Characteristics of Arabian Sea mini warm pool and Indian summer monsoon

Arabian Sea Mini Warm Pool (ASMWP) is a part of the Indian Ocean Warm Pool and formed in the eastern Arabian Sea prior to the onset of the summer monsoon season. This warm pool attained its maximum intensity during the pre-monsoon season and dissipated with the commencement of summer monsoon. The main focus of the present work was on the triggering of the dissipation of this warm pool and its relation to the onset of summer monsoon over Kerala. This phenomenon was studied utilizing NCEP/NCAR (National Center for Environmental Prediction/National Center for Atmospheric and Research) re-analysis data, TRMM Micro wave Imager (TMI) and observational data. To define the ASMWP, sea surface temperature exceeding 30.25A degrees C was taken as the criteria. The warm pool attained its maximum dimension and intensity nearly 2 weeks prior to the onset of summer monsoon over Kerala. Interestingly, the warm pool started its dissipation immediately after attaining its maximum core temperature. This information can be included in the present numerical models to enhance the prediction capability. It was also found that the extent and intensity of the ASMWP varied depending on the type of monsoon i.e., excess, normal, and deficient monsoon. Maximum core temperature and wide coverage of the warm pool observed during the excess monsoon years compared to normal and deficient monsoon years. The study also revealed a strong relationship between the salinity in the eastern Arabian Sea and the nature of the monsoon.

QCD mini-jets contribution to the total cross-section for pions and protons and expectations at LHC

We describe our kt-resummation model for total cross-sections and show its application to pp and ¯pp scattering. The model uses mini-jets to drive the rise of the cross-section and soft gluon resummation in the infrared region to transform the violent rise of the mini-jet cross-section into a logarithmic behaviour in agreement with the Froissart bound.

Growth kinetics and immune response of chimeric foot-and-mouth disease virus serotype `O' produced through replication competent mini genome of serotype Asia 1, 63/72, in BHK cell lines

Regular vaccinations with potent vaccine, in endemic countries and vaccination to live in non-endemic countries are the methods available to control foot-and-mouth disease. Selection of candidate vaccine strain is not only cumbersome but the candidate should grow well for high potency vaccine preparation. Alternative strategy is to generate an infectious cDNA of a cell culture-adapted virus and use the replicon for development of tailor-made vaccines. We produced a chimeric `O' virus in the backbone of Asia 1 and studied its characteristics. The chimeric virus showed high infectivity titre (>10(10)) in BHK 21 cell lines, revealed small plague morphology and there was no cross reactivity with antiserum against Asia I. The virus multiplies rapidly and reaches peak at 12 h post infection. The vaccine prepared with this virus elicited high antibody titres.

Exploring Technology Evolution Using Patent Classification: A Case of Cochlear Implant Technology Patents

Understanding technology evolution through periodic landscaping is an important stage of strategic planning in R&D Management. In fields like that of healthcare, where the initial R&D investment is huge and good medical product serve patients better, these activities become crucial. Approximately five percentage of the world population has hearing disabilities. Current hearing aid products meet less than ten percent of the global needs. Patent data and classifications on cochlear implants from 1977-2010, show the landscapes and evolution in the area of such implant. We attempt to highlight emergence and disappearance of patent classes over period of time showing variations in cochlear implant technologies. A network analysis technique is used to explore and capture technology evolution in patent classes showing what emerged or disappeared over time. Dominant classes are identified. The sporadic influence of university research in cochlear implants is also discussed.

3D gravity, Chern-Simons and higher spins: A mini introduction

We give a review on (a) elements of (2 + 1)-dimensional gravity, (b) some aspects of its relation to Chern-Simons theory, (c) its generalization to couple higher spins, and (d) cosmic singularity resolution as an application in the context of flat space higher spin theory. A knowledge of the Einstein-Hilbert action, classical non-Abelian gauge theory and some (negotiable amount of) maturity are the only pre-requisites.

Stalking influenza by vaccination with pre-fusion headless HA mini-stem

Inaccuracies in prediction of circulating viral strain genotypes and the possibility of novel reassortants causing a pandemic outbreak necessitate the development of an anti-influenza vaccine with increased breadth of protection and potential for rapid production and deployment. The hemagglutinin (HA) stem is a promising target for universal influenza vaccine as stem-specific antibodies have the potential to be broadly cross-reactive towards different HA subtypes. Here, we report the design of a bacterially expressed polypeptide that mimics a H5 HA stem by protein minimization to focus the antibody response towards the HA stem. The HA mini-stem folds as a trimer mimicking the HA prefusion conformation. It is resistant to thermal/chemical stress, and it binds to conformation-specific, HA stem-directed broadly neutralizing antibodies with high affinity. Mice vaccinated with the group 1 HA mini-stems are protected from morbidity and mortality against lethal challenge by both group 1 (H5 and H1) and group 2 (H3) influenza viruses, the first report of cross-group protection. Passive transfer of immune serum demonstrates the protection is mediated by stem-specific antibodies. Furthermore, antibodies indudced by these HA stems have broad HA reactivity, yet they do not have antibody-dependent enhancement activity.

La erodabilidad de cuatro series de suelos determinada por el mini-simulador de lluvia y el nomograma de Wischmeier

Se realizó un estudio con el propósito de obtener información acerca de le Erodabilidad del suelo, así como distinguir un método confiable y sencillo pera la determinación de ésta. Se seleccionaron cuatro Series de suelos (San Ignacio, Nejapa, Esquipulas y Zambrano), ubicadas en le Cuenca Sur del Lago de Managua, en base a una recopilación de información existente (topografía, reconocimiento y caracterización del terreno), se procedió a obtener les pérdidas de suelo, escurrimiento superficial, concentración de sedimentos y el Índice de Erodabilidad de cada Serie de suelos, por medio de un Mini-simulador de lluvia de Erodabilidad por Kamphorst (1987). El factor de erodabilidad (K) se obtuvo a través de cuatro propiedades del suelo (textura, materia orgánica, estructura y permeabilidad), cuyos valores son introducidos en el Nomograma de Wischmeier (1971). Una vez obtenidos los Índices de erodabilidad (I.K.) y Factor de erodabilidad (K) se determinó que las cuatro Series muestran diferentes grados de susceptibilidad e le erosión. Además, las pérdidas de suelo, escurrimiento superficial, concentración de sedimentos, el índice de erodabilidad y el Factor de erodabilidad son influenciadas por la materia orgánica. Así también se comprobó que el comparar el Índice y el Factor de erodabilidad, tienen un alto valor de correlación. Se pudo observar que le textura no tiene una influencia directa sobre les pérdidas de suelo, escurrimiento superficial, Índice de erodabilidad y Factor de erodabilidad.

Evaluación de índices de erodabilidad a través de pérdidas de suelo, mediante un mini-simulador de lluvia

La erosión hídrica constituya una seria amenaza en muchas partes del mundo, y en Nicaragua constituye una de las causas principales de la desaparición de la capa más productiva de algunos suelos. Para la lucha contra la erosión hídrica, es preciso conocer los factores y las causas que provoquen. El presente estudio hace un enfoque en algunos factores que influyen sobre el escurrimiento superficial y las pérdidas de suelo. Para lo cual se utilizó una técnica relativamente nueva en Nicaragua, como es la simulación de lluvia, a través de un mini –simulador fabricado en Holanda por Kamphorrts (1987). La investigación fe desarrollada en dos etapas 1rº Etapa de laboratorio de Física de suelo, propiedad de ISCA. Se utilizaron como factores de variación a tres clases texturales de suelo, dos tipos de cobertura vegetal y dos grados de húmeda del suelo; para determinar por un lado ; índice de erodabilidad mediante la E:U:P:S: (Wischerier, 1987) y por otro lado evaluar la influencia de los factores mencionados anteriormente sobre el escurrimiento superficial, las pérdidas de suelo y la concentración de sedimentos. 2dº Etapa de campo: realizada en la finca “El plantel” propiedad del OISCA el factor de variación considerado fue la clase textural. Se determinaron índice de erodabilida de los suelos de estudio mediante la E: U:P:S: y se evaluó la influencia de la textura sobre el escurrimiento superficial, las pérdida de suelo y la concentración de sedimentos. El presente estudio revela que el mini –simulador de lluvia, puede ser utilizado para la determinación de índice de erodabilidad como un paramento indicador de cual suelo es más o manos susceptible a la erosión hídrica. Se recomienda dar seguimiento a esta investigación a con una serie de trabajos, que permitan llegar a otener, un gran número de suelos con sus índices de eroddabilidad respectivos, y que en un futuro, estos índices puedadn llegar a ser extrapolados para la determinación del factor erodabilidad del suelo (K).

The Foraging Ecology of the Mountain Long-Eared Bat Plecotus macrobullaris Revealed with DNA Mini-Barcodes

10 p.

Development of Mini Space Bioreactor System

微重力对空间细胞培养的影响规律一直是国际空间生物学的重点研究领域。而空间细胞培养技术和方法作为空间细胞生物学研究的基础，其概念性和原理性设计是正确区分重力对细胞的直接作用和间接作用的前提。另外，空间实验成本高昂，空间细胞培养装置的体积、重量、功耗是首要的制约因素。为保证充分物质交换，满足细胞代谢需求，同时尽可能降低由细胞供液形式产生的力学环境对细胞的影响，区分重力对细胞的直接作用和间接作用，我们研制了逆流片层式微型细胞培养装置。实验表明为使培养液流动对细胞生长影响最小，流动剪切应变率应小于1s-1。通过理论计算分析的逆流片层式微型细胞培养装培养室内流场及流动剪切范围表明，该装置可以满足要求。通过实验检测细胞培养时的氧耗、糖耗等，可以确定不同种类细胞的培养液流量范围。培养室内采用经表面改性的聚合物网架作为细胞载体，使得培养空间得到充分利用，并利于操作。从而为空间细胞培养研究提供了一种新的技术手段。

Complete agent based simulation of mini-grids

EuroPES 2009

Wireless parylene-based retinal implant

The degeneration of the outer retina usually causes blindness by affecting the photoreceptor cells. However, the ganglion cells, which consist of optic nerves, on the middle and inner retina layers are often intact. The retinal implant, which can partially restore vision by electrical stimulation, soon becomes a focus for research. Although many groups worldwide have spent a lot of effort on building devices for retinal implant, current state-of-the-art technologies still lack a reliable packaging scheme for devices with desirable high-density multi-channel features. Wireless flexible retinal implants have always been the ultimate goal for retinal prosthesis. In this dissertation, the reliable packaging scheme for a wireless flexible parylene-based retinal implants has been well developed. It can not only provide stable electrical and mechanical connections to the high-density multi-channel (1000+ channels on 5 mm × 5 mm chip area) IC chips, but also survive for more than 10 years in the human body with corrosive fluids.

The device is based on a parylene-metal-parylene sandwich structure. In which, the adhesion between the parylene layers and the metals embedded in the parylene layers have been studied. Integration technology for high-density multi-channel IC chips has also been addressed and tested with dummy and real 268-channel and 1024-channel retinal IC chips. In addition, different protection schemes have been tried in application to IC chips and discrete components to gain the longest lifetime. The effectiveness has been confirmed by the accelerated and active lifetime soaking test in saline solution. Surgical mockups have also been designed and successfully implanted inside dog's and pig's eyes. Additionally, the electrodes used to stimulate the ganglion cells have been modified to lower the interface impedance and shaped to better fit the retina. Finally, all the developed technologies have been applied on the final device with a dual-metal-layer structure.