Synaptonemal polycomplexes in spermatids: a characteristic trait of Orthoptera?

Spermatogenesis was analysed in a cricket, Eneoptera surinamensis (Gryllidae, Orthoptera), using ultrathin serial sections and transmission electron microscopy. Special attention was placed on documentation of the development and structure of synaptonemal polycomplexes (PCs) within spermatid nuclei. Pachytene spermatocytes showed the usual tripartite synaptonemal complexes in the nuclear lumen. PCs were situated close to chromosomes at the periphery of spindles in prometaphase I spermatocytes, where microtubule density was low. The PCs are probably incorporated into the daughter nuclei of both meiotic divisions by adhesion to chromosomes. Finally, PCs end up within spermatid nuclei. Analysis of serial sections through three nuclei of young spermatids revealed at least one PC within each. The PCs were intimately attached to an electrondense spherical nuclear body. This topographical correlation was confirmed through inspection of random sections. The PCs may have an affinity to the spherical bodies. In more developed spermatids, PCs and nuclear bodies were missing. Disassembly products of the PCs may play a role in spermatid maturation. In a series of other Orthoptera species, PCs have been reported to occur in the cytoplasm or the nuclei of spermatids. In most other systematic groups, PCs do not form at all or disassemble earlier. The presence of PCs in young spermatids, therefore, seems to be typical of Orthoptera.

Supplementation with the histone deacetylase inhibitor trichostatin A during in vitro culture of bovine embryos

Summary Trichostatin A (TSA) is a histone deacetylase inhibitor that induces histone hyperacetylation and increases gene expression levels. The aim of the present study was to establish a suitable condition for the use of TSA in in vitro cultures of bovine embryos, and to determine whether TSA would increase blastocyst rates by improvement of chromatin remodelling during embryonic genome activation and by increasing the expression of crucial genes during early development. To test this hypothesis, 8-cell embryos were exposed to four concentrations of TSA for different periods of time to establish adequate protocols. In a second experiment, three experimental groups were selected for the evaluation of embryo quality based on the following parameters: apoptosis, total cell number and blastocyst hatching. TSA promoted embryonic arrest and degeneration at concentrations of 15, 25 and 50 nM. All treated groups presented lower blastocyst rates. Exposure of embryos to 5 nM for 144 h and to 15 nM for 48 h decreased blastocyst hatching. However, the terminal deoxynucleotidyl transferase-mediated dUTP nick-end labeling assay (TUNEL) assay revealed similar apoptosis rates and total cell numbers in all groups studied. Although, in the present study, TSA treatment did not improve the parameters studied, the results provided background information on TSA supplementation during in vitro culture of bovine embryos and showed that embryo quality was apparently not affected, despite a decrease in blastocyst rate after exposure to TSA. © Cambridge University Press 2011.

Influência de parâmetros construtivos e operacionais na vida em fadiga de uniões aparafusadas em tração

Pós-graduação em Engenharia Mecânica - FEG

Predominant Rab-GTPase amplicons contributing to oral squamous cell carcinoma progression to metastasis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Haploinsufficiency of a Spliceosomal GTPase Encoded by EFTUD2 Causes Mandibulofacial Dysostosis with Microcephaly

Mandibulofacial dysostosis with microcephaly (MFDM) is a rare sporadic syndrome comprising craniofacial malformations, microcephaly, developmental delay, and a recognizable dysmorphic appearance. Major sequelae, including choanal atresia, sensorineural hearing loss, and cleft palate, each occur in a significant proportion of affected individuals. We present detailed clinical findings in 12 unrelated individuals with MFDM; these 12 individuals compose the largest reported cohort to date. To define the etiology of MFDM, we employed whole-exome sequencing of four unrelated affected individuals and identified heterozygous mutations or deletions of EFTUD2 in all four. Validation studies of eight additional individuals with MFDM demonstrated causative EFTUD2 mutations in all affected individuals tested. A range of EPTUD2-mutation types, including null alleles and frameshifts, is seen in MFDM, consistent with haploinsufficiency; segregation is de novo in all cases assessed to date. U5-116kD, the protein encoded by EFTUD2, is a highly conserved spliceosomal GTPase with a central regulatory role in catalytic splicing and post-splicing-complex disassembly. MFDM is the fast multiple-malformation syndrome attributed to a defect of the major spliceosome. Our findings significantly extend the range of reported spliceosomal phenotypes in humans and pave the way for further investigation in related conditions such as Treacher Collins syndrome.

The COP9 signalosome counteracts the accumulation of cullin SCF ubiquitin E3 RING ligases during fungal development

Defects in the COP9 signalosome (CSN) impair multicellular development, including embryonic plant or animal death or a block in sexual development of the fungus Aspergillus nidulans. CSN deneddylates cullin-RING ligases (CRLs), which are activated by covalent linkage to ubiquitin-like NEDD8. Deneddylation allows CRL disassembly for subsequent reassembly. An attractive hypothesis is a consecutive order of CRLs for development, which demands repeated cycles of neddylation and deneddylation for reassembling CRLs. Interruption of these cycles could explain developmental blocks caused by csn mutations. This predicts an accumulation of neddylated CRLs exhibiting developmental functions when CSN is dysfunctional. We tested this hypothesis in A. nidulans, which tolerates reduced levels of neddylation for growth. We show that only genes for CRL subunits or neddylation are essential, whereas CSN is primarily required for development. We used functional tagged NEDD8, recruiting all three fungal cullins. Cullins are associated with the CSN1/CsnA subunit when deneddylation is defective. Two CRLs were identified which are specifically involved in differentiation and accumulate during the developmental block. This suggests that an active CSN complex is required to counteract the accumulation of specific CRLs during development.

Characterization of anti-silencing factor 1 in Leishmania major

Anti-silencing factor 1 (ASF1) is a histone chaperone that contributes to the histone deposition during nucleosome assembly in newly replicated DNA. It is involved in chromatin disassembly, transcription activation and in the cellular response to DNA damage. In Leishmania major the ASF1 gene (LmASF1) is located in chromosome 20 and codes for a protein showing 67% of identity with the Trypanosoma brucei TbASF1a. Compared to orthologous proteins, LmASF1 conserves the main residues relevant for its various biological functions. To study ASF1 in Leishmania we generated a mutant overexpressing LmASF1 in L. major. We observed that the excess of LmASF1 impaired promastigotes growth rates and had no impact on cell cycle progress. Differently from yeast, ASF1 overproduction in Leishmania did not affect expression levels of genes located on telomeres, but led to an upregulation of proteins involved in chromatin remodelling and physiological stress, such as heat shock proteins, oxidoreductase activity and proteolysis. In addition, we observed that LmASF1 mutant is more susceptible to the DNA damaging agent, methyl methane sulphonate, than the control line. Therefore, our study suggests that ASF1 from Leishmania pertains to the chromatin remodelling machinery of the parasite and acts on its response to DNA damage.

Valutazione di impatto ambientale di un gruppo elettrogeno mediante Life Cycle Assessment: il caso COGEM.

Il presente lavoro ha come oggetto l’analisi di impatto ambientale, svolta mediante la metodologia Life Cycle Assessment (LCA) di un gruppo elettrogeno prodotto da COGEM s.r.l., azienda italiana situata a Castel d’Argile, nel bolognese, con l’obiettivo di supportare eventuali scelte di riprogettazione del prodotto anche in termini di Design for Disassembly. Dopo una prima analisi del contesto attuale in cui si colloca, la metodologia LCA è stata studiata nel dettaglio per poterla poi applicare al prodotto in oggetto. Esso è stato individuato mediante un’analisi delle vendite di COGEM, in seguito si è svolta una fase di raccolta dati e si sviluppata l’analisi LCA usando il software SimaPro 7.1. I risultati ottenuti hanno consentito di individuare le possibili aree di miglioramento dell’impatto ambientale dell’intero ciclo di vita del gruppo elettrogeno. In particolare si sono valutate due soluzioni innovative: un gruppo elettrogeno alimentato a olio vegetale e uno progettato in ottica DFD per consentire un corretto smaltimento dei rifiuti.

Industrial ecology applied to ELV management. Material and energy recovery from ASR

This PhD thesis reports on car fluff management, recycling and recovery. Car fluff is the residual waste produced by car recycling operations, particularly from hulk shredding. Car fluff is known also as Automotive Shredder Residue (ASR) and it is made of plastics, rubbers, textiles, metals and other materials, and it is very heterogeneous both in its composition and in its particle size. In fact, fines may amount to about 50%, making difficult to sort out recyclable materials or exploit ASR heat value by energy recovery. This 3 years long study started with the definition of the Italian End-of-Life Vehicles (ELVs) recycling state of the art. A national recycling trial revealed Italian recycling rate to be around 81% in 2008, while European Community recycling target are set to 85% by 2015. Consequently, according to Industrial Ecology framework, a life cycle assessment (LCA) has been conducted revealing that sorting and recycling polymers and metals contained in car fluff, followed by recovering residual energy, is the route which has the best environmental perspective. This results led the second year investigation that involved pyrolysis trials on pretreated ASR fractions aimed at investigating which processes could be suitable for an industrial scale ASR treatment plant. Sieving followed by floatation reported good result in thermochemical conversion of polymers with polyolefins giving excellent conversion rate. This factor triggered ecodesign considerations. Ecodesign, together with LCA, is one of the Industrial Ecology pillars and it consists of design for recycling and design for disassembly, both aimed at the improvement of car components dismantling speed and the substitution of non recyclable material. Finally, during the last year, innovative plants and technologies for metals recovery from car fluff have been visited and tested worldwide in order to design a new car fluff treatment plant aimed at ASR energy and material recovery.

Respiratory chain complex I dysfunction in tumorigenesis

Diseases due to mutations in mitochondrial DNA probably represent the most common form of metabolic disorders, including cancer, as highlighted in the last years. Approximately 300 mtDNA alterations have been identified as the genetic cause of mitochondrial diseases and one-third of these alterations are located in the coding genes for OXPHOS proteins. Despite progress in identification of their molecular mechanisms, little has been done with regard to the therapy. Recently, a particular gene therapy approach, namely allotopic expression, has been proposed and optimized, although the results obtained are rather controversial. In fact, this approach consists in synthesis of a wild-type version of mutated OXPHOS protein in the cytosolic compartment and in its import into mitochondria, but the available evidence is based only on the partial phenotype rescue and not on the demonstration of effective incorporation of the functional protein into respiratory complexes. In the present study, we took advantage of a previously analyzed cell model bearing the m.3571insC mutation in MTND1 gene for the ND1 subunit of respiratory chain complex I. This frame-shift mutation induces in fact translation of a truncated ND1 protein then degraded, causing complex I disassembly, and for this reason not in competition with that allotopically expressed. We show here that allotopic ND1 protein is correctly imported into mitochondria and incorporated in complex I, promoting its proper assembly and rescue of its function. This result allowed us to further confirm what we have previously demonstrated about the role of complex I in tumorigenesis process. Injection of the allotopic clone in nude mice showed indeed that the rescue of complex I assembly and function increases tumor growth, inducing stabilization of HIF1α, the master regulator of tumoral progression, and consequently its downstream gene expression activation.

Untersuchungen des Keratinfilament-Turnovers in lebenden Zellen

Das Zytoskelett eukaryotischer Zellen besteht aus drei verschiedenen Protein-Netzwerken: den Aktinfilamenten, Mikrotubuli und Intermediärfilamenten. Intermediärfilamente wurden ursprünglich als statische Strukturen angesehen, die die mechanische Stabilisierung der Zellen übernehmen. In den letzten Jahren hat sich dieses Bild jedoch geändert: Intermediärfilament-Netzwerke sind hochdynamisch und unterliegen kontinuierlichen Veränderungen, welche durch Phosphorylierungen reguliert werden. Sie interagieren mit anderen Zytoskelett-Proteinen und greifen in die Regulation von Schlüsselsignalwegen, die Zellwachstum und Zellteilung sowie Apoptose und Stressantwort bestimmen, ein. Die Mechanismen der Filamentplastizität konnten bisher jedoch nicht vollständig aufgeklärt werden. So ist beispielsweise unklar, wo Auf- und Abbau der Filamente stattfindet und welche Faktoren an der Netzwerkmodulation beteiligt sind. Ziel meiner Arbeit war es, einen Beitrag zur Aufklärung dieser Mechanismen am Beispiel der epithelialen Keratin-Intermediärfilamente zu leisten. Mit Hilfe von mikroskopischen Zeitrafferaufnahmen von fluoreszenzmarkierten Zellklonen wurden Nukleationszentren in der Zellperipherie identifiziert, in denen Keratinfilamentvorläufer gebildet werden. Es handelt sich dabei um fokale Adhäsionskomplexe, die als Anheftungsstellen zwischen der extrazellulären Matrix und dem intrazellulären Aktinfilament-System dienen. Es konnte gezeigt werden, dass diese Filamentvorläufer-Entstehung für alle untersuchten Keratinisoformen gültig ist und in epitelialen als auch nicht-epithelialen Zelltypen abläuft. Knock-Down der Adhäsionskomponente Talin verhinderte die Keratinfilamentbildung. Modulation der fokalen Adhäsionskinase, die den Auf- und Abbau der Adhäsionskomplexe koordiniert, beeinflusste ebenso die Bildung der Keratinfilamentnetzwerke. Es konnte weiterhin beobachtet werden, dass die N-terminalen Isoformen IE und IF des Zytolinkers Plectin in fokalen Adhäsionen lokalisieren und damit möglicherweise an der Vernetzung von Keratinfilamentvorläufern, Zelladhäsionen und Aktinfilamenten beteiligt sind. Letztlich stellte sich heraus, dass die Bildung der Keratinfilamentvorläufer unabhängig von Proteintranslation ist. In den mikroskopischen Zeitrafferaufnahmen wurde im Anschluss an die Keratinfilamentbildung ein kontinuierlicher zentripetaler Transport der wachsenden Vorläuferpartikel beobachtet. An Hand von pharmakologischen Experimenten konnte gezeigt werden, dass dieser Transport Aktinfilament-abhängig ist. Zeitgleich kommt es zu Partikelfusion und Integration in das periphere Netzwerk, das sich weiterhin in Richtung auf das Zellzentrum bewegt. Mit Hilfe von Photoaktivierungsversuchen und Zellfusionsexperimenten konnte die Hypothese bestätigt werden, dass der Abbau der einwandernden Keratinfilamente in lösliche, rasch diffusible Zwischenstufen den kontinuierlichen peripheren Neuaufbau ermöglicht. Aus den Beobachtungen und bereits bekannten Ergebnissen wurde ein Modell des Keratin-Zyklus entwickelt, das die folgenden Stadien umfasst: Nukleation von Keratinfilamentvorläufern an fokalen Adhäsionen in der Zellperipherie, Elongation und Fusion der Keratinfilamentvorläufer bei zeitgleichem Aktinfilament-abhängigem zentripetalen Transport, Integration der Keratinfilamentvorläufer in das periphere Netzwerk, Bündelung der Filamente, Filamentabbau in lösliche Untereinheiten und Neubeginn des Zyklus in der Zellperipherie. Eine Störung dieses Zyklus liegt bei mutierten Keratinen vor, welche die Ursache von Blasen-bildenden Hauterkrankungen sind. In der vorliegenden Arbeit wurde am Beispiel von Keratin 6a-Mutanten, welche die Hauterkrankung Pachyonychia congenita verursachen, gezeigt, dass bei diesen Keratinen die Nukleation zwar im Bereich der Adhäsionskomplexe regelrecht abläuft, die anschließende Elongation und Netzwerkbildung aber gestört ist, so dass statt dessen kurzlebige, hyperphosphorylierte Granula entstehen. Der resultierende frustrane Keratin-Zyklus in der Zellperipherie ist stark beschleunigt und kann durch p38-Inhibierung gestoppt werden. Bei Proteasomeninhibierung wird der Zyklus in Richtung der Granulabildung verschoben. In dieser Arbeit wird erstmals das Keratin-Tretmühlen-Modell vorgestellt, das den regulierbaren Auf- und Abbau-Zyklus des Keratinnetzwerks beschreibt. Damit liegen testbare Hypothesen für die Aufklärung der Keratinfilament-Plastizität in physiologischen und pathologischen Situationen vor, die nach unseren ersten Ergebnissen auch von Relevanz für andere Intermediärfilamenttypen sind.

Efficient parallel proximity queries and an application to highly complex motion planning problems with many narrow passages

In vielen Bereichen der industriellen Fertigung, wie zum Beispiel in der Automobilindustrie, wer- den digitale Versuchsmodelle (sog. digital mock-ups) eingesetzt, um die Entwicklung komplexer Maschinen m ̈oglichst gut durch Computersysteme unterstu ̈tzen zu k ̈onnen. Hierbei spielen Be- wegungsplanungsalgorithmen eine wichtige Rolle, um zu gew ̈ahrleisten, dass diese digitalen Pro- totypen auch kollisionsfrei zusammengesetzt werden k ̈onnen. In den letzten Jahrzehnten haben sich hier sampling-basierte Verfahren besonders bew ̈ahrt. Diese erzeugen eine große Anzahl von zuf ̈alligen Lagen fu ̈r das ein-/auszubauende Objekt und verwenden einen Kollisionserken- nungsmechanismus, um die einzelnen Lagen auf Gu ̈ltigkeit zu u ̈berpru ̈fen. Daher spielt die Kollisionserkennung eine wesentliche Rolle beim Design effizienter Bewegungsplanungsalgorith- men. Eine Schwierigkeit fu ̈r diese Klasse von Planern stellen sogenannte “narrow passages” dar, schmale Passagen also, die immer dort auftreten, wo die Bewegungsfreiheit der zu planenden Objekte stark eingeschr ̈ankt ist. An solchen Stellen kann es schwierig sein, eine ausreichende Anzahl von kollisionsfreien Samples zu finden. Es ist dann m ̈oglicherweise n ̈otig, ausgeklu ̈geltere Techniken einzusetzen, um eine gute Performance der Algorithmen zu erreichen.rnDie vorliegende Arbeit gliedert sich in zwei Teile: Im ersten Teil untersuchen wir parallele Kollisionserkennungsalgorithmen. Da wir auf eine Anwendung bei sampling-basierten Bewe- gungsplanern abzielen, w ̈ahlen wir hier eine Problemstellung, bei der wir stets die selben zwei Objekte, aber in einer großen Anzahl von unterschiedlichen Lagen auf Kollision testen. Wir im- plementieren und vergleichen verschiedene Verfahren, die auf Hu ̈llk ̈operhierarchien (BVHs) und hierarchische Grids als Beschleunigungsstrukturen zuru ̈ckgreifen. Alle beschriebenen Verfahren wurden auf mehreren CPU-Kernen parallelisiert. Daru ̈ber hinaus vergleichen wir verschiedene CUDA Kernels zur Durchfu ̈hrung BVH-basierter Kollisionstests auf der GPU. Neben einer un- terschiedlichen Verteilung der Arbeit auf die parallelen GPU Threads untersuchen wir hier die Auswirkung verschiedener Speicherzugriffsmuster auf die Performance der resultierenden Algo- rithmen. Weiter stellen wir eine Reihe von approximativen Kollisionstests vor, die auf den beschriebenen Verfahren basieren. Wenn eine geringere Genauigkeit der Tests tolerierbar ist, kann so eine weitere Verbesserung der Performance erzielt werden.rnIm zweiten Teil der Arbeit beschreiben wir einen von uns entworfenen parallelen, sampling- basierten Bewegungsplaner zur Behandlung hochkomplexer Probleme mit mehreren “narrow passages”. Das Verfahren arbeitet in zwei Phasen. Die grundlegende Idee ist hierbei, in der er- sten Planungsphase konzeptionell kleinere Fehler zuzulassen, um die Planungseffizienz zu erh ̈ohen und den resultierenden Pfad dann in einer zweiten Phase zu reparieren. Der hierzu in Phase I eingesetzte Planer basiert auf sogenannten Expansive Space Trees. Zus ̈atzlich haben wir den Planer mit einer Freidru ̈ckoperation ausgestattet, die es erlaubt, kleinere Kollisionen aufzul ̈osen und so die Effizienz in Bereichen mit eingeschr ̈ankter Bewegungsfreiheit zu erh ̈ohen. Optional erlaubt unsere Implementierung den Einsatz von approximativen Kollisionstests. Dies setzt die Genauigkeit der ersten Planungsphase weiter herab, fu ̈hrt aber auch zu einer weiteren Perfor- mancesteigerung. Die aus Phase I resultierenden Bewegungspfade sind dann unter Umst ̈anden nicht komplett kollisionsfrei. Um diese Pfade zu reparieren, haben wir einen neuartigen Pla- nungsalgorithmus entworfen, der lokal beschr ̈ankt auf eine kleine Umgebung um den bestehenden Pfad einen neuen, kollisionsfreien Bewegungspfad plant.rnWir haben den beschriebenen Algorithmus mit einer Klasse von neuen, schwierigen Metall- Puzzlen getestet, die zum Teil mehrere “narrow passages” aufweisen. Unseres Wissens nach ist eine Sammlung vergleichbar komplexer Benchmarks nicht ̈offentlich zug ̈anglich und wir fan- den auch keine Beschreibung von vergleichbar komplexen Benchmarks in der Motion-Planning Literatur.

Human TOP1 residues implicated in species specificity of HIV-1 infection are required for interaction with BTBD2, and RNAi of BTBD2 in old world monkey and human cells increases permissiveness to HIV-1 infection

Host determinants of HIV-1 viral tropism include factors from producer cells that affect the efficiency of productive infection and factors in target cells that block infection after viral entry. TRIM5 restricts HIV-1 infection at an early post-entry step through a mechanism associated with rapid disassembly of the retroviral capsid. Topoisomerase I (TOP1) appears to play a role in HIV-1 viral tropism by incorporating into or otherwise modulating virions affecting the efficiency of a post-entry step, as the expression of human TOP1 in African Green Monkey (AGM) virion-producing cells increased the infectivity of progeny virions by five-fold. This infectivity enhancement required human TOP1 residues 236 and 237 as their replacement with the AGM counterpart residues abolished the infectivity enhancement. Our previous studies showed that TOP1 interacts with BTBD1 and BTBD2, two proteins which co-localize with the TRIM5 splice variant TRIM5 in cytoplasmic bodies. Because BTBD1 and BTBD2 interact with one HIV-1 viral tropism factor, TOP1, and co-localize with a splice variant of another, we investigated the potential involvement of BTBD1 and BTBD2 in HIV-1 restriction.

Stress-induced targeting of molecular chaperones in the yeast Saccharomyces cerevisiae

The eukaryotic stress response is an essential mechanism that helps protect cells from a variety of environmental stresses. Cell death can result if cells are not able to properly adapt and protect themselves against adverse stress conditions. Failure to properly deal with stress has implications in human diseases including neurodegenerative disorders and distinct cancers, emphasizing the importance of understanding the eukaryotic stress response in detail. As part of this response, expression of a battery of heat shock proteins (HSP) is induced, which act as molecular chaperones to assist in the repair or triage of unfolded proteins. The 90-kDa HSP (Hsp90) operates in the context of a multi-chaperone complex to promote the maturation of nuclear and cytoplasmic clients. I have discovered that Hsp90 and the co-chaperone Sba1 accumulate in the nucleus of quiescent Saccharomyces cerevisiae cells in a karyopherin-dependent manner. I isolated nuclear accumulation- defective HSP82 mutant alleles to probe the nature of this targeting event and identified a mutant with a single amino acid substitution (I578F) sufficient to prevent nuclear accumulation of Hsp90 in quiescent cells. Diploid hsp82-I578F cells exhibited pronounced defects in spore wall construction and maturation, resulting in catastrophic sporulation. The mislocalization and sporulation phenotypes were shared by another previously identified HSP82 mutant allele, further linking localization to Hsp90 functional status. Pharmacological inhibition of Hsp90 with macbecin in sporulating diploid cells also blocked spore formation, underscoring the importance of this chaperone in this developmental program. The yeast molecular chaperone Hsp104 is a member of the Hsp100 superfamily of AAA+ ATPases. Unlike the Hsp90 family of chaperones, Hsp104 is not restricted to a specific set of client proteins, but rather assists in reactivating stress-denatured proteins by solubilizing protein aggregates. I have discovered that Hsp104, along with the Hsp70 chaperone, Ssa1, and the sHSP Hsp26 accumulate into RNA processing bodies (P- bodies) and stress granules, sites of mRNA metabolism. I found that Hsp104 recruits both Ssa1 and Hsp26 to P-bodies and that these three chaperones are required for stress granule formation. These findings suggest a possible role for chaperones in mRNA metabolism by aiding in the assembly, disassembly or conversion of these enigmatic mRNP complexes. Taken together, the work presented in this dissertation serves to better understand the eukaryotic stress response by illustrating the importance of subcellular-chaperone localization in key biological processes.

The C-terminal domain of MinC inhibits assembly of the Z ring in Escherichia coli.

In Escherichia coli, the Min system, consisting of three proteins, MinC, MinD, and MinE, negatively regulates FtsZ assembly at the cell poles, helping to ensure that the Z ring will assemble only at midcell. Of the three Min proteins, MinC is sufficient to inhibit Z-ring assembly. By binding to MinD, which is mostly localized at the membrane near the cell poles, MinC is sequestered away from the cell midpoint, increasing the probability of Z-ring assembly there. Previously, it has been shown that the two halves of MinC have two distinct functions. The N-terminal half is sufficient for inhibition of FtsZ assembly, whereas the C-terminal half of the protein is required for binding to MinD as well as to a component of the division septum. In this study, we discovered that overproduction of the C-terminal half of MinC (MinC(122-231)) could also inhibit cell division and that this inhibition was at the level of Z-ring disassembly and dependent on MinD. We also found that fusing green fluorescent protein to either the N-terminal end of MinC(122-231), the C terminus of full-length MinC, or the C terminus of MinC(122-231) perturbed MinC function, which may explain why cell division inhibition by MinC(122-231) was not detected previously. These results suggest that the C-terminal half of MinC has an additional function in the regulation of Z-ring assembly.