Globally optimal on-line learning rules for multi-layer neural networks

We present a method for determining the globally optimal on-line learning rule for a soft committee machine under a statistical mechanics framework. This rule maximizes the total reduction in generalization error over the whole learning process. A simple example demonstrates that the locally optimal rule, which maximizes the rate of decrease in generalization error, may perform poorly in comparison.

Efficient THz radiation from a nanocrystalline silicon-based multi-layer photomixer

In this paper we propose a novel type of multiple-layer photomixer based on amorphous/nano-crystalline-Si. Such a device implies that it could be possible to enhance the conversion efficiency from optical power to THz emission by increasing the absorption length and by reducing the device overheating through the use of substrates with higher thermal conductivity compared to GaAs. Our calculations show that the output power from a two-layer Si-based photomixer is at least ten times higher than that from conventional LT-GaAs photomixers at 1 THz.

Physical characteristics of localized surface plasmons resulting from nano-scale structured multi-layer thin films deposited on D-shaped optical fiber

Novel surface plasmonic optical fiber sensors have been fabricated using multiple coatings deposited on a lapped section of a single mode fiber. UV laser irradiation processing with a phase mask produces a nano-scaled surface relief grating structure resembling nano-wires. The resulting individual corrugations produced by material compaction are approximately 20 μm long with an average width at half maximum of 100 nm and generate localized surface plasmons. Experimental data are presented that show changes in the spectral characteristics after UV processing, coupled with an overall increase in the sensitivity of the devices to surrounding refractive index. Evidence is presented that there is an optimum UV dosage (48 joules) over which no significant additional optical change is observed. The devices are characterized with regards to change in refractive index, where significantly high spectral sensitivities in the aqueous index regime are found, ranging up to 4000 nm/RIU for wavelength and 800 dB/RIU for intensity. © 2013 Optical Society of America.

On the k-anonymization of time-varying and multi-layer social graphs

The popularity of online social media platforms provides an unprecedented opportunity to study real-world complex networks of interactions. However, releasing this data to researchers and the public comes at the cost of potentially exposing private and sensitive user information. It has been shown that a naive anonymization of a network by removing the identity of the nodes is not sufficient to preserve users’ privacy. In order to deal with malicious attacks, k -anonymity solutions have been proposed to partially obfuscate topological information that can be used to infer nodes’ identity. In this paper, we study the problem of ensuring k anonymity in time-varying graphs, i.e., graphs with a structure that changes over time, and multi-layer graphs, i.e., graphs with multiple types of links. More specifically, we examine the case in which the attacker has access to the degree of the nodes. The goal is to generate a new graph where, given the degree of a node in each (temporal) layer of the graph, such a node remains indistinguishable from other k-1 nodes in the graph. In order to achieve this, we find the optimal partitioning of the graph nodes such that the cost of anonymizing the degree information within each group is minimum. We show that this reduces to a special case of a Generalized Assignment Problem, and we propose a simple yet effective algorithm to solve it. Finally, we introduce an iterated linear programming approach to enforce the realizability of the anonymized degree sequences. The efficacy of the method is assessed through an extensive set of experiments on synthetic and real-world graphs.

Personalized recommendation on multi-layer context graph

Recommender systems have been successfully dealing with the problem of information overload. A considerable amount of research has been conducted on recommender systems, but most existing approaches only focus on user and item dimensions and neglect any additional contextual information, such as time and location. In this paper, we propose a Multi-Layer Context Graph (MLCG) model which incorporates a variety of contextual information into a recommendation process and models the interactions between users and items for better recommendation. Moreover, we provide a new ranking algorithm based on Personalized PageRank for recommendation in MLCG, which captures users' preferences and current situations. The experiments on two real-world datasets demonstrate the effectiveness of our approach.

Multi-layer attribute selection and classification algorithm for the diagnosis of cardiac autonomic neuropathy based on HRV attributes

Cardiac autonomic neuropathy (CAN) poses an important clinical problem, which often remains undetected due difficulty of conducting the current tests and their lack of sensitivity. CAN has been associated with growth in the risk of unexpected death in cardiac patients with diabetes mellitus. Heart rate variability (HRV) attributes have been actively investigated, since they are important for diagnostics in diabetes, Parkinson's disease, cardiac and renal disease. Due to the adverse effects of CAN it is important to obtain a robust and highly accurate diagnostic tool for identification of early CAN, when treatment has the best outcome. Use of HRV attributes to enhance the effectiveness of diagnosis of CAN progression may provide such a tool. In the present paper we propose a new machine learning algorithm, the Multi-Layer Attribute Selection and Classification (MLASC), for the diagnosis of CAN progression based on HRV attributes. It incorporates our new automated attribute selection procedure, Double Wrapper Subset Evaluator with Particle Swarm Optimization (DWSE-PSO). We present the results of experiments, which compare MLASC with other simpler versions and counterpart methods. The experiments used our large and well-known diabetes complications database. The results of experiments demonstrate that MLASC has significantly outperformed other simpler techniques.

Reducing electrowetting-on-dielectric actuation voltage using a novel electrode shape and a multi-layer dielectric coating

This paper presents design and fabrication of an electrowetting-on-dielectric (EWOD) device using a novel electrode shape and a multi-layer dielectric coating that reduce the actuation voltage of the device to less than 12.6 V. The fabrication of the EWOD electrodes is carried out in several steps including laser exposure, wet developing, etching, and stripping. A high-dielectric-constant multi-layer dielectric coating containing a 770 nm thick Polyvinylidene difluoride (PVDF) layer and a 1 µm thick Cyanoethyl pullulan (CEP) layer, is deposited on the EWOD electrodes for insulation. This multi-layer dielectric structure exhibits a high capacitance per unit area, and the novel electrode shape changes the actuation force at the droplet contact line reducing the voltage required to operate the device. In addition, an overlaying Teflon layer of 50 nm is placed on top of the dielectric structure to provide a hydrophobic surface for droplet manipulation. It is observed from the experiments that the electrode shape and the dielectric structure have contributed to the reduction of the actuation voltage of the EWOD device.

Multi-task transfer learning for in hospital-death prediction for ICU patients

Multi-Task Transfer Learning (MTTL) is an efficient approach for learning from inter-related tasks with small sample size and imbalanced class distribution. Since the intensive care unit (ICU) data set (publicly available in Physionet) has subjects from four different ICU types, we hypothesizethat there is an underlying relatedness amongst various ICU types. Therefore, this study aims to explore MTTL model for in-hospital mortality prediction of ICU patients. We used singletask learning (STL) approach on the augmented data as well as individual ICU data and compared the performance with the proposed MTTL model. As a performance measurement metrics, we used sensitivity (Sens), positive predictivity (+Pred), and Score. MTTL with class balancing showed the best performance with score of 0.78, 0.73, o.52 and 0.63 for ICU type 1(Coronary care unit), 2 (Cardiac surgery unit), 3 (Medical ICU) and 4 (Surgical ICU) respectively. In contrast the maximum score obtained using STL approach was 0.40 for ICU type 1 & 2. These results indicates that the performance of in-hospital mortality can be improved using ICU type information and by balancing the ’non-survivor’ class. The findings of the study may be useful for quantifying the quality of ICU care, managing ICU resources and selecting appropriate interventions.

反射型磁光多层膜隔离器的频率响应及宽容性研究

通过传输矩阵法分析了材料介电常数的变化对于单缺陷结构的磁光多层膜隔离器性能的响，并提出了一种多缺陷结构的磁光多层膜结构．同单缺陷结构相比，多缺陷结构的旋转角的频谱响应带宽有很大增加，对于材料介电常数变化的宽容性得到了一个数量级的提高．同时这种多缺陷的结构对于膜层厚度的变化和入射角度也有很好的宽容性．