significativas entre dias de excesso de ocorrência de internamentos hospitalares ou óbitos por causa e exposição a temperaturas extremas frias e quentes possibilitando a identificação de um conjunto de indicadores de saúde ambiental apropriados para monitorizar a evolução dos padrões de morbilidade, mortalidade e susceptibilidade das populações ao longo do tempo.-------------------- Backgroud: International Panel on Climate Change estimates that the rise of mean global temperature varies between 1,4 e 5,8ºC until 2100, with unknowing evolution adaptation of populations. In Portugal we die more in Winter than in Summer time. But there are several evidences of mortality attributable to extreme eat. The proposal of this study is to know the age and/or populations groups that reveal more vulnerability to exposure to extreme temperature and identifying proper health indicators to reveal those effects. Methods: Data from hospital admissions and mortality caused by cardiovascular, respiratory, renal diseases and direct effects from direct exposure to extreme cold and heat, in population with 75 and more years, in Beja, Bragança and Faro districts, during January and June, were analysed. Analysis period for morbidity data was from 2002 to 2005 and form mortality was 2002 to 2004. Meteorological data analysed were maximum temperature and percentile of maximum temperature, from January (P10) and June (P90. Relationship between excess of hospital admission, defined as the days that occurred hospital admissions above mean value more 2 standards desviation and distribution of extreme temperatures were established (cold under P10 and heat above P90. Proposal indicators were based on Odds Ratios and confidence intervals, suggesting the most precises estimatives. Results: The most vulnerable group to extreme temperature were people with 75 or more years older with cardiovascular diseases, observed in the 3 districts. Number of days caused by excess cardiovascular mortality and extreme temperature were the most number of days between the other causes. The group with 75 or more years old with respiratory diseases is vulnerable too, especially to cold extreme temperature, in all the 3 districts. There were excess of days of hospital admissions and days with deaths, for this cause relating to extreme cold temperature. In June, does not funded excess of mortality associated to extreme temperature by this cause in any district of the in observation. Just was found relationship between days of hospital admissions caused by renal diseases in Bragança in days with extreme heat. Conclusions: Were found statistically significant associations between days of excess of hospital admissions or deaths and exposure to extreme cold and heat temperatures giving the possibility of identifying a core of environmental indicators proper to monitoring patterns and trends evolutions on morbidity, mortality and susceptibly of populations for a long time.

A PV panel simulator based on a two quadrant DC/DC power converter with a sliding mode controller

The use of a solar photovoltaic (PV) panel simulator can be a valued tool for the design and evaluation of the several components of a photovoltaic system. This simulator is based on power electronic converter controlled in such a way that will behave as a PV panel. Thus, in this paper a PV panel simulator based on a two quadrant DC/DC power converter is proposed. This topology will allow to achieve fast responses, like suddenly changes in the irradiation and temperature. To control the power converter it will be used a fast and robust sliding mode controller. Therefore, with the proposed system I-V curve simulation of a PV panel is obtained. Experimental results from a laboratory prototype are presented in order to confirm the theoretical operation.

SMART PANEL: medição, controlo e monitorização num clique

Na sociedade atual, a preocupação com o ambiente, por um lado, e com o conforto e a segurança, por outro, faz com que a sustentabilidade energética se assuma como uma forma de intervenção adequada às exigências de qualidade de vida e à eficiência no âmbito da economia. Nesta conformidade, é incontornável a mais-valia do Smart Panel, um quadro elétrico inteligente criado pela Schneider-Electric com vista à consecução daqueles desideratos. Iremos abordar, neste artigo, a gama de produtos que perfazem esta tecnologia, fazendo uma breve descrição de cada um deles, expondo de seguida um exemplo de aplicação desta tecnologia. Numa fase posterior apresentaremos as vantagens do Smart Panel face à tecnologia tradicional (até hoje a mais comum) no que respeita ao controlo de um quadro elétrico, Sistema de Gestão Técnica Centralizada.

Spectral and coherence estimates on electroencephalogram recordings during arithmetical tasks

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do Grau de Mestre em Engenharia Biomédica

Returns to vocational education in Portugal

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Economics from the NOVA – School of Business and Economics

A solution for estimates in software development projects

The Corporate world is becoming more and more competitive. This leads organisations to adapt to this reality, by adopting more efficient processes, which result in a decrease in cost as well as an increase of product quality. One of these processes consists in making proposals to clients, which necessarily include a cost estimation of the project. This estimation is the main focus of this project. In particular, one of the goals is to evaluate which estimation models fit the Altran Portugal software factory the most, the organization where the fieldwork of this thesis will be carried out. There is no broad agreement about which is the type of estimation model more suitable to be used in software projects. Concerning contexts where there is plenty of objective information available to be used as input to an estimation model, model-based methods usually yield better results than the expert judgment. However, what happens more frequently is not having this volume and quality of information, which has a negative impact in the model-based methods performance, favouring the usage of expert judgement. In practice, most organisations use expert judgment, making themselves dependent on the expert. A common problem found is that the performance of the expert’s estimation depends on his previous experience with identical projects. This means that when new types of projects arrive, the estimation will have an unpredictable accuracy. Moreover, different experts will make different estimates, based on their individual experience. As a result, the company will not directly attain a continuous growing knowledge about how the estimate should be carried. Estimation models depend on the input information collected from previous projects, the size of the project database and the resources available. Altran currently does not store the input information from previous projects in a systematic way. It has a small project database and a team of experts. Our work is targeted to companies that operate in similar contexts. We start by gathering information from the organisation in order to identify which estimation approaches can be applied considering the organization’s context. A gap analysis is used to understand what type of information the company would have to collect so that other approaches would become available. Based on our assessment, in our opinion, expert judgment is the most adequate approach for Altran Portugal, in the current context. We analysed past development and evolution projects from Altran Portugal and assessed their estimates. This resulted in the identification of common estimation deviations, errors, and patterns, which lead to the proposal of metrics to help estimators produce estimates leveraging past projects quantitative and qualitative information in a convenient way. This dissertation aims to contribute to more realistic estimates, by identifying shortcomings in the current estimation process and supporting the self-improvement of the process, by gathering as much relevant information as possible from each finished project.