Viability of tallow inclusion in Atlantic salmon diet, as assessed by an on-farm grow out trial

The results of a recent increase in research interest directed at the inclusion of tallow in fish feed formulations are suggesting tallow is viable as a potential substitute for other alternative lipid sources such as poultry by-product oil. Although strong growth performance data has been shown, reservations still exist regarding reduced digestibility and the potential impacts this could have on performance over the duration of a grow-out period in low temperature conditions. Also little information is yet available on the potential effect of dietary tallow inclusion on final product quality. A large scale farm based study testing the inclusion of tallow at 40% inclusion, partially replacing poultry by-product oil, in commercial diets of Atlantic salmon over a winter grow-out period in southern Tasmania, Australia was conducted. Tallow inclusion had no impact on growth performance or nutrient digestibility. Tallow resulted in a slight improvement in fillet quality exhibiting a significant reduction in n - 6 PUFA and the n6:n3 ratio, and an increased n - 3LC-PUFA tissue deposition. Consumers were unable to display any preference in liking between 3 salmon products (cold smoked, hot smoked, and cooked) as a result of tallow inclusion. This study demonstrates the viability of partial inclusion of tallow in Atlantic salmon diets over a winter grow-out period. Statement of relevance: Improved knowledge of alternative dietary energy sources (oils and fats) to be used in aquafeed, (replacing the increasingly expensive, and diminishingly available, fish oil) is a key area of research towards improved environmental sustainability and economic viability of the aquaculture sector. Following a promising laboratory based, research scale, in vivo trial aimed at assessing the viability of tallow in salmon feed, a larger and longer duration farm-based trial was implemented to validate initial findings. Consumer test of final products (fresh-cooked, hot smoked and cold smoked fillets) showed no modification of sensorial attributes. Tallow is hereto shown to be a highly viable alternative oil for the salmon aquafeed industry.

A PPCCIPS: a Política Pública da Coleta Complementar Itinerante e Programada de Sangue, sob a luz da teoria do ciclo da política pública

This study aimed to focus on aspects of public administration concerning the implementation of the public policy of complementary blood collection by the itinerant and scheduled PPCCIPS services either trough off local unity or mobile unit blood collection operations, which are managed by the State Institute of Hematology Arthur de Siqueira Cavalcanti - HEMORIO. The case study method was used in that public health institutional field, in search for a better understanding of responsibilities and management related to collection, serology, fractionation, storage and distribution of blood supply to almost all public hospitals and clinics, summed up to agreements with the single health system of the State of Rio de Janeiro. Bibliographic references, documentary and field data obtained through interviews and systematic observation in the public servants of HEMORIO workplaces, were treated by the analysis of the content method and the results of this research revealed the complexity of those services, and needs in outstanding aspects of infrastructure, equipment, logistics and personnel, which are critical for the achievement of the increased public collection of blood in the Rio de Janeiro State, endorsing the suggestions for the implementation of PPCCIPS in HEMORIO. The main point found in this research results concern the immanent ethical commitment of that public service personnel, including staff members and low ranking members as well, perceived due to a brief philosophical overlook on that personnel¿s attitudes. An important strategic aspect was revealed by the need for excellence of midia communications and education programs to implement the community involvement in the whole process. Final reflections point out that personnel posture is considered vital for the quality of the expected care of the technical activities and also for the quality of its final products release to the local public, fluminense, which is the irreplaceable human blood, and their derivatives. Despite the author¿s effort in this dissertation there is much more to be studied on that crucial theme.

Componentes com marcas: modelo conceitual e investigação empírica do comportamento do consumidor

Estudos comprovam que determinados componentes exercem uma função fundamental para o desempenho do produto final, por exemplo o microprocessador Intel e o revestimento Teflon. Assim como os exemplos, alguns destes componentes de produtos possuem marca, as quais tem notoriedade para o consumidor final. Ou seja, o fabricante de componente começa a ter reconhecimento de marca na mente do consumidor. Devido a esta tendência de mercado, este estudo verificará inicialmente, os fatores que determinam a lembrança de marca de componentes por parte do consumidor final. E posteriormente, analisará as influências desta percepção de marca, e do reconhecimento dos benefícios do componente para a decisão de compra do consumidor. Para tanto, o estudo propõe o desenvolvimento de um modelo conceitual, o qual será testado empiricamente. Este modelo tem como base o modelo de decisão de compra do consumidor para produto final, com sugeridas adaptações para a situação de marcas de componentes.

Cooperativa habitacional autofinanciável :uma alternativa de mercado à escassez de financiamento

As an example of what happened in Brazil in the 90s, it s noticed in Natal a new system of cooperative housing production which is done by advancing the users resources selffinancing. This system comes as an alternative for the real state market performance since the end of the National Housing Bank (BNH), in 1986. Self-financed housing cooperatives play an important social role by contributing to own housing acquisition by low-income population, without, however, becoming a mechanism of social interest housing production. It is important to consider that Brazil registers a housing deficit of 6.6 million housing units (IBGE 2000/Census), which, compared to 1991, shows an increment of 21.7% to a growth rate of 2.2% a year. This deficit figure has been deepening, mainly with the end of the National Housing Bank (BNH). The self-financed cooperative housing production broadens around the Metropolitan Region of Natal (RMN) and remains as an alternative to the lack of financing in the housing / real state market. In general, the aim of this work is to analyze the role of self-financing housing cooperatives on the housing production in the RMN, in order to identify their role in the real state market, in the own housing promotion and in the housing policy. The Universe of this study is performance of four housing cooperatives - CHAF-RN, COOPHAB-RN, MULTHCOOP e CNH - that work through self-financing. It is considered here an amount of 38 undertakings launched between 1993 and 2002, including 8143 housing units. The methodology adopted consists of bibliographic, documental and field research. As a result, actions like brokerage, marketing, speculation, and the criteria to define places for undertakings and final products, show how close they are to the housing market production. As a matter of fact, this short distance explains why the self-financed cooperative production for social interest housing is still limited. This reinforces the theory that it is necessary to define and implement a subsidized housing policy to serve the low-income Brazilian population

Estudo do efeito da adição da escória de aciaria no processamento e propriedades finais de telhas cerâmicas

This research presents an overview of the addition steelwork dust of ceramic shingles in order to contribute to the utilization use of such residue. The ceramic industry perspective in the Brazilian State of Piauí is quite promising. Unlike other productive sectors, the ceramic industry uses basically natural raw materials. Its final products are, in short, the result of transforming clay compounds. These raw materials are composed primarily of aluminum oxide, silicon, iron, sodium, magnesium, end calcium, among others. It was verified that steelwork dust is composed primarily of these same oxides, so that its incorporation in to structural ceramics is a very reasonable idea. Both clay and steelwork powder were characterized by AG, XRF, XRD, TGA and DTA. In addition, steelwork dust samples containing (0%, 5%, 10%, 15%, 20% and 25%) were extruded and burned at 800°C, 850°C, 900°C and 950°C. Then t echnological tests of linear shrinkage, water uptake, apparent porosity, apparent density and flexural strengthwere carried at. The results showed the possibility of using steelwork powder in ceramic shingles until 15% significant improvement in physical and mechanical properties. This behavior shows the possibility of burning at temperatures lower than 850ºC, thus promoting a product final cost reduction

Modelo de gerenciamento de estoques de peças de reposição para empresas de transporte urbano de passageiros

This work searches to offer a model to improve spare parts stock management for companies of urban passenger transport by bus, with the consequent progress in their maintenance management. Also known as MRO items (Maintenance, Repair and Operations), these spare parts, according their consumption and demand features, cost, criticity to operation, lead-time, quantity of suppliers, among other parameters, shouldn´t have managed their inventory like normal production items (work in process e final products), that because their features, are managed by more predictable models based, for example, in economic order quantity. In the case specifically of companies of urban passenger transport by bus, items MRO have significant importance in their assets and a bad management of these inventories can cause serious losses to company, leading it even bankrupticy business, in more severe situations which missing spare part provokes vehicles shutdown indefinitely. Given slight attention to the issue, which translates in little literature available about it when compared to that literature about normal items stocks, and due the fact that MRO items be critical to bus urban transport of passengers companies´, it is necessary, so, deepen in this theme searching to give technical and scientific subsidies to companies that work, in many times, empirically, with these so decisive inputs to their business. As a typical portfolio problem, in which there are n items, separated into critical and noncritical, while competing for the same resource, it was developed a new algorithm to aid in a better inventory management of spare parts used only in corrective maintenance (whose failures are unpredictable and random), by analyzing the cost-benefit ratio, which compares the level of service versus cost of each item. The model was tested in a company of urban passenger transport by bus from the city of Natal, who anonymously provided their real data to application in this work

Desenvolvimento de um núcleo versátil e integrado de ferramentas CAD/CAE para a modelagem e simulação de peças mecânicas

Currently there is still a high demand for quality control in manufacturing processes of mechanical parts. This keeps alive the need for the inspection activity of final products ranging from dimensional analysis to chemical composition of products. Usually this task may be done through various nondestructive and destructive methods that ensure the integrity of the parts. The result generated by these modern inspection tools ends up not being able to geometrically define the real damage and, therefore, cannot be properly displayed on a computing environment screen. Virtual 3D visualization may help identify damage that would hardly be detected by any other methods. One may find some commercial softwares that seek to address the stages of a design and simulation of mechanical parts in order to predict possible damages trying to diminish potential undesirable events. However, the challenge of developing softwares capable of integrating the various design activities, product inspection, results of non-destructive testing as well as the simulation of damage still needs the attention of researchers. This was the motivation to conduct a methodological study for implementation of a versatile CAD/CAE computer kernel capable of helping programmers in developing softwares applied to the activities of design and simulation of mechanics parts under stress. In this research it is presented interesting results obtained from the use of the developed kernel showing that it was successfully applied to case studies of design including parts presenting specific geometries, namely: mechanical prostheses, heat exchangers and piping of oil and gas. Finally, the conclusions regarding the experience of merging CAD and CAE theories to develop the kernel, so as to result in a tool adaptable to various applications of the metalworking industry are presented

Suco desidratado de caju (Anacardium occidentale L.) por atomização: caracterização físico-química, bioativa e estudo da vida de prateleira do produto

Despite the relatively organized cashew (Anacardium occidentale L.) productive chain and the number of cashew derivatives found in the market, it is estimated that over 90% of the cashew peduncle is wasted. A possible strategy for a better commercial exploitation of this agroindustrial commodity would be the production of spray dried cashew pulp. Thus, this paper approaches the yellow cashew pulp spray drying process and the final product evaluation. Based on that, the shelf life of the spray dried cashew pulp packed in different packaging was evaluated. Drying was conducted in two drying temperatures (140 °C to 150 °C) and two concentrations of Arabic gum (AG, 15% and 25%), which summed four experimental groups. The drying performance was evaluated as well as the physicochemical characteristics (moisture, water activity, total soluble solids, pH, density, solubility, particle diameter, hygroscopicity, degree of caking, color, scanning electronic microscopy and X-ray diffraction), composition (protein, ash, fat and sugars) and bioactive and functional value (total phenolic compounds, carotenoids, ascorbic acid and antioxidant activity) of the final products. Results showed spray drying efficiency higher than 65% for all experiments, mainly for the C4 group (150 °C and 25% AG) which reached efficiency of 93.4%. It was also observed high solubility (94.7% to 97.9%) and the groups with lower hygroscopicity (5.8% and 6.5%) were those with the highest proportion of drying coadjuvant. The particle diameters ranged between 14.7 μm and 30.2 μm and increased with the proportion of AG. When comparing the product before and after spray drying, the drying impact was evident. However, despite the observed losses, dried yellow cashew showed high phenolic concentration (from 235.9 to 380.4 mg GAE eq / 100 g DM), carotenoids between 0.22 and 0.49 mg/100 g DM and remarkable ascorbic acid levels (852.4 to 1346.2 mg/100 g DM), in addition to antioxidant activity ranging from 12.9 to 16.4 μmol TE/ g DM. The shelf life study revealed decreased phenolic content over time associated to a slight water activity increase. Overall, our results unveil the technological and bioactive potential of dried yellow cashew as a functional ingredient to be used in food formulations or as a ready-to-use product. The technological approach presented here can serve as an efficient strategy for a rational use of the cashew apple, avoiding its current underutilization

Thermal studies on protein isolates of white lupin seeds (Lupinus albus)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Immunomodulatory Effects of Palladium(II) Complexes of 1,2,4-Triazole on Murine Peritoneal Macrophages

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência de defeitos e diferentes processos de fabricação nas propriedades mecânicas finais de cerâmicas

Os materiais cerâmicos são atualmente cada vez utilizados como opção na engenharia mundial. Por se tratar de materiais com alta resistência mecânica, possuem muitas aplicações em diversas áreas, como por exemplo a de mancais, a automotiva (sensores, isoladores, catalisadores, pistões, válvulas, revestimentos), a de implantes biocompatíveis (dentário, substituição óssea, válvulas cardíacas), a de produtos sujeitos ao desgaste (guias), a de refratários (revestimento de equipamento bélico, componentes de fornos), a eletrônica, e outras. Nos processos de fabricação da cerâmica há uma gama de fatores que contribuem para as características do produto final. Devido a isso, muitos pesquisadores têm trabalhado no estudo da influência de determinados defeitos e técnicas de produção de cerâmicas nas características do produto final. Este trabalho tem como objetivo fazer uma revisão bibliográfica de recentes artigos que analisam a influência de fatores como velocidade de queima, surgimento de trincas, porosidade, fases cristalinas, e tamanho de partículas, nas propriedades mecânicas finais das cerâmicas. Pode-se concluir que é possível aperfeiçoar o processo de fabricação da cerâmica a fim de promover as melhores propriedades mecânicas possíveis, conhecendo-se fatores prejudiciais e métodos adequados para se obter o melhor produto final.

Craqueamento termocatalítico de óleo de girassol na presença da peneira molecular SAPO-5

The catalytic cracking of triglycerides presents itself as a possible alternative to the production of biofuels with low emission of pollutants. In this work were synthesized the SAPO-5, the catalysts for the cracking reaction of soybean oil is presented. The solids were powder X-ray diffraction (XRD), thermogravimetric analysis (TG/DTG) and infrared spectroscopy (FTIR). The analyses indicated that the synthesis method has employed to obtain materials with high surface area and high acid. The soybean oil thermal and thermal catalytic cracking, realized from the room temperature to 450 ºC in a simple distillation system, has allowed obtaining two liquid fractions, each consisting of two phases, one aqueous and another organic, organic liquid (OL). The OL obtained from first fractions has shown high acid index, even in the thermal catalytic process. The products obtained in the cracking of soybean oil were analyzed by distillation, acid number, infra-red spectroscopy, density, viscosity, carbon residue, cetane number determination and characterization. The analysis of the products obtained in the presence and in the absence of the SAPO-5 permitted to conclude that all the solids tested presented catalytic activity in the deoxygenation of final products only at the second step of the cracking process

Síntese e caracterização de carreadores de oxigênio para combustão com recirculação química obtidos via reação de combustão assistida por microondas

Perovskites oxides win importance by its properties and commercials applications, they have a high thermal stability, have conductive properties, electrical, catalytic, electro catalytic, optical and magnetic, and are thermally stable. Because of these properties, are being widely studied as carriers of oxygen in the process of power generation with CO2 capture. In this work, the base carrier system La1-xMexNiO3 (Me = Ca and Sr) were synthesized by the method via the combustion reaction assisted by microwave. were synthesized from the combustion reaction method by microwave process. This method control the synthesi`s conditions to obtain materials with specific characteristics. The carriers calcined at 800 ° C/2h were analyzed by thermal analysis (TG-DTA), to verify its thermal stability, X-ray diffraction (XRD) to verify the phase formation, with subsequent refinement by the Rietveld method, to quantify the percentage of phases formed, the surface area by BET method was determined, scanning electron microscopy (SEM) was obtained to evaluate the material morphology and temperature programmed reduction (TPR) was done to observe the metallic phase of the nickel. After all proposed characterization and analysis of their results can be inferred to these oxides, key features so that they can be applied as carriers for combustion reactions in chemical cycles. The final products showed perovskite-type structures K2NiF4 (main) and ABO3.

Adsorção dos gases NH3, NO e H2S em fosfato de vanadila, hidrogeno fosfato de vanadila e fosfatos de vanadila dopados por Al, Co, Mn e Cr

In this work were synthesized the materials called vanadyl phosphate, hydrogen vanadyl phosphate and vanadyl phosphate doped by transition metals with the aim in adsorption the following compounds: ammonia, hydrogen sulfide and nitrogen oxide. To characterize the starting compounds was used DRX, FTIR, FRX and TG analysis. After the characterization of substrates, proceeded de adsorption of NH3 and H2S gases in reactor, passing the gases with continuous flow for 30 min and room temperature. Gravimetric data indicate that the matrices of higher performance in adsorption of ammonia was those doped by aluminum and manganese, obtaining results of 216,77 mgNH3/g and 200,40 mgNH3/g of matrix, respectively. The matrice of higher performance in adsorption of hydrogen sulfide was that doped by manganese, obtaining results of 86,94 mgH2S/g of matrix. The synthesis of substrates VOPO4.2H2O and MnVOPO4.2H2O with nitrogen oxide was made in solution, aiming the final products VOPO4.G.nH2O and MnVOPO4.G.nH2O (G = NO and n = number of water molecules). The thermo analytical behavior and the infrared spectroscopy are indicative of formation of VOPO4.2,5NO.3H2O compound. Results of scanning electron microscopy (SEM) and Energy dispersive spectroscopy (EDS) of materials vanadyl phosphate and vanadyl phosphate modified after reaction in solid state or in solution with the gases show morphology changes in substrates, beyond the formation of orthorhombic sulfur crystals over their respective hosts when these adsorb hydrogen sulfide

Estudo da ação do extrato de Ginkgo biloba e amido hidroxietílico hipertônico na atenuação de alterações decorrentes de isquemia e reperfusão de órgãos esplâncnicos em ratos

A oclusão e reperfusão das artérias esplâncnicas ocasiona choque circulatório, causado principalmente pelo aumento de permeabilidade vascular e pela agressão celular provocada por radicais livres derivados do oxigênio. Este estudo tem por finalidade verificar a ação do extrato de Ginkgo biloba (Egb-761) e do amido hidroxietílico (AHH) na prevenção do choque circulatório produzido pela isquemia e reperfusão de órgãos esplâncnicos. O Egb-761 tem propriedades antioxidantes relatadas na literatura. O AHH, tem sido utilizado como recurso terapêutico do choque hipovolêmico. Ratos anestesiados receberam infusão contínua de Egb-761 ou AHH, sendo submetidos à isquemia (oclusão do tronco celíaco, artéria mesentérica superior e artéria mesentérica inferior por 30 minutos) e reperfusão (por 90 minutos) dos órgãos esplâncnicos. Foram feitas: análise histopatológica ileal, dosagem de malondialdeído ileal e determinação contínua da pressão arterial média (PAM). A PAM ao final do período de reperfusão foi significativamente mais elevada nos animais tratados com Egb-761 e AHH, que no grupo controle (F=18,29; p<0,001). Não houve diferença entre os grupos tratados e controle quanto à dosagem de MDA (H=4,61; p>0,10) e quanto às alterações histológicas (H=6,003; p>0,10). em conclusão, houve melhora nas condições hemodinâmicas, com atenuação do choque nos ratos que receberam Egb-761 ou AHH. Novos estudos serão necessários para se avaliar melhor as alterações histológicas e para esclarecer a formação de produtos finais da peroxidação lipídica.