ENZYMATIC RESOLUTION OF ANTIDEPRESSANT DRUG PRECURSORS IN AN UNDERGRADUATE LABORATORY

The use of biocatalysts in synthetic chemistry is a conventional methodology for preparing enantiomerically enriched compounds. Despite this fact, the number of experiments in chemical teaching laboratories that demonstrate the potential of enzymes in synthetic organic chemistry is limited. We describe a laboratory experiment in which students synthesized a chiral secondary alcohol that can be used in the preparation of antidepressant drugs. This experiment was conducted by individual students as part of a Drug Synthesis course held at the Pharmacy Faculty, Lisbon University. This laboratory experiment requires six laboratory periods, each lasting four hours. During the first four laboratory periods, students synthesized and characterized a racemic ester using nuclear magnetic resonance spectroscopy and gas chromatography. During the last two laboratory periods, they performed enzymatic hydrolysis resolution of the racemic ester using Candida antarctica lipase B to yield enantiomerically enriched secondary alcohol. Students successfully prepared the racemic ester with a 70%-81% overall yield in three steps. The enzymatic hydrolysis afforded (R)- secondary alcohol with good enantioselectivity (90%-95%) and reasonable yields (10%-19%). In these experiments, students were exposed to theoretical and practical concepts of aromatic acylation, ketone reduction, esterification, and enzymatic hydrolysis.

Consumer Attitudes on Aroma Printing

Olfactory packaging is an emerging technology which uses the aromatic capsules to release various scents. Normally, manufacturers add these aromatic capsules in the printing ink, the label or packaging material itself. When the aromatic capsules meet suitable release triggers, the scents will be released. The common release triggers are external forces, temperature changes, humidity changes and so on. The aim for this Masters of Science Thesis is to understand the aroma printing technology from literature and make market research for this kind of technology. The main target is to collect the current technology principle of aroma packaging and figure out how they are implemented on products with those. In addition, an investigation is made about consumers' attitudes from Chinese and Finnish market through the questionnaire, and the market potential is analyzed as well. The key points researched in this work are: the general attitudes on aroma printing technology, market potential and economic possibilities. This thesis specifies the main technologies used in aroma printing, the solutions of products with aroma packaging and the original results of the questionnaires. It also includes analysis of the acceptance of Chinese and Finnish consumers, what are their opinions of the aroma printing technology and the products packed by aroma printing technology. In addition, various factors which impact the market is discussed in the thesis. At last, some comparisons are made from the point of views of similarities and differences between Chinese and Finnish market.

Production of natural aroma by yeast in wastewater of cassava starch industry

ABSTRACT2-Phenylethanol (PE) is an aromatic alcohol with a characteristic odor of roses, widely used in food industry to modify certain aroma compositions in formulations with fruit, jam, pudding, and chewing gums, and also in cosmetic and fragrance industry. This compound occurs naturally in low concentrations in some essential oils from flowers and plants. An alternative to plants extraction are biotechnological processes. This study evaluated 2-phenylethanol’s production in cultivation of Saccharomyces cerevisiae in cassava wastewater originated from starch industry. The substrate was supplemented with glucose and L-phenylalanine in order to obtain higher 2-phenylethanol concentrations and better efficiency in glucose/2-phenylethanol conversion. It was performed using Rotatable Center Composite Design and response surface analysis. Cultures were performed under aerobic conditions in a batch system in Erlenmeyer flasks containing 50 mL of medium in shaker at 150 rpm and 24 ± 1 ºC. The highest PE values ​​were obtained with supplementation of 20.0 g.L-1 of glucose and 5.5 g.L-1 of L-phenylalanine, which has been experimentally validated, obtaining a PE production of 1.33 g.L-1 and PE/glucose yield factor of 0.070 g.g-1, equivalent to 74.3 and 89.7% ​​of desirability values according to the validated model.

Effect of additives, precursors and process conditions on particle morphology

The objective of the thesis was to develop methods to manufacture and control calcium carbonate crystal nucleation and growth in precipitation process. The work consists of experimental part and literature part that addresses theory of nucleation, crystallization and precipitation. In the experimental part calcium carbonate was precipitated using carbonization reaction. Precipitation was carried out in presence of known morphology controlling agents (anionic polymers and sodium silicate) and by using different operation conditions. Formed material was characterized using SEM images, and its thermal stability was assessed. This work demonstrates that carbon dioxide feeding rate and concentrations of calcium hydroxide and additives can be used to control size, shape and amount of precipitating calcium carbonate.

Detection of Illicit Drugs and Drug Precursors with Cantilever-Enhanced Photoacoustic Spectroscopy

In this study, cantilever-enhanced photoacoustic spectroscopy (CEPAS) was applied in different drug detection schemes. The study was divided into two different applications: trace detection of vaporized drugs and drug precursors in the gas-phase, and detection of cocaine abuse in hair. The main focus, however, was the study of hair samples. In the gas-phase, methyl benzoate, a hydrolysis product of cocaine hydrochloride, and benzyl methyl ketone (BMK), a precursor of amphetamine and methamphetamine were investigated. In the solid-phase, hair samples from cocaine overdose patients were measured and compared to a drug-free reference group. As hair consists mostly of long fibrous proteins generally called keratin, proteins from fingernails and saliva were also studied for comparison. Different measurement setups were applied in this study. Gas measurements were carried out using quantum cascade lasers (QLC) as a source in the photoacoustic detection. Also, an external cavity (EC) design was used for a broader tuning range. Detection limits of 3.4 particles per billion (ppb) for methyl benzoate and 26 ppb for BMK in 0.9 s were achieved with the EC-QCL PAS setup. The achieved detection limits are sufficient for realistic drug detection applications. The measurements from drug overdose patients were carried out using Fourier transform infrared (FTIR) PAS. The drug-containing hair samples and drug-free samples were both measured with the FTIR-PAS setup, and the measured spectra were analyzed statistically with principal component analysis (PCA). The two groups were separated by their spectra with PCA and proper spectral pre-processing. To improve the method, ECQCL measurements of the hair samples, and studies using photoacoustic microsampling techniques, were performed. High quality, high-resolution spectra with a broad tuning range were recorded from a single hair fiber. This broad tuning range of an EC-QCL has not previously been used in the photoacoustic spectroscopy of solids. However, no drug detection studies were performed with the EC-QCL solid-phase setup.

Immunophenotype of normal and leukemic bone marrow B-precursors in a Brazilian population. A comparative analysis by quantitative fluorescence cytometry

The distinction between normal and leukemic bone marrow (BM) B-precursors is essential for the diagnosis and treatment monitoring of acute lymphoblastic leukemia (ALL). In order to evaluate the potential use of quantitative fluorescence cytometry (QFC) for this distinction, we studied 21 normal individuals and 40 patients with CD10+ ALL. We characterized the age-related changes of the CD10, CD19, TdT, CD34 and CD79a densities in normal and leukemic BM. Compared to normal adults, the B-precursors from normal children expressed significantly lower values of CD34-specific antibody binding capacity (SABC) (median value of 86.6 vs 160.2 arbitrary units (a.u.) in children and adults, respectively). No significant age-related difference was observed in the expression of the other markers in the normal BM, or in any of the markers in the leukemic BM. Based on the literature, we set the cut-off value for the normal CD10 expression at 45 x 10³ a.u. for both age groups. For the remaining markers we established the cut-off values based on the minimum-maximum values in the normal BM in each age group. The expression of CD10 was higher than the cut-off in 30 ALL cases and in 18 of them there was a concomitant aberrant expression of other markers. In 9 of the 10 CD10+ ALL with normal CD10 SABC values, the expression of at least one other marker was aberrant. In conclusion, the distinction between normal and leukemic cells by QFC was possible in 38/40 CD10+ ALL cases.

Lipases microbianas na produção de ésteres formadores de aroma

Foram testadas cinco lipases microbianas produzidas no Laboratório de Bioquímica de Alimentos-FEA-UNICAMP, quanto à capacidade de catalisar a síntese de ésteres formadores de aroma por esterificação em meio isento de solvente orgânico. A natureza da enzima assim como o tamanho da cadeia dos ácidos afetaram as taxas de conversão obtidas.Os melhores resultados obtidos foram 88 % de conversão na síntese de laurato de isoamila e 72% para propionato de isoamila pela lipase de Rhizopus sp após 24 horas de incubação, seguido de 82% de conversão na síntese de acetato de isopropila por Alcaligenes sp após 24 horas de incubação.

Studies on some precursors involved in meat flavour formation

The effect of some precursors on the formation of meat flavour during heating has been investigated. A comparison of the influence of three different precursors, inosine-5'-monophosphate (5'-IMP), cysteine and thiamine, added to the meat systems, showed that formation of certain heterocyclic compounds, like sulfur-containing furans, dithiolanones and thiophenes, was significantly affected by changes in the concentration of precursors. However, aliphatic compounds, such as hydrocarbons, alcohols and ketones were not changed by these additions. Inosine-5'-monophosphate was established to be more effective than cysteine or thiamine in the formation of some "meaty" volatiles, i.e. the furanthiols, when its concentration was increased 10 times in raw meat.

Composição de voláteis e perfil de aroma e sabor de méis de eucalipto e laranja

Neste trabalho foram analisados os compostos voláteis de amostras de mel de eucalipto e laranja colhidos nos estados de São Paulo e de Minas Gerais. O isolamento dos voláteis foi realizado empregando-se uma técnica de ''headspace'' dinâmico, a separação efetuada por cromatografia gasosa de alta resolução e a identificação por espectrometria de massas, Índices de Kovats e padrões, quando disponíveis. Foram identificados no mel de laranja o benzaldeído, o óxido cis de linalol, n-heptanal, 6-metil-5-hepten-2-ona, octanal e fenilacetaldeído, e em mel de eucalipto, o nonanal, 2-heptanona, 2-heptanol, octanol e nonanol. A caracterização sensorial desses méis foi obtida por Análise Descritiva Quantitativa e a aplicação de Análise dos Componentes Principais aos dados revelou que os descritores ''queimado'' e ''sabor residual'' caracterizam o mel de eucalipto, enquanto ''floral'' e ''cera'' caracterizam o mel de laranja. Entre os compostos identificados, o nonanal e o nonanol apresentaram contribuição sensorial importante ao mel de eucalipto, enquanto o fenilacetaldeído e o benzaldeído foram relacionados com os principais descritores do mel de laranja.

Recuperação e concentração de componentes do aroma de caju (Anacardium occidentale L.) por pervaporação

A pervaporação é um processo de separação por membranas, no qual misturas líquidas são fracionadas devido à sua vaporização parcial através de uma membrana densa de permeabilidade seletiva. Este processo pode ser utilizado na recuperação e concentração de componentes de aromas. O objetivo deste trabalho foi avaliar a pervaporação para obtenção de um extrato natural de aroma de caju, que poderá ser utilizado como aditivo na indústria de alimentos. Polpa de caju foi a matéria-prima utilizada no trabalho. O processo de pervaporação foi conduzido a 25 e 35 °C em membranas de polidimetilsiloxano. Foram recolhidas amostras do suco de caju, no início e ao final do processo, e do permeado para a caracterização do perfil aromático através de CG-EM. O processo de pervaporação apresentou um alto fluxo de permeado para o suco de caju, 0,11 e 0,17 kg.hm-2 a 25 e 35 °C, respectivamente. Os cromatogramas revelaram um grande aumento no número de picos nas amostras de permeado em relação aos cromatogramas das amostras do suco de caju original, sendo que cerca de 50% dos componentes identificados no permeado apresentaram um acréscimo em suas áreas em relação aos do suco original, indicando a potencialidade deste processo para a concentração do aroma de caju.

Head Space Solid Phase Micro-Extraction (HS - SPME) of volatile organic compounds produced by Sporidiobolus salmonicolor (CBS 2636)

The aim of the present study was the assessment of volatile organic compounds produced by Sporidiobolus salmonicolor (CBS 2636) using methyl and ethyl ricinoleate, ricinoleic acid and castor oil as precursors. The analysis of the volatile organic compounds was carried out using Head Space Solid Phase Micro-Extraction (HS - SPME). Factorial experimental design was used for investigating extraction conditions, verifying stirring rate (0-400 rpm), temperature (25-60 ºC), extraction time (10-30 minutes), and sample volume (2-3 mL). The identification of volatile organic compounds was carried out by Gas Chromatography with Mass Spectrum Detector (GC/MSD). The conditions that resulted in maximum extraction were: 60 ºC, 10 minutes extraction, no stirring, sample volume of 2.0 mL, and addition of saturated KCl (1:10 v/v). In the bio-production of volatile organic compounds the effect of stirring rate (120-200 rpm), temperature (23-33 ºC), pH (4.0-8.0), precursor concentration (0.02-0.1%), mannitol (0-6%), and asparagine concentration (0-0.2%) was investigated. The bio-production at 28 ºC, 160 rpm, pH 6,0 and with the addition of 0.02% ricinoleic acid to the medium yielded the highest production of VOCs, identified as 1,4-butanediol, 1,2,2-trimethylciclopropilamine, beta-ionone; 2,3-butanodione, pentanal, tetradecane, 2-isononenal, 4-octen-3-one, propanoic acid, and octadecane.

Retenção de aroma na secagem em atmosferas normal e modificada: desenvolvimento do sistema de estudo

Na secagem de determinados alimentos, como frutas, juntamente com a água há também a evaporação de outras substâncias voláteis presentes em quantidades menores. Por isso, torna-se interessante considerar nos estudos de secagem a evaporação, além da água, desses outros componentes voláteis. A modificação da atmosfera tem sido utilizada em armazenamento, principalmente de vegetais, mas pode também ser estendida à secagem, pois pode influenciar a perda de voláteis responsáveis pelas características sensoriais do produto final. No presente trabalho, é apresentado um sistema de secagem previamente desenvolvido, no qual a atmosfera de secagem pode ser modificada pela adição de gases ou líquidos. Desenvolveu-se um sistema-modelo a partir da composição química básica do abacaxi e da adição de outros compostos, contendo um dos principais componentes do aroma desta fruta (hexanoato de etila). Além disso, também foi desenvolvida a metodologia analítica de determinação do aroma no sistema-modelo e no abacaxi, a partir dos estudos de extração de aromas e de análise cromatográfica gasosa. O aroma presente no sistema-modelo foi extraído em hexano e os componentes voláteis do aroma do abacaxi foram extraídos em éter etílico

Influence of thermal treatment of wood on the aroma of a sugar cane spirit (cachaça) model-solution

The aging process of alcoholic beverages is generally conducted in wood barrels made with species from Quercus sp. Due to the high cost and the lack of viability of commercial production of these trees in Brazil, there is demand for new alternatives to using other native species and the incorporation of new technologies that enable greater competitiveness of sugar cane spirit aged in Brazilian wood. The drying of wood, the thermal treatment applied to it, and manufacturing techniques are important tools in defining the sensory quality of alcoholic beverages after being placed in contact with the barrels. In the thermal treatment, several compounds are changed by the application of heat to the wood and various studies show the compounds are modified, different aromas are developed, there is change in color, and beverages achieve even more pleasant taste, when compared to non-treated woods. This study evaluated the existence of significant differences between hydro-alcoholic solutions of sugar cane spirits elaborated from different species of thermo-treated and non-treated wood in terms of aroma. An acceptance test was applied to evaluate the solutions preferred by tasters under specific test conditions.

Study of the volatile compounds from plum (Prunus domestica L. cv. Horvin) and estimation of their contribution to the fruit aroma

Simultaneous Distillation-Extraction (SDE) and headspace-solid phase microextraction (HS-SPME) combined with GC-FID and GC-MS were used to analyze volatile compounds from plum (Prunus domestica L. cv. Horvin) and to estimate the most odor-active compounds by application of the Odor Activity Values (OAV). The analyses led to the identification of 148 components, including 58 esters, 23 terpenoids, 14 aldehydes, 11 alcohols, 10 ketones, 9 alkanes, 7 acids, 4 lactones, 3 phenols, and other 9 compounds of different structures. According to the results of SDE-GC-MS, SPME-GC-MS and OAV, ethyl 2-methylbutanoate, hexyl acetate, (E)-2-nonenal, ethyl butanoate, (E)-2-decenal, ethyl hexanoate, nonanal, decanal, (E)-β-ionone, Γ-dodecalactone, (Z)-3-hexenyl acetate, pentyl acetate, linalool, Γ-decalactone, butyl acetate, limonene, propyl acetate, Δ-decalactone, diethyl sulfide, (E)-2-hexenyl acetate, ethyl heptanoate, (Z)-3-hexenol, (Z)-3-hexenyl hexanoate, eugenol, (E)-2-hexenal, ethyl pentanoate, hexyl 2-methylbutanoate, isopentyl hexanoate, 1-hexanol, Γ-nonalactone, myrcene, octyl acetate, phenylacetaldehyde, 1-butanol, isobutyl acetate, (E)-2-heptenal, octadecanal, and nerol are characteristic odor active compounds in fresh plums since they showed concentrations far above their odor thresholds.

Comparison between aroma compounds in wines from four Vitis vinifera grape varieties grown in different shoot positions

The aroma characteristics of wines from four Vitis vinifera grape varieties (‘Cabernet sauvignon’, ‘Merlot’, ‘Chardonnay’, and ‘Italian Riesling’) grown in three shoot positions were evaluated by HS-SPME-GC/MS. In this study, the numerous significant differences found in most of the aromatic compounds influence of different shoot positions on the quality of wine. The results showed that the middle shoot position increased significantly the aroma concentration in the majority of wines investigated. The volatile components showing the greatest differences in the wines of different cultivars were aldehydes and terpenes. 8 and 11 compounds were found and quantified (OAVs>1) in the two red wines and white wines at concentrations higher than their corresponding odor thresholds, respectively; and therefore they significantly contributed to the wine aromas. According to their OAVs, fruity, floral, cheese and fatty aroma strongly influenced the characteristics of the four monovarietal wines, while the two white wines showed the green and fresh aroma characteristics. These results are related to the different microclimate of the canopies of the different shoot positions and varieties. They suggest that proper elevating the fruiting zones could improve the accumulation of aroma compounds in wines from the different varieties. On the other hand, grapevines trained to systems with uniform fruiting zones could improve the quality of wine.