992 resultados para indirect image orientation
Resumo:
Crys.m is a MATLAB routine that combines a micrograph of a crystal with a scaleable, rotatable three-dimensional cage structure to determine the orientation of the crystal axes. The example presented here uses the morphology of tetragonal lysozyme. Rotation of the cage until it aligns with the crystal in the image yields the orientation of the c axis of the crystal relative to the image normal. This analysis can be used for quantitative determination of crystal orientation effects induced by electric, magnetic and/or gravitational fields.
Resumo:
Humans are highly social animals and often help unrelated individuals that may never reciprocate the altruist's favour(1-5). This apparent evolutionary puzzle may be explained by the altruist's gain in social image: image-scoring bystanders, also known as eavesdroppers, notice the altruistic act and therefore are more likely to help the altruist in the future(5-7). Such complex indirect reciprocity based on altruistic acts may evolve only after simple indirect reciprocity has been established, which requires two steps. First, image scoring evolves when bystanders gain personal benefits from information gathered, for example, by finding cooperative partners(8-10). Second, altruistic behaviour in the presence of such bystanders may evolve if altruists benefit from access to the bystanders. Here, we provide experimental evidence for both of the requirements in a cleaning mutualism involving the cleaner fish Labroides dimidiatus. These cleaners may cooperate and remove ectoparasites from clients or they may cheat by feeding on client mucus(11,12). As mucus may be preferred over typical client ectoparasites(13), clients must make cleaners feed against their preference to obtain a cooperative service. We found that eavesdropping clients spent more time next to 'cooperative' than 'unknown cooperative level' cleaners, which shows that clients engage in image-scoring behaviour. Furthermore, trained cleaners learned to feed more cooperatively when in an `image-scoring' than in a 'non-image-scoring' situation.
Resumo:
Following adaptation to an oriented (1-d) signal in central vision, the orientation of subsequently viewed test signals may appear repelled away from or attracted towards the adapting orientation. Small angular differences between the adaptor and test yield 'repulsive' shifts, while large angular differences yield 'attractive' shifts. In peripheral vision, however, both small and large angular differences yield repulsive shifts. To account for these tilt after-effects (TAEs), a cascaded model of orientation estimation that is optimized using hierarchical Bayesian methods is proposed. The model accounts for orientation bias through adaptation-induced losses in information that arise because of signal uncertainties and neural constraints placed upon the propagation of visual information. Repulsive (direct) TAEs arise at early stages of visual processing from adaptation of orientation-selective units with peak sensitivity at the orientation of the adaptor (theta). Attractive (indirect) TAEs result from adaptation of second-stage units with peak sensitivity at theta and theta+90 degrees , which arise from an efficient stage of linear compression that pools across the responses of the first-stage orientation-selective units. A spatial orientation vector is estimated from the transformed oriented unit responses. The change from attractive to repulsive TAEs in peripheral vision can be explained by the differing harmonic biases resulting from constraints on signal power (in central vision) versus signal uncertainties in orientation (in peripheral vision). The proposed model is consistent with recent work by computational neuroscientists in supposing that visual bias reflects the adjustment of a rational system in the light of uncertain signals and system constraints.
Resumo:
The aim of this Interdisciplinary Higher Degrees project was the development of a high-speed method of photometrically testing vehicle headlamps, based on the use of image processing techniques, for Lucas Electrical Limited. Photometric testing involves measuring the illuminance produced by a lamp at certain points in its beam distribution. Headlamp performance is best represented by an iso-lux diagram, showing illuminance contours, produced from a two-dimensional array of data. Conventionally, the tens of thousands of measurements required are made using a single stationary photodetector and a two-dimensional mechanical scanning system which enables a lamp's horizontal and vertical orientation relative to the photodetector to be changed. Even using motorised scanning and computerised data-logging, the data acquisition time for a typical iso-lux test is about twenty minutes. A detailed study was made of the concept of using a video camera and a digital image processing system to scan and measure a lamp's beam without the need for the time-consuming mechanical movement. Although the concept was shown to be theoretically feasible, and a prototype system designed, it could not be implemented because of the technical limitations of commercially-available equipment. An alternative high-speed approach was developed, however, and a second prototype syqtem designed. The proposed arrangement again uses an image processing system, but in conjunction with a one-dimensional array of photodetectors and a one-dimensional mechanical scanning system in place of a video camera. This system can be implemented using commercially-available equipment and, although not entirely eliminating the need for mechanical movement, greatly reduces the amount required, resulting in a predicted data acquisiton time of about twenty seconds for a typical iso-lux test. As a consequence of the work undertaken, the company initiated an 80,000 programme to implement the system proposed by the author.
Resumo:
To represent the local orientation and energy of a 1-D image signal, many models of early visual processing employ bandpass quadrature filters, formed by combining the original signal with its Hilbert transform. However, representations capable of estimating an image signal's 2-D phase have been largely ignored. Here, we consider 2-D phase representations using a method based upon the Riesz transform. For spatial images there exist two Riesz transformed signals and one original signal from which orientation, phase and energy may be represented as a vector in 3-D signal space. We show that these image properties may be represented by a Singular Value Decomposition (SVD) of the higher-order derivatives of the original and the Riesz transformed signals. We further show that the expected responses of even and odd symmetric filters from the Riesz transform may be represented by a single signal autocorrelation function, which is beneficial in simplifying Bayesian computations for spatial orientation. Importantly, the Riesz transform allows one to weight linearly across orientation using both symmetric and asymmetric filters to account for some perceptual phase distortions observed in image signals - notably one's perception of edge structure within plaid patterns whose component gratings are either equal or unequal in contrast. Finally, exploiting the benefits that arise from the Riesz definition of local energy as a scalar quantity, we demonstrate the utility of Riesz signal representations in estimating the spatial orientation of second-order image signals. We conclude that the Riesz transform may be employed as a general tool for 2-D visual pattern recognition by its virtue of representing phase, orientation and energy as orthogonal signal quantities.
Cross-orientation masking is speed invariant between ocular pathways but speed dependent within them
Resumo:
In human (D. H. Baker, T. S. Meese, & R. J. Summers, 2007b) and in cat (B. Li, M. R. Peterson, J. K. Thompson, T. Duong, & R. D. Freeman, 2005; F. Sengpiel & V. Vorobyov, 2005) there are at least two routes to cross-orientation suppression (XOS): a broadband, non-adaptable, monocular (within-eye) pathway and a more narrowband, adaptable interocular (between the eyes) pathway. We further characterized these two routes psychophysically by measuring the weight of suppression across spatio-temporal frequency for cross-oriented pairs of superimposed flickering Gabor patches. Masking functions were normalized to unmasked detection thresholds and fitted by a two-stage model of contrast gain control (T. S. Meese, M. A. Georgeson, & D. H. Baker, 2006) that was developed to accommodate XOS. The weight of monocular suppression was a power function of the scalar quantity ‘speed’ (temporal-frequency/spatial-frequency). This weight can be expressed as the ratio of non-oriented magno- and parvo-like mechanisms, permitting a fast-acting, early locus, as befits the urgency for action associated with high retinal speeds. In contrast, dichoptic-masking functions superimposed. Overall, this (i) provides further evidence for dissociation between the two forms of XOS in humans, and (ii) indicates that the monocular and interocular varieties of XOS are space/time scale-dependent and scale-invariant, respectively. This suggests an image-processing role for interocular XOS that is tailored to natural image statistics—very different from that of the scale-dependent (speed-dependent) monocular variety.
Resumo:
Distributed representations (DR) of cortical channels are pervasive in models of spatio-temporal vision. A central idea that underpins current innovations of DR stems from the extension of 1-D phase into 2-D images. Neurophysiological evidence, however, provides tenuous support for a quadrature representation in the visual cortex, since even phase visual units are associated with broader orientation tuning than odd phase visual units (J.Neurophys.,88,455–463, 2002). We demonstrate that the application of the steering theorems to a 2-D definition of phase afforded by the Riesz Transform (IEEE Trans. Sig. Proc., 49, 3136–3144), to include a Scale Transform, allows one to smoothly interpolate across 2-D phase and pass from circularly symmetric to orientation tuned visual units, and from more narrowly tuned odd symmetric units to even ones. Steering across 2-D phase and scale can be orthogonalized via a linearizing transformation. Using the tiltafter effect as an example, we argue that effects of visual adaptation can be better explained by via an orthogonal rather than channel specific representation of visual units. This is because of the ability to explicitly account for isotropic and cross-orientation adaptation effect from the orthogonal representation from which both direct and indirect tilt after-effects can be explained.
Resumo:
This study explored the perceptions of family environment, body image and self esteem of women who suffer from anorexia nervosa, bulimia nervosa, and depression. Using a nonequivalent control group design, one hundred and fifty women with anorexia nervosa (n = 50), bulimia nervosa (n = 50), and depression (n = 50) were given the Family Environment Scale (FES) and the Eating Disorders Inventory-2 (EDI-2). The objectives of this study were to: (1) study how women with anorexia nervosa and bulimia nervosa perceive their family environment as measured by the FES; (2) compare and contrast perceptions of family environment of women with anorexia nervosa and bulimia nervosa with the control group; (3) compare and contrast perceived levels of self esteem and body image as measured by the EDI-2 of women with anorexia nervosa and bulimia nervosa with the control group; and (4) examine the perceived family environments of eating disordered and non-eating disordered women with regard to body image and self esteem. Results suggested, women who suffered from anorexia nervosa or bulimia nervosa scored significantly lower (p $<$.021) on the Expressiveness, Intellectual-Cultural Orientation, and Active-Recreational subscales of the FES. The results also indicated that women who suffered from bulimia nervosa scored significantly higher (p $<$.015) than women who suffered from anorexia nervosa on the Conflict and Independence subscales of the FES. The results of studying these three populations reflected that women who suffered from anorexia nervosa scored significantly different (p $<$.000) than women who suffered from bulimia nervosa on many of the subscales of the EDI-2. The findings of the study confirmed that women who suffered from anorexia nervosa or bulimia nervosa scored significantly different (p $<$.000) on the subscales of the EDI-2 compared to women who suffered from depression. It was also confirmed that a relationship does exist between perceptions of body image and self esteem and perceptions of family environment amongst women with anorexia nervosa and bulimia nervosa as compared to depressed women. The findings of the study indicated that women who suffered from anorexia nervosa tended to: be less expressive and independent; handle conflict less openly; have a greater drive for thinness; have greater body dissatisfaction; be more perfectionistic; and struggle more intensely with fears around maturity and social insecurity than did women who suffered from bulimia nervosa or depression. In addition, the findings of the study also suggested that women who suffered from bulimia nervosa tended to: be raised in homes where openly expressed anger is permitted amongst family members; have a lesser drive for thinness; have less body dissatisfaction; be less perfectionistic; and not struggle as intensely with fears around maturity and social insecurity as do women who suffered from anorexia nervosa, but more than women who suffer from depression. Treatment implications that may assist community college professors and counselors in meeting the special needs of this special group of women were also discussed. (Abstract shortened by UMI.) ^
Resumo:
In the discussion - Indirect Cost Factors in Menu Pricing – by David V. Pavesic, Associate Professor, Hotel, Restaurant and Travel Administration at Georgia State University, Associate Professor Pavesic initially states: “Rational pricing methodologies have traditionally employed quantitative factors to mark up food and beverage or food and labor because these costs can be isolated and allocated to specific menu items. There are, however, a number of indirect costs that can influence the price charged because they provide added value to the customer or are affected by supply/demand factors. The author discusses these costs and factors that must be taken into account in pricing decisions. Professor Pavesic offers as a given that menu pricing should cover costs, return a profit, reflect a value for the customer, and in the long run, attract customers and market the establishment. “Prices that are too high will drive customers away, and prices that are too low will sacrifice profit,” Professor Pavesic puts it succinctly. To dovetail with this premise the author provides that although food costs measure markedly into menu pricing, other factors such as equipment utilization, popularity/demand, and marketing are but a few of the parenthetic factors also to be considered. “… there is no single method that can be used to mark up every item on any given restaurant menu. One must employ a combination of methodologies and theories,” says Professor Pavesic. “Therefore, when properly carried out, prices will reflect food cost percentages, individual and/or weighted contribution margins, price points, and desired check averages, as well as factors driven by intuition, competition, and demand.” Additionally, Professor Pavesic wants you to know that value, as opposed to maximizing revenue, should be a primary motivating factor when designing menu pricing. This philosophy does come with certain caveats, and he explains them to you. Generically speaking, Professor Pavesic says, “The market ultimately determines the price one can charge.” But, in fine-tuning that decree he further offers, “Lower prices do not automatically translate into value and bargain in the minds of the customers. Having the lowest prices in your market may not bring customers or profit. “Too often operators engage in price wars through discount promotions and find that profits fall and their image in the marketplace is lowered,” Professor Pavesic warns. In reference to intangibles that influence menu pricing, service is at the top of the list. Ambience, location, amenities, product [i.e. food] presentation, and price elasticity are discussed as well. Be aware of price-value perception; Professor Pavesic explains this concept to you. Professor Pavesic closes with a brief overview of a la carte pricing; its pros and cons.
Resumo:
Scientists planning to use underwater stereoscopic image technologies are often faced with numerous problems during the methodological implementations: commercial equipment is too expensive; the setup or calibration is too complex; or the imaging processing (i.e. measuring objects in the stereo-images) is too complicated to be performed without a time-consuming phase of training and evaluation. The present paper addresses some of these problems and describes a workflow for stereoscopic measurements for marine biologists. It also provides instructions on how to assemble an underwater stereo-photographic system with two digital consumer cameras and gives step-by-step guidelines for setting up the hardware. The second part details a software procedure to correct stereo-image pairs for lens distortions, which is especially important when using cameras with non-calibrated optical units. The final part presents a guide to the process of measuring the lengths (or distances) of objects in stereoscopic image pairs. To reveal the applicability and the restrictions of the described systems and to test the effects of different types of camera (a compact camera and an SLR type), experiments were performed to determine the precision and accuracy of two generic stereo-imaging units: a diver-operated system based on two Olympus Mju 1030SW compact cameras and a cable-connected observatory system based on two Canon 1100D SLR cameras. In the simplest setup without any correction for lens distortion, the low-budget Olympus Mju 1030SW system achieved mean accuracy errors (percentage deviation of a measurement from the object's real size) between 10.2 and -7.6% (overall mean value: -0.6%), depending on the size, orientation and distance of the measured object from the camera. With the single lens reflex (SLR) system, very similar values between 10.1% and -3.4% (overall mean value: -1.2%) were observed. Correction of the lens distortion significantly improved the mean accuracy errors of either system. Even more, system precision (spread of the accuracy) improved significantly in both systems. Neither the use of a wide-angle converter nor multiple reassembly of the system had a significant negative effect on the results. The study shows that underwater stereophotography, independent of the system, has a high potential for robust and non-destructive in situ sampling and can be used without prior specialist training.