934 resultados para filamentous fungi


Relevância:

60.00% 60.00%

Publicador:

Resumo:

The xylanolytic system of Aspergillus versicolor is controlled by induction and carbon catabolite repression. Carboxymethylcellulose and wheat bran were the best inducers of xylanolytic activity. When the fungus was grown for 5 days on VOGEL's liquid medium with wheat bran, the optimal pH and temperature for xylanase production were 6.5 and 30 degrees C, respectively. Optimal conditions for the xylanolytic activity assay were at pH 6.0 and 55 degrees C. The half-life at 60 degrees C of the crude enzyme was 6.5 and 21 minutes, in the absence or presence of substrate, respectively.Xylan is the main hemicellulosic component of plant biomass being present in appreciable quantities in agricultural and several agroindustrial wastes. From the products of xylan enzymatic hydrolysis it is possible to obtain cell protein, fuels and other chemicals. Xylanases combined with cellulase could have applications in food processing. Cellulase-free xylanases can be also utilized for preparation of cellulose pulps and liberation of textile fibres (WOODWARD 1984; BIELY 1985, WONG et al. 1988). In view of the potential applications of xylanases, a study of these enzymes from various sources and their multiplicity is desirable.Among xylanolytic microorganisms, filamentous fungi have been more extensively studied and the genus Aspergillus has been shown to be an efficient producer of xylanases. Preliminary observations from our laboratory have demonstrated that a strain of Aspergillus versicolor, isolated from Brazilian soil, produced high xylanase and low cellulase levels, which is an interesting characteristic for some industrial applications. In this report we describe the production and some properties of xylanase obtained from this fungus.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

60.00% 60.00%

Publicador:

Resumo:

A study to quantify the populations of filamentous fungi and actinomycetes was undertaken in a cerrado area, in Corumbatai county, São Paulo, at different depths of medium-textured red-yellow latosol, correlating them to humidity, organic matter, pH of the soil and climatic factors. The technique used was the serial dilution of composite soil samples (n=4), using Martin's medium with streptomycin for filamentous fungi and a starch medium for actinomycetes. The number of filamentous fungi was more abundant in the first soil layer, 0-5 cml compared to the other depths. The number of actinomycetes was higher between 5 cm and 50 cm depth. There were two-monthly variations in the number of filamentous fungi and actinomycetes. A sharp drop in fungi was found in May 1988 at all depths of the soil, when there was lower air temperature and an atypically high monthly rainfall for this period in the cerrado. Statistically significant and directly proportional correlations were obtained between the number of actinomycetes and the rainfall at depths of 0 to 5 cm and 50 to 100 cm. The results obtained in the different soil layers to 100 cm depth demonstrated the importance of the first 5 cm layer due to the heavy concentration of microorganisms, mainly the filamentous fungi, together with the highest organic matter content.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Aspergillus niger on paramorphogenic form showed to be efficient adsorbent to reactive azo dye Procion Blue MX-G, where it has obtained rates of colour removal above 99% in acid pH, at 120 minutes of equilibrium time. Temperature did not exert expressive influence in the process, and the applicability of Freundlich's, isotherm suggest the occurrence of various molecules layers of adsorbed dye on the substratum surface.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

A strain of Rhizopus sp. screened among more than 800 filamentous fungi showed great ability to produce a thermostable alpha-amylase by solid state fermentation. The best production was obtained with a bran moisture content of 40% when the enzyme activity reached 60 EU/g. of medium. During the purification procedures, a column of DEAE-Sephadex A-50 separated the enzyme in two fractions and the larger (85% of the total activity) showed optimum pH in a range from 4.0 to 5.6. Optimum temperature was found at 60-65 degrees C and in this range no loss of activity was observed after 60 min. of treatment in pH 5,0. Its K-m and V-m are, respectively, of 5.0 mg/ml of starch and 10,01 uMol of reducing sugar/min./mg. of protein. Its molecular weight was calculated in 64.000 by gel filtration in Sephadex G-200. The dextrinization power of the enzyme was observed preferentialy on substrates compound by chains with higher ramifications, that is: amylopectin > starch > amylose. Other aspects of the enzyme pattern action are also discussed.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Viable cells immobilized in inert supports are currently studied for a wide range of bioprocesses. The intrinsic advantages of such systems over suspended cultures incite new research, including studies on fundamental aspects as well as on the industrial viability of these non-conventional processes. In aerobic culture of filamentous fungi, scale-up is hindered by oxygen mass transfer limitation through the support material and bioprocess kinetics must be studied together with mass transfer limitation. In this work, experimental and simulated data of cephalosporin C production were compared. Concentrations in the bulk fermentation medium and cellular mass profiles inside the bioparticles are focused. Immobilized cells were used in a tower bioreactor, operated in fed-batch mode. To describe the radial variation of oxygen concentration within the pellet, a dead core model was used. Despite the extremely low sugar concentrations, bioreaction rates in the pellets were limited by the dissolved oxygen concentration. Cell growth occurs only in the outer layers, a result also confirmed by scanning electron microscopy. (C) 2001 Elsevier B.V. Ltd. All rights reserved.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

The structural complexity of the nitrogen sources strongly affects biomass production and secretion of hydrolytic enzymes in filamentous fungi. Fusarium oxysporum and Aspergillus nidulans were grown in media containing glucose or starch, and supplemented with a nitrogen source varying from a single ammonium salt (ammonium sulfate) to free amino acids (casamino acids), peptides (peptone) and protein (gelatin). In glucose, when the initial pH was adjusted to 5.0, for both microorganisms, higher biomass production occurred upon supplementation with a nitrogen source in the peptide form (peptone and gelatin). With a close to neutrality pH, biomass accumulation was lower only in the presence of the ammonium salt. When grown in starch, biomass accumulation and secretion of hydrolytic enzymes (amylolytic and proteolytic) by Fusarium also depended on the nature of the nitrogen supplement and the pH. When the initial pH was adjusted to 5.0, higher growth and higher amylolytic activities were detected in the media supplemented with peptone, gelatin and casamino acids. However, at pH 7.0, higher biomass accumulation and higher amylolytic activities were observed upon supplementation with peptone or gelatin. Ammonium sulfate and casamino acids induced a lower production of biomass, and a different level of amylolytic enzyme secretion: high in ammonium sulfate and low in casamino acids. Secretion of proteolytic activity was always higher in the media supplemented with peptone and gelatin. Aspergillus, when grown in starch, was not as dependent as Fusarium on the nature of nitrogen source or the pH. The results described in this work indicate that the metabolism of fungi is regulated not only by pH, but also by the level of structural complexity of the nitrogen source in correlation to the carbon source.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

The industrial production of antibiotics with filamentous fungi is usually carried out in conventional aerated and agitated tank fermentors. Highly viscous non-Newtonian broths are produced and a compromise must be found between convenient shear stress and adequate oxygen transfer. In this work, cephalosporin C production by bioparticles of immobilized cells of Cephalosporium acremonium ATCC 48272 was studied in a repeated batch tower bioreactor as an alternative to the conventional process. Also, gas-liquid oxygen transfer volumetric coefficients, k(L)a, were determined at various air flow-rates and alumina contents in the bioparticle. The bioparticles were composed of calcium alginate (2.0% w/w), alumina (<44 micra), cells, and water. A model describing the cell growth, cephalosporin C production, oxygen, glucose, and sucrose consumption was proposed. To describe the radial variation of oxygen concentration within the pellet, the reaction-diffusion model forecasting a dead core bioparticle was adopted. The k(L)a measurements with gel beads prepared with 0.0, 1.0, 1.5, and 2.0% alumina showed that a higher k(L)a value is attained with 1.5 and 2.0%. An expression relating this coefficient to particle density, liquid density, and air velocity was obtained and further utilized in the simulation of the proposed model. Batch, followed by repeated batch experiments, were accomplished by draining the spent medium, washing with saline solution, and pouring fresh medium into the bioreactor. Results showed that glucose is consumed very quickly, within 24 h, followed by sucrose consumption and cephalosporin C production. Higher productivities were attained during the second batch, as cell concentration was already high, resulting in rapid glucose consumption and an early derepression of cephalosporin C synthesizing enzymes. The model incorporated this improvement predicting higher cephalosporin C productivity. (C) 2004 Wiley Periodicals, Inc.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

In a biological and phytochemical study on the leaves of Psychotria spectabilis Steyerm., seven compounds were isolated and identified from the CHCl3/MeOH (2:1, v/v) and MeOH extracts. Among the isolates were two diterpenes, solidagenone and deoxysolidagenone; three coumarins, coumarin, umbelliferone, and psoralene; and two flavonols, quercetin and quercetrin. Biological evaluations showed that diterpenes and coumarins exhibited antifungal activity against the filamentous fungi Cladosporium cladosporioides (Fresen) de Vries and C sphaerospermum Penzig. Solidagenone and psoralene also displayed selective cytotoxic activity against Rad 52Y mutant yeast strain of Saccharomyces cerevisiae. In this paper, the isolation, structure elucidation, and bioactivity results of these compounds are reported.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Bioprocesses using filamentous fungi immobilized in inert supports present many advantages when compared to conventional free cell processes. However, assessment of the real advantages of the unconventional process demands a rigorous study of the limitations to diffusional mass transfer of the reagents, especially concerning oxygen. In this work, a comparative study was carried out on the cephalosporin C production process in defined medium containing glucose and sucrose as main carbon and energy sources, by free and immobilized cells of Cephalosporium acremonium ATCC 48272 in calcium alginate gel beads containing alumina. The effective diffusivity of oxygen through the gel beads and the effectiveness factors related to the respiration rate of the microorganism were determined experimentally. By applying Monod kinetics, the respiration kinetics parameters were experimentally determined in independent experiments in a complete production medium. The effectiveness factor experimental values presented good agreement with the theoretical values of the approximated zero-order effectiveness factor, considering the dead core model. Furthermore, experimental results obtained with immobilized cells in a 1.7-L tower bioreactor were compared with those obtained in 5-L conventional fermenter with free cells. It could be concluded that it is possible to attain rather high production rates working with relatively large diameter gel beads (ca. 2.5 mm) and sucrose consumption-based productivity was remarkably higher with immobilized cells, i.e., 0.33 gCPC/kg sucrose/h against 0.24 gCPC/kg sucrose/h in the aerated stirred tank bioreactor process. (C) 1999 John Wiley & Sons, Inc.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Aspergillus nidulans is a non-pathogenic fungus with well-developed genetics which provides an excellent model system for studying different aspects of drug resistance in filamentous fungi. As a preliminary step to characterizing genes that confer pleiotropic drug resistance in Aspergillus, we isolated cycloheximide-sensitive mutants of A. nidulans, which is normally resistant to this: drug. The rationale for this approach is to identify gents whose products are important for drug resistance by analysing mutations that alter the resistance/sensitivity status of the cell. Fifteen cycloheximide-sensitive (named scy for sensitive to cycloheximide) mutants of A, nidulans were isolated and genetically characterised. Each scy mutant was crossed with the wild-type strain and five of the crosses gave 50% cycloheximide-sensitive progeny suggesting that they carry a single mutation required for cycloheximide sensitivity. We examined ten sep mutants for resistance/sensitivity to other drugs or stress agents with different and/or the same mechanism of action, Sis of these mutants exhibited other altered resistance/sensitivity phenotypes which were linked to the cycloheximide sensitivity, These six mutants were analyzed by pairwise crosses and found to represent six linkage groups, named scyA-F. One of the mutants showed fragmentation of its vacuolar system and, in addition, its growth was osmotic, low-pi-II and oxidative-stress sensitive.

Relevância:

60.00% 60.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)