Controlo da velocidade e posição de um tapete rolante

A utilização eficiente da energia é essencial para a competitividade económica de um país. Sendo a intensidade energética de Portugal elevada, onde a utilização de motores elétricos, absorve cerca de metade da energia elétrica consumida na indústria, a utilização de conversores eletrónicos de potência permite obter economias de energia. Nesta tese pretende-se controlar a velocidade e o posicionamento de um tapete rolante através da utilização de um conversor eletrónico de potência. Na fundamentação teórica são referidos os conceitos de variação da tensão e frequência, controle escalar e vetorial, modelação por largura de pulso (PWM) assim como a retificação e ondulação da tensão de um variador de velocidades. Na parte prática será utilizado um servo motor, controlado por um variador eletrónico de velocidades, para efetuar o referido projeto. É ainda objeto desta tese o estudo dos parâmetros fundamentais assim como a pesquisa dos parâmetros a utilizar para o desempenho pretendido.

Distributed Sensing of Fluid Dynamic Phenomena with the XDense Sensor Grid Network

IEEE International Conference on Cyber Physical Systems, Networks and Applications (CPSNA'15), Hong Kong, China.

Nonlinear dynamics of the patient’s response to drug effect during general anesthesia

In today’s healthcare paradigm, optimal sedation during anesthesia plays an important role both in patient welfare and in the socio-economic context. For the closed-loop control of general anesthesia, two drugs have proven to have stable, rapid onset times: propofol and remifentanil. These drugs are related to their effect in the bispectral index, a measure of EEG signal. In this paper wavelet time–frequency analysis is used to extract useful information from the clinical signals, since they are time-varying and mark important changes in patient’s response to drug dose. Model based predictive control algorithms are employed to regulate the depth of sedation by manipulating these two drugs. The results of identification from real data and the simulation of the closed loop control performance suggest that the proposed approach can bring an improvement of 9% in overall robustness and may be suitable for clinical practice.

Energy Harvesting for Autonomous Underwater Vehicles

In this study, energy production for autonomous underwater vehicles is investigated. This project is part of a bigger project called TURTLE. The autonomous vehicles perform oceanic researches at seabed for which they are intended to be kept operational underwater for several months. In order to ful l a long-term underwater condition, powerful batteries are combined with \micro- scale" energy production on the spot. This work tends to develop a system that generates power up to a maximum of 30 W. Latter energy harvesting structure consists basically of a turbine combined with a generator and low-power electronics to adjust the achieved voltage to a required battery charger voltage. Every component is examined separately hence an optimum can be de ned for all, and subsequently also an overall optimum. Di erent design parameters as e.g. number of blades, solidity ratio and cross-section area are compared for di erent turbines, in order to see what is the most feasible type. Further, a generator is chosen by studying how ux distributions might be adjusted to low velocities, and how cogging torque can be excluded by adapted designs. Low-power electronics are con gured in order to convert and stabilize heavily varying three-phase voltages to a constant, recti ed voltage which is usable for battery storage. Clearly, di erent component parameters as maximum power and torque are matched here to increase the overall power generation. Furthermore an overall maximum power is set up for achieving a maximum power ow at load side. Due to among others typical low velocities of about 0.1 to 0.5 m/s, and constructing limits of the prototype, the vast range of components is restricted to only a few that could be used. Hence, a helical turbine is combined in a direct drive mode to a coreless-stator axial- ux permanent-magnet generator, from which the output voltage is adjusted subsequently by a recti er, impedance matching unit, upconverter circuit and an overall control unit to regulate di erent component parameters. All these electronics are combined in a closed-loop design to involve positive feedback signals. Furthermore a theoretical con guration for the TURTLE vehicle is described in this work and a solution is proposed that might be implemented, for which several design tests are performable in a future study.

Visualizing control systems performance: A fractional perspective

This article presents a novel method for visualizing the control systems behavior. The proposed scheme uses the tools of fractional calculus and computes the signals propagating within the system structure as a time/frequency-space wave. Linear and nonlinear closed-loop control systems are analyzed, for both the time and frequency responses, under the action of a reference step input signal. Several nonlinearities, namely, Coulomb friction and backlash, are also tested. The numerical experiments demonstrate the feasibility of the proposed methodology as a visualization tool and motivate its extension for other systems and classes of nonlinearities.

Recursive neuro fuzzy techniques for online identification and control

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores

Avaliação clínica na disfunção fronto-estriatal : movimento e cognição

RESUMO: Os circuitos fronto-estriatais constituem um sistema em ansa fechada que une diversas regiões do lobo frontal aos gânglios da base, participando, com outras áreas cerebrais, no controlo do movimento, cognição e comportamento. As Distonias Primárias, a Doença de Parkinson e a Hidrocefalia de Pressão Normal, são doenças do movimento caracterizadas por disfunção do circuito fronto-estriatal motor. A conectividade funcional entre as diversas ansas do sistema fronto-estriatal, permite prever que as doenças do movimento possam também acompanhar-se de sintomas da esfera cognitiva e comportamental, cuja avaliação seria importante no manejo diagnóstico e terapêutico dos doentes. Objectivos Os nossos objectivos foram avaliar, por estudos clínicos, a relação entre sintomas motores, cognitivos e comportamentais em três doenças do movimento com fisiopatologias diversas - distonias Primárias, Doença de Parkinson e Hidrocefalia de Pressão Normal - analisando os dados sob a perspectiva teórica fornecida pelo conhecimentos dos vários circuitos frontoestriatais. Os nossos objectivos específicos para cada doença foram: a) Distonias Primárias: avaliação de disfunção executiva em doentes com Distonia Primária e relação com a gravidade dos sintomas motores b) Doença de Parkinson: 1. avaliação breve das funções mentais nas fases iniciais da doença, incluindo análise longitudinal para determinação de factores preditivos para declínio cognitivo; 2. relação entre a função motora e cognitiva e a Perturbação do Comportamento do sono REM, incluindo análise longitudinal; 3.avaliação de sintomas psiquiátricos, de um ponto de vista global e especificamente com incidência sobre as Perturbações do Controlo do Impulso (PCI). c) Hidrocefalia de Pressão Normal: 1. caracterização das alterações da marcha, incluindo comparação com a Doença de Parkinson; 2. caracterização das alterações cognitivas e da relação entre estas e a disfunção da marcha; 3. estudo evolutivo das alterações da marcha e cognitiva em doentes submetido a cirurgia e doentes não submetidos a cirurgia. Métodos: A Distonia Primária, a Doença de Parkinson e a Hidrocefalia de Pressão Normal foram diagnosticadas segundo critérios clínicos validados. Sempre que justificado, foram recrutados grupos de controlo, com indivíduos sem doença, emparelhados para idade, sexo e grau de escolaridade. Os doentes foram avaliados com instrumentos de aplicação clinica directa, incluindo escalas de função motora, testes neuropsicológicos globais e dirigidos às funções executivas e escalas de avaliação psiquiátrica. Testes aplicados nas Distonias Primárias: Unified Dystonia Rating Scale, Wisconsin Card Sorting Test, teste de Stroop, teste de cubos da WAIS, Teste de Retenção Visual de Benton; na Doença de Parkinson: Unified Parkinson's Disease Rating Scale, Frontal Assessment Battery (FAB), Mini-Mental State Examination (MMSE), REM-sleep behaviour disorder Questionnaire; Symptom Chek-list 90-R, Brief Psychiatric Rating Scale, FAS (fluência verbal lexical) Nomeação de Animais (Fluência verbal semântica), prova de repetição de dígitos (WAIS), Rey auditory verbal learning test, teste de Stroop, matrizes progressivas de Raven, Questionnaire for Impulsive-Compulsive Disorders; na HPN: prova cronometrada de marcha,MMSE, prova de memória imediata da WAIS, prova de repetição de dígitos (WAIS), FAB, desenho complexo de Rey, teste de Stroop, cancelamento de letras, teste Grooved Pegboard. Os doentes com HPN foram também submetidos a estudo imagiológico. A avaliação estatística foi adaptada às características de cada um dos estudos.Resultados Distonias Primárias: encontrámos défices de função executiva, envolvendo dificuldade na mudança entre sets cognitivos, bem como correlação significativa entre as pontuações nos testes cronometrados e a gravidade dos sintomas motores. Doença de Parkinson: os doentes com DP obtiveram pontuações significativamente inferiores na FAB e em sub-testes do MMSE (memória e função visuo-espacial). A pontuação no MMSE encontrava-se significativamente correlacionada com itens da função motora não relacionados com o tremor. A disfunção da marcha, a disartria, o fenótipo não tremorígeno, a presença de alucinações e pontuação abaixo do ponto de corte na MMSE, foram factores preditivos de demência na avaliação longitudinal. A rigidez e a disartria foram factores preditivos de declínio nas funções frontais. A disfunção frontal foi factor preditivo de declínio na pontuação do MMSE. Encontrámos uma prevalência elevada de RBD nas fases iniciais da DP, que o estudo longitudinal mostrou ser factor preditivo de declínio motor, nomeadamente por agravamento da bradicinésia. Encontrámos também uma prevalência elevada de sintomas psiquiátricos, nomeadamente psicose, depressão, ansiedade, somatização e sintomas obsessivo-compulsivos. As PCI não se encontravam relacionadas com o fenótipo motor, com as complicações motoras do tratamento dopaminérgico ou com a disfunção cognitiva. HPN: os doentes com HPN e os DP apresentaram um padrão disfunção da marcha semelhante, caraterizado por passos curtos, lentidão e dificuldades de equilíbrio, sendo os sintomas mais graves na HPN. Os doentes de Parkinson com maior duração de doença, maior dose de dopaminérgicos e fenótipo motor acinético-rígido apresentaram um padrão de disfunção da marcha de gravidade semelhante ao encontrado na HPN. As alterações vasculares da substância branca, em particular as encontradas na região frontal, encontravam-se negativamente correlacionadas com a melhoria da marcha após PL. O estudo das funções cognitivas mostrou um padrão de atingimento global, com valores mais baixos na cópia do desenho complexo de Rey. Os resultados nas provas de função cognitiva não se encontravam significativamente correlacionados com os resultados na prova da marcha. A progressão na disfunção da marcha encontrava-se relacionada com o tratamento não cirúrgico, idade superior na primeira avaliação, presença de lesões da substância branca, e presença de factores de risco vascular, ao passo que não foram encontrados factores que predissessem de modo significativo o agravamento da função cognitiva. Conclusões: Os resultados dos diversos estudos, evidenciam a presença de alterações cognitivas e comportamentais nas três doenças de movimento. O padrão destas alterações e o modo como estas se relacionaram com os sintomas motores variou de doença para doença. Nas Distonias primárias, a perseveração cognitiva poderá ser o sintoma correspondente à perseveração motora própria da doença, sugerindo disfunção no circuito dorso-lateral frontoestriatal. A correlação entre a gravidade motora da doença e o resultado nos testes cognitivos cronometrados, poderá ser o efeito da relação entre bradicinésia e bradifrenia. Na Doença de Parkinson, o espectro de alterações é mais acentuado, espelhando a disseminação do processo degenerativo no SNC. Para além dos sintomas de disfunção executiva, sugerindo disfunção das tês ansas não motoras, existem sinais de disfunção cognitiva global, estas com uma influência mais significativa no desenvolvimento da demência. A relação entre os diferentes sintomas motores e cognitivos é também complexa, embora se evidencie uma dissociação significativa entre o tremor, sem relação com os sintomas não motores, e os sintomas motores não tremorígenos, relacionados com o declínio cognitivo. Enquanto que a presença de RBD parece ser um factor preditivo de agravamento motor, os sintomas psiquiátricos, também muito frequentes, apresentam uma relação menos clara com a função motora. Destes, os sintomas obsessivo-compulsivos são aqueles que com mais frequência se atribuem a disfunção do sistema fronto-estriatal, nomeadamente da ansa orbito-frontal. As PCI também não mostraram ter relação com os sintomas motores ou cognitivos. Na HPN, é patente o carácter fronto-estriatal das alterações da marcha, demonstrado tanto na sua caracterização quanto no efeito deletério das lesões vasculares da substância branca do lobo frontal na recuperação da marcha após PL. As alterações cognitivas parecem ter um padrão mais difuso, o que talvez explique a falta de correlação com os sintomas motores - esta dissociação pode ser causada quer por diferença nos mecanismos fisiopatológicos quer por presença de comorbilidades cognitivas. --------- ABSTRACT: Fronto-striatal circuits constitute a closed loop system which connects different parts of the frontal lobes to the basal ganglia. They are engaged in motor, cognitive and behavioural control. Primary Dystonia, Parkinson's Disease and Normal-Pressure Hydrocephalus are movement disorders caused by disturbance of the motor fronto-striatal circuit. The existence of cognitive and behavioural dysfunction in these movement disorders is predictable, given the functional connectivity between the several distinct loops of the circuit. Evaluation of cognitive and behavioural dysfunction in these three disorders is thus both of clinical and theoretical relevance. Objectives Our objectives were to evaluate, by clinical means, the relation between motor, cognitive and behavioural symptoms in three movement disorders with different pathophysiological backgrounds - Primary Dystonia, Parkinson's Disease and Normal-Pressure Hydrocephalus - and to analyse the study results under the theoretical framework formed by present knowledge of the fronto-estriatal system. Specific objectives: a) Primary Dystonia: executive dysfunction assessment and correlation analysis with motor dysfunction severity; b) Parkinson's Disease: 1. brief cognitive assessment in the early stages of disease, including a longitudinal analysis for determination of predictive factors for cognitive decline; 2. to investigate the relation between RBD and cognitive and motor dysfunction, including a longitudinal analysis; 3. psychiatric symptom assessment, with particular incidence on Impulse Control Disorders; c) Normal-Pressure Hydrocephalus: 1. gait dysfunction characterization and comparison with Parkinson's Disease patients; 2. determination of cognitive dysfunction profile and its relation with gait dysfunction; 3. follow-up study of cognitive and motor outcome in patients submitted and not submitted to shunt surgery. Methods: Primary Dystonia, Parkinson's Disease and Normal Pressure Hydrocephalus were diagnosed according to clinically validate criteria. Where warranted, we recruited control groups formed by healthy individuals, matched for age, sex and educational level. Patients were evaluated with instruments of direct clinical application, including motor function scales, neuropsychological tests aimed at global and executive functions and psychiatric rating scales. Tests used in Primary Dystonia: Unified Dystonia Rating Scale, Wisconsin Card Sorting Test, Stroop Test, Cube Assembly test (WAIS), Benton’s Visual Retention Test; in Parkinson's Disease: Unified Parkinson's Disease Rating Scale, Frontal Assessment Battery (FAB) , Mini-mental State Examination (MMSE), REM-sleep behavior disorder Questionnaire, Symptom Check-list 90- R, Brief Psychiatric Rating Scale, FAS (phonetic verbal fluency), semantic verbal fluency test, digit span test (WAIS), auditory verbal learning test,Stroop test, Raven's progressive Matrices, Questionnaire for Impulsive-Compulsive Disorders; in NPH: timed walking test, MMSE, immediate memory task (WAIS), digit span test (WAIS), FAB, Rey’s Complex Figure test, Stroop test, letter cancellation test, Perdue Pegboard test. NPH patients were also subjected to an imaging study. Statistics were adapted to the characteristics of each study.Results: Primary Dystonia: we found set-shifting deficits as well as significant correlation between timed neuropsychological tests and dystonia severity. Parkinson's Disease: PD patients had significantly lower scores on the FAB and on the memory and visuo-spatial tests of the MMSE; MMSE scores were significantly correlated to non-tremor motor scores; gait dysfunction and speech scores, non-tremor motor phenotype, hallucinations and scores bellow cut-off on the MMSE were predictive of dementia at follow-up; speech and rigidity scores were predictive of frontal type decline; frontal dysfunction was predictivy of decline in MMSE scores; RBD bradykinesia worsening; psychiatric symptoms were prevalent, particularly Psychosis, Depression, Anxiety, Somatisation and Obsessive-Compulsive Symptoms; Impulse Control Disorders were unrelated to motor phenotype,motor side effects of dopamine treatment and executive function; NPH: gait dysfunction was worse in NPH when compared to PD patients, although the pattern was similarly characterized by slowness, short steps and disequilibrium; PD patients whose gait disturbance was as severe as that of NPH patients were characterized by longer disease duration, predominance of non-tremor motor scores, more advanced disease stage and higher dopamine dose; frontal white matter lesions correlated negatively with improvement after LP; cognitive function assessment revealed wide spread deficits, with lower results on the drawing of the complex figure of Rey, which were not significantly correlated to gait dysfunction; older age, white matter lesions and the presence of vascular risk factors were predictive factors for motor but not cognitive function worsening. Conclusion: Results from our studies highlight the presence of cognitive and behavioural dysfunction in all three movement disorders. Symptom pattern and the relation with ovement derangement varied according to the disease. In Primary Dystonia, set-shifting difficulties could be the cognitive counterpart of motor perseveration characteristic of this disorder, suggesting dysfunction of the dorso-lateral circuit. The relation between timed tests and dystonia severity could suggest a relation between bradyphrenia and bradykinesia in Primary Dystonia. In Parkinson's Disease patients, the spectrum of non-motor symptoms is wider, probably reflecting the spread of neurodegeneration beyond the fronto-striatal circuits. While frontal type deficits predominate, suggestive of dorso-lateral and orbito-frontal dysfunction, non-frontal deficits were also apparent in the initial stages of disease, and were predictive of dementia at follow-up. The relationship between cognitive and motor symptoms is complex, although the results strongly suggest a dissociation between tremor symptoms, which bore no relation with non-motor symptoms, and non-tremor symptoms,whichwas frequent, and a predictive factor for which were related with cognitive decline. While RBD was found to be a predictive factor for bradykinesia worsening, psychiatric symptoms, which were also frequent, showed no apparent relation with motor dysfunction. Relevant to our theoretical consideration was the high prevalence of OCS, which have been attributed to orbito-frontal dysfunction. As to the particular case of ICD, we found no relation either with motor or cognitive dysfunction. The fronto-striatal nature of gait dysfunction in NPH is suggest by the clinical characterization study and by the effects of frontal white matter lesions on gait recovery after LP, whereas cognitive dysfunction presented a more diffuse pattern, which could explain the lack or relation with gait assessment results and also the different outcome on the longitudinal study - this dissociation could be caused by a real difference in pathophysiological mechanisms or, in alternative, be due to the existence of cognitive comorbidities.

Recycled asphalt mixtures with foamed bitumen: an alternative to build ecofriendly road pavements

Nowadays, recycling has become a very important objective for the society in the scope of a closed loop product life cycle. In recent years, new recycling techniques have been developed in the area of road pavements that allow the incorporation of high percentages of reclaimed asphalt (RA) materials in recycled asphalt mixtures. The use of foamed bitumen for production of recycled asphalt mixtures is one of those techniques, which also allows the reduction of the mixing temperatures (warm mix technology). However, it is important to evaluate if this solution can maintain or improve the performance of the resulting mixtures. Thus, the main aim of the present study is to assess the performance of warm recycled asphalt mixtures incorporating foamed bitumen as the new binder and 50% RA, in comparison with a control mixture using conventional bitumen. Four mixtures have been produced with 50% RA, one of them at typical high mixing temperatures with a conventional bitumen (control mixture) and the other three with foamed bitumen at different production temperatures. These four mixtures were tested to evaluate their compactability and water sensitivity. The laboratory test results showed that the production of recycled mixtures with foamed bitumen can be reduced by 40ºC without changing the performance of the resulting mixtures.

Sustainability assessment of envelope wall solutions using MAXergy methodology

Projeto de investigação integrado de International Master in Sustainable Built Environment

Dynamic stackelberg game with risk-averse players: optimal risk-sharing under asymmetric information

The objective of this paper is to clarify the interactive nature of the leader-follower relationship when both players are endogenously risk-averse. The analysis is placed in the context of a dynamic closed-loop Stackelberg game with private information. The case of a risk-neutral leader, very often discussed in the literature, is only a borderline possibility in the present study. Each player in the game is characterized by a risk-averse type which is unknown to his opponent. The goal of the leader is to implement an optimal incentive compatible risk-sharing contract. The proposed approach provides a qualitative analysis of adaptive risk behavior profiles for asymmetrically informed players in the context of dynamic strategic interactions modelled as incentive Stackelberg games.

Ecologie industrielle de l'aluminium, flux de matières et d'énergie : réalités et enjeux du recyclage

Dans les dernières années du 20ème siècle, l'aluminium a fait l'objet de beaucoup de communications outrancières et divergentes cautionnées par des scientifiques et des organismes faisant autorité. En 1986, la société PECHINEY le décrète perpétuel tel le mouvement « L'aluminium est éternel. Il est recyclable indéfiniment sans que ses propriétés soient altérées », ce qui nous avait alors irrité. Peu de temps après, en 1990, une communication tout aussi outrancière et irritante d'une grande organisation environnementale, le World Wild Fund, décrète que « le recyclage de l'aluminium est la pire menace pour l'environnement. Il doit être abandonné ». C'est ensuite à partir de la fin des années 1990, l'explosion des publications relatives au développement durable, le bien mal nommé. Au développement, synonyme de croissance obligatoire, nous préférons société ou organisation humaine et à durable, mauvaise traduction de l'anglais « sustainable », nous préférons supportable : idéalement, nous aurions souhaité parler de société durable, mais, pour être compris de tous, nous nous sommes limités à parler dorénavant de développement supportable. Pour l'essentiel, ces publications reconnaissent les très graves défauts de la métallurgie extractive de l'aluminium à partir du minerai et aussi les mérites extraordinaires du recyclage de l'aluminium puisqu'il représente moins de 10% de la consommation d'énergie de la métallurgie extractive à partir du minerai (on verra que c'est aussi moins de 10% de la pollution et du capital). C'est précisément sur le recyclage que se fondent les campagnes de promotion de l'emballage boisson, en Suisse en particulier. Cependant, les données concernant le recyclage de l'aluminium publiées par l'industrie de l'aluminium reflètent seulement en partie ces mérites. Dans les années 1970, les taux de croissance de la production recyclée sont devenus plus élevés que ceux de la production électrolytique. Par contre, les taux de recyclage, établis à indicateur identique, sont unanimement tous médiocres comparativement à d'autres matériaux tels le cuivre et le fer. Composante de l'industrie de l'aluminium, le recyclage bénéficie d'une image favorable auprès du grand public, démontrant le succès des campagnes de communication. A l'inverse, à l'intérieur de l'industrie de l'aluminium, c'est une image dévalorisée. Les opinions émises par tous les acteurs, commerçants, techniciens, dirigeants, encore recueillies pendant ce travail, sont les suivantes : métier de chiffonnier, métier misérable, métier peu technique mais très difficile (un recycleur 15 d'aluminium n'a-t-il pas dit que son métier était un métier d'homme alors que celui du recycleur de cuivre était un jeu d'enfant). A notre avis ces opinions appartiennent à un passé révolu qu'elles retraduisent cependant fidèlement car le recyclage est aujourd'hui reconnu comme une contribution majeure au développement supportable de l'aluminium. C'est bien pour cette raison que, en 2000, l'industrie de l'aluminium mondiale a décidé d'abandonner le qualificatif « secondaire » jusque là utilisé pour désigner le métal recyclé. C'est en raison de toutes ces données discordantes et parfois contradictoires qu'a débuté ce travail encouragé par de nombreuses personnalités. Notre engagement a été incontestablement facilité par notre connaissance des savoirs indispensables (métallurgie, économie, statistiques) et surtout notre expérience acquise au cours d'une vie professionnelle menée à l'échelle mondiale dans (recherche et développement, production), pour (recherche, développement, marketing, stratégie) et autour (marketing, stratégie de produits connexes, les ferro-alliages, et concurrents, le fer) de l'industrie de l'aluminium. Notre objectif est de faire la vérité sur le recyclage de l'aluminium, un matériau qui a très largement contribué à faire le 20ème siècle, grâce à une revue critique embrassant tous les aspects de cette activité méconnue ; ainsi il n'y a pas d'histoire du recyclage de l'aluminium alors qu'il est plus que centenaire. Plus qu'une simple compilation, cette revue critique a été conduite comme une enquête scientifique, technique, économique, historique, socio-écologique faisant ressortir les faits principaux ayant marqué l'évolution du recyclage de l'aluminium. Elle conclut sur l'état réel du recyclage, qui se révèle globalement satisfaisant avec ses forces et ses faiblesses, et au-delà du recyclage sur l'adéquation de l'aluminium au développement supportable, adéquation largement insuffisante. C'est pourquoi, elle suggère les thèmes d'études intéressant tous ceux scientifiques, techniciens, historiens, économistes, juristes concernés par une industrie très représentative de notre monde en devenir, un monde où la place de l'aluminium dépendra de son aptitude à satisfaire les critères du développement supportable. ABSTRACT Owing to recycling, the aluminium industry's global energetic and environmental prints are much lower than its ore extractive metallurgy's ones. Likewise, recycling will allow the complete use of the expected avalanche of old scraps, consequently to the dramatic explosion of aluminium consumption since the 50's. The recycling state is characterized by: i) raw materials split in two groups :one, the new scrap, internal and prompt, proportional to semi-finished and finished products quantities, exhibits a fairly good and regular quality. The other, the old scrap, proportional to the finished products arrivïng at their end-of--life, about 22 years later on an average, exhibits a variable quality depending on the collect mode. ii) a poor recycling rate, near by that of steel. The aluminium industry generates too much new internal scrap and doesn't collect all the availa~e old scrap. About 50% of it is not recycled (when steel is recycling about 70% of the old scrap flow). iii) recycling techniques, all based on melting, are well handled in spite of aluminium atiiníty to oxygen and the practical impossibility to purify aluminium from any impurity. Sorting and first collect are critical issues before melting. iv) products and markets of recycled aluminium :New scraps have still been recycled in the production lines from where there are coming (closed loop). Old scraps, mainly those mixed, have been first recycled in different production lines (open loop) :steel deoxidation products followed during the 30's, with the development of the foundry alloys, by foundry pieces of which the main market is the automotive industry. During the 80's, the commercial development of the beverage can in North America has permitted the first old scrap recycling closed loop which is developing. v) an economy with low and erratic margins because the electrolytic aluminium quotation fixes scrap purchasing price and recycled aluminium selling price. vi) an industrial organisation historically based on the scrap group and the loop mode. New scrap is recycled either by the transformation industry itself or by the recycling industry, the remelter, old scrap by the refiner, the other component of the recycling industry. The big companies, the "majors" are often involved in the closed loop recycling and very seldom in the open loop one. To-day, aluminium industry's global energetic and environmental prints are too unbeara~ e and the sustainaЫe development criteria are not fully met. Critical issues for the aluminium industry are to better produce, to better consume and to better recycle in order to become a real sustainaЫe development industry. Specific issues to recycling are a very efficient recycling industry, a "sustainaЫe development" economy, a complete old scrap collect favouring the closed loop. Also, indirectly connected to the recycling, are a very efficient transformation industry generating much less new scrap and a finished products industry delivering only products fulfilling sustainaЫe development criteria.

Distortion control for delay-sensitive sources

We investigate the problem of finding minimum-distortion policies for streaming delay-sensitive but distortion-tolerant data. We consider cross-layer approaches which exploit the coupling between presentation and transport layers. We make the natural assumption that the distortion function is convex and decreasing. We focus on a single source-destination pair and analytically find the optimum transmission policy when the transmission is done over an error-free channel. This optimum policy turns out to be independent of the exact form of the convex and decreasing distortion function. Then, for a packet-erasure channel, we analytically find the optimum open-loop transmission policy, which is also independent of the form of the convex distortion function. We then find computationally efficient closed-loop heuristic policies and show, through numerical evaluation, that they outperform the open-loop policy and have near optimal performance.

AMADEUS: advanced manipulation for deep underwater sampling

AMADEUS is a dexterous subsea robot hand incorporating force and slip contact sensing, using fluid filled tentacles for fingers. Hydraulic pressure variations in each of three flexible tubes (bellows) in each finger create a bending moment, and consequent motion or increase in contact force during grasping. Such fingers have inherent passive compliance, no moving parts, and are naturally depth pressure-compensated, making them ideal for reliable use in the deep ocean. In addition to the mechanical design, development of the hand has also considered closed loop finger position and force control, coordinated finger motion for grasping, force and slip sensor development/signal processing, and reactive world modeling/planning for supervisory `blind grasping¿. Initially, the application focus is for marine science tasks, but broader roles in offshore oil and gas, salvage, and military use are foreseen. Phase I of the project is complete, with the construction of a first prototype. Phase I1 is now underway, to deploy the hand from an underwater robot arm, and carry out wet trials with users.

AMADEUS: advanced manipulation for deep underwater sampling

AMADEUS is a dexterous subsea robot hand incorporating force and slip contact sensing, using fluid filled tentacles for fingers. Hydraulic pressure variations in each of three flexible tubes (bellows) in each finger create a bending moment, and consequent motion or increase in contact force during grasping. Such fingers have inherent passive compliance, no moving parts, and are naturally depth pressure-compensated, making them ideal for reliable use in the deep ocean. In addition to the mechanical design, development of the hand has also considered closed loop finger position and force control, coordinated finger motion for grasping, force and slip sensor development/signal processing, and reactive world modeling/planning for supervisory `blind grasping¿. Initially, the application focus is for marine science tasks, but broader roles in offshore oil and gas, salvage, and military use are foreseen. Phase I of the project is complete, with the construction of a first prototype. Phase I1 is now underway, to deploy the hand from an underwater robot arm, and carry out wet trials with users.