HW Implementation of a Optimized Algorithm for the Application of Active Rules in a Transition P-system

P systems or Membrane Computing are a type of a distributed, massively parallel and non deterministic system based on biological membranes. They are inspired in the way cells process chemical compounds, energy and information. These systems perform a computation through transition between two consecutive configurations. As it is well known in membrane computing, a configuration consists in a m-tuple of multisets present at any moment in the existing m regions of the system at that moment time. Transitions between two configurations are performed by using evolution rules which are in each region of the system in a non-deterministic maximally parallel manner. This work is part of an exhaustive investigation line. The final objective is to implement a HW system that evolves as it makes a transition P-system. To achieve this objective, it has been carried out a division of this generic system in several stages, each of them with concrete matters. In this paper the stage is developed by obtaining the part of the system that is in charge of the application of the active rules. To count the number of times that the active rules is applied exist different algorithms. Here, it is presents an algorithm with improved aspects: the number of necessary iterations to reach the final values is smaller than the case of applying step to step each rule. Hence, the whole process requires a minor number of steps and, therefore, the end of the process will be reached in a shorter length of time.

Reduced-parameter model of head-related transfer functions for synthesized spatial audio

Digital systems can generate left and right audio channels that create the effect of virtual sound source placement (spatialization) by processing an audio signal through pairs of Head-Related Transfer Functions (HRTFs) or, equivalently, Head-Related Impulse Responses (HRIRs). The spatialization effect is better when individually-measured HRTFs or HRIRs are used than when generic ones (e.g., from a mannequin) are used. However, the measurement process is not available to the majority of users. There is ongoing interest to find mechanisms to customize HRTFs or HRIRs to a specific user, in order to achieve an improved spatialization effect for that subject. Unfortunately, the current models used for HRTFs and HRIRs contain over a hundred parameters and none of those parameters can be easily related to the characteristics of the subject. This dissertation proposes an alternative model for the representation of HRTFs, which contains at most 30 parameters, all of which have a defined functional significance. It also presents methods to obtain the value of parameters in the model to make it approximately equivalent to an individually-measured HRTF. This conversion is achieved by the systematic deconstruction of HRIR sequences through an augmented version of the Hankel Total Least Squares (HTLS) decomposition approach. An average 95% match (fit) was observed between the original HRIRs and those re-constructed from the Damped and Delayed Sinusoids (DDSs) found by the decomposition process, for ipsilateral source locations. The dissertation also introduces and evaluates an HRIR customization procedure, based on a multilinear model implemented through a 3-mode tensor, for mapping of anatomical data from the subjects to the HRIR sequences at different sound source locations. This model uses the Higher-Order Singular Value Decomposition (HOSVD) method to represent the HRIRs and is capable of generating customized HRIRs from easily attainable anatomical measurements of a new intended user of the system. Listening tests were performed to compare the spatialization performance of customized, generic and individually-measured HRIRs when they are used for synthesized spatial audio. Statistical analysis of the results confirms that the type of HRIRs used for spatialization is a significant factor in the spatialization success, with the customized HRIRs yielding better results than generic HRIRs.

HIPERLOCAL, DADOS E APLICATIVOS: inovações no fazer jornalismo e comunicação

A evolução tecnológica na comunicação contemporânea estrutura sistemas digitais via redes de computadores conectados e exploração maciça de dispositivos tecnológicos. Os dados digitais captados e distribuídos via aplicativos instalados em smartphones criam ambiente dinâmico comunicacional. O Jornalismo e a Comunicação tentam se adaptar ao novo ecossistema informacional impetrado pelas constantes inovações tecnológicas que possibilitam a criação de novos ambientes e sistemas para acesso à informação de relevância social. Surgem novas ferramentas para produção e distribuição de conteúdos jornalísticos, produtos baseados em dados e interações inteligentes, algoritmos usados em diversos processos, plataformas hiperlocais e sistemas de narrativas e produção digitais. Nesse contexto, o objetivo da pesquisa foi elaborar uma análise e comparação entre produtos de mídia e tecnologia específicos. Se as novas tecnologias acrescentam atributos às produções e narrativas jornalísticas, seus impactos na prática da atividade e também se há modificação nos processos de produção de informação de relevância social em relação aos processos jornalísticos tradicionais e consolidados. Investiga se o uso de informações insertadas pelos usuários, em tempo real, melhora a qualidade das narrativas emergentes através de dispositivos móveis e se a gamificação ou ludificação altera a percepção de credibilidade do jornalismo. Para que assim seja repensado a forma de se produzir e gerar informação e conhecimento para os públicos que demandam conteúdo

Progress and Research in Cybersecurity - Supporting a resilient and trustworthy system for the UK

Executive summary
Digital systems have transformed, and will continue to transform, our world. Supportive government policy, a strong research base and a history of industrial success make the UK particularly well-placed to realise the benefits of the emerging digital society. These benefits have already been substantial, but they remain at risk. Protecting the benefits and minimising the risks requires reliable and robust cybersecurity, underpinned by a strong research and translation system.
Trust is essential for growing and maintaining participation in the digital society. Organisations earn trust by acting in a trustworthy manner: building systems that are reliable and secure, treating people, their privacy and their data with respect, and providing credible and comprehensible information to help people understand how secure they are.
Resilience, the ability to function, adapt, grow, learn and transform under stress or in the face of shocks, will help organisations deliver systems that are reliable and secure. Resilient organisations can better protect their customers, provide more useful products and services, and earn people’s trust.
Research and innovation in industry and academia will continue to make important contributions to creating this resilient and trusted digital environment. Research can illuminate how best to build, assess and improve digital systems, integrating insights from different disciplines, sectors and around the globe. It can also generate advances to help cybersecurity keep up with the continued evolution of cyber risks.
Translation of innovative ideas and approaches from research will create a strong supply of reliable, proven solutions to difficult to predict cybersecurity risks. This is best achieved by maximising the diversity and number of innovations that see the light of day as products.
Policy, practice and research will all need to adapt. The recommendations made in this report seek to set up a trustworthy, self-improving and resilient digital environment that can thrive in the face of unanticipated threats, and earn the trust people place in it.
Innovation and research will be particularly important to the UK’s economy as it establishes a new relationship with the EU. Cybersecurity delivers important economic benefits, both by underpinning the digital foundations of UK business and trade and also through innovation that feeds directly into growth. The findings of this report will be relevant regardless of how the UK’s relationship to the EU changes.
Headline recommendations
● Trust: Governments must commit to preserving the robustness of encryption, including end-to-end encryption, and promoting its widespread use. Encryption is a foundational security technology that is needed to build user trust, improve security standards and fully realise the benefits of digital systems.
● Resilience: Government should commission an independent review of the UK’s future cybersecurity needs, focused on the institutional structures needed to support resilient and trustworthy digital systems in the medium and longer term. A self-improving, resilient digital environment will need to be guided and governed by institutions that are transparent, expert and have a clear and widely-understood remit.
● Research: A step change in cybersecurity research and practice should be pursued; it will require a new approach to research, focused on identifying ambitious high-level goals and enabling excellent researchers to pursue those ambitions. This would build on the UK's existing strengths in many aspects of cybersecurity research and ultimately help build a resilient and trusted digital sector based on excellent research and world-class expertise.
● Translation: The UK should promote a free and unencumbered flow of cybersecurity ideas from research to practical use and support approaches that have public benefits beyond their short term financial return. The unanticipated nature of future cyber threats means that a diverse set of cybersecurity ideas and approaches will be needed to build resilience and adaptivity. Many of the most valuable ideas will have broad security benefits for the public, beyond any direct financial returns.

Hajautetun automaation käyttö osana simulaatiota

Työssä perehdytään simulaatiotekniikkaan, jossa käytetään osana fyysistä laitteistoa, ja siihen tarvittaviin komponentteihin, kuten ohjelmistorajapintoihin sekä kenttäväylään. Työssä tutustutaan myös IEC 61131-3 ja IEC 61499 -standardien mukaisiin toimintolohkomalleihin, joita käytetään automaatiossa. Näiden perusteella kehitetään järjestelmä, jonka avulla Simulink-ympäristössä voidaan oman toimintolohkon avulla käyttää taajuusmuuttajaa osana simulaatiota. Tällaisen reaaliaikaisen systeemin eri osien väliseen synkronointiin kiinnitetään myös huomiota. Järjestelmää testataan simulaatiomallilla, jossa syötetään vääntömomenttiohje taajuusmuuttajalle, joka mittaa siihen kytketyn moottorin pyörimisnopeuden. Mallilla voidaan esimerkiksi arvioida kuorman hitausmomentti. Työssä tutustutaan myös taajuusmuuttajien ohjelmallisiin ominaisuuksiin ja niiden perusteella pohditaan esitetyn kaltaisten järjestelmien käyttöä hajautettuna automaatiojärjestelmänä. Kokeellinen työ tehtiin säätö- ja digitaalitekniikan laboratoriossa vuoden 2010 aikana.

A novel continuous pitch electronic wind instrument controller

We present a design for an electronic continuous pitch wind controller for musical performance. It uses a combination of linear position, magnetic reed, and air pressure sensors to generate three fully continuous control dimensions. Each control dimension is encoded and transmitted using the industry standard MIDI protocol to allow the instrument to interface with a large variety of synthesizers to control different parameters of the synthesis algorithm in real time, allowing for a high degree of expressiveness not possible with existing electronic wind instrument controllers. The first part of the thesis will provide a justification for the design of a novel instrument, and present some of the theory behind pitch representation, encoding, and transmission with respect to digital systems. The remainder of the thesis will present the particular design and explain the workings of its various subsystems.

Les facteurs affectant les taux de réussite des cours d’anglais et de sciences humaines des étudiants dans les programmes de formation technique

A large percentage of Vanier College's technology students do not attain their College degrees within the scheduled three years of their program. A closer investigation of the problem revealed that in many of these cases these students had completed all of their program professional courses but they had not completed all of the required English and/or Humanities courses. Fortunately, most of these students do extend their stay at the college for the one or more semesters required for graduation, although some choose to go on into the workforce without returning to complete the missing English and/or Humanities and without their College Degrees. The purpose of this research was to discover if there was any significant measure of association between a student's family linguistic background, family cultural background, high school average, and/or College English Placement Test results and his or her likelihood of succeeding in his or her English and/or Humanities courses within the scheduled three years of the program. Because of both demographic differences between 'hard' and 'soft' technologies, including student population, more specifically gender ratios and student average ages in specific programs; and program differences, including program writing requirements and types of practical skill activities required; in order to have a more uniform sample, the research was limited to the hard technologies where students work hands-on with hardware and/or computers and tend to have overall low research and writing requirements. Based on a review of current literature and observations made in one of the hard technology programs at Vanier College, eight research questions were developed. These questions were designed to examine different aspects of success in the English and Humanities courses such as failure and completion rates and the number of courses remaining after the end of the fifth semester and as well examine how the students assessed their ability to communicate in English. The eight research questions were broken down into a total of 54 hypotheses. The high number of hypotheses was required to address a total of seven independent variables: primary home language, high school language of instruction, student's place of birth (Canada, Not-Canada), student's parents' place of birth (Both-born-in-Canada, Not-both-born-in-Canada), high school averages and English placement level (as a result of the College English Entry Test); and eleven dependent variables: number of English completed, number of English failed, whether all English were completed by the end of the 5th semester (yes, no), number of Humanities courses completed, number of Humanities courses failed, whether all the Humanities courses were completed by the end of the 5th semester (yes, no), the total number of English and Humanities courses left, and the students' assessments of their ability to speak, read and write in English. The data required to address the hypotheses were collected from two sources, from the students themselves and from the College. Fifth and sixth semester students from Building Engineering Systems, Computer and Digital Systems, Computer Science and Industrial Electronics Technology Programs were surveyed to collect personal information including family cultural and linguistic history and current language usages, high school language of instruction, perceived fluency in speaking, reading and writing in English and perceived difficulty in completing English and Humanities courses. The College was able to provide current academic information on each of the students, including copies of college program planners and transcripts, and high school transcripts for students who attended a high school in Quebec. Quantitative analyses were done on the data using the SPSS statistical analysis program. Of the fifty-four hypotheses analysed, in fourteen cases the results supported the research hypotheses, in the forty other cases the null hypotheses had to be accepted. One of the findings was that there was a strong significant association between a student's primary home language and place of birth and his or her perception of his or her ability to communicate in English (speak, read, and write) signifying that both students whose primary home language was not English and students who were not born in Canada, considered themselves, on average, to be weaker in these skills than did students whose primary home language was English. Although this finding was noteworthy, the two most significant findings were the association found between a student's English entry placement level and the number of English courses failed and the association between the parents' place of birth and the student's likelihood of succeeding in both his or her English and Humanities courses. According to the research results, the mean number of English courses failed, on average, by students placed in the lowest entry level of College English was significantly different from the number of English courses failed by students placed in any of the other entry level English courses. In this sample students who were placed in the lowest entry level of College English failed, on average, at least three times as many English courses as those placed in any of the other English entry level courses. These results are significant enough that they will be brought to the attention of the appropriate College administration. The results of this research also appeared to indicate that the most significant determining factor in a student's likelihood of completing his or her English and Humanities courses is his or her parents' place of birth (both-born-in-Canada or not-both-born-in-Canada). Students who had at least one parent who was not born in Canada, would, on average, fail a significantly higher number of English courses, be significantly more likely to still have at least one English course left to complete by the end of the 5th semester, fail a significantly higher number of Humanities courses, be significantly more likely to still have at least one Humanities course to complete by the end of the 5th semester and have significantly more combined English and Humanities courses to complete at the end of their 5th semester than students with both parents born in Canada. This strong association between students' parents' place of birth and their likelihood of succeeding in their English and Humanities courses within the three years of their program appears to indicate that acculturation may be a more significant factor than either language or high school averages, for which no significant association was found for any of the English and Humanities related dependent variables. Although the sample size for this research was only 60 students and more research needs to be conducted in this area, to see if these results are supported with other groups within the College, these results are still significant. If the College can identify, at admission, the students who will be more likely to have difficulty in completing their English and Humanities courses, the College will now have the opportunity to intercede during or before the first semester, and offer these students the support they require in order to increase their chances of success in their education, whether it be classes or courses designed to meet their specific needs, special mentoring, tutoring or other forms of support. With the necessary support, the identified students will have a greater opportunity of successfully completing their programs within the scheduled three years, while at the same time the College will have improved its capacity to meeting the needs of its students.

Alternative systems for Intellectual Property in the digital age

This paper investigates the current turbulent state of copyright in the digital age, and explores the viability of alternative compensation systems that aim to achieve the same goals with fewer negative consequences for consumers and artists. To sustain existing business models associated with creative content, increased recourse to DRM (Digital Rights Management) technologies, designed to restrict access to and usage of digital content, is well underway. Considerable technical challenges associated with DRM systems necessitate increasingly aggressive recourse to the law. A number of controversial aspects of copyright enforcement are discussed and contrasted with those inherent in levy based compensation systems. Lateral exploration of the copyright dilemma may help prevent some undesirable societal impacts, but with powerful coalitions of creative, consumer electronics and information technology industries having enormous vested interest in current models, alternative schemes are frequently treated dismissively. This paper focuses on consideration of alternative models that better suit the digital era whilst achieving a more even balance in the copyright bargain.

RCA method for fault diagnosis in digital substations of power systems

The authors present a Cause-Effect fault diagnosis model, which utilises the Root Cause Analysis approach and takes into account the technical features of a digital substation. The Dempster/Shafer evidence theory is used to integrate different types of fault information in the diagnosis model so as to implement a hierarchical, systematic and comprehensive diagnosis based on the logic relationship between the parent and child nodes such as transformer/circuit-breaker/transmission-line, and between the root and child causes. A real fault scenario is investigated in the case study to demonstrate the developed approach in diagnosing malfunction of protective relays and/or circuit breakers, miss or false alarms, and other commonly encountered faults at a modern digital substation.

Exchanging data between Digital Human Modelling systems : a review of data formats

Digital human modeling (DHM) systems underwent significant development within the last years. They achieved constantly growing importance in the field of ergonomic workplace design, product development, product usability, ergonomic research, ergonomic education, audiovisual marketing and the entertainment industry. They help to design ergonomic products as well as healthy and safe socio-technical work systems. In the domain of scientific DHM systems, no industry specific standard interfaces are defined which could facilitate the exchange of 3D solid body data, anthropometric data or motion data. The focus of this article is to provide an overview of requirements for a reliable data exchange between different DHM systems in order to identify suitable file formats. Examples from the literature are discussed in detail. Methods: As a first step a literature review is conducted on existing studies and file formats for exchanging data between different DHM systems. The found file formats can be structured into different categories: static 3D solid body data exchange, anthropometric data exchange, motion data exchange and comprehensive data exchange. Each file format is discussed and advantages as well as disadvantages for the DHM context are pointed out. Case studies are furthermore presented, which show first approaches to exchange data between DHM systems. Lessons learnt are shortly summarized. Results: A selection of suitable file formats for data exchange between DHM systems is determined from the literature review.

Built heritage management systems : the framework of a digital tool for the conservation of Brisbane City Hall

Brisbane City Hall (BCH) is arguably one of Brisbane’s most notable and iconic buildings. Serving as the public’s central civic and municipal building since 1930, the importance of this heritage listed building to cultural significance and identity is unquestionable. This attribute is reflected within the local government, with a simplified image of the halls main portico entrance supplying Brisbane City Council with its insignia and trademark signifier. Regardless of these qualities, this building has been neglected in a number of ways, primarily in the physical sense with built materials, but also, and just as importantly, through inaccurate and undocumented works. Numerous restoration and renovation works have been undertaken throughout BCH’s lifetime, however the records of these amendments are far and few between. Between 2010 and 2013, BCH underwent major restoration works, the largest production project undertaken on the building since its initial construction. Just prior to this conservation process, the full extent of the buildings deterioration was identified, much of which there was little to no original documentation of. This has led to a number of issues pertaining to what investigators expected to find within the building, versus what was uncovered (the unexpected), which have resulted directly from this lack of data. This absence of record keeping is the key factor that has contributed to the decay and unknown deficiencies that had amassed within BCH. Accordingly, this raises a debate about the methods of record keeping, and the need for a more advanced process that is able to be integrated within architectural and engineering programs, whilst still maintaining the ability to act as a standalone database. The immediate objective of this research is to investigate the restoration process of BCH, with focus on the auditorium, to evaluate possible strategies to record and manage data connected to building pathology so that a framework can be developed for a digital heritage management system. The framework produced for this digital tool will enable dynamic uses of a centralised database and aims to reduce the significant data loss. Following an in-depth analysis of this framework, it can be concluded that the implementation of the suggested digital tool would directly benefit BCH, and could ultimately be incorporated into a number of heritage related built form.

Customer agility, smart shopping apps and their implications: Customer relationship management systems in the digital age

This thesis examines the complementarities and vulnerabilities of customer connectivity that contemporary firms achieved through ubiquitous digital technologies. Taking the example of deployment of smart shopping apps to connect with consumers in the context of Australian retail, the study examines how such customer connectivity positively influences firm performances through firm's customer agility whilst creating implications for firms' digital business strategy through altered customer cognitions. Employing Oliver's (1977) Expectation Confirmation Theory, this study empirically tests a conceptual model involving digital connectivity, digital expectations, experiences and satisfaction of the customers who uses smart shopping apps in Australian consumer retail.

Dynamic Digital Simulation of HVDC Systems Using a Novel Modular Converter Model

This paper describes a method for the dynamic digital simulation of HVDC transmission systems. The method employs a novel modular converter representation during both normal and abnormal conditions.