Understanding Wax Printing: A Simple Micropatterning Process for Paper-Based Microfluidics

This technical note describes a detailed study on wax printing, a simple and inexpensive method for fabricating microfluidic devices in paper using a commercially available printer and hot plate. The printer prints patterns of solid wax on the surface of the paper, and the hot plate melts the wax so that it penetrates the full thickness of the paper. This process creates complete hydrophobic barriers in paper that define hydrophilic channels, fluid reservoirs, and reaction zones. The design of each device was based on a simple equation that accounts for the spreading of molten wax in paper.

Design of a lab scale direct-filtration system and its application in process lab

The Environmental Process and Simulation Center (EPSC) at Michigan Technological University started accommodating laboratories for an Environmental Engineering senior level class CEE 4509 Environmental Process and Simulation Laboratory since 2004. Even though the five units that exist in EPSC provide the students opportunities to have hands-on experiences with a wide range of water/wastewater treatment technologies, a key module was still missing for the student to experience a full cycle of treatment. This project fabricated a direct-filtration pilot system in EPSC and generated a laboratory manual for education purpose. Engineering applications such as clean bed head loss calculation, backwash flowrate determination, multimedia density calculation and run length prediction are included in the laboratory manual. The system was tested for one semester and modifications have been made both to the direct filtration unit and the laboratory manual. Future work is also proposed to further refine the module.

Laser induced forward transfer of silver pastes for printing of fingers in c-si cells.

The main objective of this work is to adapt the Laser Induced Forward Techniques (LIFT), a well- known laser direct writing technique for material transfer, to define metallic contacts (fingers and busbars) onto c-Si cells. The silver paste (with viscosity around 30-50 kcPs) is applied over a glass substrate using a coater. The thickness of the paste can be control changing the deposit parameters. The glass with the silver paste is set at a controlled gap over the c-Si cell. A solid state pulsed laser (532 nm) is focused at the glass/silver interface producing a droplet of silver that it is transferred to the c-Si cell. A scanner is used to print lines. The process parameters (silver paste thickness, gap and laser parameters -spot size, pulse energy and overlapping of pulses) are modified and the morphology of the lines is studied using confocal microscopy. Long lines are printed and the uniformity (in thickness and height) is studied. Some examples of metallization of larger areas (up to 10 cm x 10 cm) are presented.

Selling printing and direct advertising; handbook for management, salesmen, planners, and producers of printed promotion.

Mode of access: Internet.

Community organization and agency responsibility; a study of the process of community organization for social welfare, and of the role of the direct-service organizations as responsible participants

Includes bibliography.

The author's printing and publishing assistant, comprising explanations of the process of printing, preparation and calculation of manuscripts, choice of paper, type, binding, illustrations, publishing, advertising, & c. With an exemplification and description of the typographical marks used in the correction of the press.

Mode of access: Internet.

Operator, organizational, direct support, and general support maintenance manual : printing press, offset, web-fed, motor driven, 208V, 60 hertz, Hess and Barker model 3CX, FSN 3610-617-7566.

Includes index.

Operator, organizational, direct support, and general support maintenance manual : camera, copying, mobile process, 208-volt, 3 phase, 60 hertz, 24 x 30 inch, Consolidated International model 1969 NSN 3610-00-400-7588 ....

"April 1971."

Organizational, direct support, and general support maintenance repair parts and special tools list : reproduction set, diazo process 185.FL-M (NSN 3610-01-123-7782).

"10 August 1990."