The COLOSS BEEBOOK Volume I: Standard Methods for Apis mellifera Research

In recent years, declines of honey bee populations have received massive media attention worldwide, yet attempts to understand the causes have been hampered by a lack of standardisation of laboratory techniques. Published as a response to this, the COLOSS BEEBOOK is a unique collaborative venture involving 234 bee scientists from 34 countries, who have produced the definitive guide to how to carry out research on honey bees. It is hoped that these volumes will become the standards to be adopted by bee scientists worldwide. Volume I includes approximately 1,100 separate protocols dealing with the study of the honey bee, Apis mellifera. These cover anatomy, behavioural studies, chemical ecology, breeding, genetics, instrumental insemination and queen rearing, pollination, molecular studies, statistics, toxicology and numerous other techniques

The application of inverse-dispersion and gradient methods to estimate ammonia emissions from a penguin colony.

Penguin colonies represent some of the most concentrated sources of ammonia emissions to the atmosphere in the world. The ammonia emitted into the atmosphere can have a large influence on the nitrogen cycling of ecosystems near the colonies. However, despite the ecological importance of the emissions, no measurements of ammonia emissions from penguin colonies have been made. The objective of this work was to determine the ammonia emission rate of a penguin colony using inverse-dispersion modelling and gradient methods. We measured meteorological variables and mean atmospheric concentrations of ammonia at seven locations near a colony of Adélie penguins in Antarctica to provide input data for inverse-dispersion modelling. Three different atmospheric dispersion models (ADMS, LADD and a Lagrangian stochastic model) were used to provide a robust emission estimate. The Lagrangian stochastic model was applied both in ‘forwards’ and ‘backwards’ mode to compare the difference between the two approaches. In addition, the aerodynamic gradient method was applied using vertical profiles of mean ammonia concentrations measured near the centre of the colony. The emission estimates derived from the simulations of the three dispersion models and the aerodynamic gradient method agreed quite well, giving a mean emission of 1.1 g ammonia per breeding pair per day (95% confidence interval: 0.4–2.5 g ammonia per breeding pair per day). This emission rate represents a volatilisation of 1.9% of the estimated nitrogen excretion of the penguins, which agrees well with that estimated from a temperature-dependent bioenergetics model. We found that, in this study, the Lagrangian stochastic model seemed to give more reliable emission estimates in ‘forwards’ mode than in ‘backwards’ mode due to the assumptions made.

Genome projects and gene pools: New germplasm for plant breeding?

Crop gene pools have adapted to and sustained the demands of agricultural systems for thousands of years. Yet, very little is known about their content, distribution, architecture, or circuitry. The presumably shallow elite gene pools often continue to yield genetic gains while the exotic pools remain mostly untapped, uncharacterized, and underutilized. The concept and content of a crop’s gene pools are being changed by advancements in plant science and technology. In the first generation of plant genomics, DNA markers have refined some perceptions of genetic variation by providing a glimpse of a primary source, DNA polymorphism. The markers have provided new and more powerful ways of assessing genetic relationships, diversity, and merit by infusing genetic information for the first time in many scenarios or in a more comprehensive manner for others. As a result, crop gene pools may be supplemented through more rapid and directed methods from a greater variety of sources. Previously limited by the barriers of sexual reproduction, the native gene pools will soon be complemented by another gene pool (transgenes) and perhaps by other native exotic gene pools through comparative analyses of plants’ biological repertoire. Plant genomics will be an important force of change for crop improvement. The plant science community and crop gene pools may be united and enriched as never before. Also, the genomes and gene pools, the products of evolution and crop domestication, will be reduced and subjected to the vagaries and potential divisiveness of intellectual property considerations. Let the gains begin.

Ethnobotanic importance of plants used in pigeon-breeding in Eastern Spain

Background: The importance that birds of the Columbidae family have had throughout history is visible on the Mediterranean coast. Pigeon fancying is the art of breeding and training carrier pigeons and currently, several breeds exist. The sport of racing pigeons consists in covering a distance at maximum possible speed. However, pigeon breeding has another modality called “sport pigeon”, where several males follow a female. This study focusses on ethnobotanical knowledge of native and exotic plant species that are used for diet, breeding, stimulation, healing illnesses and staining the plumage of pigeons bred in captivity. Methods: Using semi-structured interviews, we gathered information about the different plant species traditionally used for pigeon-breeding in the region of Valencia. Background material on remedies for bird illnesses was gathered from folk botanical references, local books and journals. The plant species were collected in the study area, then identified in the laboratory using dichotomous keys and vouchered in the ABH (Herbarium of Alicante University). We used Excel ® 2003 to perform a simple statistical analysis of the data collected. Results: We collected 56 species of plants (and one variety) that included 29 botanical families. The total number of species was made up of 35 cultivated and 21 wild plants. The most common were Gramineae (14 species), Leguminosae (6 species), and Compositae (4 species). Conclusions: Pigeon breeding is an immensely popular activity in Eastern Spain, and ethnobiological knowledge about breeding pigeons and caring for them is considerable. The names and traditional uses of plants depend on their geographical location, vernacular names serve as an intangible heritage. Feeding, environmental features, and genetic makeup of individuals are relevant aspects in the maintenance of avian health.

Domesticated animals and plants; a brief treatise upon the origin and development of domesticated races, with special reference to the methods of improvement,

Mode of access: Internet.

Luther Burbank, his methods and discoveries and their practical application; prepared from his original field notes covering more than 100,000 experiments made during forty years devoted to plant improvement,

Frontispiece, illustrations, etc., are mounted.

Development of release methods for critically endangered freshwater pearl mussels (Margaritifera margaritifera)

Biodiversity loss is a global problem with freshwater bivalves considered amongst the most
endangered biota. The freshwater pearl mussel, Margaritifera margaritifera, is declining
throughout its range owing to habitat degradation and overexploitation. In most of its range,
populations are regarded as reproductively non-functional which has led to the development
of captive breeding programmes. A novel method of releasing M. margaritifera was trialled,
with captive-bred juveniles being released into the rivers caged in ‘mussels silos’ (protective
concrete domes with ventilation creating upwelling to ensure water through flow). We
released 240 juvenile mussels and survival and growth rates were monitored for 18 months
post-release for three size classes: A (13.01-20.00mm); B (10.01-13.00mm); and C (4.01-
10.00mm). We explicitly tested two experimental treatments; one where sediment was added
to each silo (allowing mussels to orientate and burrow) and one without sediment. Survival
by the end of the experiment at month 18 was significantly higher for the largest size class at
97% (though growth was lowest in this cohort), and lowest for the smallest size class at 61%
(though growth was highest in this cohort). Survival and growth were unaffected by the
experimental treatment suggesting that adding sediment offered no advantage. Growth was
positively correlated with both water temperature and the particle size of suspended solids
(both of which were collinear, peaking in summer). There are a large number of ex situ
breeding programmes for freshwater pearl mussels throughout Europe and our finding
suggest that the use of ‘mussel silos’ could be a useful tool to protecting juvenile mussels
allowing them to be released at a relatively early stage of development, minimising the risk of
domestication.

A Triple-Isotope Approach to Predict the Breeding Origins of European Bats

Despite a commitment by the European Union to protect its migratory bat populations, conservation efforts are hindered by a poor understanding of bat migratory strategies and connectivity between breeding and wintering grounds. Traditional methods like mark-recapture are ineffective to study broad-scale bat migratory patterns. Stable hydrogen isotopes (delta D) have been proven useful in establishing spatial migratory connectivity of animal populations. Before applying this tool, the method was calibrated using bat samples of known origin. Here we established the potential of delta D as a robust geographical tracer of breeding origins of European bats by measuring delta D in hair of five sedentary bat species from 45 locations throughout Europe. The delta D of bat hair strongly correlated with well-established spatial isotopic patterns in mean annual precipitation in Europe, and therefore was highly correlated with latitude. We calculated a linear mixed-effects model, with species as random effect, linking delta D of bat hair to precipitation delta D of the areas of hair growth. This model can be used to predict breeding origins of European migrating bats. We used delta C-13 and delta N-15 to discriminate among potential origins of bats, and found that these isotopes can be used as variables to further refine origin predictions. A triple-isotope approach could thereby pinpoint populations or subpopulations that have distinct origins. Our results further corroborated stable isotope analysis as a powerful method to delineate animal migrations in Europe.

Bacterial and pathological study of caudal fin rot in brood stocks of Salmo trutta caspius from the propagation and breeding center of Shahid Bahonar of Kelardasht region

In order to study caudal fin rot with emphasis on Aeromonas hydrophila and Pseudomonas fluorescens in Salmo trutta caspius from the salmonids propagation and breeding center of Shahid Bahonar of kelardasht region, One hundred and eighty brood stocks having fin damage symptoms were chosen. Two bacterial samples from each fish were cultured on Aeromonas and Pseudomonas specific media. Biochemical tests, API2OE identification system and antibiogram test using six antibiotic disks were performed for diagnosing isolates bacteria and finding suitable antibiotic. Thirty samples from caudal fin of damaged fishes were fixed in 10% formalin and 51.tm microscopic sections were prepared using standard scatological methods and then stained by Haematoxylin-Eosin staining method to observe the pathological changes and also Maccallum-Goodpasture staining method to observe the bacterial colonies. In second stage of the study, bacterial samples were taken from thirty brood stocks using similar method at the first stage of sampling. For isolation and biochemical diagnosis of Aeromonas and Pseudormonas genus, the samples were analyzed by molecular research included PCR amplification (using 16S rDNA genes of the genus pseudomonas and 16S-23S rDNA intergenic spacer of the genus Aeromonas) and restriction analysis by four restriction enzymes for each genus. The results of biochemical tests showed that isolated bacteria were belonged to Aeromonas caviae and Aeromonas hydrophila (subspecies anaerogenes), Pseudomonas fluorescens, Pseudomonas putida and Pseudomonas alcaligenes while the results of API2OE identification system showed that the isolated bacteria belonged to Aeromonas hydrophila, Pseudomonas fluorescens, Pseudomonas putida and Pseudomonas aeruginosa. Restriction analysis of Aeromonas samples with Hin6l, Csp6I, Taql, and Tasl revealed three samples were different from others while restriction analysis of Pseudomonas samples with Alul, Hinfl, Rsal, and Trull showed at least five species or biovars. The results of antibiogram test showed all Aeromonas samples were sensitive to Trimethoprim, Chloramphenicol and Nitrofurazone, mostly to Nalidixic acid and Chloramphenicol, while most of samples were resistant to Erythromycin and Oxytetracycline. Pseudomonas samples were only sensitive to Nitrofurazone and mostly resistant to Oxytetracycline, Nalidixic acid, Erythromycin, Trimethoprim and Chloramphenicol. The results of light microscope study showed hyperplasia and spongiosis of the malpigian cells of epidermis, increasing of melanin pigments underlying epidermis; sever necrosis in both epidermis and dermis and also sloughing the epidermis in some cases. Occurrence of clefts through the epithelium, neovascularization, hyperemia and mild inflammatory response in dermis and separation of the fin rays also were observed. No bacterial colonies were found in the sections.

Sorghum Crop Modeling and Its Utility in Agronomy and Breeding

Crop models are simplified mathematical representations of the interacting biological and environmental components of the dynamic soil–plant–environment system. Sorghum crop modeling has evolved in parallel with crop modeling capability in general, since its origins in the 1960s and 1970s. Here we briefly review the trajectory in sorghum crop modeling leading to the development of advanced models. We then (i) overview the structure and function of the sorghum model in the Agricultural Production System sIMulator (APSIM) to exemplify advanced modeling concepts that suit both agronomic and breeding applications, (ii) review an example of use of sorghum modeling in supporting agronomic management decisions, (iii) review an example of the use of sorghum modeling in plant breeding, and (iv) consider implications for future roles of sorghum crop modeling. Modeling and simulation provide an avenue to explore consequences of crop management decision options in situations confronted with risks associated with seasonal climate uncertainties. Here we consider the possibility of manipulating planting configuration and density in sorghum as a means to manipulate the productivity–risk trade-off. A simulation analysis of decision options is presented and avenues for its use with decision-makers discussed. Modeling and simulation also provide opportunities to improve breeding efficiency by either dissecting complex traits to more amenable targets for genetics and breeding, or by trait evaluation via phenotypic prediction in target production regions to help prioritize effort and assess breeding strategies. Here we consider studies on the stay-green trait in sorghum, which confers yield advantage in water-limited situations, to exemplify both aspects. The possible future roles of sorghum modeling in agronomy and breeding are discussed as are opportunities related to their synergistic interaction. The potential to add significant value to the revolution in plant breeding associated with genomic technologies is identified as the new modeling frontier.

Evaluation of breeding strategies for polledness in dairy cattle using a newly developed simulation framework for quantitative and Mendelian traits

Background: Intensified selection of polled individuals has recently gained importance in predominantly horned dairy cattle breeds as an alternative to routine dehorning. The status quo of the current polled breeding pool of genetically-closely related artificial insemination sires with lower breeding values for performance traits raises questions regarding the effects of intensified selection based on this founder pool. Methods: We developed a stochastic simulation framework that combines the stochastic simulation software QMSim and a self-designed R program named QUALsim that acts as an external extension. Two traits were simulated in a dairy cattle population for 25 generations: one quantitative (QMSim) and one qualitative trait with Mendelian inheritance (i.e. polledness, QUALsim). The assignment scheme for qualitative trait genotypes initiated realistic initial breeding situations regarding allele frequencies, true breeding values for the quantitative trait and genetic relatedness. Intensified selection for polled cattle was achieved using an approach that weights estimated breeding values in the animal best linear unbiased prediction model for the quantitative trait depending on genotypes or phenotypes for the polled trait with a user-defined weighting factor. Results: Selection response for the polled trait was highest in the selection scheme based on genotypes. Selection based on phenotypes led to significantly lower allele frequencies for polled. The male selection path played a significantly greater role for a fast dissemination of polled alleles compared to female selection strategies. Fixation of the polled allele implies selection based on polled genotypes among males. In comparison to a base breeding scenario that does not take polledness into account, intensive selection for polled substantially reduced genetic gain for this quantitative trait after 25 generations. Reducing selection intensity for polled males while maintaining strong selection intensity among females, simultaneously decreased losses in genetic gain and achieved a final allele frequency of 0.93 for polled. Conclusions: A fast transition to a completely polled population through intensified selection for polled was in contradiction to the preservation of high genetic gain for the quantitative trait. Selection on male polled genotypes with moderate weighting, and selection on female polled phenotypes with high weighting, could be a suitable compromise regarding all important breeding aspects.

ABOVE-GROUND BIOMASS ESTIMATION OF OPUNTIA FICUS-INDICA (L.) MILL. FOR FORAGE CROP IN A MEDITERRANEAN ENVIRONMENT BY USING NON-DESTRUCTIVE METHODS

In marginal lands Opuntia ficus-indica (OFI) could be used as an alternative fruit and forage crop. The plant vigour and the biomass production were evaluated in Portuguese germplasm (15 individuals from 16 ecotypes) by non-destructive methods, 2 years following planting in a marginal soil and dryland conditions. Two Italian cultivars (Gialla and Bianca) were included in the study for comparison purposes. The biomass production and the plant vigour were estimated by measuring the cladodes number and area, and the fresh (FW) and dry weight (DW) per plant. We selected linear models by using the biometric data from 60 cladodes to predict the cladode area, the FW and the DW per plant. Among ecotypes, significant differences were found in the studied biomass-related parameters and several homogeneous groups were established. Four Portuguese ecotypes had higher biomass production than the others, 3.20 Mg ha−1 on average, a value not significantly different to the improved ‘Gialla’ cultivar, which averaged 3.87 Mg ha−1. Those ecotypes could be used to start a breeding program and to deploy material for animal feeding and fruit production.

Red flesh fruit in european pear (Pyrus communis): genetic sources, QTLs, candidate genes and tools for breeding

Red flesh fruit is a character which interest is increasing in several commercial species. Following a review of the research on the biosynthesis and accumulation of anthocyanin in pears (Chapter 1) the general aim of the project is reported in Chapter 2. Chapter 3 reports the results of a molecular analysis of 33 red-fleshed pear accessions, genotyped with 18 SSR markers with the aim of improving germplasm conservation strategies to support ongoing breeding programs. The molecular profiles revealed both cases of synonymy and homonymy and 6 unique genotypes were identified. The S-allele were established to highlight the genetic relationships among these landraces. Four of the unique genotypes have been clustered based on pomological data. In the Chapter 4, the work was directed to identify the putative genomic regions involved in the appearance of this character in pear fruit. A crossing population (‘Carmen’ x ‘Cocomerina Precoce’) segregating for the trait was phenotyped for 2 consecutive years and used for QTL analysis. A strong QTL was identified in a small genomic region related to the red flesh fruit trait at 27 Mb from the start of LG5. Two candidate genes were detected in this genomic region: ‘PcMYB114’ and ‘PcABCC2’. SSR marker SSR114 was found able to detect the red flesh phenotype segregation in all the red-fleshed pear accessions and segregating progenies tested. Chapter 5 focuses on examining the trend of anthocyanin synthesis and accumulation during the fruit development, from fruit set to ripening time. Three different trials were planned: qPCR and HPLC methods were performed to correlate the genes expression with the anthocyanin accumulation in ‘Cocomerina Precoce’ and six progenies. Total transcriptome sequencing was used to compare the differential genes expression between red and white-fleshed fruit. Chapter 6 reviews and analyses all the earlier study findings while providing new potential future perspectives.

Evaluation Of Different Treatment Methods Against Denture Stomatitis: A Randomized Clinical Study.

The aim of this clinical study was to determine the efficacy of Uncaria tomentosa (cat's claw) against denture stomatitis (DS). Fifty patients with DS were randomly assigned into 3 groups to receive 2% miconazole, placebo, or 2% U tomentosa gel. DS level was recorded immediately, after 1 week of treatment, and 1 week after treatment. The clinical effectiveness of each treatment was measured using Newton's criteria. Mycologic samples from palatal mucosa and prosthesis were obtained to determinate colony forming units per milliliter (CFU/mL) and fungal identification at each evaluation period. Candida species were identified with HiCrome Candida and API 20C AUX biochemical test. DS severity decreased in all groups (P < .05). A significant reduction in number of CFU/mL after 1 week (P < .05) was observed for all groups and remained after 14 days (P > .05). C albicans was the most prevalent microorganism before treatment, followed by C tropicalis, C glabrata, and C krusei, regardless of the group and time evaluated. U tomentosa gel had the same effect as 2% miconazole gel. U tomentosa gel is an effective topical adjuvant treatment for denture stomatitis.

Petroleomics By Electrospray Ionization Ft-icr Mass Spectrometry Coupled To Partial Least Squares With Variable Selection Methods: Prediction Of The Total Acid Number Of Crude Oils.

Negative-ion mode electrospray ionization, ESI(-), with Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) was coupled to a Partial Least Squares (PLS) regression and variable selection methods to estimate the total acid number (TAN) of Brazilian crude oil samples. Generally, ESI(-)-FT-ICR mass spectra present a power of resolution of ca. 500,000 and a mass accuracy less than 1 ppm, producing a data matrix containing over 5700 variables per sample. These variables correspond to heteroatom-containing species detected as deprotonated molecules, [M - H](-) ions, which are identified primarily as naphthenic acids, phenols and carbazole analog species. The TAN values for all samples ranged from 0.06 to 3.61 mg of KOH g(-1). To facilitate the spectral interpretation, three methods of variable selection were studied: variable importance in the projection (VIP), interval partial least squares (iPLS) and elimination of uninformative variables (UVE). The UVE method seems to be more appropriate for selecting important variables, reducing the dimension of the variables to 183 and producing a root mean square error of prediction of 0.32 mg of KOH g(-1). By reducing the size of the data, it was possible to relate the selected variables with their corresponding molecular formulas, thus identifying the main chemical species responsible for the TAN values.