Sustainable infrastructure project planning : progress in contemporary decision support tools

Most infrastructure project developments are complex in nature, particularly in the planning phase. During this stage, many vague alternatives are tabled - from the strategic to operational level. Human judgement and decision making are characterised by biases, errors and the use of heuristics. These factors are intangible and hard to measure because they are subjective and qualitative in nature. The problem with human judgement becomes more complex when a group of people are involved. The variety of different stakeholders may cause conflict due to differences in personal judgements. Hence, the available alternatives increase the complexities of the decision making process. Therefore, it is desirable to find ways of enhancing the efficiency of decision making to avoid misunderstandings and conflict within organisations. As a result, numerous attempts have been made to solve problems in this area by leveraging technologies such as decision support systems. However, most construction project management decision support systems only concentrate on model development and neglect fundamentals of computing such as requirement engineering, data communication, data management and human centred computing. Thus, decision support systems are complicated and are less efficient in supporting the decision making of project team members. It is desirable for decision support systems to be simpler, to provide a better collaborative platform, to allow for efficient data manipulation, and to adequately reflect user needs. In this chapter, a framework for a more desirable decision support system environment is presented. Some key issues related to decision support system implementation are also described.

Real-time simulation for power systems based on parallel computing - an empirical study

Abstract Computer simulation is a versatile and commonly used tool for the design and evaluation of systems with different degrees of complexity. Power distribution systems and electric railway network are areas for which computer simulations are being heavily applied. A dominant factor in evaluating the performance of a software simulator is its processing time, especially in the cases of real-time simulation. Parallel processing provides a viable mean to reduce the computing time and is therefore suitable for building real-time simulators. In this paper, we present different issues related to solving the power distribution system with parallel computing based on a multiple-CPU server and we will concentrate, in particular, on the speedup performance of such an approach.

Eschewing the fat: strong production but Neil LaBute below his best : a review

AWARD-WINNING American play and screen writer Neil LaBute is known for producing character-driven dramas that concentrate on the darker side of human nature and desire. In Fat Pig, LaBute picks up on a familiar theme: the way a perverse social preference for physical perfection affects human relationships. It is a topic LaBute has tackled before in The Shape of Things, a compelling play in which a beautiful young woman's efforts to help her new boyfriend pursue a program of self-improvement are eventually revealed to be part of a bizarre human experiment for her master-of-fine-arts degree.

Examination of process to develop a framework for better implementation of quality practices in building projects

Quality, as well as project success, in construction projects should be capable of being regarded as the fulfillment of expectation of those contributors and stakeholders involved in such projects. Although a significant amount of quality practices have been introduced within the industry, establishment and attainment of reasonable levels of quality internationally in construction projects continues to be an ongoing problem. To date, some investigation into the introduction and improvement of quality practices and stakeholder management in the construction industry has been accomplished independently, but so far no major studies have been completed that examine comprehensively how quality management practices that particularly concentrate on the stakeholders’ perspective of quality can be used to contribute to final project quality outcomes. This paper aims to examine the process for development of a framework for better involvement of stakeholders in quality planning and practices and subsequently to contribute to higher quality outcomes within construction projects. Through extensive literature review it highlights various perceptions of quality, categorizes quality issues with particular focus on benefits and shortcomings and also examines stakeholders’ viewpoint of project quality in order to promote the improvement of outcomes throughout a project’s lifecycle. It proposes a set of arranged information as a basis for development of prospective framework which ultimately aims to improve project quality outcomes. The subsequent framework that will be developed from this research will provide project managers and owners with the required information and strategic direction to achieve their own and their stakeholders’ targets for implementation of quality practices and achievement of high quality outcomes on their future projects.

Equity in the twenty-first century

Issues of equity and inequity have always been part of employment relations and are a fundamental part of the industrial landscape. For example, in most countries in the nineteenth century and a large part of the twentieth century women and members of ethnic groups (often a minority in the workforce) were barred from certain occupations, industries or work locations, and received less pay than the dominant male ethnic group for the same work. In recent decades attention has been focused on issues of equity between groups, predominantly women and different ethnic groups in the workforce. This has been embodied in industrial legislation, for example in equal pay for women and men, and frequently in specific equity legislation. In this way a whole new area of law and associated workplace practice has developed in many countries. Historically, employment relations and industrial relations research has not examined employment issues disaggregated by gender or ethnic group. Born out of concern with conflict and regulation at the workplace, studies tended to concentrate on white, male, unionized workers in manufacturing and heavy industry (Ackers, 2002, p. 4). The influential systems model crafted by Dunlop (1958) gave rise to The discipline’s preoccupation with the ‘problem of order’ [which] ensures the invisibility of women, not only because women have generally been less successful in mobilizing around their own needs and discontents, but more profoundly because this approach identifies the employment relationship as the ultimate source of power and conflict at work (Forrest, 1993, p. 410). While ‘the system approach does not deliberately exclude gender . . . by reproducing a very narrow research approach and understanding of issues of relevance for the research, gender is in general excluded or looked on as something of peripheral interest’ (Hansen, 2002, p. 198). However, long-lived patterns of gender segregation in occupations and industries, together with discriminatory access to work and social views about women and ethnic groups in the paid workforce, mean that the employment experience of women and ethnic groups is frequently quite different to that of men in the dominant ethnic group. Since the 1980s, research into women and employment has figured in the employment relations literature, but it is often relegated to a separate category in specific articles or book chapters, with women implicitly or explicitly seen as the atypical or exceptional worker (Hansen, 2002; Wajcman, 2000). The same conclusion can be reached for other groups with different labour force patterns and employment outcomes. This chapter proposes that awareness of equity issues is central to employment relations. Like industrial relations legislation and approaches, each country will have a unique set of equity policies and legislation, reflecting their history and culture. Yet while most books on employment and industrial relations deal with issues of equity in a separate chapter (most commonly on equity for women or more recently on ‘diversity’), the reality in the workplace is that all types of legislation and policies which impact on the wages and working conditions interact, and their impact cannot be disentangled one from another. When discussing equity in workplaces in the twenty-first century we are now faced with a plethora of different terms in English. Terms used include discrimination, equity, equal opportunity, affirmative action and diversity with all its variants (workplace diversity, managing diversity, and so on). There is a lack of agreed definitions, particularly when the terms are used outside of a legislative context. This ‘shifting linguistic terrain’ (Kennedy-Dubourdieu, 2006b, p. 3) varies from country to country and changes over time even within the one country. There is frequently a division made between equity and its related concepts and the range of expressions using the term ‘diversity’ (Wilson and Iles, 1999; Thomas and Ely, 1996). These present dilemmas for practitioners and researchers due to the amount and range of ideas prevalent – and the breadth of issues that are covered when we say ‘equity and diversity in employment’. To add to these dilemmas, the literature on equity and diversity has become bifurcated: the literature on workplace diversity/management diversity appears largely in the business literature while that on equity in employment appears frequently in legal and industrial relations journals. Workplaces of the twenty-first century differ from those of the nineteenth and twentieth century not only in the way they deal with individual and group differences but also in the way they interpret what are fair and equitable outcomes for different individuals and groups. These variations are the result of a range of social conditions, legislation and workplace constraints that have influenced the development of employment equity and the management of diversity. Attempts to achieve employment equity have primarily been dealt with through legislative means, and in the last fifty years this legislation has included elements of anti-discrimination, affirmative action, and equal employment opportunity in virtually all OECD countries (Mor Barak, 2005, pp. 17–52). Established on human rights and social justice principles, this legislation is based on the premise that systemic discrimination has and/or continues to exist in the labour force and particular groups of citizens have less advantageous employment outcomes. It is based on group identity, and employment equity programmes in general apply across all workplaces and are mandatory. The more recent notions of diversity in the workplace are based on ideas coming principally from the USA in the 1980s which have spread widely in the Western world since the 1990s. Broadly speaking, diversity ideas focus on individual differences either on their own or in concert with the idea of group differences. The diversity literature is based on a business case: that is diversity is profitable in a variety of ways for business, and generally lacks a social justice or human rights justification (Burgess et al., 2009, pp. 81–2). Managing diversity is represented at the organizational level as a voluntary and local programme. This chapter discusses some major models and theories for equity and diversity. It begins by charting the history of ideas about equity in employment and then briefly discusses what is meant by equality and equity. The chapter then analyses the major debates about the ways in which equity can be achieved. The more recent ideas about diversity are then discussed, including the history of these ideas and the principles which guide this concept. The following section discusses both major frameworks of equity and diversity. The chapter then raises some ways in which insights from the equity and diversity literature can inform employment relations. Finally, the future of equity and diversity ideas is discussed.

Critical constructability activities in building projects

Fundamental studies on constructability issue done in United States, United Kingdom and Australia illustrate capability of this concept to affect overall objectives of construction projects. It can result in significant cost and time savings and improved final quality by consideration of construction contractors experiences during conceptual planning and design phases. As intensive as these studies are, they do not attempt to investigate importance of these activities in order to find each of their specific barriers separately. This research explores Constructability Activities (CAs) in all project phases separately based on amount of contractors involvement in each activity and also amount of gap that exists between target and actual effects of each activity on achieving the final objectives of building projects in Malaysia. It ends to development of Critical Constructability Activities (CCAs). This research is crucial to gaining a better understanding of CCAs which are caused based on contractors higher participation percentage and larger gaps between their target and actual effects on achieving the final aims of the project. This research highlights the need to overcome barriers of CAs implementation in building projects. This study recommends construction stakeholders to concentrate more on CCAs in order to achieve the overall objectives of the project much faster and easier.

Radioactive residues associated with water treatment, use and disposal in Australia

Water resources are known to contain radioactive materials, either from natural or anthropogenic sources. Treatment, including wastewater treatment, of water for drinking, domestic, agricultural and industrial purposes has the potential to concentrate radioactive materials. Inevitably concentrated radioactive material is discharged to the environment as a waste product, reused for soil conditioning, or perhaps recycled as a new potable water supply. This thesis, presented as a collection of peer reviewed scientific papers, explores a number of water / wastewater treatment applications, and the subsequent nature and potential impact of radioactive residues associated with water exploitation processes. The thesis draws together research outcomes for sites predominantly throughout Queensland, Australia, where it is recognised that there is a paucity of published data on the subject. This thesis contributes to current knowledge on the monitoring, assessment and potential for radiation exposure from radioactive residues associated with the water industry.

Arc voltage behavior in GMAW-P under different drop transfer modes

Purpose: Experimental measurements have been made to investigate meaning of the change in voltage for the pulse gas metal arc welding (GMAW-P) process operating under different drop transfer modes. Design/methodology/approach: Welding experiments with different values of pulsing parameter and simultaneous recording of high speed camera pictures and welding signals (such as current and voltage) were used to identify different drop transfer modes in GMAW-P. The investigation is based on the synchronization of welding signals and high speed camera to study the behaviour of voltage signal under different drop transfer modes. Findings: The results reveal that the welding arc is significantly affected by the molten droplet detachment. In fact, results indicate that sudden increase and drop in voltage just before and after the drop detachment can be used to characterize the voltage behaviour of different drop transfer mode in GMAW-P. Research limitations/implications: The results show that voltage signal carry rich information about different drop transfer occurring in GMAW-P. Hence it’s possible to detect different drop transfer modes. Future work should concentrate on development of filters for detection of different drop transfer modes. Originality/value: Determination of drop transfer mode with GMAW-P is crucial for the appropriate selection of pulse welding parameters. As change in drop transfer mode results in poor weld quality in GMAW-P, so in order to estimate the working parameters and ensure stable GMAW-P understanding the voltage behaviour of different drop transfer modes in GMAW-P will be useful. However, in case of GMAW-P hardly any attempt is made to analyse the behaviour of voltage signal for different drop transfer modes. This paper analyses the voltage signal behaviour of different drop transfer modes for GMAW-P.

Imagination for re-engagement from the margins of education

For marginalised secondary school students, mainstream education may no longer appear to be an inviting place. While proposed solutions to problems of disengagement and marginalisation appear to concentrate on finding ways to coerce students back to mainstream education through, for example, ‘learning or earning’ legislation, this article suggests that more effective solutions may be found by engaging with the students in the margins that they occupy. Following discussion of key influences on student disengagement and a theory of imaginations, a ‘students-as-researchers’ (SaR) model of working with young people is discussed to demonstrate that, through the scaffolded application of active imagination, it is possible for such students to identify and create their own connections to the mainstream. The SaR model is illustrated through reference to groups of disaffected high school students who participated in an action research project to investigate apparent low aspiration for tertiary education among their peers at schools serving low-income communities in Queensland, Australia.

(Dia)logics of difference disability, performance and spectatorship in Liz Crow's Resistance on the Plinth

In this article I examine how artists with disabilities use public-space performance to encourage passersby to reflect on the construction of public discourses about disability – and, therefore, the construction of publics that are potentially inclusive of people with disabilities. I concentrate on British storyteller, artist, filmmaker and activist Liz Crow's Resistance on the Plinth, one of four pieces Crow has produced over the past three years as part of the Resistance series, an examination of the Nazi regime's Aktion T4 programme, which resulted in the mass murder of a quarter of a million people with disabilities. Created in August 2009 as part of Antony Gormley's One & Other public art project, the piece featured Crow dressed in a Nazi uniform and seated in a wheelchair on the Fourth Plinth in London's Trafalgar Square. For Crow – who creates work in a British context where public debate about the eugenics of genetic testing, euthanasia and assisted suicide is prevalent in the media – the Nazi atrocity is still rich in confronting imagery, resonant and relevant in a contemporary context. In this article, I consider the challenges that Gormley's extremely public One & Other presented for professional artists like Crow, who are committed to intervening in public perceptions of identity, community and culture. I describe the structural choices Crow made to provoke debate about the cultural logics embodied in the image she presented, and analyse some of the spectatorial responses from online forums such as the One & Other website, Facebook and Twitter immediately following the event.

Best practice business community partnerships

In the last two years or so, the Prime Minister has made the development of a social coalition, involving business partnerships with the community, central to his Government’s vision of a fair and just Australian society. This is clearly a new and exciting era in thinking for government, business and community partnerships. However, there has been a tendency, particularly in the media reporting of these initiatives, especially the Prime Minister's Business Community Partnership awards held in 1999 and in July this year, to concentrate the agenda more on philanthropy and corporate donations, than on some of the many other ways that partnerships can develop...

Developing targeted countermeasures to improve motorcycle safety

The fatality and injury rate of motorcyclists per registered vehicle are higher than those of other motor vehicles by 13 and 7 times respectively. The crash involvement rate of motorcyclists as a victim party is 58% at intersections and as an offending party is 67% at expressways. Previous research efforts showed that the motorcycle safety programs are not very effective in improving motorcycle safety. This is perhaps due to inefficient design of safety program as specific causal factors may not be well explored. The objective of this study is to propose more sophisticated countermeasures and awareness programs for improving motorcycle safety after analyzing specific causal factors for motorcycle crashes at intersections and expressways. Methodologically this study applies the binary logistic model to explore the at-fault or not-at-fault crash involvement of motorcyclists at those locations. A number of explanatory variables representing roadway characteristics, environmental factors, motorcycle descriptions, and rider demographics have been evaluated. Results shows that the night time crash occurrence, presence of red light camera, lane position, rider age, licence class, and multivehicle collision significantly affect the fault of motorcyclists involved in crashes at intersections. On the other hand, the night time crash occurrence, lane position, speed limit, rider age, licence class, engine capacity, riding with pillion passenger, foreign registered motorcycles, and multivehicle collision has been found to be significant at expressways. Legislate to wear reflective clothes and using reflective markings on the motorcycles and helmets are suggested as an effective countermeasure for reducing their vulnerability. The red light cameras at intersections reduce the vulnerability of motorcycles and hence motorcycle flow and motorcycle crashes should be considered during installation of red light cameras. At signalized intersections, motorcyclists may be taught to follow correct movement and queuing rather than weaving through the traffic as it leads them to become victims of other motorists. The riding simulators in the training centers can be useful to demonstrate the proper movement and queuing at junctions. Riding with pillion passenger and excess speed at expressways are found to significantly influence the at at-fault crash involvement of the motorcyclists. Hence the motorcyclists should be advised to concentrate more on riding while riding with pillion passenger and encouraged to avoid excess speed at expressways. Very young and very older group of riders are found to be at-fault than middle aged groups. Hence this group of riders should be targeted for safety improvement. This can be done by arranging safety talks and programs in motorcycling clubs in colleges and universities as well as community riding clubs with high proportion of elderly riders. It is recommended that the driving centers may use the findings of this study to include in licensure program to make motorcyclists more aware of the different factors which expose the motorcyclists to crash risks so that more defensive riding may be needed.

Service convenience and social servicescape : retail vs hedonic setting

Purpose – While there have been numerous studies on the antecedents and consequences of service quality, there has been little investigation of the moderators of service quality. The purpose of this study is to demonstrate the effects of two moderators: service convenience and the social servicescape. The moderating effects are tested in two service settings: retail and hedonic (concert). Design/methodology/approach – A survey of 270 customers at kitchen display showrooms and 320 concert-goers was undertaken. The results were analysed using regression analysis. Findings – The results show support for ten of the 12 hypotheses. Service convenience moderated the relationships between perceived service quality and its three sub-dimensions (interaction, environment, and outcome quality), differently in different settings (retail vs hedonic). This supports the authors' general argument that the outcome dimension tends to be more important to customers in a retail setting, while interaction and environment quality dimensions tend to be more important in hedonic service consumption. Practical implications – These findings suggest that managers need to use different service management tactics in retail and hedonic service settings. Specifically managers in retail settings need to pay more attention to service convenience to achieve service quality and managers in hedonic settings should concentrate on the social servicescape. Originality/value – This paper is the first to test the moderating factors of service convenience and social servicescape on service quality.

Creating Queensland, creative communities partnership - major Brisbane festival & Australia Council for the Arts

In March 2010, Brisbane Festival commissioned a Research Team, led by Dr Bree Hadley and Dr Sandra Gattenhof, Creative Industries Faculty, Queensland University of Technology, to conduct an evaluation of the Creating Queensland program, a new Creative Communities partnership between Brisbane Festival and the Australia Council for the Arts. This Final Report reviews and reports on the effectiveness of the program gathered during three phases throughout 2010: Phase 1, in which the research team analysed Brisbane Festival’s pre-existing data on the Creating Queensland events in 2009; Phase 2, in which the research team designed a new suite of instruments to gather data from producers, producing partners, artists and attendees involved in the Creating Queensland events in 2010; and Phase 3, in which the research team used content analysis of the narratives emerging in the data to establish how Brisbane Festival has adopted processes, activities or engagement protocols to operate as catalysts that produce experiences with specific impacts on individuals and communities. The Final Report finds that the Creating Queensland events concentrate on developing specific experiences for those involved – usually associated with storytelling, showcasing, and the valorisation or re-valorisation of neglected or forgotten cultural forms – in order to give communities a voice. It finds that the events prioritise accessibility – usually associated with allowing specific local communities or local artists to present material that is meaningful to them – and inclusivity – usually associated with using connections with producing partners (such as the Multicultural Development Association) to bring more and more people into the program. It finds that the events have a capacity-building effect, which allows local communities to increase their capacity to launch their own ideas, initiatives or events, allows individuals to increase their employability, or allows communities and individuals to increase their visibility within mainstream cultural practices and infrastructure. The Final Report further finds that Brisbane Festival has, throughout its years of commitment to community programming, developed specific techniques to enable events in the Creating Queensland program to have these effects, that these can be tracked, and, as a result, deployed or redeployed both by Brisbane Festival and other community arts organisations in the development of effective community arts programs. The data demonstrates that Creating Queensland is, by and large, having the desired effect on communities – people are actually participating, presenting work, and increasing their personal, professional and social skills in various ways, and this is valued by all stakeholders. The data also demonstrates that, as would be expected with any community arts program – particularly programs of this size and complexity – there are areas in which Creating Queensland is functioning exceptionally well and areas in which continuous improvement processes should be continued. Areas of excellence relate to Brisbane Festival’s longstanding commitment to community arts, and active community participation in the arts, as well as its ability to create well-known and loved programs that use effective techniques to have a positive impact on communities. Areas for improvement relate to Brisbane Festival’s potential to benefit from the following: clarifying relationships between community participants and professionals; increasing mentoring relationships between these groups; consolidating the discourses it uses to describe event aims across strategic, production, and publicity documents across the years; and re-considering the number of small events inside the larger Creating Queensland program.

Knowledge economy market development mapping study

The knowledge economy relies on the diffusion and use of knowledge as well as its creation (Houghton and Sheenan, 2000). The future success of economic activity will depend on the capacity of organisations to transform by increasing their flexibility. In particular, this transformation is dependant on a decentralised, networked and multi-skilled workforce. To help organisations transition, new strategies and structures for education are required. Education systems need to concentrate less on specialist skills and more on the development of people with broad-based problem solving skills that are adaptable, with social and inter-personal communication skills necessary for networking and communication. This paper presents the findings of a ‘Knowledge Economy Market Development Mapping Study’ conducted to identify the value of design education programs from primary through to tertiary level in Queensland, Australia. The relationship of these programs to the development of the capacities mentioned above is explored. The study includes the collection of qualitative and quantitative data consisting of a literature review, focus groups and survey. Recommendations for the future development of design education programs in Queensland, Australia are proposed, and future research opportunities are presented and discussed.