The Influence of Cutting Speed and Cutting Initiation Location in Specimen Preparation for the Microtensile Bond Strength Test

Purpose: This study evaluated the effect of cutting initiation location and cutting speed on the bond strength between resin cement and feldspathic ceramic.Materials and Methods: Thirty-six blocks (6.4 x 6.4 x 4.8 mm) of ceramic (Vita VM7) were produced. The ceramic surfaces were etched with 10% hydrofluoric acid gel for 60 s and then silanized. Each ceramic block was placed in a silicon mold with the treated surface exposed. A resin cement (Variolink II) was injected into the mold over the treated surface and polymerized. The resin cement-ceramic blocks were divided into two groups according to experimental conditions: a) cutting initiation location - resin cement, ceramic and interface; and b) cutting speed - 10,000, 15,000, and 20,000 rpm. The blocks were sectioned to achieve non-trimmed bar specimens. The microtensile test was performed in a universal testing machine (1 mm/min). The failure modes were examined using an optical light microscope and SEM. Bond strength results were analyzed using one-way ANOVA and Tukey's test (alpha = 0.05).Results: Significant influences of cutting speed and initiation location on bond strength (p < 0.05) were observed. The highest mean was achieved for specimens cut at 15,000 rpm at the interface (15.12 +/- 5.36 MPa). The lowest means were obtained for specimens cut at the highest cutting speed in resin cement (8.50 +/- 3.27 MPa), and cut at the lowest cutting speed in ceramic (8.60 +/- 2.65MPa). All groups showed mainly mixed failure (75% to 100%).Conclusion: The cutting speed and initiation location are important factors that should be considered during specimen preparation for microtensile bond strength testing, as both may influence the bond strength results.

Mancha de mirotécio em algodoeiro causada por Myrothecium roridum

A mancha de mirotécio causada por Myrothecium roridum Tode ex Fr. foi observada em lavouras de algodão no sul do Maranhão, causando reduções de produtividade de até 60%. Os sintomas da doença são lesões necróticas, circulares, com estruturas salientes, os esporodóquios, de distribuição irregular. Foram observadas lesões nos pecíolos, brácteas, folhas e maçãs de algodoeiro cv. Deltapine Acala 90, Fibermax 966 e Sure Grow 821. O isolamento do fungo foi realizado em meio de cultura batata-dextrose-ágar (BDA). O teste de patogenicidade foi realizado em maçãs sadias, destacadas de algodoeiro cv. Fibermax 966, no estádio vegetativo R6, previamente desinfestadas. Foram testados 13 isolados de M. roridum, oito provenientes de algodão e cinco de soja. Avaliações das estruturas fúngicas foram realizadas com auxílio de microscópio óptico equipado com um micrômetro ocular. Os isolados causaram infecções em maçãs de algodão e destacou-se como mais agressivo o MA-75, proveniente de algodão, apresentando diâmetro médio de lesão de 1,3cm, aos sete DAI e 2,7cm aos 14 DAI. Todos os isolados formaram esporodóquios dispostos concenticamente em meio BDA. Os conídios são unicelulares, hialinos a oliváceos, abundantemente produzidos em massa verde-oliva a preta. Os conídios de isolados provenientes de algodão mediram, em média, 5,1µm x 1,5µm, e os obtidos de soja, 5,8µm x 1,5µm. Estes resultados relatam a ocorrência da mancha de mirotécio, causada por M. roridum, em lavouras comerciais de algodão no Brasil.

Alguns eventos morfológicos do processo de reparo de falha óssea diafisária no rádio esquerdo de ratos tratados com fenobarbital

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Aplicação da técnica de imunofluorescência direta para o diagnóstico da leishmaniose visceral canina em aspirado de linfonodo

Recentemente, foco de leishmaniose visceral canina (CVL) foi descrito na região noroeste do Estado de São Paulo - Brasil. O Hospital Veterinário - UNESP - Araçatuba, no ano de 2.000, desenvolveu 60 testes citopatológicos de casos suspeitos de leishmaniose usando aspirado por agulha fina (FNA). Os esfregaços de linfonodo foram corados pelo método de Romanowsky (Diff-Quik®) e observados em microscopia de luz. Os casos positivos mostraram formas amastigotas típicas de Leishmania livres ou em vacúolos de macrófagos. Sinais citopatológicos de reatividade do sistema linfo-histiocitário com ausência de parasitos foram também observados. Com o objetivo de implementar o diagnóstico da CVL, detectando parasitos e material antigênico nos esfregaços, aplicou-se a reação de imunofluorescência direta (IFD) usando anticorpo policlonal anti-Leishmania produzido em camundongo. Comparamos o método de IFD com a pesquisa direta do parasito em esfregaços corados pelo método de Romanowsky. Dos 60 cães com sinais clínicos da doença, o exame direto foi positivo em 50% (n=30), duvidoso em 36,7% (n=22) e negativo com reatividade do linfonodo em 13,3% (n=8). Quando os linfonodos foram submetidos a reação de IFD observamos reação positiva em 93,3% (n=56) e reação negativa em 6,7% (n=4). Nossos resultados mostraram que a reação de IFD apresentou alta sensibilidade quando comparada a pesquisa direta do parasito pela coloração de Romanowsky. A reação de IFD pode ser um método útil para confirmar os casos duvidosos da doença, onde as formas amastigotas não são identificadas com facilidade.

Efeitos da pentoxifilina sobre a viabilidade in vitro dos espermatozóides de eqüinos, após o resfriamento a 5ºC

O objetivo deste trabalho foi avaliar, in vitro, o efeito da adição de 1 mg pentoxifilina por mL de amostras seminais diluídas em meio Kenney, e resfriadas a 5º C, de garanhões normospérmicos, sobre os seguintes parâmetros: taxas de motilidade total e motilidade progressiva, velocidade espermática ao longo da trajetória real, índice retilíneo, taxa de linearidade, velocidade progressiva, taxa de viabilidade e taxa de integridade da membrana plasmática. Foram avaliados 20 ejaculados de quatro garanhões, com o auxílio do Hamilton Thorn Research (Animal Version 12.0 L, EUA), em câmara de Makler. A taxa de viabilidade foi realizada por coloração de eosina e microscopia de contraste e a taxa de integridade de membrana, por coloração com fluorocromos, iodeto de propídio e diacetato de carboxifluoresceina e microscopia de fluorescência. As análises foram realizadas aos 30, 60, e 120 minutos de incubação a 37º C, após 12, 24 e 48 horas de resfriamento a 5ºC. A pentoxifilina incrementou significativamente, em relação ao grupo controle, os parâmetros espermáticos relacionados à motilidade dos espermatozóides e de integridade da membrana plasmática, durante todo o período de incubação, da seguinte forma: taxa de motilidade total em 8,2%; motilidade progressiva em 4,7%; velocidade real em 23,1 mm/s; taxa de espermatozóides com velocidade rápida em 7,4%; taxa de viabilidade em 4,7%; e integridade da membrana plasmática em 3,5 % do tratado. Quanto aos parâmetros índice de retilinidade e linearidade, não foi observada diferença significativa entre os grupos. Os resultados obtidos nas condições deste experimento indicam que a adição de pentoxifilina ao ejaculado resfriado de garanhões, até 48 horas após o resfriamento, pode ser benéfica à qualidade dos espermatozóides para uso na inseminação artificial.

MULLER CELLS AND DIABETIC-RETINOPATHY

Muller cells provide nutrition for neural cells. We studied the structure and ultrastructure of Muller cells in the retina of thirty 3-month old Wistar rats; divided equally into 3 groups: normal rats, alloxan diabetic rats and treated alloxan diabetic rats. 1 and 12 months after induction of diabetes. We observed that the Muller cell nuclei under light microscope examination had hexagonal shape and higher density than the other nuclei. Differences between groups could be observed only by electron microscopy. In the diabetic rats, Muller cells presented dispersion of nuclear chromatin and electrondense nuclear granulations, with the presence of increased glycogen, dense bodies and lysosomes in the cytoplasm. The alterations were more frequent in the perivascular region and at 12 months. The treated diabetic rats exhibited some alterations we observed in diabetic rats. but these alterations were less intense. We conclude that, despite the treatment, the diabetic retinopathy continues to evolve.

Some structural and physicochemical characteristics of tuber and root starches

Starches from six different species (cassava, arrowroot, sweet potato, yam, canna and ginger) were isolated and some structural and physicochemical characteristics analysed and correlated. Phosphorous and amylose contents were determined using a colorimetric method and measuring iodine affinity, respectively. Molecular weight distributions of starches were analysed by Sepharose CL 2B. Granular shape and size distribution were performed using an image analyser system attached to a light microscope. Swelling power was determined at 60, 70, 80 and 90 degrees C. Pasting and thermal properties were measured using a rapid viscoanalyser, and a differential scanning calorimeter, respectively. Phosphorous content varied from 0.007 to 0.031% for cassava and canna starches, respectively. Yam, canna and ginger starches displayed higher amylose contents (32.6, 31.7 and 26.5%, respectively) than cassava, arrowroot and sweet potato starches (19.8, 20.8 and 22.6%, respectively). These last three starches displayed amylose molecules of higher molecular weight than those shown for yam, canna and ginger starches. Canna starch showed higher proportions of longer branch chains of amylopectin than others starches. The size and shape of granules were quite variable among all starches and the average size of granules varied from 13.9 to 42.3 mu m for sweet potato and canna, respectively. Swelling power, pasting, and thermal properties were affected by structural characteristics of the starches.

In Vitro Evaluation of ICDAS and Radiographic Examination of Occlusal Surfaces and Their Association With Treatment Decisions

This in vitro study evaluated the performance of visual (International Caries Detection and Assessment System [ICDAS]) and radiographic (bitewing [BW]) examinations for occlusal caries detection and their associations with treatment decision (TD). Permanent teeth (n=104) with occlusal surfaces varying from sound to cavitated were selected. Sites were identified from 10x occlusal surface photographs. Standardized bitewing (BW) radiographs were taken. Four dentists with at least five years of experience scored all teeth twice (one-week interval) for ICDAS (0-6), BW (0=sound, 1=caries restricted to enamel, 2=caries in outer third dentin, 3=caries in inner third dentin), and TD (0=no treatment, 1=sealant, 2=microabrasion and sealant, 3=round bur sealant, 4a=resin, 4b=amalgam). Histological validation was performed by observation under a light microscope, with lesions classified on a five-point scale. Intraexaminer and inter-examiner repeatability were assessed using two-way tables and intraclass correlation coefficients (ICCs). Comparisons between percentage correct, specificity, sensitivity, and area under the receiver-operating characteristic (ROC) curve were performed using bootstrap analyses. ICCs for intraexaminer and interexaminer repeatability indicated good repeatability for each examiner, ranging from 0.78 to 0.88, and among examiners, ranging from 0.74 to 0.81. Correlation between ICDAS and TD was 0.85 and between BW and TD was 0.78. Correlation between the methods and histological scores was moderate (0.63 for ICDAS and 0.61 for BW). The area under the ROC curve was significantly greater for ICDAS than for BW (p<0.0001). ICDAS had significantly lower specificity than BW did (p=0.0269, 79% vs 94%); however, sensitivity was much higher for ICDAS than for BW (p<0.0001, 83% vs 44%). Data from this investigation suggested that the visual examination (ICDAS) showed better performance than radiographic examination for occlusal caries detection. The ICDAS was strongly associated with TD. Although the correlation between the ICDAS and BW was lower, it is still valuable in the clinical decision-making process.

Comparison of subcutaneous connective tissue responses among three different formulations of gutta-percha used in thermatic techniques.

A study of the subcutaneous connective tissue response of 24 white rats to three different formulations of gutta-percha was undertaken. The prepared specimens were examined under the light microscope after intervals of 7, 21, 60 and 120 days. The results showed identical tissue responses after the initial period of 7 days. However, after 120 days the gutta-percha supplied with the Ultrafil system presented mature granulation tissue with neither oedema nor vascular congestion, in contrast to the responses observed with the McSpadden and Obtura formulations.

Müller cells and diabetic retinopathy.

Müller cells provide nutrition for neural cells. We studied the structure and ultrastructure of Müller cells in the retina of thirty 3-month old Wistar rats, divided equally into 3 groups: normal rats, alloxan diabetic rats and treated alloxan diabetic rats, 1 and 12 months after induction of diabetes. We observed that the Müller cell nuclei under light microscope examination had hexagonal shape and higher density than the other nuclei. Differences between groups could be observed only by electron microscopy. In the diabetic rats, Müller cells presented dispersion of nuclear chromatin and electrondense nuclear granulations, with the presence of increased glycogen, dense bodies and lysosomes in the cytoplasm. The alterations were more frequent in the perivascular region and at 12 months. The treated diabetic rats exhibited some alterations we observed in diabetic rats, but these alterations were less intense. We conclude that, despite the treatment, the diabetic retinopathy continues to evolve.

Ultrastructure of the gland responsible for the synthesis of an aggregation pheromone in Rhynchophorus palmarum (L.) (Coleoptera: Curculionidae)

The ultrastructure of the glands responsible for synthesizing the aggregation pheromone rhynchophorol in the beetle Rhynchophorus palmarum (L.) was studied. Glands from live beetles were removed and examined under a light microscope using semithin sections (∼1μm) and under a transmission electron microscope (TEM) using ultrathin sections (60 nm). The glands show an alveolar structure without a reservoir and the cells making up the gland are arranged in a typical acinus pattern. The existence of two types of cells with different electron densities, secretion canaliculi, numerous mitochondria and smooth endoplasmic reticulum in abundance were observed. These latter organelles are characteristic of cells which synthetize non-proteinaceous substances and are thus, likely candidates for the producion of rhynchophorol.

Cytologic analysis of alterations induced by smoking and by alcohol consumption

Objective: To analyze cytologically the buccal mucosa of smoking and nonsmoking volunteers to determine what cellular changes are induced by cigarettes and alcohol consumption. Study Design: In order to evaluate cellular changes induced by smoking and alcohol consumption, exfoliative cytology was used for the analysis of mucosal smears obtained from the buccal mucosa of 25 smokers and 25 nonsmokers. The number of cigarettes consumed, duration of smoking, presence or absence of alcohol ingestion, ingested alcohol dose and frequency of consumption, and most frequently used type of alcoholic beverage were determined using a questionnaire. Three smears from each individual stained by the Papanicolaou method were analyzed quantitatively and qualitatively under a light microscope by 2 experienced examiners in terms of inflammatory and dysplastic alterations and of the degree of epithelial maturation. Results: Although numerous alterations were observed in smokers they corresponded up to only Papanicolaou class II and were not significantly different from nonsmokers (Mann-Whitney and χ 2 tests, p < 0.05). A higher proportion of inflammatory cells (polymorphonuclear and mononuclear cells) were obtained from smokers as compared to nonsmokers, while the proportion of bacteria was similar in the 2 groups. Conclusion: The findings indicate that even after a short period of cigarette use and alcohol consumption, inflammatory alterations were detectable on exfoliative cytology of the buccal mucosa in a young group, demonstrating the usefulness of cytology for early detection in smokers. © The International Academy of Cytology.

Comparison of the biological behavior of wollastonite bioceramics prepared from synthetic and natural precursors

Wollastonite bioceramics prepared from synthetic and natural precursors were implanted in rats in bone and subcutaneous tissues. The implant sites were excised after 7, 30 and 120 days, fixed, dehydrated, embedded in paraffin wax for serial cutting and examined under transmitted light microscope. It was found a very similar behavior for both wollastonite bioceramics. They were biocompatible, bioactive and biodegradable when implanted in rat bone. The synthetic ceramic was more reabsorbable than the one from natural powder. When implanted in subcutaneous rat tissue, both materials elicited a mild initial inflammatory reaction that practically disappeared after 120 days. Both materials were encapsulated with a very thin fibrous capsule and slightly reabsorbed at their surfaces. None of the materials induced ectopic osteogenesis. According to the results, the studied materials seem to be able for manufacturing reabsorbable bone implants.

Organização celular dos testículos em Hylidae e leptodactylidae, no Pantanal (Estado do Mato Grosso do Sul, Brasil)

The objective of this work was to make a comparative analysis of germ cell organization at different stages of cellular differentiation in adult males of Dendropsophus nanus (Boulenger, 1889), Pseudis limellum (Cope, 1862), P. paradoxa (Linnaeus, 1758), and Scinax acuminatus (Cope, 1862), belonging to the family Hylidae; and Leptodactylus chaquensis (Cei, 1950) and L. podicipinus (Cope, 1862), belonging to the family Leptodactylidae, collected in the Pantanal and in Serra da Bodoquena, Mato Grosso do Sul State, Brazil. The testes were removed and fixed, dehydrated in a graded series of ethanol and embedded in methacrylate glycol resin (Historesin Leica®). The sections were stained by 1% toluidine blue and observed under light microscope. It was detected that all individual of the Hylidae family show, throughout the year, the presence of all germ cell types of spermatogenesis. However, all Leptodactylidae family individuals only show the presence of all germ cell types during the rainy season. The variations of characteristics in seminiferous epithelium organization, as well as the evident difference in the amount of spermatozoa inside the tubules, are evidence that the anurans in this work show different forms of spermatogenesis development throughout the year: the cycle is continuous for the Hylidae family, and discontinuous with explosive release of spermatozoa for the Leptodactylidae family.

Correlation between hybrid layer thickness, resin tag length and microtensile bond strength of a self-etching adhesive system

The purpose of this study was to evaluate the correlation between the hybrid layer thickness, resin tag length and resin bond strength of a self-etching adhesive system to sound dentin tissue in vivo. After performing restorative procedures and tooth extractions, ten specimens were sectioned in a mesiodistal direction. One dental section was used for light microscope analysis, in which both the resin tag length and hybrid layer thickness were measured, while the other section was analyzed using a microtensile test (0.5 mm/min). The fractured surface of the latter section was characterized using a stereoscopic magnifying glass (40x magnifcation). The results were subject to statistical analysis using the Pearson Correlation Test (a = 0.05). The hybrid layer thickness, resin tag length and resin bond strength mean values were 2.19 microm (0.34), 4.34 microm (0.28) and 9.73 MPa (5,55), respectively. In addition, correlation tests between the resin tag length and the resin bond strength (r=0.014) and also between the hybrid layer thickness and bond strength (r=0.43), showed no statistically significant correlation. The microtensile bond strength of Adper Prompt L Pop self-etching adhesive system does not depend on hybrid layer thickness or resin tag length.