重离子加速器注入器电源控制器的设计；Design of digital power control system applied in sector focusing cyclotron

设计了一种应用于兰州重离子加速器注入器的电源控制器,该控制器基于微处理器AT-mega128,结合MAX7000系列的复杂可编程器件和RTL8019AS网关芯片来实现对电源系统的控制,并通过RS-232总线实现与上位机的串口通信。应用结果表明,该控制器具有良好的通用性、灵活性、可远程控制及性能稳定等特点,实现了注入器磁铁电源10-4量级的幅度稳定性,使注入器引出的束流强度、束流品质、束流稳定性和供束效率等得到很大的提高。

基于CPLD和ATMEGAL128的数字电源系统的设计；Design of Digital Power Control System Based on CPLD and ATMEGAL128

介绍了一种基于CPLD设计的电源控制模块,并且利用Atmegal128单片机和RTL8019S实现逻辑功能和远程控制功能。该电源系统主要用于重离子加速器注入器(SFC)中,具有很好的灵活性、可远程控制、性能稳定等特点。

Application of digital image analysis to the study of banded spherulite during growing and melting process

A digital image analysis(DIA) technique can be applied directly to the image obtained by polarizing microscope. The time-resolved DIA apparatus including image collecting, showing and data analysis has been home-made. As an example, it has been used to study the banded spherulite in the blends of poly(epsilon-caprolactone) (PCL) and poly(styrene-ran-acrylonitrile) (SAN).

Design of digital differentiators

A digital differentiator simply involves the derivation of an input signal. This work includes the presentation of first-degree and second-degree differentiators, which are designed as both infinite-impulse-response (IIR) filters and finite-impulse-response (FIR) filters. The proposed differentiators have low-pass magnitude response characteristics, thereby rejecting noise frequencies higher than the cut-off frequency. Both steady-state frequency-domain characteristics and Time-domain analyses are given for the proposed differentiators. It is shown that the proposed differentiators perform well when compared to previously proposed filters. When considering the time-domain characteristics of the differentiators, the processing of quantized signals proved especially enlightening, in terms of the filtering effects of the proposed differentiators. The coefficients of the proposed differentiators are obtained using an optimization algorithm, while the optimization objectives include magnitude and phase response. The low-pass characteristic of the proposed differentiators is achieved by minimizing the filter variance. The low-pass differentiators designed show the steep roll-off, as well as having highly accurate magnitude response in the pass-band. While having a history of over three hundred years, the design of fractional differentiator has become a ‘hot topic’ in recent decades. One challenging problem in this area is that there are many different definitions to describe the fractional model, such as the Riemann-Liouville and Caputo definitions. Through use of a feedback structure, based on the Riemann-Liouville definition. It is shown that the performance of the fractional differentiator can be improved in both the frequency-domain and time-domain. Two applications based on the proposed differentiators are described in the thesis. Specifically, the first of these involves the application of second degree differentiators in the estimation of the frequency components of a power system. The second example concerns for an image processing, edge detection application.

Chemical and biological applications of digital-microfluidic devices

The advent of digital microfluidic lab-on-a-chip (LoC) technology offers a platform for developing diagnostic applications with the advantages of portability, reduction of the volumes of the sample and reagents, faster analysis times, increased automation, low power consumption, compatibility with mass manufacturing, and high throughput. Moreover, digital microfluidics is being applied in other areas such as airborne chemical detection, DNA sequencing by synthesis, and tissue engineering. In most diagnostic and chemical-detection applications, a key challenge is the preparation of the analyte for presentation to the on-chip detection system. Thus, in diagnostics, raw physiological samples must be introduced onto the chip and then further processed by lysing blood cells and extracting DNA. For massively parallel DNA sequencing, sample preparation can be performed off chip, but the synthesis steps must be performed in a sequential on-chip format by automated control of buffers and nucleotides to extend the read lengths of DNA fragments. In airborne particulate-sampling applications, the sample collection from an air stream must be integrated into the LoC analytical component, which requires a collection droplet to scan an exposed impacted surface after its introduction into a closed analytical section. Finally, in tissue-engineering applications, the challenge for LoC technology is to build high-resolution (less than 10 microns) 3D tissue constructs with embedded cells and growth factors by manipulating and maintaining live cells in the chip platform. This article discusses these applications and their implementation in digital-microfluidic LoC platforms. © 2007 IEEE.

The creative masses of digital Britain

The present recession has prompted scholarly and journalistic questioning of the contributions of the cultural industries to the economy. The talent-rich metropolitan clusters of London and New York are well-placed to ride out a thoroughgoing shakeup of the media markets if they manage their infrastructure, space and resources strategically, as Richard Florida has recently argued. This seems to be the assumption behind the recent Digital Britain interim report, and Gordon Brown's remarks that a digital revolution "lies at the heart" of Britain's economic recovery and that broadband and the media industry can play a leading role in pulling the UK out of the recession. Focusing on the Digital Britain report and consultation documents, this presentation seeks to unpack some of the fundamental assumptions behind this link between digital infrastructure, creativity and profitability. In particular the implicit notion of an engaged audience of users, generating "content" as well as shaping new media platforms calls into question long-held theoretical constructions of the mass audience of consumers as spectators; instead, the audience emerges as a potential economic powerhouse, an underused resource for tomorrow's cultural industries.

Use of Digital Manufacturing to Improve Management Learning in Aerospace Assembly

The primary goal of this work is to quantify any bene?ts that the use of digital manufacturing methods can offer when used upstream from production, for manufacturing process design, and tool development. Learning at this stage of product development is referred to as management learning. Animated build simulations have been used to develop build procedures and tooling for a panel assembly for the new Bombardier CRJ1000 (Canadair Regional Jet, 100 seat). When the jig format was developed, its simulated performance was compared to that of current CRJ700/900 panel builds to identify and quantify any improvements in terms of tooling cost and panel build time. When comparing like-for-like functions between existing CRJ700/900 (Canadair Regional Jet, 70/90 seat) and the
CRJ1000 tooling, it was predicted that the digitally assisted improvements had brought about a 4.9% reduction in jig cost. An evaluation of the build process for the CRJ1000 uplock panel predicted a 5.2% reduction in the assembly time. In addition to the improvement of existing tooling functions, new jig functionality was added so that both the drilling and riveting functions could be carried out in a single jig for the new RJ1000 panel.

Effectiveness of different footbath solutions in the treatment of digital dermatitis in dairy cows

Three experiments were conducted to test the effectiveness of different footbath solutions and regimens in the treatment of digital dermatitis (DD) in dairy cows. During the study, groups of cows walked through allocated footbath solutions after milking on 4 consecutive occasions. All cows were scored weekly for DD lesion stage on the hind feet during milking. A “transition grade” was assigned on the basis of whether the DD lesions improved (1) or deteriorated or did not improve (0) from week to week. This grade per cow was averaged for all cows in the group. In experiment 1, 118 cows were allocated to 1 of 3 footbath treatments for 5 wk: (1) 5% CuSO4 each week, (2) 2% ClO- each week, or (3) no footbath (control). The mean transition grade, and proportion of cows without DD lesions at the end of the trial were significantly higher for treatment 1 above (0.36, 0.13, and 0.11, respectively; standard error of the difference, SED=0.057). In experiment 2, 117 cows were allocated to 1 of 4 footbath treatment regimens for 8 wk: (1) 5% CuSO4 each week, (2) 2% CuSO4 each week, (3) 5% CuSO4 each fortnight, or (4) 2% CuSO4 each fortnight. For welfare reasons, cows allocated to the weekly and fortnightly footbath regimens had an average prevalence of >60% and =25% active DD at the start of the trial, respectively. Significantly more cows had no DD lesions (0.53 vs. 0.36, respectively; SED=0.049), and the mean transition grade of DD lesions was higher in the 5% compared with the 2% weekly CuSO4 treatment (0.52 vs. 0.38, respectively; SED=0.066). Similarly, significantly more cows had no DD lesions in the 5% compared with the 2% fortnightly CuSO4 treatments (0.64 vs. 0.47, respectively; SED=0.049). In experiment 3, 95 cows were allocated to 1 of 3 footbath treatments: (1) each week alternating 5% CuSO4 with 10% salt water, (2) each week alternating 5% CuSO4 with water, or (3) 5% CuSO4 each fortnight (control). After 10 wk, more cows had no DD in the salt water treatment than in the control treatment (0.35 vs. 0.26, respectively; SED=0.038), but levels of active lesions were higher for this treatment than in the other 2 treatments (0.17, 0.00, and 0.13, respectively; SED=0.029). Treatment did not affect mean transition grade of DD lesions. In conclusion, CuSO4 was the only footbath solution that was consistently effective for treatment of DD. In cases when DD prevalence was high, a footbath each week using 5% CuSO4 was the most effective treatment.

A Framework for the Evaluation of Digital Musical Instruments

At the outset of a discussion of evaluating digital musical instruments, that is to say instruments whose sound generators are digital and separable though not necessarily separate from their control interfaces (Malloch, 2006), it is reasonable to ask what the term evaluation in this context really means. After all, there may be many perspectives from which to view the effectiveness or otherwise of the instruments we build. For most performers, performance on an instrument becomes a means of evaluating how well it functions in the context of live music making, and their measure of success is the response of the audience to their performance. Audiences evaluate performances on the basis of how engaged they feel they have been by what they have seen and heard. When questioned, they are likely to describe good performances as “exciting,” “skillful,” “musical.” Bad performances are “boring,” and those which are marred by technical malfunction are often dismissed out of hand. If performance is considered to be a valid means of evaluating a musical instrument, then it follows that, for the field of DMI design, a much broader definition of the term “evaluation” than that typically used in human-computer interaction (HCI) is required to reflect the fact that there are a number of stakeholders involved in the design and evaluation of DMIs. In addition to players and audiences, there are also composers, instrument builders, component manufacturers, and perhaps even customers, each of whom will have a different concept of what is meant by “evaluation.”