Final Report of the Phase III Archaeological Investigations at the Dr. Upton Scott House (18AP18), Annapolis, Anne Arundel County, Maryland, 1998-1999

In the summers of 1998 and 1999, the Archaeology in Annapolis project carried out archaeological investigation at the eighteenth century Dr. Upton Scott House site (18AP18)located at 4 Shipwright Street in the historic district of Annapolis, Anne Arundel County, Maryland. The Upton Scott House is significant as one of only a few Georgian houses with remnants of its original plantation-inspired landscape still visible (Graham 1998:147). Investigation was completed in agreement with the owners of the historic property, Mr. and Mrs. Paul Christian, who were interested in determining the condition and arrangement of Dr. Upton Scott’s well-documented pleasure gardens. Betty Cosans’ 1972 Archaeological Feasibility Report, the first real archaeological study of the Upton Scott House site, guided the research design and recovery efforts. Cosans determined that testing and survey in the back and side yards of the Scott property would yield important information on the use and history of the property, including that of Scott’s famous gardens. Excavation units and trenches were placed within three separate areas of backyard activity on the site which included Area One: extant brick stables in the southwest of the property; Area Two: the brick foundations of a small outbuilding located in the northwest area of the site; and Area Three: the area of Scott’s formal gardens. The research design included an interest in recovering evidence of African-American spiritual practice and domestic life at the site. Also of significant importance was an analysis of Scott’s garden beds, concerning the order and layout. Also sought was an understanding of the change in perception and use of the backyard by the various owners of the property.

Engineering source/drain extension regions in nanoscale double gate (DG) SOI MOSFETs: Analytical model and design considerations

In this paper, we propose for the first time, an analytical model for short channel effects in nanoscale source/drain extension region engineered double gate (DG) SOI MOSFETs. The impact of (i) lateral source/drain doping gradient (d), (ii) spacer width (s), (iii) spacer to doping gradient ratio (s/d) and (iv) silicon film thickness (T-si), on short channel effects - threshold voltage (V-th) and subthreshold slope (S), on-current (I-on), off-current (I-on) and I-on/I-off is extensively analysed by using the analytical model and 2D device simulations. The results of the analytical model confirm well with simulated data over the entire range of spacer widths, doping gradients and effective channel lengths. Results show that lateral source/drain doping gradient along with spacer width can not only effectively control short channel effects, thus presenting low off-current, but can also be optimised to achieve high values of on-currents. The present work provides valuable design insights in the performance of nanoscale DG Sol devices with optimal source/drain engineering and serves as a tool to optimise important device and technological parameters for 65 nm technology node and below. (c) 2006 Elsevier Ltd. All rights reserved.

Imidazo[4,5-f]-1,10-phenanthrolines: Versatile ligands for the design of metallomesogens

2-Aryl-substituted imidazo[4,5-f]-1,10-phenanthrolines were used as building blocks for metal-containing liquid crystals (metallomesogens). Imidazo[4,5-f]-1,10-phenanthrolines are versatile ligands because they can form stable complexes with various d-block transition metals, including platinum(II) and rhenium(I), as well as with lanthanide(III) and uranyl ions and they can easily be structurally modified by a judicious choice of benzaldehyde precursor. None of the ligands designed for this study were liquid-crystalline. However, mesomorphism could be induced by their coordination to various metallic fragments. The thermal behavior of the metal complexes depended on the metal-to-ligand ratio and the substitution pattern of the coordinating ligands. Complexes with a metal-to-ligand ratio of 1:1 [ML, with M = Pt(II), Re(I)] were not liquid-crystal line. The lanthanide(III) complexes with a metal-to-ligand ratio of 1:2 [ML2 with M = Ln(III)] formed an enantiotropic cubic mesophase or were not liquid-crystalline, depending on the nature of the lanthanide(III) ion and the substitution pattern of the ligands. A 1:3 uranyl complex of the type [ML3](2+) exhibited a hexagonal columnar mesophase over a broad temperature range. Self-assembled monolayers of a europium(III) complex were investigated by scanning tunneling microscopy, which revealed that the complex formed well-ordered structures over long distances at the 1-octanoic acid-graphite interface. The rhenium(I) complexes and the europium(III) complexes with 2-thenoyl-trifluoroacetonate or dibenzoylmethanate and imidazo[4,5-f]-1,10-phenanthroline showed good luminescence properties.

Learning design contingent valuation (LDCV): NOAA guidelines, preference learning and coherent arbitrariness

We extend the contingent valuation (CV) method to test three differing conceptions of individuals' preferences as either (i) a-priori well-formed or readily divined and revealed through a single dichotomous choice question (as per the NOAA CV guidelines [K. Arrow, R. Solow, P.R. Portney, E.E. Learner, R. Radner, H. Schuman, Report of the NOAA panel on contingent valuation, Fed. Reg. 58 (1993) 4601-4614]); (ii) learned or 'discovered' through a process of repetition and experience [J.A. List, Does market experience eliminate market anomalies? Q. J. Econ. (2003) 41-72; C.R. Plott, Rational individual behaviour in markets and social choice processes: the discovered preference hypothesis, in: K. Arrow, E. Colombatto, M. Perleman, C. Schmidt (Eds.), Rational Foundations of Economic Behaviour, Macmillan, London, St. Martin's, New York, 1996, pp. 225-250]; (iii) internally coherent but strongly influenced by some initial arbitrary anchor [D. Ariely, G. Loewenstein, D. Prelec, 'Coherent arbitrariness': stable demand curves without stable preferences, Q. J. Econ. 118(l) (2003) 73-105]. Findings reject both the first and last of these conceptions in favour of a model in which preferences converge towards standard expectations through a process of repetition and learning. In doing so, we show that such a 'learning design CV method overturns the 'stylised facts' of bias and anchoring within the double bound dichotomous choice elicitation format. (C) 2007 Elsevier Inc. All rights reserved.

Prognostic Significance of TRAIL Signaling Molecules in Stage II and III Colorectal Cancer

Purpose: We previously found that cellular FLICE-inhibitory protein (c-FLIP), caspase 8, and tumor necrosis factor–related apoptosis-inducing ligand (TRAIL) receptor 2 (DR5) are major regulators of cell viability and chemotherapy-induced apoptosis in colorectal cancer. In this study, we determined the prognostic significance of c-FLIP, caspase 8, TRAIL and DR5 expression in tissues from patients with stage II and III colorectal cancer.

Experimental Design: Tissue microarrays were constructed from matched normal and tumor tissue derived from patients (n = 253) enrolled in a phase III trial of adjuvant 5-fluorouracil–based chemotherapy versus postoperative observation alone. TRAIL, DR5, caspase 8, and c-FLIP expression levels were determined by immunohistochemistry.

Results: Colorectal tumors displayed significantly higher expression levels of c-FLIP (P < 0.001), caspase 8 (P = 0.01), and DR5 (P < 0.001), but lower levels of TRAIL (P < 0.001) compared with matched normal tissue. In univariate analysis, higher TRAIL expression in the tumor was associated with worse overall survival (P = 0.026), with a trend to decreased relapse-free survival (RFS; P = 0.06), and higher tumor c-FLIP expression was associated with a significantly decreased RFS (P = 0.015). Using multivariate predictive modeling for RFS in all patients and including all biomarkers, age, treatment, and stage, we found that the model was significant when the mean tumor c-FLIP expression score and disease stage were included (P < 0.001). As regards overall survival, the overall model was predictive when both TRAIL expression and disease stage were included (P < 0.001).

Conclusions: High c-FLIP and TRAIL expression may be independent adverse prognostic markers in stage II and III colorectal cancer and might identify patients most at risk of relapse.

Tissue biomarker development in a multicentre trial context: a feasibility study on the PETACC3 stage II and III colon cancer adjuvant treatment trial.

Purpose: We evaluated the feasibility of biomarker development in the context of multicenter clinical trials.

Experimental Design: Formalin-fixed, paraffin-embedded (FFPE) tissue samples were collected from a prospective adjuvant colon cancer trial (PETACC3). DNA was isolated from tumor as well as normal tissue and used for analysis of microsatellite instability, KRAS and BRAF genotyping, UGT1A1 genotyping, and loss of heterozygosity of 18 q loci. Immunohistochemistry was used to test expression of TERT, SMAD4, p53, and TYMS. Messenger RNA was retrieved and tested for use in expression profiling experiments.

Results: Of the 3,278 patients entered in the study, FFPE blocks were obtained from 1,564 patients coming from 368 different centers in 31 countries. In over 95% of the samples, genomic DNA tests yielded a reliable result. Of the immmunohistochemical tests, p53 and SMAD4 staining did best with reliable results in over 85% of the cases. TERT was the most problematic test with 46% of failures, mostly due to insufficient tissue processing quality. Good quality mRNA was obtained, usable in expression profiling experiments.

Conclusions: Prospective clinical trials can be used as framework for biomarker development using routinely processed FFPE tissues. Our results support the notion that as a rule, translational studies based on FFPE should be included in prospective clinical trials.

Oligomerisation of linear 1-olefins using a chlorogallate(III) ionic liquid

A Lewis acidic chlorogallate(III) ionic liquid, 1-ethyl-3-methylimidazolium hepta-chlorodigallate(III), [C(2)mim][Ga2Cl7], was successfully used to oligomerise 1-pentene. The influence of temperature, time, catalyst concentration, and stirring rate on conversion and product distribution was modelled using a design of experiment (DoE) approach (chemometrics). The process was optimised for lubricant base oils production; the C20-C50 fraction (where Cn indicates the number of carbons in the oligomer) was maximised, while the heavier oligomer fraction (>C50) was minimised.

Design and implementation of the symmetrically extended 2-D wavelet transform

The inclusion of the Discrete Wavelet Transform in the JPEG-2000 standard has added impetus to the research of hardware architectures for the two-dimensional wavelet transform. In this paper, a VLSI architecture for performing the symmetrically extended two-dimensional transform is presented. This architecture conforms to the JPEG-2000 standard and is capable of near-optimal performance when dealing with the image boundaries. The architecture also achieves efficient processor utilization. Implementation results based on a Xilinx Virtex-2 FPGA device are included.

Influence of the experimental design of gene expression studies on the inference of gene regulatory networks: environmental factors

The inference of gene regulatory networks gained within recent years a considerable interest in the biology and biomedical community. The purpose of this paper is to investigate the influence that environmental conditions can exhibit on the inference performance of network inference algorithms. Specifically, we study five network inference methods, Aracne, BC3NET, CLR, C3NET and MRNET, and compare the results for three different conditions: (I) observational gene expression data: normal environmental condition, (II) interventional gene expression data: growth in rich media, (III) interventional gene expression data: normal environmental condition interrupted by a positive spike-in stimulation. Overall, we find that different statistical inference methods lead to comparable, but condition-specific results. Further, our results suggest that non-steady-state data enhance the inferability of regulatory networks.

Evaluating Many Treatments and Biomarkers in Oncology: A New Design

There is a pressing need for more-efficient trial designs for biomarker-stratified clinical trials. We suggest a new approach to trial design that links novel treatment evaluation with the concurrent evaluation of a biomarker within a confirmatory phase II/III trial setting. We describe a new protocol using this approach in advanced colorectal cancer called FOCUS4. The protocol will ultimately answer three research questions for a number of treatments and biomarkers: (1) After a period of first-line chemotherapy, do targeted novel therapies provide signals of activity in different biomarker-defined populations? (2) If so, do these definitively improve outcomes? (3) Is evidence of activity restricted to the biomarker-defined groups? The protocol randomizes novel agents against placebo concurrently across a number of different biomarker-defined population-enriched cohorts: BRAF mutation; activated AKT pathway: PI3K mutation/absolute PTEN loss tumors; KRAS and NRAS mutations; and wild type at all the mentioned genes. Within each biomarker-defined population, the trial uses a multistaged approach with flexibility to adapt in response to planned interim analyses for lack of activity. FOCUS4 is the first test of a protocol that assigns all patients with metastatic colorectal cancer to one of a number of parallel population-enriched, biomarker-stratified randomized trials. Using this approach allows questions regarding efficacy and safety of multiple novel therapies to be answered in a relatively quick and efficient manner, while also allowing for the assessment of biomarkers to help target treatment.

Experimental design and batch experiments for optimization of Cr(VI) removal from aqueous solutions by hydrous cerium oxide nanoparticles

Hydrous cerium oxide (HCO) was synthesized by intercalation of solutions of cerium(III) nitrate and sodium hydroxide and evaluated as an adsorbent for the removal of hexavalent chromium from aqueous solutions. Simple batch experiments and a 2⁵ factorial experimental design were employed to screen the variables affecting Cr(VI) removal efficiency. The effects of the process variables; solution pH, initial Cr(VI) concentration, temperature, adsorbent dose and ionic strength were examined. Using the experimental results, a linear mathematical model representing the influence of the different variables and their interactions was obtained. Analysis of variance (ANOVA) demonstrated that Cr(VI) adsorption significantly increases with decreased solution pH, initial concentration and amount of adsorbent used (dose), but slightly decreased with an increase in temperature and ionic strength. The optimization study indicates 99% as the maximum removal at pH 2, 20 °C, 1.923 mM of metal concentration and a sorbent dose of 4 g/dm³. At these optimal conditions, Langmuir, Freundlich and Redlich–Peterson isotherm models were obtained. The maximum adsorption capacity of Cr(VI) adsorbed by HCO was 0.828 mmol/g, calculated by the Langmuir isotherm model. Desorption of chromium indicated that the HCO adsorbent can be regenerated using NaOH solution 0.1 M (up to 85%). The adsorption interactions between the surface sites of HCO and the Cr(VI) ions were found to be a combined effect of both anion exchange and surface complexation with the formation of an inner-sphere complex.

Testing preference formation in learning design contingent valuation (LDCV) using advanced information and repetitive treatments

Policymakers have largely replaced Single Bounded Discrete Choice (SBDC) valuation by the more statistically efficient repetitive methods; Double Bounded Discrete Choice (DBDC) and Discrete Choice Experiments (DCE) . Repetitive valuation permits classification into rational preferences: (i) a priori well-formed; (ii) consistent non-arbitrary values “discovered” through repetition and experience; (Plott, 1996; List 2003) and irrational preferences; (iii) consistent but arbitrary values as “shaped” by preceding bid level (Tufano, 2010; Ariely et al., 2003) and (iv) inconsistent and arbitrary values. Policy valuations should demonstrate behaviorally rational preferences. We outline novel methods for testing this in DBDC applied to renewable energy premiums in Chile.

Do design de interação ao design da experiência tecnologicamente (i)mediata

Partindo da ideia de ʻDesign Globalʼ e tendo como pano de fundo a emergência e consolidação de novos paradigmas de interação baseados numa relação mais direta entre o corpo e os conteúdos digitais, a presente tese aborda a questão da (re)qualificação da experiência humana tecnologicamente mediada do ponto de vista do Design, designadamente do Design de Interação e do Design da Experiência. Neste contexto, a noção de ʻexperiência tecnologicamente (i)mediadaʼ representa uma ação humana que é, simultaneamente, mediada (do ponto de vista técnico) e direta ou imediada (do ponto de vista da percepção) entre o ser e a sua ação no mundo. Dado o objecto de estudo ser a experiência real que os objetos e dispositivos técnicos convocam designadamente na vida quotidiana, o nosso estudo implica toda a dinâmica holística da relação singular – racional, emocional, estética e projetiva – do ser com o seu mundo. Desse modo, defende-se a necessidade de enquadrar a raiz do pensamento e ação em Design numa hermenêutica fenomenológica e ontológica do projeto. Esta tese visa desta forma contribuir para apuramento e consolidação de uma praxis transdisciplinar para os designers e restantes intervenientes do processo do Design, cujo desígnio é a (re)qualificação da experiência que os artefactos e dispositivos técnicos convocam, assim como na apropriação e vínculo que a pessoa estabelece com estes. O resultado deste estudo sintetiza-se nos seguintes objetivos: 1. no desenvolvimento de conceitos operativos que estruturem o pensamento de uma Filosofia da Ação em Design com base numa prática que designamos por “design centrado-no-ser”; 2. na reflexão da experiência tecnológica através do conceito do estado de fluxo de Mihaly Csikszentmihalyi, enquadrando essa tipologia de experiências no contexto de uma vida, ou seja, no projeto de um eu; 3. na problematização da (re)qualificação da experiência técnica numa perspetiva de vida mais alargada que envolve o princípio de simetria entre ação ética e ação estética no pensamento e prática em Design; 4. na definição de um quadro de ações que manifesta a aplicabilidade dos conceitos desenvolvidos no ensino, investigação e prática do Design.

Smart design of scaffolds obtained by biofabrication for tissue engineering applications

A engenharia de tecidos é um domínio tecnológico emergente em rápido desenvolvimento que se destina a produzir substitutos viáveis para a restauração, manutenção ou melhoria da função dos tecidos ou órgãos humanos. Uma das estratégias mais predominantes em engenharia de tecidos envolve crescimento celular sobre matrizes de suporte (scaffolds), biocompatíveis e biodegradáveis. Estas matrizes devem possuir não só elevadas propriedades mecânicas e vasculares, mas também uma elevada porosidade. Devido à incompatibilidade destes dois parâmetros, é necessário desenvolver estratégias de simulação de forma a obter estruturas optimizadas. A previsão real das propriedades mecânicas, vasculares e topológicas das matrizes de suporte, produzidas por técnicas de biofabricação, é muito importante para as diversas aplicações em engenharia de tecidos. A presente dissertação apresenta o estado da arte da engenharia de tecidos, bem como as técnicas de biofabricação envolvidas na produção de matrizes de suporte. Para o design optimizado de matrizes de suporte foi adoptada uma metodologia de design baseada tanto em métodos de elementos finitos para o cálculo do comportamento mecânico, vascular e as optimizações topológicas, como em métodos analíticos para a validação das simulações estruturais utilizando dados experimentais. Considerando que as matrizes de suporte são estruturas elementares do tipo LEGO, dois tipos de famílias foram consideradas, superfícies não periódicas e as superfícies triplas periódicas que descrevem superfícies naturais. Os objectivos principais desta dissertação são: i) avaliar as técnicas existentes de engenharia de tecidos; ii) avaliar as técnicas existentes de biofabricação para a produção de matrizes de suporte; iii) avaliar o desempenho e comportamento das matrizes de suporte; iv) implementar uma metodologia de design de matrizes de suporte em variáveis tais como a porosidade, geometria e comportamento mecânico e vascular por forma a auxiliar o processo de design; e por fim, v) validar experimentalmente a metodologia adoptada.

Avaliação da gestão curricular da matemática : cursos profissionais III

No mundo do trabalho, designadamente na indústria, acentua-se o défice de competências matemáticas nos profissionais da indústria, particularmente a Modelação Matemática, facto que constitui uma preocupação crescente à escala mundial e, obviamente, do sistema educativo português e da comunidade matemática nacional. Este défice é justificado pela falta de formação dos professores em contexto industrial e, de acordo com a National Council of Teachers of Mathematics, pela incapacidade que muitos docentes têm em apresentar a Matemática aplicada a situações laborais. Face à relevância social, económica e política da problemática descrita, centrou-se o presente estudo na Avaliação da Gestão Curricular da Matemática nos Cursos Profissionais de nível III do ensino secundário em Portugal, com enfoque na Modelação Matemática que, segundo os referentes internacionais, é simultaneamente uma competência e uma metodologia de ensino promotora do desenvolvimento de competências matemáticas nos profissionais da indústria. No contexto da gestão do currículo da Matemática para os cursos profissionais de nível III em escolas secundárias portuguesas, desenvolveu-se o presente estudo para se responder à questão de investigação: Em que medida a gestão curricular da Matemática, instituída, intencional e implementada nos cursos profissionais de nível III contempla situações-problema, suscetíveis de promover o desenvolvimento de competências no aluno, relevantes para o seu desempenho profissional? Construiu-se um referencial de avaliação, centrado na dimensão ecológica, segundo o modelo teórico Enfoque Ontosemiótico, abarcando um conjunto de sub-dimensões sobre as quais foram definidos critérios e respetivos indicadores. De realçar, ainda, que o referencial, além de ter servido de instrumento de avaliação da gestão curricular da Matemática nos cursos profissionais de nível III do ensino secundário, serviu, também, como guia orientador no desenho das sete situações-problema de natureza de Modelação Matemática no estudo de funções. O enquadramento metodológico do presente estudo assentou no método Estudo de Caso. Para analisar o caso, selecionaram-se sete unidades integradas de análise, a saber: a gestão curricular da Matemática de cada um dos seis professores participantes e a gestão curricular da Matemática instituída pelos normativos oficiais (programa da componente de formação científica da disciplina de Matemática para os cursos profissionais). Para a análise dos dados empíricos, respeitantes à gestão instituída, recorreuse à análise de conteúdo e teve essencialmente como propósito avaliar em que medida as orientações curriculares, emanadas no Programa da componente de formação científica disciplina de Matemática para os cursos profissionais de nível III, estão em conformidade com os referenciais teóricos. Sequencialmente, a operacionalização da avaliação intencional consubstanciou-se nos planos das aulas cedidos previamente a cada observação. A análise de conteúdo, como técnica de tratamento dos dados empíricos, foi a forma de se aceder às intenções de cada professor participante no estudo. A observação de aulas sucedeu à avaliação do plano de aula, constituindo a forma de avaliar in loco a gestão curricular da Matemática implementada, permitindo avaliar a coerência das observações com as intenções expressas nas planificações. Os registos das observações foram concretizados sob a forma de notas de campo que incluem uma componente descritiva e outra reflexiva que se dirigem para a análise dos dados empíricos recolhidos. Em termos de resultados, a avaliação da gestão curricular instituída foi reveladora de que o postulado pelos referentes para o desenvolvimento de competências tem a sua representação nas orientações curriculares expressas no Programa da componente de formação científica da disciplina de Matemática para os cursos profissionais de nível III. Contrariamente, a gestão curricular da Matemática pelos professores participantes revelou-se muito condicionada ao cumprimento dos conteúdos propostos pelo programa da disciplina. Por conseguinte, a gestão curricular da Matemática por competências, enfatizada no Programa (gestão instituída), encontrou, neste estudo, pouca tradução na gestão curricular intencional e implementada dos professores participantes, na medida em que a mesma não refletiu uma articulação com a componente de formação técnica do curso, visando uma metodologia proactiva no desenho de situações-problema promotoras de desenvolver, nos alunos, competências profícuas para a sua profissão, nomeadamente a Modelação Matemática. De salientar, ainda, que uma percentagem muito significativa de situações-problema propostas pelos professores não são, no geral, pertinentes para os respetivos cursos, não sendo, neste sentido, promotoras do estabelecimento de ligação com a futura performance profissional dos alunos. Tal lacuna parece ter resultado da ausência de trabalho colaborativo entre os professores de Matemática e os restantes docentes que constituem a equipa formativa do curso, lacuna que dificulta a articulação e coordenação em prol de um ensino contextualizado, ou ainda pela ausência de formação contínua pelos professores, no âmbito de temáticas inerentes à gestão curricular a cursos profissionais.