Extruded colour-based plastic film for the measurement of dissolved CO2

Dissolved CO2 measurements are usually made using a Severinghaus electrode, which is bulky and can suffer from electrical interference. In contrast, optical sensors for gaseous CO2, whilst not suffering these problems, are mainly used for making gaseous (not dissolved) CO2 measurements, due to dye leaching and protonation, especially at high ionic strengths (>0.01 M) and acidity (<pH 4). This is usually prevented by coating the sensor with a gas-permeable, but ion-impermeable, membrane (GPM). Herein, we introduce a highly sensitive, colourimetric-based, plastic film sensor for the measurement of both gaseous and dissolved CO2, in which a pH-sensitive dye, thymol blue (TB) is coated onto particles of hydrophilic silica to create a CO2-sensitive, TB-based pigment, which is then extruded into low density polyethylene (LDPE) to create a GPM-free, i.e. naked, TB plastic sensor film for gaseous and dissolved CO2 measurements. When used for making dissolved CO2 measurements, the hydrophobic nature of the LDPE renders the film: (i) indifferent to ionic strength, (ii) highly resistant to acid attack and (iii) stable when stored under ambient (dark) conditions for >8 months, with no loss of colour or function. Here, the performance of the TB plastic film is primarily assessed as a dissolved CO2 sensor in highly saline (3.5 wt%) water. The TB film is blue in the absence of CO2 and yellow in its presence, exhibiting 50% transition in its colour at ca. 0.18% CO2. This new type of CO2 sensor has great potential in the monitoring of CO2 levels in the hydrosphere, as well as elsewhere, e.g. food packaging and possibly patient monitoring.

Investigation of properties affecting controlled release of macromolecules from PLGA microspheres

Poly(lactide-co-glycolide), or PLGA, microspheres offer a widely-studied biodegradable option for controlled release of therapeutics. An array of fabrication methodologies have been developed to produce these microspheres with the capacity to encapsulate therapeutics of various types; and produce microspheres of a wide range of sizes for different methods of delivery. The encapsulation, stability, and release profiles of therapeutic release based on physical and thermodynamic properties has also been studied and modeled to an extent. Much research has been devoted to tailoring formulations for improved therapeutic encapsulation and stability as well as selective release profiles. Despite the breadth of available research on PLGA microspheres, further analysis of fundamental principles regarding the microsphere degradation, formation, and therapeutic encapsulation is necessary. This work aims to examine additional fundamental principles related to PLGA microsphere formation and degradation from solvent-evaporation of preformed polymer. In particular, mapping the development of the acidic microenvironment inside the microsphere during degradation and erosion is discussed. Also, the effect of macromolecule size and conformation is examined with respect to microsphere diameter and PLGA molecular weight. Lastly, the effects of mechanical shearing and protein exposure to aqueous media during microsphere formation are examined. In an effort to better understand the acidic microenvironment development across the microsphere diameter, pH sensitive dye conjugated to protein that undergoes conformational change at different acidic pH values was encapsulated in PLGA microspheres of diameters ranging from 40 µm to 80 µm, and used in conjunction with fluorescence resonance energy transfer to measure the radial pH change in the microspheres. Qualitative analysis of confocal micrographs was used to correlate fluorescence intensity with pH value, and obtain the radial pH across the center of the microsphere. Therapeutic encapsulation and release from polymeric microspheres is governed by an interconnected variety of factors, including the therapeutic itself. The globular protein bovine serum albumin, and the elongated and significantly smaller enzyme, lysozyme, were encapsulated in PLGA microspheres ranging from 40 µm to 80 µm in diameter. The initial surface morphology upon microsphere formation, release profiles, and microsphere erosion characteristics were explored in an effort to better understand the effect of protein size, conformation, and known PLGA interaction on the formation and degradation of PLGA microspheres and macromolecule release, with respect to PLGA molecular weight and microsphere diameter. In addition to PLGA behavior and macromolecule behavior, the effect of mechanical stresses during fabrication was examined. Two similar solvent extraction techniques were compared for the fabrication of albumin loaded microspheres. In particular, the homogeneity of the microspheres as well as capacity to retain encapsulated albumin were compared. This preliminary study paves the way for a more rigorous treatment of the effect of mechanical forces present in popular microsphere fabrication. Several factors affecting protein release from PLGA microspheres are examined herein. The technique explored for spatial resolution of the pH inside the microsphere proved mildly effective in producing a reliable method of mapping microsphere pH changes. However, notable trends with respect to microsphere size, PLGA molecular weight, and microsphere porosity were observed. Proposed methods of improving spatial resolution of the acidic microenvironment are also provided. With respect to microsphere formation, studies showed that albumin and lysozyme had little effect on the internal homogeneity of the microsphere. Rather, ionic interactions with PLGA played a more significant role in the encapsulation and release of each macromolecule. Studies also showed that higher instances of mechanical stress led to less homogeneous microspheres with lower protein encapsulation. This suggests that perhaps instead of or in addition to modifying the microsphere formation formulation, the fabrication technique itself should be more closely considered in achieving homogeneous microspheres with desired loading.

Rapid and sensitive measurements of nitrate ester explosives using microchip electrophoresis with electrochemical detection

This article describes an effective microchip protocol based on electrophoretic-separation and electrochemical detection for highly sensitive and rapid measurements of nitrate ester explosives, including ethylene glycol dinitrate (EGDN), pentaerythritol tetranitrate (PETN), propylene glycol dinitrate (PGDN) and glyceryl trinitrate (nitroglycerin, NG). Factors influencing the separation and detection processes were examined and optimized. Under the optimal separation conditions obtained using a 15 mM borate buffer (pH 9.2) containing 20 mM SDS, and applying a separation voltage of 1500 V, the four nitrate ester explosives were separated within less than 3 min. The glassy-carbon amperometric detector (operated at -0.9 V vs. Ag/AgCl) offers convenient cathodic detection down to the picogram level, with detection limits of 0.5 ppm and 0.3 ppm for PGDN and for NG, respectively, along with good repeatability (RSD of 1.8-2.3%; n = 6) and linearity (over the 10-60 ppm range). Such effective microchip operation offers great promise for field screening of nitrate ester explosives and for supporting various counter-terrorism surveillance activities.

Sensitive bi-enzymatic biosensor based on polyphenoloxidases–gold nanoparticles–chitosan hybrid film–graphene doped carbon paste electrode for carbamates detection

A bi-enzymatic biosensor (LACC–TYR–AuNPs–CS/GPE) for carbamates was prepared in a single step by electrodeposition of a hybrid film onto a graphene doped carbon paste electrode (GPE). Graphene and the gold nanoparticles (AuNPs) were morphologically characterized by transmission electron microscopy, X-ray photoelectron spectroscopy, dynamic light scattering and laser Doppler velocimetry. The electrodeposited hybrid film was composed of laccase (LACC), tyrosinase (TYR) and AuNPs entrapped in a chitosan (CS) polymeric matrix. Experimental parameters, namely graphene redox state, AuNPs:CS ratio, enzymes concentration, pH and inhibition time were evaluated. LACC–TYR–AuNPs–CS/GPE exhibited an improved Michaelis–Menten kinetic constant (26.9 ± 0.5 M) when compared with LACC–AuNPs–CS/GPE (37.8 ± 0.2 M) and TYR–AuNPs–CS/GPE (52.3 ± 0.4 M). Using 4-aminophenol as substrate at pH 5.5, the device presented wide linear ranges, low detection limits (1.68×10− 9 ± 1.18×10− 10 – 2.15×10− 7 ± 3.41×10− 9 M), high accuracy, sensitivity (1.13×106 ± 8.11×104 – 2.19×108 ± 2.51×107 %inhibition M− 1), repeatability (1.2–5.8% RSD), reproducibility (3.2–6.5% RSD) and stability (ca. twenty days) to determine carbaryl, formetanate hydrochloride, propoxur and ziram in citrus fruits based on their inhibitory capacity on the polyphenoloxidases activity. Recoveries at two fortified levels ranged from 93.8 ± 0.3% (lemon) to 97.8 ± 0.3% (orange). Glucose, citric acid and ascorbic acid do not interfere significantly in the electroanalysis. The proposed electroanalytical procedure can be a promising tool for food safety control.

A molecularly imprinted sensor for sensitive detection of 8-hydroxy-2'-deoxyguanosine (8-OHdG) oxidative stress biomarker

6th Graduate Student Symposium on Molecular Imprinting

O2/CO2-sensitive cyclic AMP-signalling pathway in peripheral chemoreceptors

RESUMO: O corpo carotídeo (CB) é um pequeno órgão sensível a variações na PaO2, PaCO2 e pH. As células tipo I (células glómicas) do corpo carotídeo, as unidades sensoriais deste órgão, libertam neurotransmissores em resposta às variações dos gases arteriais. Estes neurotransmissores atuam quer em recetores pré-sinápticos, localizados nas células tipo I, quer em recetores póssinápticos, localizados nas terminações do nervo do seio carotídeo, ou em ambos. A activação dos recetores pré-sinápticos modula a atividade do corpo carotídeo, enquanto que, a activação dos recetores pós-sinápticos, de carater excitatório, desencadeia um aumento da frequência de descarga das fibras do CSN, com subsequente despolarização dos neurónios do gânglio petroso, e posterior despolarização de um grupo específico de neurónios do centro respiratório central, desencadeando, como resposta final, hiperventilação. Estes recetores pré- e pós-sinápticos podem ser classificados em ionotrópicos ou metabotrópicos, estando os últimos acoplados a adenilatos ciclases transmembranares (tmAC). O mecanismo exato pelo qual as variações dos gases arteriais são detetadas pelo CB não se encontra ainda completamente elucidado, mas tem sido sugerido que alterações nos níveis de cAMP estejam associadas ao mecanismo de deteção de variações de O2 e CO2. Os níveis de cAMP podem ser regulados através da sua via de síntese, mediada por dois tipos de adenilatos ciclases: tmAC sensível aos eurotransmissores e adenilato ciclase solúvel (sAC)sensível a variações de HCO3/CO2, e pela sua via de degradação mediada por fosfodiesterases. A via de degradação do cAMP pode ser manipulada farmacologicamente, funcionando enquanto alvo terapêutico para o tratamento de patologias do foro respiratório (e.g. asma, hipertensão pulmonar, doença pulmonar obstructiva crónica e apneia do sono), que induzem um aumento da actividade do CB.O trabalho descrito nesta dissertação partiu da hipótese de que a actividade do CB é manipulada por fármacos, que interferem com a via de sinalização do cAMP, tendo sido nosso objectivo geral, investigar o papel do cAMP na quimiotransdução do CB de rato, e determinar se a actividade dos enzimas responsáveis pela via de sinalização do cAMP é ou não regulada por variações de O2/CO2. Assim, a relevância deste trabalho é a de estudar e identificar possíveis alvos moleculares (sAC, isoformas de tmAC e PDE) com potencial para serem usados no tratamento de patologias relacionadas com o controlo respiratório. A primeira parte do presente trabalho, centrou-se na caracterização farmacológica da PDE4 no CB e em tecidos não quimiorecetores (e.g. gânglio cervical superior e artérias carótidas), e na observação do efeito de hipóxia aguda na acumulação dos níveis de cAMP, induzidos pelos inibidores de PDE, nestes tecidos. A quantificação de cAMP foi efectuada por técnica imunoenzimática (EIA), tendo sido elaboradas curvas de dose-resposta para os efeitos de inibidores, não específicos (IBMX) e específicos para a PDE2 e PDE4 (EHNA, Rolipram e Ro 20-1724), nos níveis de cAMP acumulados, em situações de normóxia (20%O2/5%CO2) e hipóxia (5%O2/5%CO2). A caracterização das PDE no gânglio cervical superior foi aprofundada, utilizando-se a técnica de transferência de energia de ressonância por fluorescência (FRET) em culturas primárias de neurónios, na presença de inibidores não específicos (IBMX) e específicos para a PDE3 e PDE4 (milrinone e rolipram, respetivamente). Foram igualmente estudadas, através de RT-qPCR, as alterações na expressão de PDE3A-B e PDE4A-D, no gânglio cervical superior, em resposta a diferentes percentagens de oxigénio. Na segunda parte do trabalho investigou-se a via de síntese do cAMP no CB em resposta a variações na concentração de HCO3/CO2. Em concreto, o protocolo experimental centrou-se na caracterização da sAC, dado que a sua actividade é regulada por variações de HCO3/CO2. A caracterização da expressão e regulação da sAC, em resposta a variações de HCO3/CO2 ,foi efectuada no CB e em tecidos não quimioreceptores periféricos (e.g. gânglio cervical superior, petroso e nodoso) por qRT-PCR. A actividade deste enzima foi caracterizada indirectamente através da quantificação dos níveis de cAMP (quantificação por EIA), induzidos por diferentes concentrações de HCO3/CO2, na presença de MDL-12,33-A, um inibidore da tmAC. A expressão das isoformas da tmAC no CB e gânglio petroso foi determinada por RT-qPCR. Adicionalmente, estudámos a contribuição relativa da tmAC e sAC no mecanismo de sensibilidade ao CO2 no CB. Para o efeito foram estudadas as alterações: 1) nos níveis de cAMP (quantificado por EIA) na presença de diferentes concentrações de HCO3/CO2 e ao longo do tempo (5-30 min); 2) na ativação da proteína cinase A (PKA, FRET baseado em sensores) em células tipo I do CB; e 3) na frequência de descarga do CSN (registos) na presença e ausência de ativadores e inibidores da sAC,tmAC e PKA. Por último, foi caracterizada a expressão e actividade da sAC nos quimioreceptors centrais (locus ceruleus, rafe e medula ventro-lateral) através de técnicas de RT-qPCR e EIA. A expressão das isoformas da tmAC foi aprofundada no locus coeruleus através de RT-qPCR. Por fim, comparámos a contribuição da tmAC e sAC nos níveis de cAMP no locus coeruleus em condições de normocapnia e hipercapnia.O nosso trabalho teve os seguintes resultados principais: 1) PDE4 está funcional no corpo carotídeo, artérias carótidas e gânglio cervical superior de rato, embora a PDE2 só se encontre funcional neste último; 2) Os efeitos dos inibidores de PDE nos níveis de acumulação de cAMP foram exacerbados em situações de hipóxia aguda no CB e artérias carótidas, mas foram atenuados no gânglio cervical superior; 3) No gânglio cervical superior, diferentes tipos de células apresentaram uma caracterização específica de PDEs, sugerindo uma subpopulação de células neste gânglio com funções fisiológicas distintas; 4) Embora todas as isoformas de PDE4 e PDE3 estivessem presentes no gânglio, a PDE3a, PDE4b e a PDE4d foram as isoformas mais expressas. Por outro lado, incubações de gânglio cervical superior, em diferentes percentagens de oxigénio, não alteraram (não regularam) significativamente a expressão das diferentes isoformas de PDE neste órgão; 5) a sAC encontra-se expressa e funcional no CB e nos quimiorecetores centrais estudados (locus coeruleus, rafe e medula ventrolateral). A sAC apresenta maior expressão no CB comparativamente aos restantes orgãos estudados, exceptuando os testículos, orgão controlo. Variações de HCO3/CO2 de 0/0 para 24/5 aumentaram os níveis de cAMP no CB e quimiorecetores centrais, tendo sido o aumento mais significativo observado no CB. Concentrações acima dos 24mM HCO3/5%CO2 não induziram alterações nos níveis de cAMP, sugerindo que a actividade da sAC se encontra saturada em condições fisiológicas (normocapnia) e que este enzima não desempenha qualquer papel na deteção de situações de hipercapnia; 6) No CB, a expressão das isoformas tmAC1, tmAC4, tmAC6 e tmAC9 é mais elevada comparativamente à expressão da sAC; 7) Utilizamos diferentes inibidores da tmAC (MDL 12-330A, 500μM, 2’5’-ddADO, 30-300μM, SQ 22536, 200μM) e da sAC (KH7, 10-100μM) para estudar a contribuição relativa destes enzimas na acumulação do cAMP no CB. Tanto a tmAC como a sAC contribuem para a acumulação dos níveis de cAMP em condições de hipercapnia. Contudo, existe um maior efeito destes inibidores nas condições de 12 mM HCO3/2.5%CO2 do que em condições de normocapnia e hipercapnia, sugerindo um papel relevante destes enzimas na atividade do CB em situações de hipocapnia; 8) Não se observaram variações nos níveis de cAMP em resposta a diferentes concentrações de HCO3/CO2 ao longo do tempo (5-30 min). O efeito inibitório induzido por ddADO e KH7 foi sobreponível após 5 ou 30 minutos de incubação em todas as concentrações de HCO3/CO2 estudadas; 9) Por último, verificou-se um aumento na frequência da descarga do nervo do seio carotídeo entre as condições de normocapnia e hipercapnia acídica. Ao contrário do KH7 (10μM), o 2’5’-ddADO reduziu significativamente a frequência de descarga do nervo, quer em condições de normocapnia quer de hipercapnia acídica. Contudo, não se verificou aumento na frequência de descarga do nervo entre normocapnia e hipercapnia isohídrica, sugerindo que a sensibilidade à hipercapnia no CB é mediada por variações de pH. Em conclusão, os resultados decorrentes deste trabalho permitiram demonstrar que, embora os enzimas que medeiam a via de sinalização do cAMP possam ser bons alvos terapêuticos em condições particulares, a sua actividade não é específica para o CB. Os resultados sugerem ainda que o cAMP não é um mediador específico da transdução à hipercapnia neste orgão. Contudo, os nossos resultados demonstraram que os níveis de cAMP são mais elevados em condições fisiológicas, o que sugere que o cAMP possa ter uma função homeostática neste orgão. Por último, o presente trabalho demonstrou que os aumentos de cAMP descritos por outros em condições de hipercapnia, não são observáveis quando o pH se encontra controlado. ------------------ ABSTRACT: The work presented in this dissertation was aimed to establish how specific is cAMP-signaling pathways in the CB mainly in different CO2 conditions and how O2 concentrations alter/drives the manipulation of cAMP signaling in the CB. The experimental studies included in this thesis sought to investigate the role of cAMP in the rat CB chemotransduction mechanisms and to determine whether the enzymes that participate in cAMP signal transduction in the CB are regulated by O2/CO2. We characterized the enzymes involved in the cAMP-signaling pathway in the CB (sAC, tmAC, PDE) under different O2/CO2 conditions. Our results demonstrated that many of these enzymes are involved in CO2/O2 sensing and while they may be useful in treating conditions with alterations in CO2/O2 sensing,they will not be specific to chemoreception within the CB: 1) PDE4 is ubiquitously expressed in CB and non-chemoreceptor related tissues and their affinity to inhibitors change with O2 tensions in both CB and carotid arteries, and 2) sAC and tmAC are expressed in peripheral and central chemo- and non-chemoreceptor tissues and their effect on cAMP levels do not change between normocapnic and isohydric hypercapnic conditions. Our results provide evidence against a specific role of cAMP as a mediator for O2 and CO2 chemotransduction in the rat CB and emphasized the role of pH in CO2 sensitivity of the CB. Furthermore, our results demonstrate that cAMP levels are maintained higher under physiological conditions, supporting recent finding from our lab, which all together suggests that cAMP has a homeostatic function in this organ.

Sensitive label-free electron chemical capacitive transducer signal for D-dimer electroanalyses

Supplementary data associated with this article can be found, in the online version, at: http://dx.doi.org/10.1016/j.electacta.2015.09.169.

Quantification of nicotine, cotinine, trans-3'-hydroxycotinine and varenicline in human plasma by a sensitive and specific UPLC-tandem mass-spectrometry procedure for a clinical study on smoking cessation.

A sensitive and specific ultra performance liquid chromatography-tandem mass spectrometry method for the simultaneous quantification of nicotine, its metabolites cotinine and trans-3'-hydroxycotinine and varenicline in human plasma was developed and validated. Sample preparation was realized by solid phase extraction of the target compounds and of the internal standards (nicotine-d4, cotinine-d3, trans-3'-hydroxycotinine-d3 and CP-533,633, a structural analog of varenicline) from 0.5mL of plasma, using a mixed-mode cation exchange support. Chromatographic separations were performed on a hydrophilic interaction liquid chromatography column (HILIC BEH 2.1×100mm, 1.7μm). A gradient program was used, with a 10mM ammonium formate buffer pH 3/acetonitrile mobile phase at a flow of 0.4mL/min. The compounds were detected on a triple quadrupole mass spectrometer, operated with an electrospray interface in positive ionization mode and quantification was performed using multiple reaction monitoring. Matrix effects were quantitatively evaluated with success, with coefficients of variation inferior to 8%. The procedure was fully validated according to Food and Drug Administration guidelines and to Société Française des Sciences et Techniques Pharmaceutiques. The concentration range was 2-500ng/mL for nicotine, 1-1000ng/mL for cotinine, 2-1000ng/mL for trans-3'-hydroxycotinine and 1-500ng/mL for varenicline, according to levels usually measured in plasma. Trueness (86.2-113.6%), repeatability (1.9-12.3%) and intermediate precision (4.4-15.9%) were found to be satisfactory, as well as stability in plasma. The procedure was successfully used to quantify nicotine, its metabolites and varenicline in more than 400 plasma samples from participants in a clinical study on smoking cessation.

Multi-analyte detection for biological fluids. Towards continous monitoring of glucose, ionized calcium and pH using a viscometric affinity biosensor.

We present a viscometric affinity biosensor that can potentially allow continuous multi-analyte monitoring in biological fluids like blood or plasma. The sensing principle is based on the detection of viscosity changes of a polymeric solution which has a selective affinity for the analyte of interest. The chemico-mechanical sensor incorporates an actuating piezoelectric diaphragm, a sensing piezoelectric diaphragm and a flow-resisting microchannel for viscosity detection. A free-standing Anodic Alumina Oxide (AAO) porous nano-membrane is used as selective interface. A glucose-sensitive sensor was fabricated and extensively assessed in buffer solution. The sensor reversibility, stability and sensitivity were excellent during at least 65 hours. Results showed also a good degree of stability for a long term measurement (25 days). The sensor behaviour was furthermore tested in fetal bovine serum (FBS). The obtained results for glucose sensing are very promising, indicating that the developed sensor is a candidate for continuous monitoring in biological fluids. Sensitive solutions for ionized calcium and pH are currently under development and should allow multi-analyte sensing in the near future.

Sensitive spectrophotometric determination of lansoprazole in pharmaceuticals using ceric ammonium sulphate based on redox and complex formation reactions

Two simple sensitive and cost-effective spectrophotometric methods are described for the determination of lansoprazole (LPZ) in bulk drug and in capsules using ceric ammonium sulphate (CAS), iron (II), orthophenanthroline and thiocyanate as reagents. In both methods, an acidic solution of lansoprazole is treated with a measured excess of CAS followed by the determination of unreacted oxidant by two procedures involving different reaction schemes. The first method involves the reduction of residual oxidant by a known amount of iron(II), and the unreacted iron(II) is complexed with orthophenanthroline at a raised pH, and the absorbance of the resulting complex measured at 510 nm (method A). In the second method, the unreacted CAS is reduced by excess of iron (II), and the resulting iron (III) is complexed with thiocyanate in the acid medium and the absorbance of the complex measured at 470 nm (method B). In both methods, the amount CAS reacted corresponds to the amount of LPZ. In method A, the absorbance is found to increase linearly with the concentration of LPZ where as in method B a linear decrease in absorbance occurs. The systems obey Beer's law for 2.5-30 and 2.5-25 µg mL-1 for method A and method B, respectively, and the corresponding molar absorptivity values are 8.1×10³ and 1.5×10(4) L mol-1cm-1 . The methods were successfully applied to the determination of LPZ in capsules and the results tallied well with the label claim. No interference was observed from the concomitant substances normally added to capsules.

Highly sensitive spectrophotometric methods for the determination of olanzapine

Highly sensitive and selective spectrophotometric methods (A and B) were developed for the determination of micro amounts of olanzapine (OLZ). Method A (direct method) is based on the oxidation of olanzapine with a known excess of iodine monochloride (ICl) in an acidic medium. Under the same condition, thymol blue was iodinated by unreacted ICl, and the absorbance of uniodinated thymol blue was measured at 536 nm. The decrease in ICl concentration is a measure of drug concentration. In method B (indirect method), oxidation of OLZ by a known excess of Ce(IV) in sulfuric acid medium followed by the reaction of unreacted Ce(IV) with leuco crystal violet (LCV) to crystal violet (CV), which is measured in an acetate buffer medium ( pH 4.9) at 580 nm. These methods obey the Beer's law in the concentration range of 0.2-1.6 µg mL-1 (method A) and 0.1-1.4 µg mL-1 (method B). The developed procedures have been successfully applied to the determination of OLZ in pure and in dosage forms. The results exhibit no interference from the presence of excipients. The reliability of the methods was established by parallel determination of OLZ against the reference method.

Sensitive spectrophotometric determination of lamotrigine in bulk drug and pharmaceutical formulations using bromocresol green

Two new, simple, rapid and reproducible spectrophotometric methods have been developed for the determination of lamotrigine (LMT) both in pure form and in its tablets. The first method (method A) is based on the formation of a colored ion-pair complex (1:1 drug/dye) of LMT with bromocresol green (BCG) at pH 5.02±0.01 and extraction of the complex into dichloromethane followed by the measurement of the yellow ion-pair complex at 410 nm. In the second (method B), the drug-dye ion-pair complex was dissolved in ethanolic potassium hydroxide and the resulting base form of the dye was measured at 620 nm. Beer's law was obeyed in the concentration range of 1.5-15 µg mL-1 and 0.5-5.0 µg mL-1 for method A and method B, respectively, and the corresponding molar absorptivity values are 1.6932 x 10(4) and 3.748 x 10(4) L mol-1cm-1. The Sandell sensitivity values are 0.0151 and 0.0068 µg cm-2 for method A and method B, respectively. The stoichiometry of the ion-pair complex formed between the dug and dye (1:1) was determined by Job's continuous variations method and the stability constant of the complex was also calculated. The proposed methods were applied successfully for the determination of drug in commercial tablets.

Catecholamine-induced vasoconstriction is sensitive to carbonic anhydrase I activation

We studied the relationship between alpha- and beta-adrenergic agonists and the activity of carbonic anhydrase I and II in erythrocyte, clinical and vessel studies. Kinetic studies were performed. Adrenergic agonists increased erythrocyte carbonic anhydrase as follows: adrenaline by 75%, noradrenaline by 68%, isoprenaline by 55%, and orciprenaline by 62%. The kinetic data indicated a non-competitive mechanism of action. In clinical studies carbonic anhydrase I from erythrocytes increased by 87% after noradrenaline administration, by 71% after orciprenaline and by 82% after isoprenaline. The increase in carbonic anhydrase I paralleled the increase in blood pressure. Similar results were obtained in vessel studies on piglet vascular smooth muscle. We believe that adrenergic agonists may have a dual mechanism of action: the first one consists of a catecholamine action on its receptor with the formation of a stimulus-receptor complex. The second mechanism proposed completes the first one. By this second component of the mechanism, the same stimulus directly acts on the carbonic anhydrase I isozyme (that might be functionally coupled with adrenergic receptors), so that its activation ensures an adequate pH for stimulus-receptor coupling for signal transduction into the cell, resulting in vasoconstriction.

Effect of pH, dextrose and yeast extract on cadmium toxicity on Saccharomyces cerevisiae PE-2

The aim of this study was to evaluate the effects of pH, dextrose and yeast extract on the cadmium toxicity on Saccharomyces cerevisiae PE-2. In the first assay, the YED mediums with different pH (2, 3, 4, 5, 6, 7, and 8) containing 0.0 and 0.05 mmol Cd L-1 were inoculated with yeast suspension and incubated at 30 °C for 18 hours. During the anaerobic growth, the biomass concentration was determined. The yeast trehalose content, cell viability, and the growth rate were assessed at the beginning and at the end of the growth stages. In the second assay the YED mediums were diluted to the total, ½, and ¼ content of dextrose and yeast and 0.0 and 0.05 mmol Cd L-1 were added. The pH of the mediums was adjusted to 5. The culture mediums were inoculated and incubated at 30 °C for 18 hours. The yeast growth was not affected by cadmium at high pH, but at low pH the yeast becomes more sensitive to the toxic effect. The yeast susceptibility to cadmium was enhanced by the decrease of yeast extract strength and the increase of dextrose strength.

A comparative study of the change in diatom inferred ph of a staircase of lakes in the Algoma District, Northern Ontario /

Four staircase lakes occupying a single watershed located in the Algoma District, north of Lake Superior were chosen for this study. I examined the subfossil diatom assemblage in the top twenty centimeters of the surface sediments in each of these four lakes in an attempt to reconstruct their respective past pH history. From these analyses it was possible to test the hypothesis that the rate of change of diatom inferred pH was not significantly different in lakes located one below the other in a single "staircase" within a single watershed system. My results indicated that the four Z lakes had been acid for at least the last century. The water color of the three upper Z lakes (Z1, Z2 and Z3) was brown (>30 Pt Co units). The bottom lake (Z4) was the only clear water lake in the system «5 Pt Co units). This bottom staircase lake had no muskeg development around its shoreline. The alkaliphilous diatoms in the Z watershed system were important in determining the diatom inferred pH of the four Z lakes. The centric diatoms were extremely rare in the clearwater bottom lake (Z4). The ecology of the Eupodiscales is perhaps important in the interpretation of sediment in the more acid environment. Lake Z4 was the only one that had a progressive as well as a significant decrease in its downcore diatom inferred pH since the early 1960's. This lead me to speculate that the humic substances present in the upper three brown water lakes (Z1, Z2 and Z3) were perhaps Important in buffering them against a further decrease in water pH even though they were located within an area which was sensitive to acid precipitation.