Erbium-activated silica-zirconia planar waveguides prepared by sol-gel route

Er(3+) doped (100-x)SiO(2)-xZrO(2) planar waveguides were prepared by the sol-gel route, with x ranging from 10 up to 30 mol%. Multilayer films doped with 0.3 mol% Er(3+) ions were deposited on fused quartz substrates by the dip-coating technique. The thickness and refractive index were measured by m-line spectroscopy at different wavelengths. The fabrication protocol was optimized in order to confine one propagating mode at 1.5 mu m. Photoluminescence in the near and visible region indicated a crystalline local environment for the Er(3+) ion. (c) 2007 Elsevier B.V. All rights reserved.

Sol-gel preparation of near-infrared broadband emitting Er(3+)-doped SiO(2)-Ta(2)O(5) nanocomposite films

This article reports a study on the preparation, densification process, and structural and optical properties of SiO(2)-Ta(2)O(5) nanocomposite films obtained by the sol-gel process. The films were doped with Er(3+) and the Si:Ta molar ratio was 90:10. Values of refractive index, thickness and vibrational modes in terms of the number of layers and thermal annealing time are described for the films. The densification process is accompanied by OH group elimination, increase in the refractive index, and changes in film thickness. Full densification of the film is acquired after 90 min of annealing at 900 degrees C. The onset of crystallization and devitrification, with the growth of Ta(2)O(5) nanocrystals occurs with film densification, evidenced by high-resolution transmission electron microscopy. The Er(3+)-doped nanocomposite annealed at 900 degrees C consists of Ta(2)O(5) nanoparticles, with sizes around 2 nm, dispersed in the SiO(2) amorphous phase. The main emission peak of the film is detected at around 1532 nm, which can be assigned to the (4)I(13/2)->(4)I(15/2) transition of the Er(3+) ions present in the nanocomposites. This band has a full width at half medium of 64 nm, and the lifetime measured for the (4)I(13/2) levels is 5.4 ms, which is broader compared to those of other silicate systems. In conclusion, the films obtained in this work are excellent candidates for use as active planar waveguide. (C) 2010 Elsevier B.V. All rights reserved.

Effect of mesoporosity of vanadium oxide prepared by sol-gel process as cathodic material evaluated by cyclability during Li(+) insertion/deinsertion

The effect of pore structure on the behavior of lithium intercalation into an electrode containing porous V(2)O(5) film has been investigated and compared with the electrode containing a non-porous V(2)O(5) film. X-ray diffraction patterns indicate a lamellar structure for both materials. Nitrogen adsorption isotherms, t-plot method, and Scanning Electronic Microscopy show that the route employed for the preparation of mesoporous V(2)O(5) was successful. The electrochemical performance of these matrices as lithium intercalation cathode materials was evaluated. The porous material reaches stability after several cycles more easily compared with the V(2)O(5) xerogel. Lithium intercalation into the porous V(2)O(5) film electrode is crucially influenced by pore surface and film surface irregularity, in contrast with the non-porous surface of the V(2)O(5) xerogel.

Characterization of pore structure and coordination of titanium in TiO2 and SiO2-TiO2 sol-pillared clays

Titania sol-pillared clay (TiO2 PILC) and silica-titania sol-pillared clay (SiO2-TiO2 PILC) were synthesized by the sol-gel method. Supercritical drying (SCD) and treatment with quaternary ammonium surfactants were used to tailor the pore structure of the resulting clay. It was found that SCD approach increased the external surface area of the PILCs dramatically and that treatment with surfactants could be used to tailor pore size because the mesopore formation in the galleries between the clay layers follows the templating mechanism as observed in the synthesis of MCM-41 materials. Highly mesoporous solids were thus obtained. In calcined TiO2 PILC, ultrafine crystallites in anatase phase, which are active for photocatalytic oxidation of organics, were observed. In SiO2-TiO2 PILCs and their derivatives, titanium was highly dispersed in the matrix of silica and no crystal phase was observed. The highly dispersed titanium sites are good catalytic centers for selective oxidation of organic compounds. (C) 2001 Academic Press.

Novel molecular sieve silica (MSS) membranes: characterisation and permeation of single-step and two-step sol-gel membranes

High quality MSS membranes were synthesised by a single-step and two-step catalysed hydrolyses employing tetraethylorthosilicate (TEOS), absolute ethanol (EtOH), I M nitric acid (HNO3) and distilled water (H2O). The Si-29 NMR results showed that the two-step xerogels consistently had more contribution of silanol groups (Q(3) and Q(2)) than the single-step xerogel. According to the fractal theory, high contribution of Q(2) and Q(3) species are responsible for the formation of weakly branched systems leading to low pore volume of microporous dimension. The transport of diffusing gases in these membranes is shown to be activated as the permeance increased with temperature. Albeit the permeance of He for both single-step and two-step membranes are very similar, the two-step membranes permselectivity (ideal separation factor) for He/CO2 (69-319) and He/CH4 (585-958) are one to two orders of magnitude higher than the single-step membranes results of 2-7 and 69, respectively. The two-step membranes have high activation energy for He and H-2 permeance, in excess of 16 kJ mol(-1). The mobility energy for He permeance is three to six-fold higher for the two-step than the single-step membranes. As the mobility energy is higher for small pores than large pores and coupled with the permselectivity results, the two-step catalysed hydrolysis sol-gel process resulted in the formation of pore sizes in the region of 3 Angstrom while the single-step process tended to produce slightly larger pores. (C) 2002 Elsevier Science B.V. All rights reserved.

Efeito da adição de extrato de casca de jabuticaba nas características físico-químicas e sensoriais de queijo petit suisse

A busca pela melhoria da qualidade de vida e a procura por alimentos naturais e funcionais são crescentes. A incorporação de prebióticos e corantes naturais pode agregar valor ao produto, por serem capazes de melhorar sua qualidade e por apresentarem grandes atrativos tecnológicos. Portanto, o objetivo deste trabalho foi avaliar o efeito da adição de prebióticos (inulina e oligofrutose) e corante natural (extrato de casca de jabuticaba) nas características de queijo petit suisse. Foi realizada análise da composição físico-química (extrato seco total, cinzas, proteínas, lipídeos, carboidratos e acidez titulável) logo após o processamento, análise do pH, colorimetria, teor de compostos bioativos e atividade antioxidante em diferentes tempos de armazenamento (0, 7, 14, 21 e 28 dias), análise do teor de fibras alimentares da formulação de queijo petit suisse com maior atividade antioxidante ao final da vida de prateleira e análises microbiológica e sensorial. O queijo petit suisse elaborado foi dividido em cinco formulações, de acordo com a concentração de corante natural incorporado, que foram 0%, 1,5%, 2,0%, 2,5% e 3,0%. Os dados obtidos com as análises realizadas logo após o processamento e análise sensorial foram submetidos à análise de variância e teste de Tukey, os dados obtidos com as análises realizadas em diferentes tempos de armazenamento foram submetidos à análise de variância e estudo do comportamento cinético, e a análise de fibras e microbiológica foi analisada por meio de estatística descritiva. Os valores de extrato seco total, proteínas, lipídeos, cinzas e carboidrato não diferiram significativamente (p>0,05) entre as formulações. A formulação sem adição de corante natural apresentou menor acidez (p≤0,05), e com o aumento da concentração de corante natural, maior foi a acidez do queijo. Os teores de antocianinas, fenólicos totais e capacidade antioxidante foram maiores com o aumento da concentração de corante incorporado, sendo que o teor de antocianinas reduziu com o decorrer do tempo de armazenamento. O valor encontrado de fibras para a formulação contendo 3,0% de corante natural foi baixo, e o produto não apresentou alegação de propriedade funcional. A fim de verificar se o queijo estava próprio para o consumo, foi realizada análise microbiológica para coliformes termotolerantes, estando todas as formulações de queijo petit suisse em condições sanitárias satisfatórias. A análise sensorial foi realizada em duas etapas. Na primeira etapa foi realizado teste de aceitação com avaliação dos atributos cor, sabor, consistência e impressão global, e intenção de compra para todas as formulações com incorporação de corante natural. Na segunda etapa foi realizado o teste de aceitação com informação nutricional do produto para a amostra mais aceita na primeira etapa. Como resultado, foi observado que o atributo cor foi o único que apresentou diferença significativa (p≤0,05) entre as formulações, sendo as mais aceitas com concentração 2,5% e 3,0%. De forma geral, todas as formulações foram bem aceitas, porém, a formulação com maior adição de corante natural foi a que xiii apresentou maiores notas. Assim, o queijo com maior concentração de corante natural foi o utilizado na segunda etapa sensorial, sendo observada influência das informações nos atributos cor e consistência (p≤0,05). Dessa forma, a utilização de prebióticos e corante natural de casca de jabuticaba em queijo petit suisse foi viável por não alterar a composição centesimal do produto, além de conferir ao produto uma coloração atrativa.

Análise de crescimento do amarílis cultivado a pleno sol

O cultivo de amarílis (Hippeastrum x hybridum Hort.) visa, principalmente, à produção e comercialização de bulbos para exportação. Informações sobre o seu ciclo de crescimento ainda são incongruentes. Assim, foi objetivo realizar medições que possam contribuir com estudos de análise de crescimento do amarílis var. Orange Souvereign, cultivado a pleno sol, nas condições encontradas em Santo Antônio de Posse, Estado de São Paulo. O delineamento experimental empregado foi o inteiramente casualizado. Utilizaram-se plantas cultivadas em uma área de 2 ha, onde os dados foram coletados mensalmente, durante 14 meses, de forma aleatória. Para cada uma das características analisadas foram utilizadas quatro repetições de 10 plantas. A área foliar determinada ao final do experimento foi de, em média, 3.102,65 cm², tendo em vista 10 folhas por planta. O diâmetro do bulbo aumentou, gradualmente, durante todo o período de produção, finalizando aos 420 dias após plantio, com 9,15 cm em média. A massa fresca total ao final do ciclo foi de, em média, 1.050,55 g, dos quais 39% (410 g) foram de massa fresca obtida pelo bulbo da forma como é comercializado (bulbo + raízes). Os índices fisiológicos da análise de crescimento (taxa de crescimento absoluto, taxa de crescimento relativo, taxa de assimilação líquida e razão de área foliar) demonstraram o comportamento da planta no campo, tendo o sistema assimilatório atingido bom desempenho nas condições de cultivo. O crescimento de amarílis foi considerado satisfatório do ponto de vista comercial.

Síntese sol-gel de biomateriais à base de água de fontes hidrotermais para otimização do comportamento celular e regeneração dos tecidos ósseos

Dissertação de Mestrado, Ciências Biomédicas, 18 de Março de 2016, Universidade dos Açores.

Évolution de la végétation et du climat pendant le miocène au Portugal

These work presents the quantitative and qualitative inventory and the stratigraphic distribution of fossil plants (spores, pollens, sterns, leaves and seeds) recognized the Miocene of the portuguese part of Tagus basin. For each lithostratigraphic unit, associations with ecological (paleoclimatic) meaning are defined. It was also possible to follow the evolution of the vegetation and the climate during the considered cronostratigraphic interval which includes most of the Miocene (Aquitanian to lower-middle Tortonian).

Télédetection en milieu périurbain. Détection et localisation du changement de l'occupation du sol par intégration des donnés-satellite SPOT HRV dans un système d'information géographique

Thèse pour obtenir le grade de DOCTEUR DE L' UNIVERSITÉ PARIS XII, Discipline: Urbanisme Aménagement

Caracterização de Cutinase imobilizada em matriz de sol-gel

Dissertação apresentada à Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Biotecnologia

Sol-gel-based biosensing applied to medicinal science

Biosensors have opened new horizons in biomedical analysis, by ensuring increased assay speed and flexibility, and allowing point-of-care applications, multi-target analyses, automation and reduced costs of testing. This has been a result of many studies merging nanotechnology with biochemistry over the years, thereby enabling the creation of more suitable environments to biological receptors and their substitution by synthetic analogue materials. Sol-gel chemistry, among other materials, is deeply involved in this process. Sol-gel processing allows the immobilization of organic molecules, biomacromolecules and cells maintaining their properties and activities, permitting their integration into different transduction devices, of electrochemical or optical nature, for single or multiple analyses. Sol-gel also allows to the production of synthetic materials mimicking the activity of natural receptors, while bringing advantages, mostly in terms of cost and stability. Moreover, the biocompatibility of sol-gel materials structures of biological nature allowed the use of these materials in emerging in vivo applications. In this chapter, biosensors for biomedical applications based on sol-gel derived composites are presented, compared and described, along with current emerging applications in vivo, concerning drug delivery or biomaterials. Sol-gel materials are shown as a promising tool for current, emerging and future medical applications. - See more at: http://www.eurekaselect.com/127191/article#sthash.iPqqyhox.dpuf

Sol-Gel Chemistry in Biosensing Devices of Electrical Transduction: Application to CEA Cancer Biomarker

Sol-gel chemistry allows the immobilization of organic molecules of biological origin on suibtable solid supports, permitting their integration into biosensing devices widening the possibility of local applications. The present work is an application of this principle, where the link between electrical receptor platform and the antibody acting as biorecognition element is made by sol-gel chemistry. The immunosensor design was targeted for carcinoembryonic antigen (CEA), an important biomarker for screening the colorectal cancer, by electrochemical techniques, namely electrochemical impedance spectroscopy (EIS) and square wave voltammetry (SVW). The device displayed linear behavior to CEA in EIS and in SWV assays ranging from 0.50 to 1.5ng/mL, and 0.25 to 1.5ng/mL, respectively. The corresponding detection limits were 0.42 and 0.043 ng/mL. Raman spectroscopy was used to characterize the surface modifications on the conductive platform (FTO glass). Overall, simple sol-gel chemistry was effective at the biosensing design and the presented approach can be a potential method for screening CEA in point-of-care, due to the simplicity of fabrication, short response time and low cost. - See more at: http://www.eurekaselect.com/127192/article#sthash.m1AWhINx.dpuf

Sol-gel biomimetic material designed to target CEA cancer biomarker

1st ASPIC International Congress