Desafios Para A Implementação Do Processo De Projeto Colaborativo: Análise Do Fator Humano

The ineffectiveness of current design processes has been well studied and has resulted in widespread calls for the evolution and development of new management processes. Perhaps one problem is that with the advent of BIM we are moving from one stage to another without necessarily having resolved all the issues. CAD design technology, if well handled, could have significantly raised the level of quality and efficiency of current processes, but in practice this was not fully realized. Therefore, technology alone can´t solve all the problems and the advent of BIM could result in a similar bottleneck. For a precise definition of the problem to be solved we should start by understanding what are the main current bottlenecks that have yet to be overcome by either new technologies or management processes, and the impact of human behavior related issues despite the advent of new technologies. The fragmented and dispersed nature of the AEC sector and the huge number of small organizations that comprise it would probably be a major limiting factor. Several authors have addressed this issue and more recently IDDS has been defined as the highest level of achievement. However, what is written on IDDS shows an extremely ideal situation on a state to be achieved; it shows a holistic utopian proposition with the intent to create the research agenda to move towards that state. Key to IDDS is the framing of a new management model which should address the problems associated with key aspects: technology, processes, policies and people. One of the primary areas to be further studied is the process of collaborative work and understanding, together with the development of proposals to overcome the many cultural barriers that currently exist and impede the advance of new management methods. The purpose of this paper is to define and delimit problems to be solved so that it is possible to implement a new management model for a collaborative design process.

Kehittämistutkimus: Tieto- ja viestintätekniikkaa kemian opetukseen

The main aim of the present study was to develop information and communication technology (ICT) based chemistry education. The goals for the study were to support meaningful chemistry learning, research-based teaching and diffusion of ICT innovations. These goals were used as guidelines that form the theoretical framework for this study. This Doctoral Dissertation is based on eight-stage research project that included three design researches. These three design researches were scrutinized as separate case studies in which the different cases were formed according to different design teams: i) one researcher was in charge of the design and teachers were involved in the research process, ii) a research group was in charge of the design and students were involved in the research process, and iii) the design was done by student teams, the research was done collaboratively, and the design process was coordinated by a researcher. The research projects were conducted using mixed method approach, which enabled a comprehensive view on education design. In addition, the three central areas of design research: problem analysis, design solution and design process were included in the research, which was guided by the main research questions formed according to these central areas: 1) design solution: what kind of elements are included in ICT-based learning environments that support meaningful chemistry learning and diffusion of innovation, 2) problem analysis: what kind of new possibilities the designed learning environments offer for the support of meaningful chemistry learning, and 3) design process: what kind of opportunities and challenges does collaboration bring to the design of ICT-based learning environments? The main research questions were answered according to the analysis of the survey and observation data, six designed learning environments and ten design narratives from the three case studies. Altogether 139 chemistry teachers and teacher students were involved in the design processes. The data was mainly analysed by methods of qualitative content analysis. The first main result from the study give new information on the meaningful chemistry learning and the elements of ICT-based learning environment that support the diffusion of innovation, which can help in the development of future ICT-education design. When the designed learning environment was examined in the context of chemistry education, it was evident that an ICT-based chemistry learning environment supporting the meaningful learning of chemistry motivates the students and makes the teacher s work easier. In addition, it should enable the simultaneous fulfilment of several pedagogical goals and activate higher-level cognitive processes. The learning environment supporting the diffusion of ICT innovation is suitable for Finnish school environment, based on open source code, and easy to use with quality chemistry content. According to the second main result, new information was acquired about the possibilities of ICT-based learning environments in supporting meaningful chemistry learning. This will help in setting the goals for future ICT education. After the analysis of design solutions and their evaluations, it can be said that ICT enables the recognition of all elements that define learning environments (i.e. didactic, physical, technological and social elements). The research particularly demonstrates the significance of ICT in supporting students motivation and higher-level cognitive processes as well as versatile visualization resources for chemistry that ICT makes possible. In addition, research-based teaching method supports well the diffusion of studied innovation on individual level. The third main result brought out new information on the significance of collaboration in design research, which guides the design of ICT education development. According to the analysis of design narratives, it can be said that collaboration is important in the execution of scientifically reliable design research. It enables comprehensive requirement analysis and multifaceted development, which improves the reliability and validity of the research. At the same time, it sets reliability challenges by complicating documenting and coordination, for example. In addition, a new method for design research was developed. Its aim is to support the execution of complicated collaborative design projects. To increase the reliability and validity of the research, a model theory was used. It enables time-pound documenting and visualization of design decisions that clarify the process. This improves the reliability of the research. The validity of the research is improved by requirement definition through models. This way learning environments that meet the design goals can be constructed. The designed method can be used in education development from comprehensive to higher level. It can be used to recognize the needs of different interest groups and individuals with regard to processes, technology and substance knowledge as well as interfaces and relations between them. The developed method has also commercial potential. It is used to design learning environments for national and international market.

A process model based methodology to support conflict management

The product design development has increasingly become a collaborative process. Conflicts often appear in the design process due to multi-actors interactions. Therefore, a critical element of collaborative design would be conflict situations resolution. In this paper, a methodology, based on a process model, is proposed to support conflict management. This methodology deals mainly with the conflict resolution team identification and the solution impact evaluation issues. The proposed process model allows the design process traceability and the data dependencies network identification; which making it be possible to identify the conflict resolution actors as well as to evaluate the selected solution impact. Copyright © 2006 IFAC.

A Designer’s Approach: Exploring how Autistic Adults with Additional Learning Disabilities Experience their Home Environment

Autistic adults with limited speech and additional learning disabilities are people whose perceptions and interactions with their environment are unique, but whose experiences are under-explored in design research. This PhD by Practice investigates how people with autism experience their home environment through a collaboration with the autism charity Kingwood Trust, which gave the designer extensive access to a community of autistic adults that it supports. The PhD reflects upon a neurotypical designer’s approach to working with autistic adults to investigate their relationship with the environment. It identifies and develops collaborative design tools for autistic adults, their support staff and family members to be involved. The PhD presents three design studies that explore a person’s interaction with three environmental contexts of the home i.e. garden, everyday objects and interiors. A strengths-based rather than a deficit-based approach is adopted which draws upon an autistic person’s sensory preferences, special interests and action capabilities, to unravel what discomfort and delight might mean for an autistic person; this approach is translated into three design solutions to enhance their experience at home. By working beyond the boundaries of a neurotypical culture, the PhD bridges the autistic and neurotypical worlds of experience and draws upon what the mainstream design field can learn from designing with autistic people with additional learning disabilities. It also provides insights into the subjective experiences of people who have very different ways of seeing, doing and being in the environment

Desenvolvimento de uma aplicação móvel para apoio a pessoas com perturbações psicóticas

A presente dissertação tem como objectivo descrever o trabalho desenvolvido sobre o projecto iCOPE, uma plataforma dedicada ao auxilio do processo psicoterapêutico para pessoas com perturbações psicóticas. A sua concepção e motivada pela necessidade de fornecer um meio psicoterapêutico com base na portabilidade dos dispositivos móveis. O desenvolvimento foi conseguido através de uma colaboração multidisciplinar, orientada por especialistas de terapia ocupacional, e pela engenharia de software. O iCOPE é um sistema centralizado, no qual o progresso de um paciente é registado e monitorizado através de outra aplicação, por um terapeuta designado. Esta filosofia levou à criação de uma API baseada em REST, capaz de comunicar com uma base de dados. A construção da API concretizou-se com recurso a linguagem PHP, aliada a micro-framework Slim. O objectivo desta API passa não só pela necessidade de fornecer um sistema acessível, mas também com a ambição de conceber uma plataforma com um potencial escalável e expansível, para o caso de ser necessário implementar novas funcionalidades futuras (future-proof). O autor desta dissertação foi responsável pelo levantamento de requisitos, o desenvolvimento da aplicação móvel, o desenvolvimento colaborativo do modelo de dados e base de dados e da interface da API de comunicação. No fim do desenvolvimento foi feita uma apreciação funcional pelos utilizadores alvo, que realizaram uma avaliação sobre a utilização e integração da aplicação no seu tratamento. Face aos resultados obtidos foram tiradas conclusões sobre o futuro desenvolvimento da aplicação e que outros aspectos poderiam ser integrados para efectivamente chegar a mais pacientes.

Modèle novateur de conception d’interface humain-ordinateur centrée sur l’utilisateur : le designer en tant que médiateur

Cette recherche porte sur des questions relatives à la conception des interfaces humain-ordinateur. Elle s’inscrit dans le courant des recherches sur l’utilisabilité et elle s’intéresse particulièrement aux approches centrées sur l’utilisateur. Nous avons été très souvent témoin des difficultés éprouvées par les utilisateurs dans l’usage de certaines interfaces interactives et nous considérons que ces difficultés découlent d’un problème de design. Le design d’interface doit être basé sur les besoins de l’utilisateur dans le cadre de ses activités, dont les caractéristiques devaient être bien comprises et bien prises en considération pour mener à la conception d’interfaces qui respectent les critères d’utilisabilité. De plus, la communauté des chercheurs ainsi que l’industrie admettent maintenant que pour améliorer le design, il est crucial de développer les interfaces humain-ordinateur au sein d’une équipe multidisciplinaire. Malgré les avancées significatives dans le domaine du design centrées sur l’utilisateur, les visées annoncées sont rarement réalisées. La problématique étudiée nous a conduit à poser la question suivante : En tant que designer d’une équipe multidisciplinaire de conception, comment modifier la dynamique de collaboration et créer les conditions d’une conception véritablement centrée sur l’interaction humain-ordinateur ? Notre démarche de recherche a été guidée par l’hypothèse voulant que l’activité de design puisse être le moyen de faciliter la création d’un langage commun, des échanges constructifs entre les disciplines, et une réflexion commune centrée sur l’utilisateur. La formulation de cette hypothèse nous a mené à réfléchir sur le rôle du designer. Pour mener cette recherche, nous avons adopté une méthodologie mixte. Dans un premier temps, nous avons utilisé une approche de recherche par projet (recherche-projet) et notre fonction était celle de designer-chercheur. La recherche-projet est particulièrement appropriée pour les recherches en design. Elle privilégie les méthodes qualitatives et interprétatives ; elle étudie la situation dans sa complexité et de façon engagée. Nous avons effectué trois études de cas successives. L’objectif de la première étude était d’observer notre propre rôle et nos interactions avec les autres membres de l’équipe de projet pendant le processus de design. Dans la seconde étude, notre attention a été portée sur les interactions et la collaboration de l’équipe. Nous avons utilisé le processus de design comme méthode pour la construction d’un langage commun entre les intervenants, pour enrichir les réflexions et pour favoriser leur collaboration menant à redéfinir les objectifs du projet. Les limites de ces deux cas nous ont conduit à une intervention différente que nous avons mise en œuvre dans la troisième étude de cas. Cette intervention est constituée par la mise en place d’un atelier intensif de conception où les intervenants au projet se sont engagés à développer une attitude interdisciplinaire permettant la copratique réflexive pour atteindre les objectifs d’un projet de construction d’un site web complexe centré sur l’utilisateur. L’analyse et l’interprétation des données collectées de ces trois études de cas nous ont conduit à créer un modèle théorique de conception d’interface humain-ordinateur. Ce modèle qui informe et structure le processus de design impliquant une équipe multidisciplinaire a pour objectif d’améliorer l’approche centrée sur l’utilisateur. Dans le cadre de ce modèle, le designer endosse le rôle de médiateur en assurant l’efficacité de la collaboration de l’équipe. Dans un deuxième temps, afin de valider le modèle et éventuellement le perfectionner, nous avons utilisé une approche ethnographique comportant des entrevues avec trois experts dans le domaine. Les données des entrevues confirment la validité du modèle ainsi que son potentiel de transférabilité à d’autres contextes. L’application de ce modèle de conception permet d’obtenir des résultats plus performants, plus durables, et dans un délai plus court.

El análisis de la construcción sin pérdidas (Lean Construction) y su relación con el Project & Construction Management : propuesta de regulación en España y su inclusión en la ley de la ordenación de la edificación

El presente trabajo se basa en la filosofía de la Construcción sin Pérdidas (“Lean Construction”), analizando la situación de esta filosofía en el sector de la edificación en el contexto internacional y español, respondiendo las siguientes preguntas: 1. ¿Cómo surge el “Lean Construction”? 2. ¿Cuáles son sus actividades, funciones y cometidos? 3. ¿Existe regulación del ¨Lean Construction” en otros países? 4. ¿Existe demanda del ¨Lean Construction” en España? 5. ¿Existe regulación del ¨Lean Construction” en España? 6. ¿Cómo debería ser la regulación ¨Lean Construction” en España? 7. ¿Cuál es la relación del “Lean Construction” con el “Project & Construction Management”? 8. ¿Cómo debería ser la regulación de “Lean Construction” en España considerando su relación con el “Project & Construction Management”? Las preguntas indicadas las hemos respondido detalladamente en el presente trabajo, a continuación se resume las respuestas a dichas preguntas: 1. El “Lean Construction” surge en agosto de 1992, cuando el investigador finlandés Lauri Koskela publicó en la Universidad de Stanford el reporte TECHNICAL REPORT N° 72 titulado “Application of the New Production Philosophy to Construction”. Un año más tarde el Dr. Koskela invitó a un grupo de especialistas en construcción al primer workshop de esta materia en Finlandia, dando origen al International Group for Lean Construction (IGLC) lo que ha permitido extender la filosofía a EEUU, Europa, América, Asia, Oceanía y África. “Lean Construction” es un sistema basado en el enfoque “Lean Production” desarrollado en Japón por Toyota Motors a partir de los años cincuenta, sistema que permitió a sus fábricas producir unidades con mayor eficiencia que las industrias americanas, con menores recursos, en menor tiempo, y con un número menor de errores de fabricación. 2. El sistema “Lean Construction” busca maximizar el valor y disminuir las pérdidas de los proyectos generando una coordinación eficiente entre los involucrados, manejando un proyecto como un sistema de producción, estrechando la colaboración entre los participantes de los proyectos, capacitándoles y empoderándoles, fomentando una cultura de cambio. Su propósito es desarrollar un proceso de construcción en el que no hayan accidentes, ni daños a equipos, instalaciones, entorno y comunidad, que se realice en conformidad con los requerimientos contractuales, sin defectos, en el plazo requerido, respetando los costes presupuestados y con un claro enfoque en la eliminación o reducción de las pérdidas, es decir, las actividades que no generen beneficios. El “Last Planner System”, o “Sistema del Último Planificador”, es un sistema del “Lean Construction” que por su propia naturaleza protege a la planificación y, por ende, ayuda a maximizar el valor y minimizar las pérdidas, optimizando de manera sustancial los sistemas de seguridad y salud. El “Lean Construction” se inició como un concepto enfocado a la ejecución de las obras, posteriormente se aplicó la filosofía a todas las etapas del proyecto. Actualmente considera el desarrollo total de un proyecto, desde que nace la idea hasta la culminación de la obra y puesta en marcha, considerando el ciclo de vida completo del proyecto. Es una filosofía de gestión, metodologías de trabajo y una cultura empresarial orientada a la eficiencia de los procesos y flujos. La filosofía “Lean Construction” se está expandiendo en todo el mundo, además está creciendo en su alcance, influyendo en la gestión contractual de los proyectos. Su primera evolución consistió en la creación del sistema “Lean Project Delivery System”, que es el concepto global de desarrollo de proyectos. Posteriormente, se proponen el “Target Value Design”, que consiste en diseñar de forma colaborativa para alcanzar los costes y el valor requerido, y el “Integrated Project Delivery”, en relación con sistemas de contratos relacionales (colaborativos) integrados, distintos a los contratos convencionales. 3. Se verificó que no existe regulación específica del ¨Lean Construction” en otros países, en otras palabras, no existe el agente con el nombre específico de “Especialista en Lean Construction” o similar, en consecuencia, es un agente adicional en el proyecto de la edificación, cuyas funciones y cometidos se pueden solapar con los del “Project Manager”, “Construction Manager”, “Contract Manager”, “Safety Manager”, entre otros. Sin embargo, se comprobó la existencia de formatos privados de contratos colaborativos de Integrated Project Delivery, los cuales podrían ser tomados como unas primeras referencias para futuras regulaciones. 4. Se verificó que sí existe demanda del ¨Lean Construction” en el desarrollo del presente trabajo, aunque aún su uso es incipiente, cada día existe más interesados en el tema. 5. No existe regulación del ¨Lean Construction” en España. 6. Uno de los objetivos fundamentales de esta tesis es el de regular esta figura cuando actúe en un proyecto, definir y realizar una estructura de Agente de la Edificación, según la Ley de Ordenación de la Edificación (LOE), y de esta manera poder introducirla dentro de la Legislación Española, protegiéndola de eventuales responsabilidades civiles. En España existe jurisprudencia (sentencias de los tribunales de justicia españoles) con jurisdicción civil basada en la LOE para absolver o condenar a agentes de la edificación que son definidos en los tribunales como “gestores constructivos” o similares. Por este motivo, en un futuro los tribunales podrían dictaminar responsabilidades solidarias entre el especialista “Lean Construction” y otros agentes del proyecto, dependiendo de sus actuaciones, y según se implemente el “Lean Project Delivery System”, el “Target Value Design” y el “Integrated Project Delivery”. Por otro lado, es posible que el nivel de actuación del especialista “Lean Construcción” pueda abarcar la gestión del diseño, la gestión de la ejecución material (construcción), la gestión de contratos, o la gestión integral de todo el proyecto de edificación, esto último, en concordancia con la última Norma ISO 21500:2012 o UNE-ISO 21500:2013 Directrices para la dirección y gestión de proyectos. En consecuencia, se debería incorporar adecuadamente a uno o más agentes de la edificación en la LOE de acuerdo a sus funciones y responsabilidades según los niveles de actuación del “Especialista en Lean Construction”. Se propone la creación de los siguientes agentes: Gestor del Diseño, Gestor Constructivo y Gestor de Contratos, cuyas definiciones están desarrolladas en este trabajo. Estas figuras son definidas de manera general, puesto que cualquier “Project Manager” o “DIPE”, gestor BIM (Building Information Modeling), o similar, puede actuar como uno o varios de ellos. También se propone la creación del agente “Gestor de la Construcción sin Pérdidas”, como aquel agente que asume las actuaciones del “gestor de diseño”, “gestor constructivo” y “gestor de contratos” con un enfoque en los principios del Lean Production. 7. En la tesis se demuestra, por medio del uso de la ISO 21500, que ambos sistemas son complementarios, de manera que los proyectos pueden tener ambos enfoques y ser compatibilizados. Un proyecto que use el “Project & Construction Management” puede perfectamente apoyarse en las herramientas y técnicas del “Lean Construction” para asegurar la eliminación o reducción de las pérdidas, es decir, las actividades que no generen valor, diseñando el sistema de producción, el sistema de diseño o el sistema de contratos. 8. Se debería incorporar adecuadamente al agente de la edificación “Especialista en Lean Construction” o similar y al agente ¨Especialista en Project & Construction Management” o DIPE en la Ley de Ordenación de la Edificación (LOE) de acuerdo a sus funciones y responsabilidades, puesto que la jurisprudencia se ha basado para absolver o condenar en la referida Ley. Uno de los objetivos fundamentales de esta tesis es el de regular la figura del “Especialista en Lean Construction” cuando actúa simultáneamente con el DIPE, y realizar una estructura de Agente de la Edificación según la LOE, y de esta manera protegerlo de eventuales responsabilidades solidarias. Esta investigación comprueba que la propuesta de definición del agente de edificación DIPE, según la LOE, presentada en la tesis doctoral del Doctor Manuel Soler Severino es compatible con las nuevas definiciones propuestas. El agente DIPE puede asumir los roles de los diferentes gestores propuestos en esta tesis si es que se especializa en dichas materias, o, si lo estima pertinente, recomendar sus contrataciones. ABSTRACT This work is based on the Lean Construction philosophy; an analysis is made herein with regard to the situation of this philosophy in the building sector within the international and Spanish context, replying to the following questions: 1. How did the concept of Lean Construction emerge? 2. Which are the activities, functions and objectives of Lean Construction? 3. Are there regulations on Lean Construction in other countries? 4. Is there a demand for Lean Construction in Spain? 5. Are there regulations on Lean Construction in Spain? 6. How should regulations on Lean Construction be developed in Spain? 7. What is the relationship between Lean Construction and the Project & Construction Management? 8. How should regulations on Lean Construction be developed in Spain considering its relationship with the Project & Construction Management? We have answered these questions in detail here and the replies are summarized as follows: 1. The concept of Lean Construction emerged in august of 1992, when Finnish researcher Lauri Koskela published in Stanford University TECHNICAL REPORT N° 72 entitled “Application of the New Production Philosophy to Construction”. A year later, Professor Koskela invited a group of construction specialists to Finland to the first workshop conducted on this matter; thus, the International Group for Lean Construction (IGLC) was established, which has contributed to extending the philosophy to the United States, Europe, the Americas, Asia, Oceania, and Africa. Lean Construction is a system based on the Lean Production approach, which was developed in Japan by Toyota Motors in the 1950s. Thanks to this system, the Toyota plants were able to produce more units, with greater efficiency than the American industry, less resources, in less time, and with fewer manufacturing errors. 2. The Lean Construction system aims at maximizing the value of projects while reducing waste, producing an effective coordination among those involved; it manages projects as a production system, enhancing collaboration between the parties that participate in the projects while building their capacities, empowering them, and promoting a culture of change. Its purpose is to develop a construction process free of accidents, without damages to the equipment, facilities, environment and community, flawless, in accordance with contractual requirements, within the terms established, respecting budgeted costs, and with a clear approach to eliminating or reducing waste, that is, activities that do not generate benefits. The Last Planner System is a Lean Construction system, which by its own nature protects planning and, therefore, helps to maximize the value and minimize waste, optimizing substantially the safety and health systems. Lean Construction started as a concept focused on the execution of works, and subsequently the philosophy was applied to all the stages of the project. At present it considers the project’s total development, since the time ideas are born until the completion and start-up of the work, taking into account the entire life cycle of the project. It is a philosophy of management, work methodologies, and entrepreneurial culture aimed at the effectiveness of processes and flows. The Lean Construction philosophy is extending all over the world and its scope is becoming broader, having greater influence on the contractual management of projects. It evolved initially through the creation of the Lean Project Delivery System, a global project development concept. Later on, the Target Value Design was developed, based on collaborative design to achieve the costs and value required, as well as the Integrated Project Delivery, in connection with integrated relational (collaborative) contract systems, as opposed to conventional contracts. 3. It was verified that no specific regulations on Lean Construction exist in other countries, in other words, there are no agents with the specific name of “Lean Construction Specialist” or other similar names; therefore, it is an additional agent in building projects, which functions and objectives can overlap those of the Project Manager, Construction Manager, Contract Manager, or Safety Manager, among others. However, the existence of private collaborative contracts of Integrated Project Delivery was confirmed, which could be considered as first references for future regulations. 4. There is a demand for Lean Construction in the development of this work; even though it is still emerging, there is a growing interest in this topic. 5. There are no regulations on Lean Construction in Spain. 6. One of the main objectives of this thesis is to regulate this role when acting in a project, and to define and develop a Building Agent structure, according to the Building Standards Law (LOE by its acronym in Spanish), in order to be able to incorporate it into the Spanish law, protecting it from civil liabilities. In Spain there is jurisprudence in civil jurisdiction based on the LOE to acquit or convict building agents, which are defined in the courts as “construction managers” or similar. For this reason, courts could establish in the future joint and several liabilities between the Lean Construction Specialist and other agents of the project, depending on their actions and based on the implementation of the Lean Project Delivery System, the Target Value Design, and the Integrated Project Delivery. On the other hand, it is possible that the level of action of the Lean Construction Specialist may comprise design management, construction management and contract management, or the integral management of the entire building project in accordance with the last ISO 21500:2012 or UNE-ISO 21500:2013, guidelines for the management of projects. Accordingly, one or more building agents should be appropriately incorporated into the LOE according to their functions and responsibilities and based on the levels of action of the Lean Construction Specialist. The creation of the following agents is proposed: Design Manager, Construction Manager, and Contract Manager, which definitions are developed in this work. These agents are defined in general, since any Project Manager or DIPE, Building Information Modeling (BIM) Manager or similar, may act as one or as many of them. The creation of the Lean Construction Manager is also proposed, as the agent that takes on the role of the Design Manager, Construction Manager and Contract Manager with a focus on the Lean Production principles. 7. In the thesis it is demonstrated that through the implementation of the ISO 21500, both systems are supplementary, so projects may have both approaches and be compatible. A project that applies the Project & Construction Management may perfectly have the support of the tools, techniques and practices of Lean Construction to ensure the elimination or reduction of losses, that is, those activities that do not generate value, thus designing the production system, the design system, or the contract system. 8. The Lean Construction Specialist or similar and the Specialist in Project & Construction Management should be incorporated appropriately into the LOE according to their functions and responsibilities, since jurisprudence has been based on such Law to acquit or convict. One of the main objectives of this thesis is the regulate the role of the Lean Construction Specialist when acting simultaneously with the DIPE, and to develop a structure of the building agent, according to the LOE, and in this way protect such agent from joint and several liabilities. This research proves that the proposal to define the DIPE building agent, according to the LOE, and presented in the doctoral dissertation of Manuel Soler Severino, Ph.D. is compatible with the new definitions proposed. The DIPE agent may assume the roles of the different managers proposed in this thesis if he specializes in those topics or, if deemed pertinent, recommends that they be engaged.

Sistema colaborativo de detección y seguimiento de anomalías mediante visión por computador

En este proyecto se realiza el diseño e implementación de un sistema que detecta anomalías en las entradas de entornos controlados. Para ello, se hace uso de las últimas técnicas en visión por computador y se avisa visual y auditivamente, mediante un sistema hardware que recibe señales del ordenador al que está conectado. Se marca y fotografía, a una o varias personas, que cometen una infracción en las entradas de un establecimiento, vigilado con sistemas de vídeo. Las imágenes se almacenan en las carpetas correspondientes. El sistema diseñado es colaborativo, por lo tanto, las cámaras que intervienen, se comunican entre ellas a través de estructuras de datos con el objetivo de intercambiar información. Además, se utiliza conexión inalámbrica desde un dispositivo móvil para obtener una visión global del entorno desde cualquier lugar del mundo. La aplicación se desarrolla en el entorno MATLAB, que permite un tratamiento de la señal de imagen apropiado para el presente proyecto. Asimismo, se proporciona al usuario una interfaz gráfica con la que interactuar de manera sencilla, evitando así, el cambio de parámetros en la estructura interna del programa cuando se quiere variar el entorno o el tipo de adquisición de datos. El lenguaje que se escoge facilita la ejecución en distintos sistemas operativos, incluyendo Windows o iOS y, de esta manera, se proporciona flexibilidad. ABSTRACT. This project studies the design and implementation of a system that detects any anomalies on the entrances to controlled environments. To this end, it is necessary the use of last techniques in computer vision in order to notify visually and aurally, by a hardware system which receives signs from the computer it is connected to. One or more people that commit an infringement while entering into a secured environment, with video systems, are marked and photographed and those images are stored in their belonging file folder. This is a collaborative design system, therefore, every involved camera communicates among themselves through data structures with the purpose of exchanging information. Furthermore, to obtain a global environment vision from any place in the world it uses a mobile wireless connection. The application is developed in MATLAB environment because it allows an appropriate treatment of the image signal for this project. In addition, the user is given a graphical interface to easily interact, avoiding with this, changing any parameters on the program’s intern structure, when it requires modifying the environment or the data type acquisition. The chosen language eases its execution in different operating systems, including Windows or iOS, providing flexibility.

Aprender conociendo a las personas usuarias de los servicios

Se presentan tres experiencias de innovación docente realizadas en la asignatura de Iniciación a las Habilidades Profesionales, primer curso del Grado en Trabajo Social, Universidad de Alicante. Objetivos: 1) Implicar en la docencia a las personas usuarias de los servicios, considerándolos expertos por su experiencia personal con Trabajadores Sociales y con la sociedad en general. 2) Proporcionar un contexto de aprendizaje que permita conocer, comprender y aprender a comunicarse profesionalmente con personas usuarias de servicios. Metodología: Aprendizaje significativo basado en la interacción con personas usuarias de los servicios con tres modalidades: a) Diseño conjunto de actividades de enseñanza-aprendizaje entre una entidad social y el profesorado de la asignatura Iniciación a las Habilidades Profesionales del Grado en Trabajo Social de la Universidad de Alicante; b) Diseño con enfoque multidisciplinar (profesorado de Trabajo Social con el profesorado de Ciencias de la Actividad Física y Deporte) y la entidad social; c) Diseño internacional con participación de las universidades Queen’s University, Belfast (Northern Ireland) (coordinadora del proyecto) junto con las universidades de Ljubljana (Slovenia) y Alicante. Los resultados proporcionan evidencias sobre la pertinencia de la colaboración docente de personas expertas por su experiencia y de la utilización de una metodología docente basada en el aprendizaje significativo para la adquisición de competencias.

La participación ciudadana como instrumento para la planificación e investigación social en turismo

Este trabajo profundiza en el potencial de la participación ciudadana como herramienta para el diagnóstico y planificación turística, así como fuente de conocimiento para el científico social. Se expone la metodología y principales resultados de un proceso participativo en un municipio turístico-residencial dirigido al diseño colaborado de propuestas de actuación a escala local. Este proceso ofreció un espacio para la reflexión ciudadana sobre las implicaciones del modelo turístico-urbanístico y sus posibilidades de futuro, y proporcionó un mecanismo para el acercamiento de las necesidades y opiniones ciudadanas a los procesos de planificación y toma de decisiones municipales. Además, a partir de un análisis de contenido de los documentos elaborados por los participantes, se demuestra la utilidad de la participación ciudadana como recurso de alta riqueza informativa para la investigación social en el ámbito del turismo.

Guest editorial:special issue on digitial enterprise technology

Full text This Proceedings volume contains selected papers from the Fourth International CIRP-sponsored, Conference on Digital Enterprise Technology (DET2007), which was held at the University of Bath, UK, 19–21 September 2007. All selected papers have been suitably enhanced for publication in the Journal and have undergone full review. Digital enterprise technology (DET) is ‘the collection of systems and methods for the digital modelling and analysis of the global product development and realization process, in the context of lifecycle management.’ The principal aim of the DET concept is to provide a coherent context for the development and integration of the various digital technologies that underpin modern design and manufacturing. These technologies can be classified according to the following five key areas. 1. Distributed and collaborative design. 2. Process modelling and process planning. 3. Advanced factory design and modelling. 4. Physical-to-digital environment integrators–verification. 5. Enterprise integration technologies. This special issue is representative of the wide breadth of the DET concept including; a comprehensive review of digital engineering, design processes, digital modelling of machine tools, forming, robotics and machining processes, verification and metrology, and dynamic networks. It is particularly pleasing to see the development of metrology as a key aspect of modern manufacturing technology, linking design intent to process capability. The papers published herein will facilitate the exploration of new and evolving research concepts by the international research community and will influence the development of international standards for the application of DET technologies.

ProjectION: Investigation Operative Networks

Corporations and enterprises have embraced the notion of shared experiences and collective workplaces by incorporating coworking places. A great deal of the methodology carries from the studio culture that architecture schools foster as well as think tank culture. Maker spaces and incubator spaces are prime examples of places that engender creative thought and products. This thesis seeks to explore the impact that architecture has on collaborative spaces with a focus on augmenting to their generated learning and design activities. The investigation explores the collaborative design process as a series of interactions between groups of individuals. This involves the impact of technology and its implications on those interactions. The goal of this thesis is not to further the use of a tool or systematic procedure, but to use architecture as a framing device to form places for collaborative processes.