87 resultados para apertures
Resumo:
We have simulated the performance of various apertures used in Coded Aperture Imaging - optically. Coded pictures of extended and continuous-tone planar objects from the Annulus, Twin Annulus, Fresnel Zone Plate and the Uniformly Redundant Array have been decoded using a noncoherent correlation process. We have compared the tomographic capabilities of the Twin Annulus with the Uniformly Redundant Arrays based on quadratic residues and m-sequences. We discuss the ways of reducing the 'd. c.' background of the various apertures used. The non-ideal System-Point-Spread-Function inherent in a noncoherent optical correlation process produces artifacts in the reconstruction. Artifacts are also introduced as a result of unwanted cross-correlation terms from out-of-focus planes. We find that the URN based on m-sequences exhibits good spatial resolution and out-of-focus behaviour when imaging extended objects.
Resumo:
The purpose of this research is to analyze different daylighting systems in schools in the city of Natal/RN. Although with the abundantly daylight available locally, there are a scarce and diffuse architectural recommendations relating sky conditions, dimensions of daylight systems, shading, fraction of sky visibility, required illuminance, glare, period of occupation and depth of the lit area. This research explores different selected apertures systems to explore the potential of natural light for each system. The method has divided into three phases: The first phase is the modeling which involves the construction of three-dimensional model of a classroom in Sketchup software 2014, which is featured in follow recommendations presented in the literature to obtain a good quality of environmental comfort in school settings. The second phase is the dynamic performance computer simulation of the light through the Daysim software. The input data are the climate file of 2009 the city of Natal / RN, the classroom volumetry in 3ds format with the assignment of optical properties of each surface, the sensor mapping file and the user load file . The results produced in the simulation are organized in a spreadsheet prepared by Carvalho (2014) to determine the occurrence of useful daylight illuminance (UDI) in the range of 300 to 3000lux and build graphics illuminance curves and contours of UDI to identify the uniformity of distribution light, the need of the minimum level of illuminance and the occurrence of glare.
Resumo:
The aim of this study was to present a new methodology for evaluating the pelvic floor muscle (PFM) passive properties. The properties were assessed in 13 continent women using an intra-vaginal dynamometric speculum and EMG (to ensure the subjects were relaxed) in four different conditions: (1) forces recorded at minimal aperture (initial passive resistance); (2) passive resistance at maximal aperture; (3) forces and passive elastic stiffness (PES) evaluated during five lengthening and shortening cycles; and (4) percentage loss of resistance after 1 min of sustained stretch. The PFMs and surrounding tissues were stretched, at constant speed, by increasing the vaginal antero-posterior diameter; different apertures were considered. Hysteresis was also calculated. The procedure was deemed acceptable by all participants. The median passive forces recorded ranged from 0.54 N (interquartile range 1.52) for minimal aperture to 8.45 N (interquartile range 7.10) for maximal aperture while the corresponding median PES values were 0.17 N/mm (interquartile range 0.28) and 0.67 N/mm (interquartile range 0.60). Median hysteresis was 17.24 N∗mm (interquartile range 35.60) and the median percentage of force losses was 11.17% (interquartile range 13.33). This original approach to evaluating the PFM passive properties is very promising for providing better insight into the patho-physiology of stress urinary incontinence and pinpointing conservative treatment mechanisms.
Resumo:
As the world's synchrotrons and X-FELs endeavour to meet the need to analyse ever-smaller protein crystals, there grows a requirement for a new technique to present nano-dimensional samples to the beam for X-ray diffraction experiments.The work presented here details developmental work to reconfigure the nano tweezer technology developed by Optofluidics (PA, USA) for the trapping of nano dimensional protein crystals for X-ray crystallography experiments. The system in its standard configuration is used to trap nano particles for optical microscopy. It uses silicon nitride laser waveguides that bridge a micro fluidic channel. These waveguides contain 180 nm apertures of enabling the system to use biologically compatible 1.6 micron wavelength laser light to trap nano dimensional biological samples. Using conventional laser tweezers, the wavelength required to trap such nano dimensional samples would destroy them. The system in its optical configuration has trapped protein molecules as small as 10 nanometres.
Resumo:
As the world's synchrotrons and X-FELs endeavour to meet the need to analyse ever-smaller protein crystals, there grows a requirement for a new technique to present nano-dimensional samples to the beam for X-ray diffraction experiments.The work presented here details developmental work to reconfigure the nano tweezer technology developed by Optofluidics (PA, USA) for the trapping of nano dimensional protein crystals for X-ray crystallography experiments. The system in its standard configuration is used to trap nano particles for optical microscopy. It uses silicon nitride laser waveguides that bridge a micro fluidic channel. These waveguides contain 180 nm apertures of enabling the system to use biologically compatible 1.6 micron wavelength laser light to trap nano dimensional biological samples. Using conventional laser tweezers, the wavelength required to trap such nano dimensional samples would destroy them. The system in its optical configuration has trapped protein molecules as small as 10 nanometres.
Resumo:
This work focuses on the construction and application of coded apertures to compressive X-ray tomography. Coded apertures can be made in a number of ways, each method having an impact on system background and signal contrast. Methods of constructing coded apertures for structuring X-ray illumination and scatter are compared and analyzed. Apertures can create structured X-ray bundles that investigate specific sets of object voxels. The tailored bundles of rays form a code (or pattern) and are later estimated through computational inversion. Structured illumination can be used to subsample object voxels and make inversion feasible for low dose computed tomography (CT) systems, or it can be used to reduce background in limited angle CT systems.
On the detection side, coded apertures modulate X-ray scatter signals to determine the position and radiance of scatter points. By forming object dependent projections in measurement space, coded apertures multiplex modulated scatter signals onto a detector. The multiplexed signals can be inverted with knowledge of the code pattern and system geometry. This work shows two systems capable of determining object position and type in a 2D plane, by illuminating objects with an X-ray `fan beam,' using coded apertures and compressive measurements. Scatter tomography can help identify materials in security and medicine that may be ambiguous with transmission tomography alone.
Resumo:
The aim of this study was to present a new methodology for evaluating the pelvic floor muscle (PFM) passive properties. The properties were assessed in 13 continent women using an intra-vaginal dynamometric speculum and EMG (to ensure the subjects were relaxed) in four different conditions: (1) forces recorded at minimal aperture (initial passive resistance); (2) passive resistance at maximal aperture; (3) forces and passive elastic stiffness (PES) evaluated during five lengthening and shortening cycles; and (4) percentage loss of resistance after 1 min of sustained stretch. The PFMs and surrounding tissues were stretched, at constant speed, by increasing the vaginal antero-posterior diameter; different apertures were considered. Hysteresis was also calculated. The procedure was deemed acceptable by all participants. The median passive forces recorded ranged from 0.54 N (interquartile range 1.52) for minimal aperture to 8.45 N (interquartile range 7.10) for maximal aperture while the corresponding median PES values were 0.17 N/mm (interquartile range 0.28) and 0.67 N/mm (interquartile range 0.60). Median hysteresis was 17.24 N∗mm (interquartile range 35.60) and the median percentage of force losses was 11.17% (interquartile range 13.33). This original approach to evaluating the PFM passive properties is very promising for providing better insight into the patho-physiology of stress urinary incontinence and pinpointing conservative treatment mechanisms.
Resumo:
Flow, recharge and transport dynamics in fractured rock aquifers with low lying rock outcrops is a largely unexplored area of study in hydrogeology. The purpose of this thesis is to examine these topics in an agricultural area in Eastern Ontario. The study consists of a regional scale groundwater quality study, an infiltration experiment that considers bacteria transport from the ground surface to a well, and a numerical modelling study that tests the parameters that affect surface infiltration of a tracer from a rock outcrop to a deeper horizontal fracture. In the water quality study, approximately 65% of the samples contained total coliform, 16% contained E. coli, and 1% contained nitrate-N at greater than 5 mg/L. Occurrence of E. coli increased when considering seasonality, where wells were drilled on rock outcrops, and for shallow well intervals. Nitrate-N did not occur above the Guidelines for Canadian Drinking Water Quality (Health Canada, 2012) of 10 mg/L. Rapid arrival times were observed in the infiltration study for both the microspheres (30 minutes) and a dye tracer (45 minutes) in a well approximately 6.0 m in horizontal and 2.8 m in vertical distance from the tracer source. Transport velocities were approximately 38.9 m/day for the dye tracer and 115.2 m/day for the colloidal tracer. Results of the model runs indicate that overburden can provide an effective protective layer to transport in fractures, that high groundwater velocities occur in larger fracture apertures and higher gradients dilute tracer concentrations, and that lower groundwater velocities occur with smaller fracture apertures and lower gradients result in elevated tracer concentrations. Lower rainfall rates, larger fracture apertures, early tracer time, larger gradients, and lower water levels maintained unsaturated conditions for longer time periods such that tracer transport was delayed until saturated conditions were attained. The overall heterogeneity of this aquifer environment creates a source water protection conundrum where the water quality is generally good, while transport can occur very quickly in proximity to rock outcrops and in areas with limited overburden.
Resumo:
Photometry of moving sources typically suffers from a reduced signal-to-noise ratio (S/N) or flux measurements biased to incorrect low values through the use of circular apertures. To address this issue, we present the software package, TRIPPy: TRailed Image Photometry in Python. TRIPPy introduces the pill aperture, which is the natural extension of the circular aperture appropriate for linearly trailed sources. The pill shape is a rectangle with two semicircular end-caps and is described by three parameters, the trail length and angle, and the radius. The TRIPPy software package also includes a new technique to generate accurate model point-spread functions (PSFs) and trailed PSFs (TSFs) from stationary background sources in sidereally tracked images. The TSF is merely the convolution of the model PSF, which consists of a moffat profile, and super-sampled lookup table. From the TSF, accurate pill aperture corrections can be estimated as a function of pill radius with an accuracy of 10 mmag for highly trailed sources. Analogous to the use of small circular apertures and associated aperture corrections, small radius pill apertures can be used to preserve S/Ns of low flux sources, with appropriate aperture correction applied to provide an accurate, unbiased flux measurement at all S/Ns.
Resumo:
This paper studies modern houses built in the neighborhoods of Cabo Branco, Tambaú and Manaíra by the seafront in Joao Pessoa, built between 1960 and 1974. We start from the already widespread notion that Brazilian Modern Architecture was inspired by foreign ways, mainly European but also American here recast, adapted, often innovating repertoire and ideas received (Y. BRUAND, 2005; H. SEGAWA, 2002; C. E. COMAS, 2002; C. E. COMAS, 2002; M. M. ACAYABA e S. FICHER, 1982; M. B. C. ARANHA, 2008; F. C. L. LARA, 2001; R. V. ZEIN, 2005; L. E. AMORIM, 1999, C. V. STINCO, 2010). With this look, after a field study, we collected 61 specimens in the collection of the Central Archive of João Pessoa City Hall, in order to identify which reformulations, adaptations or innovations would exist in modern houses built along the coast in João Pessoa. As we try to analyze the houses by what the bibliography had suggested (G. C. ARGAN, 1992; L. CORBUSIER, 2002; C.E.D. e M. ADRIÀ, 2007; K. FRAMPTON, 1997; H. H. HITCHCOCK, 1976; L. BENEVOLO, 2004; R. DE FUSCO, 1992, N . PEVSNER, 2002; M. RAGON, 1986; B. RISEBERO, 1982; E. ROBBINS, 1997; W. J. R. CURTIS, 1982; V. SCULLY, 2003; B. ZEVI, 1984; D. DUNST, 1999; A. COLQUHOUN, 2002; R. WESTON, 2005; A. IÑAKI, 2006; J. PETER, 1994) the starting idea seemed to us not sufficiently developed. So we decided, first, to undertake a literature review comparing speech and image of modern houses most often cited by international and national literature, following a script freely inspired the Vitruvian triad: the functional and spatial (sectorization, guidance, spatiality, movement); constructive aspects (structural elements, modulation, deck, sealing), and aesthetic aspects (composition, apertures, ornaments) (Cap.1), then cast a look under this same route in 61 specimens obtained initially, trying to verify any specificities they would have (Cap.2). Failing to deepen the analysis of all these examples, we chose 10 projects which were redesigned and described in more detail to which we supplement with the aspects of place - location / lot location, access, axiality. (E. C. MAHFUZ, 2002; J. C. MIGUEL, 2000; E. C. CHEREGATI, 2007; M. COTRIM, 2007). (Cap. 3). The documentation and description resulting allowed us to approach some related questions about the canonical transcripts hybridizing, adoptions and any vernacular innovations of modern houses along the coast, We conclude that the appellants and anachronistic elements isolates found in each of the studied bind to the Brazilian Modern Architecture
Resumo:
This paper aims to provide aperture corrections for emission lines in a sample of spiral galaxies from the Calar Alto Legacy Integral Field Area Survey (CALIFA) database. In particular, we explore the behavior of the log([O III] λ5007/Hβ)/([N II] λ6583/Hα) (O3N2) and log[N II] lambda 6583/Hα (N2) flux ratios since they are closely connected to different empirical calibrations of the oxygen abundances in star-forming galaxies. We compute the median growth curves of Hα, Hα/Hβ, O3N2, and N-2 up to 2.5R(50) and 1.5 disk R-eff. These distances cover most of the optical spatial extent of the CALIFA galaxies. The growth curves simulate the effect of observing galaxies through apertures of varying radii. We split these growth curves by morphological types and stellar masses to check if there is any dependence on these properties. The median growth curve of the Hα flux shows a monotonous increase with radius with no strong dependence on galaxy inclination, morphological type, and stellar mass. The median growth curve of the Hα/HβH ratio monotonically decreases from the center toward larger radii, showing for small apertures a maximum value of ≈10% larger than the integrated one. It does not show any dependence on inclination, morphological type, and stellar mass. The median growth curve of N-2 shows a similar behavior, decreasing from the center toward larger radii. No strong dependence is seen on the inclination, morphological type, and stellar mass. Finally, the median growth curve of O3N2 increases monotonically with radius, and it does not show dependence on the inclination. However, at small radii it shows systematically higher values for galaxies of earlier morphological types and for high stellar mass galaxies. Applying our aperture corrections to a sample of galaxies from the SDSS survey at 0.02 ≤ z ≤ 0.3 shows that the average difference between fiber-based and aperture-corrected oxygen abundances, for different galaxy stellar mass and redshift ranges, reaches typically to ≈11%, depending on the abundance calibration used. This average difference is found to be systematically biased, though still within the typical uncertainties of oxygen abundances derived from empirical calibrations. Caution must be exercised when using observations of galaxies for small radii (e.g., below 0.5 R_eff) given the high dispersion shown around the median growth curves. Thus, the application of these median aperture corrections to derive abundances for individual galaxies is not recommended when their fluxes come from radii much smaller than either R_50 or R_eff.
Resumo:
This paper studies modern houses built in the neighborhoods of Cabo Branco, Tambaú and Manaíra by the seafront in Joao Pessoa, built between 1960 and 1974. We start from the already widespread notion that Brazilian Modern Architecture was inspired by foreign ways, mainly European but also American here recast, adapted, often innovating repertoire and ideas received (Y. BRUAND, 2005; H. SEGAWA, 2002; C. E. COMAS, 2002; C. E. COMAS, 2002; M. M. ACAYABA e S. FICHER, 1982; M. B. C. ARANHA, 2008; F. C. L. LARA, 2001; R. V. ZEIN, 2005; L. E. AMORIM, 1999, C. V. STINCO, 2010). With this look, after a field study, we collected 61 specimens in the collection of the Central Archive of João Pessoa City Hall, in order to identify which reformulations, adaptations or innovations would exist in modern houses built along the coast in João Pessoa. As we try to analyze the houses by what the bibliography had suggested (G. C. ARGAN, 1992; L. CORBUSIER, 2002; C.E.D. e M. ADRIÀ, 2007; K. FRAMPTON, 1997; H. H. HITCHCOCK, 1976; L. BENEVOLO, 2004; R. DE FUSCO, 1992, N . PEVSNER, 2002; M. RAGON, 1986; B. RISEBERO, 1982; E. ROBBINS, 1997; W. J. R. CURTIS, 1982; V. SCULLY, 2003; B. ZEVI, 1984; D. DUNST, 1999; A. COLQUHOUN, 2002; R. WESTON, 2005; A. IÑAKI, 2006; J. PETER, 1994) the starting idea seemed to us not sufficiently developed. So we decided, first, to undertake a literature review comparing speech and image of modern houses most often cited by international and national literature, following a script freely inspired the Vitruvian triad: the functional and spatial (sectorization, guidance, spatiality, movement); constructive aspects (structural elements, modulation, deck, sealing), and aesthetic aspects (composition, apertures, ornaments) (Cap.1), then cast a look under this same route in 61 specimens obtained initially, trying to verify any specificities they would have (Cap.2). Failing to deepen the analysis of all these examples, we chose 10 projects which were redesigned and described in more detail to which we supplement with the aspects of place - location / lot location, access, axiality. (E. C. MAHFUZ, 2002; J. C. MIGUEL, 2000; E. C. CHEREGATI, 2007; M. COTRIM, 2007). (Cap. 3). The documentation and description resulting allowed us to approach some related questions about the canonical transcripts hybridizing, adoptions and any vernacular innovations of modern houses along the coast, We conclude that the appellants and anachronistic elements isolates found in each of the studied bind to the Brazilian Modern Architecture
