The Revised Transactional Model (RTM) of occupational stress and coping : an improved process approach

Despite more than three decades of research, there is a limited understanding of the transactional processes of appraisal, stress and coping. This has led to calls for more focused research on the entire process that underlies these variables. To date, there remains a paucity of such research. The present study examined Lazarus and Folkman’s (1984) transactional model of stress and coping. One hundred and twenty nine Australian participants with full time employment (i.e. nurses and administration employees) were recruited. There were 49 male (age mean = 34, SD = 10.51) and 80 female (age mean = 36, SD = 10.31) participants. The analysis of three path models indicated that in addition to the original paths, which were found in Lazarus and Folkman’s transactional model (primary appraisal-->secondary appraisal-->stress-->coping), there were also direct links between primary appraisal and stress level time one and between stress level time one to stress level time two. This study has provided additional insights into the transactional process which will extend our understanding of how individuals appraise, cope and experience occupational stress.

A national evaluation of the Australian Occupational Therapy Competency Standards (1994): a multistakeholder perspective

This paper summarises results from an evaluation of the adequacy and utility of the Australian Competency Standards for Entry-Level Occupational Therapists © (OT AUSTRALIA, 1994a). It comprised a two-part study, incorporating an online survey of key national stakeholders (n = 26), and 13 focus groups (n = 152) conducted throughout Australia with occupational therapy clinicians, academics, OT AUSTRALIA association and Occupational Therapy Registration Board representatives, as well as university program accreditors. The key recommendations were that: (i) urgent revision to reflect contemporary practice, paradigms, approaches and frameworks is required; (ii) the standards should exemplify basic competence at graduation (not within two years following); (iii) a revision cycle of five years is required; (iv) the Australian Qualifications Framework should be retained, preceded by an introduction describing the scope and nature of occupational therapy practice in the national context; (v) access to the standards should be free and unrestricted to occupational therapists, students and the public via the OT AUSTRALIA (national) website; (vi) the standards should incorporate a succinct executive summary and additional tools or templates formatted to enable occupational therapists to develop professional portfolios and create working documents specific to their workplace; and (vii) language must accommodate contextual variation while striking an appropriate balance between providing instruction and encouraging innovation in practice.

Do clients with acquired brain injury use the splints prescribed by occupational therapists? A descriptive study

Clients with acquired brain injury often demonstrate hypertonicity and decreased function in their upper limbs, requiring appropriate intervention. Splinting is one of the intervention methods that is widely used to address these issues. Literature shows that some clients are not using splints following fabrication. However, there is a paucity of research about the factors that influence clients to use or not use splints. This study aims to investigate these influential factors for clients with upper limb hypertonicity. Two survey tools including therapist and client questionnaires were developed and completed by both therapists and clients. Six therapists and 14 clients participated in this study and completed the relevant questionnaires. The results illustrate that most clients (13 out of 14) were continuing to use their splints four weeks following discharge from hospital. The main goals of choosing splints for both therapists and clients were prevention of contracture and deformity. The most indicated client reasons for adhering to the splint wearing program were therapist-related factors including clients’ trust and reliance on their therapists. Further reasons for clients implementing the recommended splint-wearing program and clinical implications are discussed.

Novel car carrier design : prevention of falls from heights

This article reports the details of a research on novel design in the field of semitrailer sector and discuss design by hazard prevention techniques. The novel design made addresses occupational health and safety (OHS)concerns of fall from heights. The research includes a detailed survey of national data sources to examine the fatalities caused due to fall from heights in car carriers. The study investigates OHS recommendations in Australia for semitrailer sector. Often injuries are caused due to drivers working above the 1.5 meter height for loading, unloading of the cars, moving the decks up, down, strapping the cars, and slipperly. The new design is developed using latest computer aided design and engineeing (CAD, CAE), product data management (PDM), virtual design process (VDP). The new car carrier design excels in reducing the risks of injuries to drivers and new bench mark for OHS standards. The new design has all the decks operated with hydraulics and uses unique ratchet lock mechanism (fool proof design) and loading happens at a safe working height (below 1.5 meter). All the cars are strapped on the safe working height, and then car desks operated hydraulically to transfer them to the required position. This also includes the car on the prime mover, which shuttles across from one deck to other using hydraulic and rack-pinion mechanisms. The novel design car carrier solves the problem of falls from height: next step would be to transfer this technology across other similar effected sectors.

Mental health outcomes for unemployed individuals who attend occupational skills / personal development training programs

Four studies report on outcomes for long-term unemployed individuals who attend occupational skills/personal development training courses in Australia. Levels of distress, depression, guilt, anger, helplessness, positive and negative affect, life satisfaction and self esteem were used as measures of well-being. Employment value, employment expectations and employment commitment were used as measures of work attitude. Social support, financial strain, and use of community resources were used as measures of life situation. Other variables investigated were causal attribution, unemployment blame, levels of coping, self efficacy, the personality variable of neuroticism, the psycho-social climate of the training course, and changes to occupational status. Training courses were (a) government funded occupational skills-based programs which included some components of personal development training, and (b) a specially developed course which focused exclusively on improving well-being, and which utilised the cognitive-behavioural therapy (CBT) approach. Data for all studies were collected longitudinally by having subjects complete questionnaires pre-course, post-course, and (for 3 of the 4 studies) at 3 months follow-up, in order to investigate long-term effects. One of the studies utilised the case-study methodology and was designed to be illustrative and assist in interpreting the quantitative data from the other 3 evaluations. The outcomes for participants were contrasted with control subjects who met the same sel~tion criteria for training. Results confirmed earlier findings that the experiences of unemployment were negative. Immediate effects of the courses were to improve well-being. Improvements were greater for those who attended courses with higher levels of personal development input, and the best results were obtained from the specially developed CBT program. Participants who had lower levels of well-being at the beginning of the courses did better as a result of training than those who were already functioning at higher levels. Course participants gained only marginal advantages over control subjects in relation to improving their occupational status. Many of the short term well-being gains made as a result of attending the courses were still evident at 3 months follow-up. Best results were achieved for the specially designed CBT program. Results were discussed in the context of prevailing theories of Ynemployment (Fryer, 1986,1988; Jahoda, 1981, 1982; Warr, 1987a, 1987b).

Biological monitoring of occupational exposure to polycyclic aromatic hydrocarbons in prebake smelting

In 1984, the International Agency for Research on Cancer determined that working in the primary aluminium production process was associated with exposure to certain polycyclic aromatic hydrocarbons (PAHs) that are probably carcinogenic to humans. Key sources of PAH exposure within the occupational environment of a prebake aluminium smelter are processes associated with use of coal-tar pitch. Despite the potential for exposure via inhalation, ingestion and dermal adsorption, to date occupational exposure limits exist only for airborne contaminants. This study, based at a prebake aluminium smelter in Queensland, Australia, compares exposures of workers who came in contact with PAHs from coal-tar pitch in the smelter’s anode plant (n = 69) and cell-reconstruction area (n = 28), and a non-production control group (n = 17). Literature relevant to PAH exposures in industry and methods of monitoring and assessing occupational hazards associated with these compounds are reviewed, and methods relevant to PAH exposure are discussed in the context of the study site. The study utilises air monitoring of PAHs to quantify exposure via the inhalation route and biological monitoring of 1-hydroxypyrene (1-OHP) in urine of workers to assess total body burden from all routes of entry. Exposures determined for similar exposure groups, sampled over three years, are compared with published occupational PAH exposure limits and/or guidelines. Results of paired personal air monitoring samples and samples collected for 1-OHP in urine monitoring do not correlate. Predictive ability of the benzene-soluble fraction (BSF) in personal air monitoring in relation to the 1-OHP levels in urine is poor (adjusted R2 < 1%) even after adjustment for potential confounders of smoking status and use of personal protective equipment. For static air BSF levels in the anode plant, the median was 0.023 mg/m3 (range 0.002–0.250), almost twice as high as in the cell-reconstruction area (median = 0.013 mg/m3, range 0.003–0.154). In contrast, median BSF personal exposure in the anode plant was 0.036 mg/m3 (range 0.003–0.563), significantly lower than the median measured in the reconstruction area (0.054 mg/m3, range 0.003–0.371) (p = 0.041). The observation that median 1-OHP levels in urine were significantly higher in the anode plant than in the reconstruction area (6.62 µmol/mol creatinine, range 0.09–33.44 and 0.17 µmol/mol creatinine, range 0.001–2.47, respectively) parallels the static air measurements of BSF rather than the personal air monitoring results (p < 0.001). Results of air measurements and biological monitoring show that tasks associated with paste mixing and anode forming in the forming area of the anode plant resulted in higher PAH exposure than tasks in the non-forming areas; median 1-OHP levels in urine from workers in the forming area (14.20 µmol/mol creatinine, range 2.02–33.44) were almost four times higher than those obtained from workers in the non-forming area (4.11 µmol/mol creatinine, range 0.09–26.99; p < 0.001). Results justify use of biological monitoring as an important adjunct to existing measures of PAH exposure in the aluminium industry. Although monitoring of 1-OHP in urine may not be an accurate measure of biological effect on an individual, it is a better indicator of total PAH exposure than BSF in air. In January 2005, interim study results prompted a plant management decision to modify control measures to reduce skin exposure. Comparison of 1-OHP in urine from workers pre- and post-modifications showed substantial downward trends. Exposure via the dermal route was identified as a contributor to overall dose. Reduction in 1-OHP urine concentrations achieved by reducing skin exposure demonstrate the importance of exposure via this alternative pathway. Finally, control measures are recommended to ameliorate risk associated with PAH exposure in the primary aluminium production process, and suggestions for future research include development of methods capable of more specifically monitoring carcinogenic constituents of PAH mixtures, such as benzo[a]pyrene.

Reliability prediction using the non-parametric explicit hazard model : a case study

Survival probability prediction using covariate-based hazard approach is a known statistical methodology in engineering asset health management. We have previously reported the semi-parametric Explicit Hazard Model (EHM) which incorporates three types of information: population characteristics; condition indicators; and operating environment indicators for hazard prediction. This model assumes the baseline hazard has the form of the Weibull distribution. To avoid this assumption, this paper presents the non-parametric EHM which is a distribution-free covariate-based hazard model. In this paper, an application of the non-parametric EHM is demonstrated via a case study. In this case study, survival probabilities of a set of resistance elements using the non-parametric EHM are compared with the Weibull proportional hazard model and traditional Weibull model. The results show that the non-parametric EHM can effectively predict asset life using the condition indicator, operating environment indicator, and failure history.

Nonprofit organizational and work unit identification and the occupational stress process

Research investigating the transactional approach to the work stressor-employee adjustment relationship has described many negative main effects between perceived stressors in the workplace and employee outcomes. A considerable amount of literature, theoretical and empirical, also describes potential moderators of this relationship. Organizational identification has been established as a significant predictor of employee job-related attitudes. To date, research has neglected investigation of the potential moderating effect of organizational identification in the work stressor-employee adjustment relationship. On the basis of identity, subjective fit and sense of belonging literature it was predicted that higher perceptions of identification at multiple levels of the organization would mitigate the negative effect of work stressors on employee adjustment. It was expected, further, that more proximal, lower order identifications would be more prevalent and potent as buffers of stressors on strain. Predictions were tested with an employee sample from five organizations (N = 267). Hierarchical moderated multiple regression analyses revealed some support for the stress-buffering effects of identification in the prediction of job satisfaction and organizational commitment, particularly for more proximal (i.e., work unit) identification. These positive stress-buffering effects, however, were present for low identifiers in some situations. The present study represents an extension of the application of organizational identity theory by identifying the effects of organizational and workgroup identification on employee outcomes in the nonprofit context. Our findings will contribute to a better understanding of the dynamics in nonprofit organizations and therefore contribute to the development of strategy and interventions to deal with identity-based issues in nonprofits.

The crash involvement of older drivers is associated with their hazard perception latencies

Hazard perception in driving is the one of the few driving-specific skills associated with crash involvement. However, this relationship has only been examined in studies where the majority of individuals were younger than 65. We present the first data revealing an association between hazard perception and self-reported crash involvement in drivers aged 65 and over. In a sample of 271 drivers, we found that individuals whose mean response time to traffic hazards was slower than 6.68 seconds (the ROC-curve derived pass mark for the test) were 2.32 times (95% CI 1.46, 3.22) more likely to have been involved in a self-reported crash within the previous five years than those with faster response times. This likelihood ratio became 2.37 (95% CI 1.49, 3.28) when driving exposure was controlled for. As a comparison, individuals who failed a test of useful field of view were 2.70 (95% CI 1.44, 4.44) times more likely to crash than those who passed. The hazard perception test and the useful field of view measure accounted for separate variance in crash involvement. These findings indicate that hazard perception testing and training could be potentially useful for road safety interventions for this age group.

Safety in occupational driving : development of a driver behaviour scale for the workplace context

International statistics indicate that occupational, or work-related driving, crashes are the most common cause of workplace injury, death, and absence from work. The majority of research examining unsafe driver behavior in the workplace has relied on general road safety questionnaires. However, past research has failed to consider the organizational context in the use of these questionnaires, and as such, there is ambiguity in the dimensions constituting occupational driving. Using a theoretical model developed by Hockey (1993, 1997), this article proposes and validates a new scale of occupational driver behavior. This scale incorporates four dimensions of driver behavior that are influenced by demanding workplace conditions; speeding, rule violation, inattention, and driving while tired. Following a content validation process, three samples of occupational drivers in Australia were used to assess the scale. Data from the first sample (n=145) were used to reduce the number of scale items and provide an assessment of the factorial validity of the scale. Data from the second sample (n=645) were then used to confirm the factor structure and psychometric properties of the scale including reliability and construct validity. Finally, data from the third sample (n=248) were used to establish criterion validity. The results indicated that the scale is a reliable and valid measure of occupational driver behavior.

The influence of safety ownership on occupational road safety outcomes

Questionnaires and interviews were conducted with employees and senior managers from three Australian organisations to explore the relationship between perceived managerial ownership of safety responsibilities and occupational road safety. It was found that the perceived authority of the person primarily responsible for managing road risks and perceived shared ownership of safety tasks were both significant independent predictors of safer driving behaviours. It was identified that the position of the person accepting primary risk management responsibilities was typically a member of the OHS team and typically in a management position. The extent that ownership was shared across members within the researched organisations varied, with personnel from OHS and fleet management typically accepting partial ownership of managing occupational road risks. Based on the findings, several recommendations are made to assist practitioners in managing occupational road risks.

The development and validation of two complementary measures of drivers' hazard perception ability

Hazard perception in driving involves a number of different processes. This paper reports the development of two measures designed to separate these processes. A Hazard Perception Test was developed to measure how quickly drivers could anticipate hazards overall, incorporating detection, trajectory prediction, and hazard classification judgements. A Hazard Change Detection Task was developed to measure how quickly drivers can detect a hazard in a static image regardless of whether they consider it hazardous or not. For the Hazard Perception Test, young novices were slower than mid-age experienced drivers, consistent with differences in crash risk, and test performance correlated with scores in pre-existing Hazard Perception Tests. For drivers aged 65 and over, scores on the Hazard Perception Test declined with age and correlated with both contrast sensitivity and a Useful Field of View measure. For the Hazard Change Detection Task, novices responded quicker than the experienced drivers, contrary to crash risk trends, and test performance did not correlate with measures of overall hazard perception. However for drivers aged 65 and over, test performance declined with age and correlated with both hazard perception and Useful Field of View. Overall we concluded that there was support for the validity of the Hazard Perception Test for all ages but the Hazard Change Detection Task might only be appropriate for use with older drivers.