The Gracilariaceae Germplasm Bank of the University of So Paulo, Brazil-a DNA barcoding approach

The University of So Paulo Gracilariaceae Germplasm Bank has 50 strains collected mostly in Brazil, but also elsewhere in the world. This bank has been used as a source of material for research developed locally and abroad. With over 200 species, some of which have high economic value, the family Gracilariaceae has been extensively studied. Nonetheless, taxonomic problems still persist by the existence of cryptic species, phenotypic plasticity, and broad geographic distribution. In the case of algae kept in culture for long periods of time, the identification is even more problematic as a consequence of considerable morphological modification. Thus, the use of molecular markers has been shown to be an efficient tool to elucidate taxonomic issues in the group. In this work, we sequenced the 5'-end of the cox1 gene for 41 strains and the universal plastid amplicon (UPA) plastid region for 45 strains, covering all 50 strains in the bank. In addition, the rbcL for representatives of the cox1/UPA clusters was sequenced for 14 strains. The original species identification based on morphology was compared with the molecular data obtained in this work, resulting in the identification of 13 different species. Our analyses indicate that cox1 and UPA are suitable markers for the delineation of species of Gracilariales in the germplasm bank. The addition of DNA barcode tags to the samples in the Gracilariaceae germplasm bank and the molecular identification of the species will make this bank even more useful for future research as the species can be easily traced and confirmed.

Will a DNA barcoding approach be useful to identify Porphyra species (Bangiales, Rhodophyta)?

This paper is part of an extensive study on the biodiversity of the macroalgal flora of So Paulo state, SE Brazil. Previous assessments were based only on morphological descriptions. Here, we tested the effectiveness of DNA barcoding, in comparison with morphological observations for the recognition and cataloging of species. The focus of this study is the genus Porphyra, which is a conspicuous component of the upper intertidal on rocky shores of this region. With five currently accepted species, we have sequenced three short markers: cox1, cox2-3 spacer and UPA to establish the first DNA barcode database for the Porphyra species from the Brazilian coast. The three markers, although with different evolution rates, recovered a cryptic species (Porphyra sp. 77), grouped two different species (Porphyra drewiana and Porphyra spiralis) that are being synonymized, and finally indicated that varieties within P. acanthophora and P. spiralis are merely morphological, with no sequence divergence in the studied molecular markers.

A revision of species diversity in the Neotropical genus Oreobates (Anura: Strabomantidae), with the description of three new species from the Amazonian slopes of the Andes

We revisit species diversity within Oreobates (Anura: Strabomantidae) by combining molecular phylogenetic analyses of the 16S rRNA amphibian barcode fragment with the study of the external morphology of living and preserved specimens. Molecular and morphological evidence support the existence of 23 species within Oreobates, and three additional candidate species (Oreobates sp. [Ca JF809995], Oreobates sp. [Ca EU368903], Oreobates cruralis [Ca EU192295]). We describe and name three new species from the Andean humid montane forests of Departamento Cusco, southern Peru: O. amarakaeri New Species from Rio Nusinuscato and Rio Mabe, at elevations ranging from 670 to 1000 m in the Andean foothills; O. machiguenga, new species, from Rio Kimbiri (1350 m), a small tributary of the Apurimac River, in the western versant of Cordillera Vilcabamba; and O. gemcare, new species, from the Kosnipata Valley at elevations ranging from 2400 to 2800 m. The three new species are readily distinguished from all other Oreobates by at least one qualitative morphological character. Three species are transferred to Oreobates from three genera of Strabomantidae: Hypodactylus lundbergi, Pristimantis crepitans, and Phrynopus ayacucho (for which the advertisement call, coloration in life, and male characteristics are described for first time). Oreobates simmonsi is transferred to the genus Lynchius. Hylodes verrucosus is considered a junior synonym of Hylodes philippi. In addition, H. philippi is removed from the synonymy of O. quixensis and considered a nomem dubium within Hypodactylus. The inclusion of Phrynopus ayacucho in Oreobates extends the ecological range of the genus to the cold Andean puna. Oreobates is thus distributed from the Amazonian lowlands in southern Colombia to northern Argentina, reaching the Brazilian Atlantic dry forests in eastern Brazil, across an altitudinal range from ca. 100 to 3850 m.

Morphological and genetic variability in Hippolyte obliquimanus dana, 1852 (Decapoda, Caridea, Hippolytidae) from Brazil and the caribbean sea

Hippolyte obliquimanus is a marine shrimp reported from the Caribbean Sea and Brazil. The literature provides indications for morphological variation between populations from those regions and the species has a troubled taxonomic history. The aims of this study were to analyse morphological and genetic variation in the populations of H. obliquimanus from Brazil and the Caribbean Sea and to verify if those might support separation of H. obliquimanus into two or more species. This hypothesis was tested with the analysis of morphological and genetic data (mitochondrial gene 16S and the barcode region Cytochrome Oxidase I). The material analysed was obtained from samples and from loans of zoological collections. The rostrum as well as pereiopods 3, 4, and 5 were the adult morphological characters that showed variation, but this occurred in samples from both regions, Brazil and the Caribbean Sea. The sequences of the 16S gene were identical among all specimens analysed. There was, however, variation among the sequences of the barcoding gene COI (<2.0%); this divergence separated the specimens into two groups (Brazil versus the Caribbean) and these groups did not share haplotypes. In conclusion, specimens from the regions analysed showed both morphological and genetic variation, but these did not support the separation of H. obliquimanus into two or more species.

Biogeographic and diversification patterns of Neotropical Troidini butterflies (Papilionidae) support a museum model of diversity dynamics for Amazonia

Background: The temporal and geographical diversification of Neotropical insects remains poorly understood because of the complex changes in geological and climatic conditions that occurred during the Cenozoic. To better understand extant patterns in Neotropical biodiversity, we investigated the evolutionary history of three Neotropical swallowtail Troidini genera (Papilionidae). First, DNA-based species delimitation analyses were conducted to assess species boundaries within Neotropical Troidini using an enlarged fragment of the standard barcode gene. Molecularly delineated species were then used to infer a time-calibrated species-level phylogeny based on a three-gene dataset and Bayesian dating analyses. The corresponding chronogram was used to explore their temporal and geographical diversification through distinct likelihood-based methods. Results: The phylogeny for Neotropical Troidini was well resolved and strongly supported. Molecular dating and biogeographic analyses indicate that the extant lineages of Neotropical Troidini have a late Eocene (33-42 Ma) origin in North America. Two independent lineages (Battus and Euryades + Parides) reached South America via the GAARlandia temporary connection, and later became extinct in North America. They only began substantive diversification during the early Miocene in Amazonia. Macroevolutionary analysis supports the "museum model" of diversification, rather than Pleistocene refugia, as the best explanation for the diversification of these lineages. Conclusions: This study demonstrates that: (i) current Neotropical biodiversity may have originated ex situ; (ii) the GAARlandia bridge was important in facilitating invasions of South America; (iii) colonization of Amazonia initiated the crown diversification of these swallowtails; and (iv) Amazonia is not only a species-rich region but also acted as a sanctuary for the dynamics of this diversity. In particular, Amazonia probably allowed the persistence of old lineages and contributed to the steady accumulation of diversity over time with constant net diversification rates, a result that contrasts with previous studies on other South American butterflies.

A multi-locus approach to barcoding in the Anopheles strodei subgroup (Diptera: Culicidae)

Abstract Background The ability to successfully identify and incriminate pathogen vectors is fundamental to effective pathogen control and management. This task is confounded by the existence of cryptic species complexes. Molecular markers can offer a highly effective means of species identification in such complexes and are routinely employed in the study of medical entomology. Here we evaluate a multi-locus system for the identification of potential malaria vectors in the Anopheles strodei subgroup. Methods Larvae, pupae and adult mosquitoes (n = 61) from the An. strodei subgroup were collected from 21 localities in nine Brazilian states and sequenced for the COI, ITS2 and white gene. A Bayesian phylogenetic approach was used to describe the relationships in the Strodei Subgroup and the utility of COI and ITS2 barcodes was assessed using the neighbor joining tree and “best close match” approaches. Results Bayesian phylogenetic analysis of the COI, ITS2 and white gene found support for seven clades in the An. strodei subgroup. The COI and ITS2 barcodes were individually unsuccessful at resolving and identifying some species in the Subgroup. The COI barcode failed to resolve An. albertoi and An. strodei but successfully identified approximately 92% of all species queries, while the ITS2 barcode failed to resolve An. arthuri and successfully identified approximately 60% of all species queries. A multi-locus COI-ITS2 barcode, however, resolved all species in a neighbor joining tree and successfully identified all species queries using the “best close match” approach. Conclusions Our study corroborates the existence of An. albertoi, An. CP Form and An. strodei in the An. strodei subgroup and identifies four species under An. arthuri informally named A-D herein. The use of a multi-locus barcode is proposed for species identification, which has potentially important utility for vector incrimination. Individuals previously found naturally infected with Plasmodium vivax in the southern Amazon basin and reported as An. strodei are likely to have been from An. arthuri C identified in this study.

Systematics of the Oswaldoi Complex (Anopheles, Nyssorhynchus) in South America

Abstract Background Effective malaria control relies on accurate identification of those Anopheles mosquitoes responsible for the transmission of Plasmodium parasites. Anopheles oswaldoi s.l. has been incriminated as a malaria vector in Colombia and some localities in Brazil, but not ubiquitously throughout its Neotropical range. This evidence together with variable morphological characters and genetic differences supports that An. oswaldoi s.l. compromises a species complex. The recent fully integrated redescription of An. oswaldoi s.s. provides a solid taxonomic foundation from which to molecularly determine other members of the complex. Methods DNA sequences of the Second Internal Transcribed Spacer (ITS2 - rDNA) (n = 192) and the barcoding region of the Cytochrome Oxidase I gene (COI - mtDNA) (n = 110) were generated from 255 specimens of An. oswaldoi s.l. from 33 localities: Brazil (8 localities, including the lectotype series of An. oswaldoi), Ecuador (4), Colombia (17), Trinidad and Tobago (1), and Peru (3). COI sequences were analyzed employing the Kimura-two-parameter model (K2P), Bayesian analysis (MrBayes), Mixed Yule-Coalescent model (MYC, for delimitation of clusters) and TCS genealogies. Results Separate and combined analysis of the COI and ITS2 data sets unequivocally supported four separate species: two previously determined (An. oswaldoi s.s. and An. oswaldoi B) and two newly designated species in the Oswaldoi Complex (An. oswaldoi A and An. sp. nr. konderi). The COI intra- and inter-specific genetic distances for the four taxa were non-overlapping, averaging 0.012 (0.007 to 0.020) and 0.052 (0.038 to 0.064), respectively. The concurring four clusters delineated by MrBayes and MYC, and four independent TCS networks, strongly confirmed their separate species status. In addition, An. konderi of Sallum should be regarded as unique with respect to the above. Despite initially being included as an outgroup taxon, this species falls well within the examined taxa, suggesting a combined analysis of these taxa would be most appropriate. Conclusions: Through novel data and retrospective comparison of available COI and ITS2 DNA sequences, evidence is shown to support the separate species status of An. oswaldoi s.s., An. oswaldoi A and An. oswaldoi B, and at least two species in the closely related An. konderi complex (An. sp. nr. konderi, An. konderi of Sallum). Although An. oswaldoi s.s. has never been implicated in malaria transmission, An. oswaldoi B is a confirmed vector and the new species An. oswaldoi A and An. sp. nr. konderi are circumstantially implicated, most likely acting as secondary vectors.

DNA barcoding taxonomy and diversity of the Mediterranean sharks and rays

Elasmobranchs are an important by-catch of commercial fisheries targeting bony fishes. Fisheries targeting sharks are rare, but usually almost all specimen bycatched are marketed. They risk extinction if current fishing pressure continues (Ferretti et al., 2008). Accurate species identification is critical for the design of sustainable fisheries and appropriate management plans, especially since not all species are equally sensitive to fishing pressure (Walker & Hislop 1998). The identification of species constitutes the first basic step for biodiversity monitoring and conservation (Dayrat B et al., 2005). More recently, mtDNA sequencing has also been used for species identification and its use has become widespread under the DNA Barcode initiative (e.g. Hebert et al. 2003a, 2003b; Ward et al. 2005, 2008a; Moura et al 2008; Steinke et al. 2009). The aims of this work were: 1) identify sharks and skates species using DNA barcode; 2) compare species of different provenance; 3) use DNA barcode for misidentified species. Using DNA barcode 15 species of sharks (Alopias vulpinus, Centrophorus granulosus, Cetorhinus maximus, Dalatias licha, Etmopterus spinax, Galeorhinus galeus, Galeus melastomus, Heptranchias perlo, Hexanchus griseus, Mustelus mustelus, Mustelus punctulatus, Oxynotus centrina, Scyliorhinus canicula Squalus acanthias, Squalus blainville), 1 species of chimaera (Chimaera monstrosa) and 21 species of rays/skayes (Dasyatis centroura, Dasyatis pastinaca, Dasyatis sp., Dipturus nidarosiensis, Dipturus oxyrinchus, Leucoraja circularis, Leucoraja melitensis, Myliobatis aquila, Pteromylaeus bovinus, Pteroplatytrygon violacea, Raja asterias, Raja brachyura, Raja clavata, Raja miraletus, Raja montagui, Raja radula, Raja polystigma, Raja undulata, Rostroraja alba, Torpedo marmorata, Torpedo nobiliana, Torpedo torpedo) was identified.

Lifecycle analysis for surgery instruments at a hospital

Gli strumenti chirurgici sono importanti “devices” utilizzati come supporto indi-spensabile nella cura di pazienti negli ospedali. Essi sono caratterizzati da un intero ciclo di vita che inizia convenzionalmente nello “Store”, dove gli strumenti sterilizzati sono prelevati per essere utilizzati all’interno delle sale operatorie, e termina nuovamente nello “Store”, dove gli strumenti vengono immagazzinati per essere riutilizzati in un nuovo ciclo. Può accadere che le singole fasi del ciclo subiscano ritardi rispetto ai tempi previ-sti, non assicurando, pertanto, nelle sale operatorie, il corretto numero degli stru-menti secondo i tempi programmati. Il progetto che vado ad illustrare ha come obiettivo l’ottimizzazione del ciclo degli strumenti chirurgici all’interno di un nuovo ospedale, applicando i principi della Lean philosophy ed in particolare i metodi: “Poke Yoke, 5S e tracciabilità”. Per raggiungere tale scopo, il progetto è stato articolato come segue. In un primo momento si è osservato l’intero ciclo di vita degli strumenti nei due principali ospedali di Copenhagen (Hervel e Gentofte hospital). Ciò ha permesso di rilevare gli steps del ciclo, nonché di riscontrare sul campo i principali problemi relativi al ciclo stesso quali: bassa flessiblità, decentramento dei differenti reparti di cleaning e di store rispetto alle operation theatres ed un problema nel solleva-mento degli strumenti pesanti. Raccolte le dovute informazioni, si è passati alla fase sperimentale, in cui sono stati mappati due cicli di vita differenti, utilizzando tre strumenti di analisi: • Idef0 che consente di avere una visione gerarchica del ciclo; • Value stream Mapping che permette di evidenziare i principali sprechi del ciclo; • Simulator Tecnomatix che favorisce un punto di vista dinamico dell’analisi. Il primo ciclo mappato è stato creato con il solo scopo di mettere in risalto gli steps del ciclo e alcuni problemi rincontrati all’interno degli ospedali visitati. Il secondo ciclo, invece, è stato creato in ottica Lean al fine di risolvere alcuni tra i principali problemi riscontrati nei due ospedali e ottimizzare il primo ciclo. Si ricordi, infatti, che nel secondo ciclo le principali innovazioni introdotte sono state: l’utilizzo del Barcode e Rfid Tag per identificare e tracciare la posizione degli items, l’uso di un “Automatic and Retrievial Store” per minimizzare i tempi di inserimento e prelievo degli items e infine l’utilizzo di tre tipologie di carrello, per consentire un flessibile servizio di cura. Inoltre sono state proposte delle solu-zioni “Poke-Yoke” per risolvere alcuni problemi manuali degli ospedali. Per evidenziare il vantaggio del secondo ciclo di strumenti, è stato preso in consi-derazione il parametro “Lead time”e le due simulazioni, precedentemente create, sono state confrontate. Tale confronto ha evidenziato una radicale riduzione dei tempi (nonché dei costi associati) della nuova soluzione rispetto alla prima. Alla presente segue la trattazione in lingua inglese degli argomenti oggetto di ri-cerca. Buona lettura.

Optical Design for Automatic Identification and Portable Systems

This thesis proposes design methods and test tools, for optical systems, which may be used in an industrial environment, where not only precision and reliability but also ease of use is important. The approach to the problem has been conceived to be as general as possible, although in the present work, the design of a portable device for automatic identification applications has been studied, because this doctorate has been funded by Datalogic Scanning Group s.r.l., a world-class producer of barcode readers. The main functional components of the complete device are: electro-optical imaging, illumination and pattern generator systems. For what concerns the electro-optical imaging system, a characterization tool and an analysis one has been developed to check if the desired performance of the system has been achieved. Moreover, two design tools for optimizing the imaging system have been implemented. The first optimizes just the core of the system, the optical part, improving its performance ignoring all other contributions and generating a good starting point for the optimization of the whole complex system. The second tool optimizes the system taking into account its behavior with a model as near as possible to reality including optics, electronics and detection. For what concerns the illumination and the pattern generator systems, two tools have been implemented. The first allows the design of free-form lenses described by an arbitrary analytical function exited by an incoherent source and is able to provide custom illumination conditions for all kind of applications. The second tool consists of a new method to design Diffractive Optical Elements excited by a coherent source for large pattern angles using the Iterative Fourier Transform Algorithm. Validation of the design tools has been obtained, whenever possible, comparing the performance of the designed systems with those of fabricated prototypes. In other cases simulations have been used.

Sperimentazione con una libreria per la decodifica di bar code in immagini

In questa tesi viene studiata la libreria zbar.h il cui compito è decodificare i barcode presenti in immagini. Per acquisire le immagini si utilizzano funzioni contenute nella libreria OpenCV. Successivamente viene creata un'interfaccia tra OpenCV e ZBar. Vengono effettuati alcuni test per verificare l'efficienza sia di ZBar e sia dell'interfaccia. Concludendo, si crea una nuova libreria in cui sono inglobate le funzioni di ZBar e l'interfaccia OpenCV-ZBar

Populationsgenetik eisenzeitlicher Reiternomaden der Eurasischen Steppe

Vorliegende Dissertation beschäftigt sich mit der Populationsgenetik eisenzeitlicher Bevölkerungen der Eurasischen Steppe, die mit der skythischen Kultur assoziiert werden. Für die Analysen wurden 30 Fragmente der kodierenden Region und die HVR1 (16040–16400) des mitochondrialen Genoms, sowie 20 phänotypische Marker untersucht. Die Marker wurden durch Multiplex-PCRs angereichert, mit einem probenspezifischen barcode versehen und einer parallelen Sequenzanalyse mit dem 454 GS FLX Sequenzierer unterzogen. 97 Individuen wurden erfolgreich analysiert, von denen 19 aus dem Westen der Eurasischen Steppe und 78 aus dem Bereich des Altai-Gebirges stammen. Die populationsgenetischen Analysen ergaben geringe genetische Distanzen zwischen den skythischen Populationen aus dem Bereich des Altai-Gebirges, die sich vom 9. bis zum 3. Jahrhundert vor Christus erstrecken, was für eine kontinuierliche Bevölkerungsentwicklung sprechen könnte. Weiterhin finden sich geringe genetische Distanzen zwischen den Gruppen im Osten und Westen der Eurasischen Steppe, was auf eine gemeinsame Ursprungspopulation, oder zumindest Genfluss hinweisen kann. Die Ergebnisse aus dem Vergleich mit neolithischen und bronzezeitlichen Referenzpopulationen aus Zentralasien und den angrenzenden Gebieten weisen auf die Möglichkeit eines gemeinsamen zentral-asiatischen Ursprungs hin, zeigen aber auch, dass die östlichen und westlichen Gruppen der Eisenzeit jeweils zusätzlich lokalem Genfluss ausgesetzt waren. Die Allelfrequenzen der phänotypischen Marker deuten auf einen größeren europäischen Einfluss auf das östliche Zentralasien in der Eisenzeit hin, oder ansteigenden Genfluss aus Ostasien nach der Eisenzeit.

Phylogeny and phylogeography of the family Hyalidae (Crustacea: Amphipoda) along the northeast Atlantic coasts

The family Hyalidae comprises more than one hundred species, distributed worldwide. They are common and abundant in the littoral and shallow sublittoral habitats and they play an important role in the coastal food chain. Most studies about this family were dealing with taxonomy and ecology, while very little is known about phylogenetic relationship among genera and species. In the present study we aim to achieve the first approach of the phylogenetic patterns of this family in NE Atlantic Ocean and Mediterranean Sea, and to perform the first insight into the phylogeography Apohyale prevostii along both the North Atlantic coasts. In order to do that, eight species belonging to the genera Apohyale, Hyale, Serejohyale and Protohyale were investigated using the mitochondrial COI-5P barcode region. Specimens were collected along European and Moroccan Atlantic rocky shores, including Iceland, the British Isles, Macaronesia and in the Mediterranean Sea. Sequences of A. prevostii, from the NW Atlantic Ocean, available in BOLD and GenBank, were retrieved. As expected, phylogenetic analyses showed highly-divergent clades, clearly discriminating among different species clusters, confirming their morphology-based identifications. Although, within A. perieri, A. media, A. stebbingi, P. (Protohyale) schmidtii and S. spinidactylus, high genetic diversity was found, revealing putative cryptic species. The clade of A. prevostii and A. stebbingi appears well supported and divided from the other two congeneric species, and P. (Protohyale) schmidtii shows a basal divergence. The north-western Atlantic coasts were recently colonized by A. prevostii after the last glacial maximum from the European populations showing also a common haplotype in every population analysed. The use of the COI-5P as DNA barcode provided a good tool to underline the necessity of a revision of this emblematic family, as well as to discern taxonomically the possible new species flagged with this molecular device.

„RFID - Systematische Versuche für den zuverlässigen Einsatz in der Logistik“

Mit zunehmender Komplexität und Vielfalt der Logistikprozesse steigt der Stellenwert der eingesetzten Informationstechnologien. Die den Warenfluss begleitenden bzw. vorhereilenden Informationen sind erforderlich, um Waren identifizieren und Unternehmensressourcen optimal einsetzen zu können. Als Beispiel ist der klassische Wareneingang zu nennen. Durch die Avisierung von Menge und Art eingehender Waren können der Einsatz des Personals zur Entladung und Vereinnahmung sowie die erforderlichen Ressourcen (Ladehilfsmittel, Flurförderzeuge, usw.) im Vorfeld geplant und bereitgestellt werden. Der Informationsfluss ist demnach als Qualitätsmerkmal und als Wirtschaftlichkeitsfaktor zu verstehen. Die Schnittstelle zwischen dem physischen Warenfluss und dem Informationsfluss auf EDV-Basis bildet die Identifikationstechnologien. In der Industrie verbreitete Identifikationstechnologien bestehen in der Regel aus einem Datenträger und einem Erfassungsgerät. Der Datenträger ist am physischen Objekt fixiert. Das Erfassungsgerät liest die auf dem Datenträger befindlichen Objektinformationen und wandelt sie in einen Binär-Code um, der durch nachgelagerte EDV weiterverarbeitet wird. Die momentan in der Industrie und im Handel am häufigsten verwendete Identifikationstechnologie ist der Barcode. In den letzten Jahren tritt die RFID-Technologie in den Fokus der Industrie und des Handels im Bereich Materialfluss und Logistik. Unter „Radio Frequency IDentification“ wird die Kommunikation per Funkwellen zwischen Datenträger (Transponder) und Lesegerät verstanden. Mittels der RFID-Technologie ist der Anwender, im Gegensatz zum Barcode, in der Lage, Informationen auf dem Transponder ohne Sichtkontakt zu erfassen. Eine Ausrichtung der einzelnen Artikel ist nicht erforderlich. Zudem können auf bestimmten Transpondertypen weitaus größere Datenmengen als auf einem Barcode hinterlegt werden. Transponder mit hoher Speicherkapazität eignen sich in der Regel, um die auf ihnen hinterlegten Daten bei Bedarf aktualisieren zu k��nnen. Eine dezentrale Datenorganisation ist realisierbar. Ein weiterer Vorteil der RFID-Technologie ist die Möglichkeit, mehrere Datenträger im Bruchteil einer Sekunde zu erfassen. In diesem Fall spricht man von einer Pulkerfassung. Diese Eigenschaft ist besonders im Bereich Warenein- und -ausgang von Interesse. Durch RFID ist es möglich, Ladeeinheiten, z. B. Paletten mit Waren, durch einen Antennenbereich zu fördern, und die mit Transpondern versehenen Artikel zu identifizieren und in die EDV zu übertragen. Neben der Funktionalität einer solchen Technologie steht in der Industrie vor allem die Wirtschaftlichkeit im Vordergrund. Transponder sind heute teuerer als Barcodes. Zudem müssen Investitionen in die für den Betrieb von RFID erforderliche Hard- und Software einkalkuliert werden. Daher muss der Einsatz der RFID-Technologie Einsparungen durch die Reorganisation der Unternehmensprozesse nach sich ziehen. Ein Schwachpunkt der RFID-Technologie ist momentan je nach Anwendung die mangelnde Zuverlässigkeit und Wiederholgenauigkeit bei Pulklesungen. Die Industrie und der Handel brauchen Identifikationstechnologien, deren Erfassungsrate im Bereich nahe 100 % liegt. Die Gefahr besteht darin, dass durch ein unzuverlässiges RFID-System unvollständige bzw. fehlerhafte Datensätze erzeugt werden können. Die Korrektur der Daten kann teurer sein als die durch die Reorganisation der Prozesse mittels RFID erzielten Einsparungen. Die Erfassungsrate der Transponder bei Pulkerfassungen wird durch mehrere Faktoren beeinflusst, die im Folgenden detailliert dargestellt werden. Das Institut für Fördertechnik und Logistik (IFT) in Stuttgart untersucht m��gliche Einflussgrößen auf die Erkennungsraten bei Pulkerfassungen. Mit den gewonnenen Erkenntnissen sollen mögliche Schwachstellen bei der Erkennung mehrerer Transponder im Vorfeld einer Implementierung in die Logistikprozesse eines Unternehmens eliminiert werden. With increasing complexity and variety of the logistics processes the significance of the used information technologies increases. The information accompanying the material flow is necessary in order to be able to identify goods and to be able to use corporate resources optimally. The classical goods entrance is to be mentioned as an example. The notification of amount and kind of incoming goods can be used for previously planning and providing of the personnel and necessary resources. The flow of information is to be understood accordingly as a high-quality feature and as an economic efficiency factor. With increasing complexity and variety of the logistics processes the significance of the used information technologies increases. The information accompanying the material flow is necessary in order to be able to identify goods and to be able to use corporate resources optimally. The classical goods entrance is to be mentioned as an example. The notification of amount and kind of incoming goods can be used for previously planning and providing of the personnel and necessary resources. The flow of information is to be understood accordingly as a high-quality feature and as an economic efficiency factor.

Einsatz von RFID in der Pharmazeutischen Industrie

Die Radio Frequenz Identifikation (RFID) gilt als wichtigste technologische Neuerung in der Informationslogistik. Wird RFID in der produzierenden Industrie hauptsächlich zur Betriebsdaten-erfassung und im Handel zur Wareneingangs-/ Warenausgangskontrolle verwendet, so können ins-besondere in der Pharmazeutischen Industrie die Vorteile der Technologie voll ausgereizt werden. Die wohl wichtigste Anwendung ist die lückenlose Rückverfolgung entlang der Lieferkette, wie sie in den USA bereits in einigen Staaten für alle pharmazeutischen Produkte vorgeschrieben und auch in Deutschland für bestimmte Produkte erforderlich ist. Zudem können die RFID Transponder auf der Produktver-packung als fälschungssicheres Merkmal eingesetzt werden. Bei temperatursensiblen Produkten können Transponder mit zusätzlicher Sensorik zur Überwachung der Kühlkette dienen. Gleichzeitig kann der Transponder auch als Diebstahlsicherung im innerbetrieblichen Bereich sowie auch im Handel dienen und ermöglicht dabei eine höhere Sicherheit als die bisher eingesetzten 1-Bit Transponder. Die Trans-pondertechnologie kann außerdem den Barcode ganz oder teilweise ersetzen und so einen großen Beitrag zur Prozessautomatisierung leisten.