Changes in sodium, potassium-ATPase induced by repeated fencamfamine: the roles of cyclic AMP-dependent protein kinase and the nitric oxide-cyclic GMP pathway

Fencamfamine (FCF) is an indirect dopamine agent with effects similar to amphetamine and cocaine. In the present study, we investigate changes in Na,K-ATPase, cyclic AMP-dependent protein kinase (PKA) and nitric oxide synthase (NOS) activity and cyclic GMP levels in the nucleus accumbens (NAc) and striatum (ST) of animals acutely or repeatedly treated with FCF (3.5 mg/kg). Na,K-ATPase had a similar activity in control and repeatedly treated animals, but was reduced in the NAc of the acute group. This enzyme was reduced in the ST in acute and repeatedly treated animals, compared to the control group. Expression of the alpha(1,2,3)-Na,K-ATPase isoforms in the NAc and the ST was not altered in all groups studied. Acute FCF induced a significant increase in PKA activity in both the ST and the NAc. Repeatedly treated animals showed a higher increase in PKA activity in the NAc, but not in the ST, when compared to the acute group. There was also an increase in both NOS activity and cyclic GMP levels only in the NAc of FCF repeatedly treated animals compared to the acute and control groups. We suggest that chronic FCF treatment is linked to a modification in Na,K-ATPase activity through the PKA and NO-cyclic GMP pathway. (C) 2003 Elsevier Ltd. All rights reserved.

Determination of absolute configuration of 1,3-diols by the modified Mosher's method using their di-MTPA esters

1,3-Diols are frequently involved in biologically important compounds and, therefore, determination of the stereochemistry of these structural elements, in particular those in acyclic systems, has been one of the focuses of attention in natural products chemistry. The modified Mosher's method, commonly used for the determination of the absolute configuration of secondary alcohols, was applied to determine the absolute configuration of 1,3-diols with their di-MTPA esters. Several epimeric pairs of syn- and anti-1,3-diols with known absolute configurations were converted to the corresponding di-MTPA esters and the Delta delta values were then calculated. For the acyclic syn-1,3-diols, the Delta delta values were systematically arranged as predicted from the basic concept of the modified Mosher's method, demonstrating that the method is valid for these compounds. In contrast, the Delta delta values were irregularly arranged for the acyclic anti-1,3-diols and, accordingly, this method is not valid for these cases. These results are complementary to those of the previously reported CD exciton chirality method and, hence, the combined use of the modified Mosher's method and the CD exciton chirality method can determine the absolute configuration of the acyclic 1,3-diols. Also, this method is successfully applicable to cyclic 1,3-diols irrespective of their relative stereochemistry. (C) 2002 Wiley-lass, Inc.

Short-chain di-ureasil ormolytes doped with potassium triflate: Phase diagram and conductivity behavior

Di-urea cross-linked poly(oxyethylene)/siloxane hybrids, synthesized by the sol-gel process and containing a wide concentration range of potassium triflate, KCF3SO3, have been analyzed by x-ray diffraction and differential scanning calorimetry. The pseudo-phase diagram proposed has been taken into account in the interpretation of the complex impedance measurements. The xerogels prepared are obtained as transparent, thin monoliths. At room temperature the highest conductivity found was 2 × 10-6 Ω-1 cm-1.

Development of SCAR marker linked to stem canker resistance gene in soybean

Stem canker caused by the fungus Diaporthe phaseolorum f. sp. meridionalis is a disease that limits soybean cultivation. Phenotypic evaluations aiming at disease resistance require labor-intensive processes, as for instance handling and transport of phytopathogens. The use of DNA markers in the selective procedures eases certain phases, besides being practical, safe and reliable. A RAPD fragment of 588pb was identified among bulks of resistant and susceptible plants in the cross BR92-15454 (R) x IAC-11 (S). Through co-segregation, the distance between the resistance locus and the fragment was estimated at 7.4 ± 2.1 cM, with a Lodmax. of 23.072 (first year) and at 6.0 ± 3.4 cM with a Lodmax. of 7.806 (second year). The fragment was converted into a SCAR marker and digested with enzyme Hinc II, which made the classification in homozygous resistant, heterozygous resistant and susceptible plants possible. This SCAR marker is suitable for use in the improvement program conducted in Jaboticabal.

Determination of the mercury fraction linked to protein of muscle and liver tissue of Tucunaré (Cichla spp.) from the Amazon Region of Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Structure of the PilZ-FimXEAL-c-di-GMP complex responsible for the regulation of bacterial type IV pilus biogenesis

Signal transduction pathways mediated by cyclic-bis(3'→5')-dimeric GMP (c-di-GMP) control many important and complex behaviors in bacteria. C-di-GMP is synthesized through the action of GGDEF domains that possess diguanylate cyclase activity and is degraded by EAL or HD-GYP domains with phosphodiesterase activity. There is mounting evidence that some important c-di-GMP-mediated pathways require protein-protein interactions between members of the GGDEF, EAL, HD-GYP and PilZ protein domain families. For example, interactions have been observed between PilZ and the EAL domain from FimX of Xanthomonas citri (Xac). FimX and PilZ are involved in the regulation of type IV pilus biogenesis via interactions of the latter with the hexameric PilB ATPase associated with the bacterial inner membrane. Here, we present the crystal structure of the ternary complex made up of PilZ, the FimX EAL domain (FimXEAL) and c-di-GMP. PilZ interacts principally with the lobe region and the N-terminal linker helix of the FimXEAL. These interactions involve a hydrophobic surface made up of amino acids conserved in a non-canonical family of PilZ domains that lack intrinsic c-di-GMP binding ability and strand complementation that joins β-sheets from both proteins. Interestingly, the c-di-GMP binds to isolated FimXEAL and to the PilZ-FimXEAL complex in a novel conformation encountered in c-di-GMP-protein complexes in which one of the two glycosidic bonds is in a rare syn conformation while the other adopts the more common anti conformation. The structure points to a means by which c-di-GMP and PilZ binding could be coupled to FimX and PilB conformational states

Identificazione di profili di rischio cardiovascolare nel trapianto di rene: polimorfismi di geni coinvolti nei processi di infiammazione e di apoptosi

Introduction. Cardiovascular disease (CVD) represents the main cause of morbidity and mortality in kidney recipients. This study was undertaken to assess the impact of functional polymorphisms located in cytokine and apoptosis genes on CVD after kidney transplantation. Cytokine polymorphisms, generally located in gene regulatory regions, are associated with high and low cytokine production and are likely to modulate the magnitude of inflammatory responses following transplantation, depending on the balance between the levels of pro-inflammatory and antiinflammatory cytokines. The role of apoptosis in atherosclerosis has not been completely elucidated, and here we explored the hypothesis that the heterogeneity in cardiovascular risk in kidney recipients may also be linked to functional polymorphisms involved in apoptosis induction. Purpose. In the search for relevant genetic markers of predisposition to CVD after renal transplant, the present investigation was undertaken to identify the clinical impact of polymorphisms of cytokines TNF-α, TGF-β, IL-10, IL-6, IFN-γ and IL-8 and of apoptosis genes Fas and Caspase 9 in a population of kidney transplant recipients. Materials and methods. The study involved 167 patients who received cadaveric kidney transplantation at our centre between 1997 and 2005 (minimum follow-up of 12 months); 35 of them had experienced cardiovascular events (CVD group) and 132 had no cardiovascular complications (non-CVD group). Genotyping was performed using RFLP (Restriction Fragment Length Polymorphism) for RFLP per IL-8/T-251A, Fas/G-670A e Casp9/R221Q polymorphism and SSP (Sequence Specific Primer) for TNF-α/G-308A, TGF-β/L10P, TGF-β/R25P, IL-10/G-1082A, IL- 10/C-819T, IL-10/C-592A, IL-6/G-174C, IFN-γ/T+874A polymorphisms.Results. We found a significant difference in TNF-α and IL-10 genotype frequencies between the patients who had suffered cardiovascular events and those with no CVD history. The high producer genotype for proflogistic cytokine TNF-α appeared to have a significantly superior prevalence in the CVD group compared to the non-CVD group (40.0% vs 21.2%) and it resulted in a 2.4-fold increased cardiovascular risk (OR=2.361; p=0.0289). On the other hand, the high producer genotype for the antiinflammatory cytokine IL-10 was found in 2.8% of the CVD group and in 16.7% of non-CVD group; logistic regression showed a 0.3-fold reduced risk of CVD associated with genetically determined high IL-10 production (OR=0.278; p<0.0001). The other polymorphisms did not prove to have any impact on CVD. Conclusions. TNF-α and IL-10 gene polymorphisms might represent cardiovascular risk markers in renal transplant recipients.

Expression of the repressor element-1 silencing transcription factor (REST) is regulated by IGF-I and PKC in human neuroblastoma cells

The repressor element 1-silencing transcription factor (REST) was first identified as a protein that binds to a 21-bp DNA sequence element (known as repressor element 1 (RE1)) resulting in transcriptional repression of the neural-specific genes [Chong et al., 1995; Schoenherr and Anderson, 1995]. The original proposed role for REST was that of a factor responsible for restricting neuronal gene expression to the nervous system by silencing expression of these genes in non-neuronal cells. Although it was initially thought to repress neuronal genes in non-neuronal cells, the role of REST is complex and tissue dependent. In this study I investigated any role played by REST in the induction and patterning of differentiation of SH-SY5Y human neuroblastoma cells exposed to IGF-I. and phorbol 12- myristate 13-acetate (PMA) To down-regulate REST expression we developed an antisense (AS) strategy based on the use of phosphorothioate oligonucleotides (ODNs). In order to evaluate REST mRNA levels, we developed a real-time PCR technique and REST protein levels were evaluated by western blotting. Results showed that nuclear REST is increased in SH-SY5Y neuroblastoma cells cultured in SFM and exposed to IGF-I for 2-days and it then declines in 5-day-treated cells concomitant with a progressive neurite extension. Also the phorbol ester PMA was able to increase nuclear REST levels after 3-days treatment concomitant to neuronal differentiation of neuroblastoma cells, whereas, at later stages, it is down-regulated. Supporting these data, the exposure to PKC inhibitors (GF10923X and Gö6976) and PMA (16nM) reverted the effects observed with PMA alone. REST levels were related to morphological differentiation, expression of growth coneassociated protein 43 (GAP-43; a gene not regulated by REST) and of synapsin I and βIII tubulin (genes regulated by REST), proteins involved in the early stage of neuronal development. We observed that differentiation of SH-SY5Y cells by IGF-I and PMA was accompanied by a significant increase of these neuronal markers, an effect that was concomitant with REST decrease. In order to relate the decreased REST expression with a progressive neurite extension, I investigated any possible involvement of the ubiquitin–proteasome system (UPS), a multienzymatic pathway which degrades polyubiquinated soluble cytoplasmic proteins [Pickart and Cohen, 2004]. For this purpose, SH-SY5Y cells are concomitantly exposed to PMA and the proteasome inhibitor MG132. In SH-SY5Y exposed to PMA and MG 132, we observed an inverse pattern of expression of synapsin I and β- tubulin III, two neuronal differentiation markers regulated by REST. Their cytoplasmic levels are reduced when compared to cells exposed to PMA alone, as a consequence of the increase of REST expression by proteasome inhibitor. The majority of proteasome substrates identified to date are marked for degradation by polyubiquitinylation; however, exceptions to this principle, are well documented [Hoyt and Coffino, 2004]. Interestingly, REST degradation seems to be completely ubiquitin-independent. The expression pattern of REST could be consistent with the theory that, during early neuronal differentiation induced by IGF-I and PKC, it may help to repress the expression of several genes not yet required by the differentiation program and then it declines later. Interestingly, the observation that REST expression is progressively reduced in parallel with cell proliferation seems to indicate that the role of this transcription factor could also be related to cell survival or to counteract apotosis events [Lawinger et al., 2000] although, as shown by AS-ODN experiments, it does not seem to be directly involved in cell proliferation. Therefore, the decline of REST expression is a comparatively later event during maturation of neuroroblasts in vitro. Thus, we propose that REST is regulated by growth factors, like IGF-I, and PKC activators in a time-dependent manner: it is elevated during early steps of neural induction and could contribute to down-regulate genes not yet required by the differentiation program while it declines later for the acquisition of neural phenotypes, concomitantly with a progressive neurite extension. This later decline is regulated by the proteasome system activation in an ubiquitin-indipendent way and adds more evidences to the hypothesis that REST down-regulation contributes to differentiation and arrest of proliferation of neuroblastoma cells. Finally, the glycosylation pattern of the REST protein was analysed, moving from the observation that the molecular weight calculated on REST sequence is about 116 kDa but using western blotting this transcription factor appears to have distinct apparent molecular weight (see Table 1.1): this difference could be explained by post-translational modifications of the proteins, like glycosylation. In fact recently, several studies underlined the importance of O-glycosylation in modulating transcriptional silencing, protein phosphorylation, protein degradation by proteasome and protein–protein interactions [Julenius et al., 2005; Zachara and Hart, 2006]. Deglycosilating analysis showed that REST protein in SH-SY5Y and HEK293 cells is Oglycosylated and not N-glycosylated. Moreover, using several combination of deglycosilating enzymes it is possible to hypothesize the presence of Gal-β(1-3)-GalNAc residues on the endogenous REST, while β(1-4)-linked galactose residues may be present on recombinant REST protein expressed in HEK293 cells. However, the O-glycosylation process produces an immense multiplicity of chemical structures and monosaccharides must be sequentially hydrolyzed by a series of exoglycosidase. Further experiments are needed to characterize all the post-translational modification of the transcription factor REST.

Optically active photoresponsive multifunctional polymeric materials

In the last year [1], Angiolini and co-workers have synthesized and investigated methacrylic polymers bearing in the side chain the chiral cyclic (S)-3-hydroxypyrrolidine moiety interposed between the main chain and the trans-azoaromatic chromophore, substituted or not in the 4’ position by an electron-withdrawing group. In these materials, the presence of a rigid chiral moiety of one prevailing absolute configuration favours the establishment of a chiral conformation of one prevailing helical handedness, at least within chain segments of the macromolecules, which can be observed by circular dichroism (CD). The simultaneous presence of the azoaromatic and chiral functionalities allows the polymers to display both the properties typical of dissymmetric systems (optical activity, exciton splitting of dichroic absorptions), as well as the features typical of photochromic materials (photorefractivity, photoresponsiveness, NLO properties). The first part of this research was to synthesize analogue homopolymers and copolymers based on bisazoaromatic moiety and compare their properties to those of the above mentioned analogue derivatives bearing only one azoaromatic chromophore in the side chain. We focused also the attention on the effects induced on the thermal and chiroptical behaviours by the insertion of particulars achiral comonomers characterized by different side-chain mobility and grown hindrance (MMA, tert-BMA and TrMA). On the other hand carbazole containing polymers [2] have attracted much attention because of their unique features. The use of these materials in advanced micro- and nanotechnologies spreads in many different applications such as photoconductive and photorefractive polymers, electroluminescent devices, programmable optical interconnections, data storage, chemical photoreceptors, NLO, surface relief gratings, blue emitting materials and holographic memory. The second part of the work was focused on the synthesis and the characterization polymeric derivatives bearing in the side chain carbazole or phenylcarbazole moieties linked to the (S)- 2-hydroxy succinimide or the (S)-3-hydroxy pyrrolidinyl ring as chiral groups covalently linked to the main chain through ester bonds. The last objective of this research was to design, synthesize, and characterize multifunctional methacrylic homopolymers and copolymers bearing three distinct functional groups (i.e. azoaromatic, carbazole and chiral group of one single configuration) directly linked in the side chain. This polymeric derivatives could be of potential interest for several advanced application fields, such as optical storage, waveguides, chiroptical switches, chemical photoreceptors, NLO, surface relief gratings, photoconductive materials, etc.

Donne migranti a Modena: il lavoro di "badante" tra vincolo e risorsa

This study enters the world of migrants women daily involved in the work of caregiving to elderly people in Modena. The multidimensional analysis that characterizes this work brings together elements which are examined, simultaneously, as bounds and/or opportunities within the migratory experience of these women. The interviews collected will be analyzed in parallel and linked to the international debates on contemporary migrations: the meaning of transnational migrations, the role of the networks in guiding integration, the limits and strengths of multiculturalist theories, the concept of ‘superdiversity’, the link among entitlement, rights and access to citizenship. The present study place at the centre of its observation the “daily practices” that allow every migrant to negotiate its ‘power’, its ‘freedom’ and its ‘rights’, so as to recognize agency to these women in the creation of their strategies and social boundaries. Moreover, the study focuses on the ability and power of the State, and its institutions, to create categorizations among migrants based on their social and economic ‘usefulness’, which produce effects in the daily lives of these workers.

Analisi del comportamento a caldo dell'acciaio AISI - H11 per la stima della vita utile di matrici per estrusione

The effect of process parameters on the creep-fatigue behavior of a hot-work tool steel for aluminum extrusion die was investigated through a technological test in which the specimen geometry resembled the mandrel of a hollow extrusion die. Tests were performed on a Gleeble thermomechanical simulator by heating the specimen using joule’s effect and by applying cyclic loading up to 6.30 h or till specimen failure. Displacements during the tests at 380, 490, 540 and 580°C and under the average stresses of 400, 600 and 800 MPa were determined. In the first set of test a dwell time of 3 min was introduced during each of the tests to understand the creep behavior. The results showed that the test could indeed physically simulate the cyclic loading on the hollow die during extrusion and reveal all the mechanisms of creep-fatigue interaction. In the second set a pure fatigue laod were induced and in the third set a static creep load were induced in the specimens. Furher type of tests, finite element and microstructural analysis were presented.

Aumento della risoluzione spaziale per il sondaggio di temperatura e umidità da satellite geostazionario mediante radiometria ad onde millimetriche e submillimetriche

The purpose of this study is to develop and evaluate techniques that improve the spatial resolution of the channels already selected in the preliminary studies for Geostationary Observatory for Microwave Atmospheric Soundings (GOMAS). Reference high resolution multifrequency brightness temperatures scenarios have been derived by applying radiative transfer calculation to the spatially and microphysically detailed output of meteorological events simulated by the University of Wisconsin - Non-hydrostatic Model System (UW-NMS). Three approaches, Wiener filter, Super-Resolution and Image Fusion have been applied to some representative GOMAS frequency channels to enhance the resolution of antenna temperatures. The Wiener filter improved resolution of the largely oversampled images by a factor 1.5- 2.0 without introducing any penalty in the radiometric accuracy. Super-resolution, suitable for not largely oversampled images, improved resolution by a factor ~1.5 but introducing an increased radiometric noise by a factor 1.4-2.5. The image fusion allows finally to further increase the spatial frequency of the images obtained by the Wiener filter increasing the total resolution up to a factor 5.0 with an increased radiometric noise closely linked to the radiometric frequency and to the examined case study.

Sviluppo di metodologie di localizzazione nel contesto del Comprehensive Nuclear Test-Ban Treaty

Since the first underground nuclear explosion, carried out in 1958, the analysis of seismic signals generated by these sources has allowed seismologists to refine the travel times of seismic waves through the Earth and to verify the accuracy of the location algorithms (the ground truth for these sources was often known). Long international negotiates have been devoted to limit the proliferation and testing of nuclear weapons. In particular the Treaty for the comprehensive nuclear test ban (CTBT), was opened to signatures in 1996, though, even if it has been signed by 178 States, has not yet entered into force, The Treaty underlines the fundamental role of the seismological observations to verify its compliance, by detecting and locating seismic events, and identifying the nature of their sources. A precise definition of the hypocentral parameters represents the first step to discriminate whether a given seismic event is natural or not. In case that a specific event is retained suspicious by the majority of the State Parties, the Treaty contains provisions for conducting an on-site inspection (OSI) in the area surrounding the epicenter of the event, located through the International Monitoring System (IMS) of the CTBT Organization. An OSI is supposed to include the use of passive seismic techniques in the area of the suspected clandestine underground nuclear test. In fact, high quality seismological systems are thought to be capable to detect and locate very weak aftershocks triggered by underground nuclear explosions in the first days or weeks following the test. This PhD thesis deals with the development of two different seismic location techniques: the first one, known as the double difference joint hypocenter determination (DDJHD) technique, is aimed at locating closely spaced events at a global scale. The locations obtained by this method are characterized by a high relative accuracy, although the absolute location of the whole cluster remains uncertain. We eliminate this problem introducing a priori information: the known location of a selected event. The second technique concerns the reliable estimates of back azimuth and apparent velocity of seismic waves from local events of very low magnitude recorded by a trypartite array at a very local scale. For the two above-mentioned techniques, we have used the crosscorrelation technique among digital waveforms in order to minimize the errors linked with incorrect phase picking. The cross-correlation method relies on the similarity between waveforms of a pair of events at the same station, at the global scale, and on the similarity between waveforms of the same event at two different sensors of the try-partite array, at the local scale. After preliminary tests on the reliability of our location techniques based on simulations, we have applied both methodologies to real seismic events. The DDJHD technique has been applied to a seismic sequence occurred in the Turkey-Iran border region, using the data recorded by the IMS. At the beginning, the algorithm was applied to the differences among the original arrival times of the P phases, so the cross-correlation was not used. We have obtained that the relevant geometrical spreading, noticeable in the standard locations (namely the locations produced by the analysts of the International Data Center (IDC) of the CTBT Organization, assumed as our reference), has been considerably reduced by the application of our technique. This is what we expected, since the methodology has been applied to a sequence of events for which we can suppose a real closeness among the hypocenters, belonging to the same seismic structure. Our results point out the main advantage of this methodology: the systematic errors affecting the arrival times have been removed or at least reduced. The introduction of the cross-correlation has not brought evident improvements to our results: the two sets of locations (without and with the application of the cross-correlation technique) are very similar to each other. This can be commented saying that the use of the crosscorrelation has not substantially improved the precision of the manual pickings. Probably the pickings reported by the IDC are good enough to make the random picking error less important than the systematic error on travel times. As a further justification for the scarce quality of the results given by the cross-correlation, it should be remarked that the events included in our data set don’t have generally a good signal to noise ratio (SNR): the selected sequence is composed of weak events ( magnitude 4 or smaller) and the signals are strongly attenuated because of the large distance between the stations and the hypocentral area. In the local scale, in addition to the cross-correlation, we have performed a signal interpolation in order to improve the time resolution. The algorithm so developed has been applied to the data collected during an experiment carried out in Israel between 1998 and 1999. The results pointed out the following relevant conclusions: a) it is necessary to correlate waveform segments corresponding to the same seismic phases; b) it is not essential to select the exact first arrivals; and c) relevant information can be also obtained from the maximum amplitude wavelet of the waveforms (particularly in bad SNR conditions). Another remarkable point of our procedure is that its application doesn’t demand a long time to process the data, and therefore the user can immediately check the results. During a field survey, such feature will make possible a quasi real-time check allowing the immediate optimization of the array geometry, if so suggested by the results at an early stage.

Dalla città alla casa, dalla casa alla città: la mutevole ricerca di un Piano per il ben-essere urbano

La ricerca si propone di definire le linee guida per la stesura di un Piano che si occupi di qualità della vita e di benessere. Il richiamo alla qualità e al benessere è positivamente innovativo, in quanto impone agli organi decisionali di sintonizzarsi con la soggettività attiva dei cittadini e, contemporaneamente, rende evidente la necessità di un approccio più ampio e trasversale al tema della città e di una più stretta relazione dei tecnici/esperti con i responsabili degli organismi politicoamministrativi. La ricerca vuole indagare i limiti dell’urbanistica moderna di fronte alla complessità di bisogni e di nuove necessità espresse dalle popolazioni urbane contemporanee. La domanda dei servizi è notevolmente cambiata rispetto a quella degli anni Sessanta, oltre che sul piano quantitativo anche e soprattutto sul piano qualitativo, a causa degli intervenuti cambiamenti sociali che hanno trasformato la città moderna non solo dal punto di vista strutturale ma anche dal punto di vista culturale: l’intermittenza della cittadinanza, per cui le città sono sempre più vissute e godute da cittadini del mondo (turisti e/o visitatori, temporaneamente presenti) e da cittadini diffusi (suburbani, provinciali, metropolitani); la radicale trasformazione della struttura familiare, per cui la famiglia-tipo costituita da una coppia con figli, solido riferimento per l’economia e la politica, è oggi minoritaria; l’irregolarità e flessibilità dei calendari, delle agende e dei ritmi di vita della popolazione attiva; la mobilità sociale, per cui gli individui hanno traiettorie di vita e pratiche quotidiane meno determinate dalle loro origini sociali di quanto avveniva nel passato; l’elevazione del livello di istruzione e quindi l’incremento della domanda di cultura; la crescita della popolazione anziana e la forte individualizzazione sociale hanno generato una domanda di città espressa dalla gente estremamente variegata ed eterogenea, frammentata e volatile, e per alcuni aspetti assolutamente nuova. Accanto a vecchie e consolidate richieste – la città efficiente, funzionale, produttiva, accessibile a tutti – sorgono nuove domande, ideali e bisogni che hanno come oggetto la bellezza, la varietà, la fruibilità, la sicurezza, la capacità di stupire e divertire, la sostenibilità, la ricerca di nuove identità, domande che esprimono il desiderio di vivere e di godere la città, di stare bene in città, domande che non possono essere più soddisfatte attraverso un’idea di welfare semplicemente basata sull’istruzione, la sanità, il sistema pensionistico e l’assistenza sociale. La città moderna ovvero l’idea moderna della città, organizzata solo sui concetti di ordine, regolarità, pulizia, uguaglianza e buon governo, è stata consegnata alla storia passata trasformandosi ora in qualcosa di assai diverso che facciamo fatica a rappresentare, a descrivere, a raccontare. La città contemporanea può essere rappresentata in molteplici modi, sia dal punto di vista urbanistico che dal punto di vista sociale: nella letteratura recente è evidente la difficoltà di definire e di racchiudere entro limiti certi l’oggetto “città” e la mancanza di un convincimento forte nell’interpretazione delle trasformazioni politiche, economiche e sociali che hanno investito la società e il mondo nel secolo scorso. La città contemporanea, al di là degli ambiti amministrativi, delle espansioni territoriali e degli assetti urbanistici, delle infrastrutture, della tecnologia, del funzionalismo e dei mercati globali, è anche luogo delle relazioni umane, rappresentazione dei rapporti tra gli individui e dello spazio urbano in cui queste relazioni si muovono. La città è sia concentrazione fisica di persone e di edifici, ma anche varietà di usi e di gruppi, densità di rapporti sociali; è il luogo in cui avvengono i processi di coesione o di esclusione sociale, luogo delle norme culturali che regolano i comportamenti, dell’identità che si esprime materialmente e simbolicamente nello spazio pubblico della vita cittadina. Per studiare la città contemporanea è necessario utilizzare un approccio nuovo, fatto di contaminazioni e saperi trasversali forniti da altre discipline, come la sociologia e le scienze umane, che pure contribuiscono a costruire l’immagine comunemente percepita della città e del territorio, del paesaggio e dell’ambiente. La rappresentazione del sociale urbano varia in base all’idea di cosa è, in un dato momento storico e in un dato contesto, una situazione di benessere delle persone. L’urbanistica moderna mirava al massimo benessere del singolo e della collettività e a modellarsi sulle “effettive necessità delle persone”: nei vecchi manuali di urbanistica compare come appendice al piano regolatore il “Piano dei servizi”, che comprende i servizi distribuiti sul territorio circostante, una sorta di “piano regolatore sociale”, per evitare quartieri separati per fasce di popolazione o per classi. Nella città contemporanea la globalizzazione, le nuove forme di marginalizzazione e di esclusione, l’avvento della cosiddetta “new economy”, la ridefinizione della base produttiva e del mercato del lavoro urbani sono espressione di una complessità sociale che può essere definita sulla base delle transazioni e gli scambi simbolici piuttosto che sui processi di industrializzazione e di modernizzazione verso cui era orientata la città storica, definita moderna. Tutto ciò costituisce quel complesso di questioni che attualmente viene definito “nuovo welfare”, in contrapposizione a quello essenzialmente basato sull’istruzione, sulla sanità, sul sistema pensionistico e sull’assistenza sociale. La ricerca ha quindi analizzato gli strumenti tradizionali della pianificazione e programmazione territoriale, nella loro dimensione operativa e istituzionale: la destinazione principale di tali strumenti consiste nella classificazione e nella sistemazione dei servizi e dei contenitori urbanistici. E’ chiaro, tuttavia, che per poter rispondere alla molteplice complessità di domande, bisogni e desideri espressi dalla società contemporanea le dotazioni effettive per “fare città” devono necessariamente superare i concetti di “standard” e di “zonizzazione”, che risultano essere troppo rigidi e quindi incapaci di adattarsi all’evoluzione di una domanda crescente di qualità e di servizi e allo stesso tempo inadeguati nella gestione del rapporto tra lo spazio domestico e lo spazio collettivo. In questo senso è rilevante il rapporto tra le tipologie abitative e la morfologia urbana e quindi anche l’ambiente intorno alla casa, che stabilisce il rapporto “dalla casa alla città”, perché è in questa dualità che si definisce il rapporto tra spazi privati e spazi pubblici e si contestualizzano i temi della strada, dei negozi, dei luoghi di incontro, degli accessi. Dopo la convergenza dalla scala urbana alla scala edilizia si passa quindi dalla scala edilizia a quella urbana, dal momento che il criterio del benessere attraversa le diverse scale dello spazio abitabile. Non solo, nei sistemi territoriali in cui si è raggiunto un benessere diffuso ed un alto livello di sviluppo economico è emersa la consapevolezza che il concetto stesso di benessere sia non più legato esclusivamente alla capacità di reddito collettiva e/o individuale: oggi la qualità della vita si misura in termini di qualità ambientale e sociale. Ecco dunque la necessità di uno strumento di conoscenza della città contemporanea, da allegare al Piano, in cui vengano definiti i criteri da osservare nella progettazione dello spazio urbano al fine di determinare la qualità e il benessere dell’ambiente costruito, inteso come benessere generalizzato, nel suo significato di “qualità dello star bene”. E’ evidente che per raggiungere tale livello di qualità e benessere è necessario provvedere al soddisfacimento da una parte degli aspetti macroscopici del funzionamento sociale e del tenore di vita attraverso gli indicatori di reddito, occupazione, povertà, criminalità, abitazione, istruzione, etc.; dall’altra dei bisogni primari, elementari e di base, e di quelli secondari, culturali e quindi mutevoli, trapassando dal welfare state allo star bene o well being personale, alla wellness in senso olistico, tutte espressioni di un desiderio di bellezza mentale e fisica e di un nuovo rapporto del corpo con l’ambiente, quindi manifestazione concreta di un’esigenza di ben-essere individuale e collettivo. Ed è questa esigenza, nuova e difficile, che crea la diffusa sensazione dell’inizio di una nuova stagione urbana, molto più di quanto facciano pensare le stesse modifiche fisiche della città.