Posthumanité et subjectivité transcendante dans l’œuvre de Philip K. Dick

La problématique à l’étude dans ce mémoire est la représentation et conceptualisation de la notion de posthumanité dans trois romans de Philip K.Dick : The Three Stigmata Of Palmer Eldritch, Do Androids Dream Of Electric Sheep? et Ubik. L’analyse de ces romans nous permettra de montrer que l’auteur américain focalise sa réflexion sur le posthumain sur la subjectivité transcendante de personnages qui absorbent, et se substituent à la réalité d’autres personnages dans leur environnement. Nous montrerons également que l’écriture de Dick a évolué vers une vision plus spirituelle ou mystique en se détachant graduellement du récit de science-fiction traditionnel. Ce développement aura des répercussions significatives sur sa postérité cyberpunk.

Essais sur la gestion des ressources forestières

Cette thèse est composée de trois essais en économie forestière. Les deux premiers s'intéressent à la fixation de la redevance optimale à laquelle fait face le propriétaire d'une ressource forestière dans un contexte d'information asymétrique. Le troisième analyse l'impact à long terme du recyclage sur la surface de terre affectée à la forêt. La gestion des ressources forestières implique souvent la délégation des droits de coupe par le propriétaire forestier à une entreprise exploitante. Cette délégation prend la forme d'un contrat de concession par lequel le propriétaire forestier octroie les droits d'exploitation aux compagnies forestières, en contrepartie d'une redevance (transfert monétaire). L'octroie des droits d'exploitation s'effectue généralement sous plusieurs modes, dont les plus répandus sont les appels d'offres publics et les contrats de gré à gré, où le propriétaire forestier et la firme exploitante spécifient entre autres la redevance dans les clauses d'exploitation de la forêt. Pour déterminer le mécanisme optimal (choix de la firme, âge de coupe et redevance), le propriétaire forestier a idéalement besoin de connaître les coûts de coupe et de reboisement. Or en réalité, les firmes sont mieux informées sur leurs coûts que le propriétaire forestier. Dans ce contexte d'information asymétrique, le mécanisme optimal doit donc prendre en considération des contraintes informationnelles. Les deux premiers essais caractérisent, sous ces conditions, l'âge de coupe optimal (la rotation optimale) et la redevance optimale. Le premier essai examine le contrat optimal quand le propriétaire forestier cède les droits de coupes à une firme par un accord de gré à gré ou par une procédure d'appel d'offre public au second prix. L'analyse du problème est menée premièrement dans un contexte statique, dans le sens que les coûts de coupe sont parfaitement corrélés dans le temps, puis dans un contexte dynamique, où les coûts sont indépendants dans le temps. L'examen en statique et en dynamique montre que la rotation optimale va satisfaire une version modifiée de la règle de Faustmann qui prévaudrait en information symétrique. Cette modification est nécessaire afin d'inciter la firme à révéler ses vrais coûts. Dans le cas statique, il en résulte que la rotation optimale est plus élevée en information asymétrique qu'en situation de pleine information. Nous montrons également comment le seuil maximal de coût de coupe peut être endogénéisé, afin de permettre au propriétaire d'accroître son profit espéré en s'assurant que les forêts non profitables ne seront pas exploitées. Nous comparons ensuite la redevance optimale en information asymétrique et symétrique. Les redevances forestières dans un arrangement de gré à gré étant généralement, en pratique, une fonction linéaire du volume de bois, nous dérivons le contrat optimal en imposant une telle forme de redevance et nous caractérisons la perte en terme de profit espéré qui résulte de l'utilisation de ce type de contrat plutôt que du contrat non linéaire plus général. Finalement, toujours dans le contexte statique, nous montrons à travers un mécanisme optimal d'enchère au second prix qu'en introduisant ainsi la compétition entre les firmes le propriétaire forestier augmente son profit espéré. Les résultats obtenus dans le contexte dynamique diffèrent pour la plupart de ceux obtenus dans le cas statique. Nous montrons que le contrat optimal prévoit alors que chaque type de firme, incluant celle ayant le coût le plus élevé, obtient une rente strictement positive, laquelle augmente dans le temps. Ceci est nécessaire pour obtenir la révélation à moindre coût à la période courante du véritable type de la firme. Comme implication, la rotation optimale s'accroît aussi dans le temps. Finalement, nous montrons qu'il y a distorsion en asymétrique d'information par rapport à l'optimum de pleine information même pour le coût le plus bas (la réalisation la plus favorable). La concurrence introduite dans le premier essai sous forme d'enchère au second prix suppose que chaque firme connaît exactement son propre coût de coupe. Dans le deuxième essai nous relâchons cette hypothèse. En réalité, ni le propriétaire forestier ni les firmes ne connaissent avec précision les coûts de coupe. Chaque firme observe de manière privée un signal sur son coût. Par exemple chaque firme est autorisée à visiter un lot pour avoir une estimation (signal) de son coût de coupe. Cependant cette évaluation est approximative. Ainsi, le coût de chaque firme va dépendre des estimations (signaux) d'autres firmes participantes. Nous sommes en présence d'un mécanisme à valeurs interdépendantes. Dans ce contexte, la valeur d'une allocation dépend des signaux de toutes les firmes. Le mécanisme optimal (attribution des droits d'exploitation, redevance et âge de coupe) est exploré. Nous déterminons les conditions sous lesquelles le mécanisme optimal peut être implémenté par une enchère au second prix et dérivons la rotation optimale et le prix de réserve dans le contexte de ce type d'enchère. Le troisième essai de la thèse analyse l'impact à long terme du recyclage sur la surface de terre affectée à la forêt. L'un des principaux arguments qui milite en faveur du recours au recyclage est que cela entraînerait une réduction de la coupe de bois, épargnant ainsi des arbres. L'objectif est donc d'aboutir à un nombre d'arbres plus important qu'en l'absence de recyclage. L'idée d'accroître le stock d'arbre tient au fait que les forêts génèrent des externalités: elles créent un flux de services récréatifs, freinent l'érosion des sols et des rives des cours d'eau et absorbent du dioxyde de carbone présent dans l'atmosphère. Étant donné la présence d'externalités, l'équilibre des marchés résulterait en un nombre d'arbre insuffisant, justifiant donc la mise en oeuvre de politiques visant à l'accroître. Le but de ce troisième essai est de voir dans quelle mesure la promotion du recyclage est un instrument approprié pour atteindre un tel objectif. En d'autres mots, comment le recyclage affecte-t-il à long terme la surface de terre en forêt et l'âge de coupe? Nous étudions cette question en spécifiant un modèle dynamique d'allocation d'un terrain donné, par un propriétaire forestier privé, entre la forêt et une utilisation alternative du terrain, comme l'agriculture. Une fois les arbres coupés, il décide d'une nouvelle allocation du terrain. Il le fait indéfiniment comme dans le cadre du modèle de Faustmann. Le bois coupé est transformé en produit final qui est en partie recyclé comme substitut du bois original. Ainsi, les outputs passés affectent le prix courant. Nous montrons que, paradoxalement, un accroissement du taux de recyclage réduira à long terme la surface forestière et donc diminuera le nombre d'arbres plantés. Par contre l'âge de coupe optimal va s'accroître. L'effet net sur le volume de bois offert sur le marché est ambigu. Le principal message cependant est qu'à long terme le recyclage va résulter en une surface en forêt plus petite et non plus grande. Donc, si le but est d'accroître la surface en forêt, il pourrait être préférable de faire appel à d'autres types d'instruments de politique que celui d'encourager le recyclage.

Problème inverse de Galois : critère de rigidité

Dans ce mémoire, on étudie les extensions galoisiennes finies de C(x). On y démontre le théorème d'existence de Riemann. Les notions de rigidité faible, rigidité et rationalité y sont développées. On y obtient le critère de rigidité qui permet de réaliser certains groupes comme groupes de Galois sur Q. Plusieurs exemples de types de ramification sont construis.

Modelling, control and supervision for a class of hybrid systems

The aim of this thesis is to narrow the gap between two different control techniques: the continuous control and the discrete event control techniques DES. This gap can be reduced by the study of Hybrid systems, and by interpreting as Hybrid systems the majority of large-scale systems. In particular, when looking deeply into a process, it is often possible to identify interaction between discrete and continuous signals. Hybrid systems are systems that have both continuous, and discrete signals. Continuous signals are generally supposed continuous and differentiable in time, since discrete signals are neither continuous nor differentiable in time due to their abrupt changes in time. Continuous signals often represent the measure of natural physical magnitudes such as temperature, pressure etc. The discrete signals are normally artificial signals, operated by human artefacts as current, voltage, light etc. Typical processes modelled as Hybrid systems are production systems, chemical process, or continuos production when time and continuous measures interacts with the transport, and stock inventory system. Complex systems as manufacturing lines are hybrid in a global sense. They can be decomposed into several subsystems, and their links. Another motivation for the study of Hybrid systems is the tools developed by other research domains. These tools benefit from the use of temporal logic for the analysis of several properties of Hybrid systems model, and use it to design systems and controllers, which satisfies physical or imposed restrictions. This thesis is focused in particular types of systems with discrete and continuous signals in interaction. That can be modelled hard non-linealities, such as hysteresis, jumps in the state, limit cycles, etc. and their possible non-deterministic future behaviour expressed by an interpretable model description. The Hybrid systems treated in this work are systems with several discrete states, always less than thirty states (it can arrive to NP hard problem), and continuous dynamics evolving with expression: with Ki ¡ Rn constant vectors or matrices for X components vector. In several states the continuous evolution can be several of them Ki = 0. In this formulation, the mathematics can express Time invariant linear system. By the use of this expression for a local part, the combination of several local linear models is possible to represent non-linear systems. And with the interaction with discrete events of the system the model can compose non-linear Hybrid systems. Especially multistage processes with high continuous dynamics are well represented by the proposed methodology. Sate vectors with more than two components, as third order models or higher is well approximated by the proposed approximation. Flexible belt transmission, chemical reactions with initial start-up and mobile robots with important friction are several physical systems, which profits from the benefits of proposed methodology (accuracy). The motivation of this thesis is to obtain a solution that can control and drive the Hybrid systems from the origin or starting point to the goal. How to obtain this solution, and which is the best solution in terms of one cost function subject to the physical restrictions and control actions is analysed. Hybrid systems that have several possible states, different ways to drive the system to the goal and different continuous control signals are problems that motivate this research. The requirements of the system on which we work is: a model that can represent the behaviour of the non-linear systems, and that possibilities the prediction of possible future behaviour for the model, in order to apply an supervisor which decides the optimal and secure action to drive the system toward the goal. Specific problems can be determined by the use of this kind of hybrid models are: - The unity of order. - Control the system along a reachable path. - Control the system in a safe path. - Optimise the cost function. - Modularity of control The proposed model solves the specified problems in the switching models problem, the initial condition calculus and the unity of the order models. Continuous and discrete phenomena are represented in Linear hybrid models, defined with defined eighth-tuple parameters to model different types of hybrid phenomena. Applying a transformation over the state vector : for LTI system we obtain from a two-dimensional SS a single parameter, alpha, which still maintains the dynamical information. Combining this parameter with the system output, a complete description of the system is obtained in a form of a graph in polar representation. Using Tagaki-Sugeno type III is a fuzzy model which include linear time invariant LTI models for each local model, the fuzzyfication of different LTI local model gives as a result a non-linear time invariant model. In our case the output and the alpha measure govern the membership function. Hybrid systems control is a huge task, the processes need to be guided from the Starting point to the desired End point, passing a through of different specific states and points in the trajectory. The system can be structured in different levels of abstraction and the control in three layers for the Hybrid systems from planning the process to produce the actions, these are the planning, the process and control layer. In this case the algorithms will be applied to robotics ¡V a domain where improvements are well accepted ¡V it is expected to find a simple repetitive processes for which the extra effort in complexity can be compensated by some cost reductions. It may be also interesting to implement some control optimisation to processes such as fuel injection, DC-DC converters etc. In order to apply the RW theory of discrete event systems on a Hybrid system, we must abstract the continuous signals and to project the events generated for these signals, to obtain new sets of observable and controllable events. Ramadge & Wonham¡¦s theory along with the TCT software give a Controllable Sublanguage of the legal language generated for a Discrete Event System (DES). Continuous abstraction transforms predicates over continuous variables into controllable or uncontrollable events, and modifies the set of uncontrollable, controllable observable and unobservable events. Continuous signals produce into the system virtual events, when this crosses the bound limits. If this event is deterministic, they can be projected. It is necessary to determine the controllability of this event, in order to assign this to the corresponding set, , controllable, uncontrollable, observable and unobservable set of events. Find optimal trajectories in order to minimise some cost function is the goal of the modelling procedure. Mathematical model for the system allows the user to apply mathematical techniques over this expression. These possibilities are, to minimise a specific cost function, to obtain optimal controllers and to approximate a specific trajectory. The combination of the Dynamic Programming with Bellman Principle of optimality, give us the procedure to solve the minimum time trajectory for Hybrid systems. The problem is greater when there exists interaction between adjacent states. In Hybrid systems the problem is to determine the partial set points to be applied at the local models. Optimal controller can be implemented in each local model in order to assure the minimisation of the local costs. The solution of this problem needs to give us the trajectory to follow the system. Trajectory marked by a set of set points to force the system to passing over them. Several ways are possible to drive the system from the Starting point Xi to the End point Xf. Different ways are interesting in: dynamic sense, minimum states, approximation at set points, etc. These ways need to be safe and viable and RchW. And only one of them must to be applied, normally the best, which minimises the proposed cost function. A Reachable Way, this means the controllable way and safe, will be evaluated in order to obtain which one minimises the cost function. Contribution of this work is a complete framework to work with the majority Hybrid systems, the procedures to model, control and supervise are defined and explained and its use is demonstrated. Also explained is the procedure to model the systems to be analysed for automatic verification. Great improvements were obtained by using this methodology in comparison to using other piecewise linear approximations. It is demonstrated in particular cases this methodology can provide best approximation. The most important contribution of this work, is the Alpha approximation for non-linear systems with high dynamics While this kind of process is not typical, but in this case the Alpha approximation is the best linear approximation to use, and give a compact representation.

Neural network based control in food processing

A number of commonly encountered simple neural network types are discussed, with particular attention being paid to their applicability in automation and control when applied to food processing. In the first instance n-tuple networks are considered, these being particularly useful for high speed production checking operations. Subsequently backpropagation networks are discussed, these being useful both in a more familiar feedback control arrangement and also for such things as recipe prediction.

Influence of shape and absorbing surface: a numerical study of railway noise barriers

Results are presented of a study of a performance of various track-side railway noise barriers, determined by using a two- dimensional numerical boundary element model. The basic model uses monopole sources and has been adapted to allow the sources to exhibit dipole-type radiation characteristics. A comparison of boundary element predictions of the performance of simple barriers and vehicle shapes is made with results obtained by using the standard U.K. prediction method. The results obtained from the numerical model indicate that modifying the source to exhibit dipole characteristics becomes more significant as the height of the barrier increases, and suggest that for any particular shape, absorbent barriers provide much better screening efficiency than the rigid equivalent. The cross-section of the rolling stock significantly affects the performance of rigid barriers. If the position of the upper edge is fixed, the results suggest that simple absorptive barriers provide more effective screening than tilted barriers. The addition of multiple edges to a barrier provides additional insertion loss without any increase in barrier height.

The capability-affordance model: a method for analysis and modelling of capabilities and affordances

Existing capability models lack qualitative and quantitative means to compare business capabilities. This paper extends previous work and uses affordance theories to consistently model and analyse capabilities. We use the concept of objective and subjective affordances to model capability as a tuple of a set of resource affordance system mechanisms and action paths, dependent on one or more critical affordance factors. We identify an affordance chain of subjective affordances by which affordances work together to enable an action and an affordance path that links action affordances to create a capability system. We define the mechanism and path underlying capability. We show how affordance modelling notation, AMN, can represent affordances comprising a capability. We propose a method to quantitatively and qualitatively compare capabilities using efficiency, effectiveness and quality metrics. The method is demonstrated by a medical example comparing the capability of syringe and needless anaesthetic systems.

Towards a maximal extension of Pelczynski`s decomposition method in Banach spaces

l Suppose that X, Y. A and B are Banach spaces such that X is isomorphic to Y E) A and Y is isomorphic to X circle plus B. Are X and Y necessarily isomorphic? In this generality. the answer is no, as proved by W.T. Cowers in 1996. In the present paper, we provide a very simple necessary and sufficient condition on the 10-tuples (k, l, m, n. p, q, r, s, u, v) in N with p+q+u >= 3, r+s+v >= 3, uv >= 1, (p,q)$(0,0), (r,s)not equal(0,0) and u=1 or v=1 or (p. q) = (1, 0) or (r, s) = (0, 1), which guarantees that X is isomorphic to Y whenever these Banach spaces satisfy X(u) similar to X(p)circle plus Y(q), Y(u) similar to X(r)circle plus Y(s), and A(k) circle plus B(l) similar to A(m) circle plus B(n). Namely, delta = +/- 1 or lozenge not equal 0, gcd(lozenge, delta (p + q - u)) divides p + q - u and gcd(lozenge, delta(r + s - v)) divides r + s - v, where 3 = k - I - in + n is the characteristic number of the 4-tuple (k, l, m, n) and lozenge = (p - u)(s - v) - rq is the discriminant of the 6-tuple (p, q, r, s, U, v). We conjecture that this result is in some sense a maximal extension of the classical Pelczynski`s decomposition method in Banach spaces: the case (1, 0. 1, 0, 2. 0, 0, 2. 1. 1). (C) 2009 Elsevier Inc. All rights reserved.

Experimentell studie på kostnadseffektiva inkjetbestrykningspigment

The objective of this study was to evaluate and compare the print performance of some of the new most promising, cost effective absorbent pigments specialised for inkjet coatings on the market in a continuous drive to find an alternative to silica. The target was a lower production cost for ArjoWiggins inkjet products, OMD 01 and OMD 02. Five absorbent pigments are being evaluated through measuring the qualities of the coating mix itself, visual evaluations of print performance and physical testing of the coated paper. Pigments 1,2 and 3, which all are said to be tailored for inkjet coatings, did not reach the print performance needed for an OMD 01 and OMD 02 equal, due to severe bleed and feathering identified especially on the Epson 950 printer. They are therefore currently not seen as viable formulations. A blend of 50% pigment 5 and 50% silica had excellent print performance as OMD 01 and OMD 02 equivalents and is therefore recommended as a potential alternative to 100% silica. It is of the company’s interest to find a more cost effective solution to their inkjet coatings, and a 50/50 blend of Pigment 5 will save the company more than 35 000 euro per year.

An Upgrade of Network Traffic Recognition System for SIP/VoIP Traffic Recognition

The purpose of this project is to update the tool of Network Traffic Recognition System (NTRS) which is proprietary software of Ericsson AB and Tsinghua University, and to implement the updated tool to finish SIP/VoIP traffic recognition. Basing on the original NTRS, I analyze the traffic recognition principal of NTRS, and redesign the structure and module of the tool according to characteristics of SIP/VoIP traffic, and then finally I program to achieve the upgrade. After the final test with our SIP data trace files in the updated system, a satisfactory result is derived. The result presents that our updated system holds a rate of recognition on a confident level in the SIP session recognition as well as the VoIP call recognition. In the comparison with the software of Wireshark, our updated system has a result which is extremely close to Wireshark’s output, and the working time is much less than Wireshark. In the aspect of practicability, the memory overflow problem is avoided, and the updated system can output the specific information of SIP/VoIP traffic recognition, such as SIP type, SIP state, VoIP state, etc. The upgrade fulfills the demand of this project.

Manejo hídrico em viveiro e uso de hidrogel na sobrevivência pós-plantio de Eucalyptus urograndis em dois solos diferentes

O trabalho teve como objetivo avaliar a sobrevivência do clone H13 de Eucalyptus urograndis sob dois manejos hídricos de viveiro, plantados em dois solos, com e sem a adição de polímero hidroabsorvente (hidrogel). O plantio foi realizado em vasos mantidos em estufa, com dois tipos de solo: um arenoso e outro argiloso. Cada vaso recebeu 2,5 L de solo, um litro de água e o hidrogel na proporção de 0,4 g vaso-1 (120 mL de gel). O delineamento experimental adotado foi o inteiramente casualizado, com três repetições. Os sintomas de estresse, nos vários níveis avaliados, sempre se manifestaram primeiro nas plantas no solo argiloso, de modo mais acentuado naquelas que foram mantidas sem estresse de água na fase de viveiro. Isso garantiu que as plantas sobrevivessem por um período menor sem água, variando de 14 a 20 dias (com e sem hidrogel, respectivamente), enquanto, no solo arenoso, a sobrevivência foi maior, de 29 a 34 dias (com e sem hidrogel, respectivamente). Apesar da não significância estatística, os resultados com o hidrogel possibilitam, em ambos os solos, maior flexibilidade operacional na intervenção com novas irrigações.

Remoção de hidrocarbonetos do gás natural visando o ajuste do índice de metano

The use of the natural gas is growing year after year in the whole world and also in Brazil. It is verified that in the last five years the profile of natural gas consumption reached a great advance and investments had been carried through in this area. In the oil industry, the use of the natural gas for fuel in the drive of engines is usual for a long date. It is also used to put into motion equipment, or still, to generate electric power. Such engines are based on the motor cycle of combustion Otto, who requires a natural gas with well definite specification, conferring characteristic anti-detonating necessary to the equipment performance for projects based on this cycle. In this work, process routes and thermodynamic conditions had been selected and evaluated. Based on simulation assays carried out in commercial simulators the content of the methane index of the effluent gas were evaluated at various ranges of pressure, temperature, flowrate, molecular weight and chemical nature and composition of the absorbent. As final result, it was established a route based on process efficiency, optimized consumption of energy and absorbent. Thereby, it serves as base for the compact equipment conception to be used in locu into the industry for the removal of hydrocarbon from the natural gas produced

Calcium Hydroxide Mixed With Camphoric p-Monochlorophenol or Chlorhexidine in Delayed Tooth Replantation

This study evaluated the repair process after delayed replantation of rat teeth, using calcium hydroxide (Ca(OH)(2)) mixed with camphorated p-monochlorophenol (CMCP), chlorhexidine 2% (CHX), or saline as temporary root canal dressing to prevent and/or control inflammatory radicular resorption. Thirty Wistar rats (Rattus norvegicus albinos) had their right upper incisor extracted, which was bench-dried for 60 minutes. The dental papilla, the enamel organ, the dental pulp, and the periodontal ligament were removed. The teeth were immersed in 2% acidulated-phosphate sodium fluoride solution for 10 minutes. The root canals were dried with absorbent paper cones and divided into 3 groups of 10 animals according to root canal dressing used: group 1: Ca(OH)(2) + saline, group 2: Ca(OH)(2) + CMCP, and group 3: Ca(OH)(2) + CHX 2%. Before replanting, the teeth sockets were irrigated with saline. Histological analysis revealed the presence of inflammatory resorption, replacement resorption, and ankylosis in all 3 groups. Statistical analysis showed a significant difference between group 3 and the other groups. The use of Ca(OH)(2) mixed with CMCP or CHX did not show an advantage over the use of Ca(OH)(2) mixed with saline in preventing and/or controlling inflammatory resorption in delayed replantation of rat teeth.

Analysis of the healing process in delayed tooth replantation after root canal filling with calcium hydroxide, Sealapex and Endofill: a microscopic study in rats

The major concern in the therapeutics of tooth replantation refers to the occurrence of root resorption and different approaches have been proposed to prevent or treat these complications. The purpose of this study was to evaluate tissue response to delayed replantation of anterior rat teeth treated endodontically using calcium hydroxide, Sealapex, and Endofill without the placement of gutta-percha cones. Thirty rats had their right upper incisor extracted and maintained in dry storage for 60 min. After removal of the dental papilla, enamel organ, pulp tissue, and periodontal ligament remnants, the teeth were immersed in 2% sodium fluoride phosphate acidulated, pH 5.5, for 10 min. The root canals were dried with absorbent paper points and the teeth were assigned to three groups (n = 10) according to the filling material. Group I - calcium hydroxide and propyleneglycol paste, Group II - Sealapex, and Group III - Endofill. The sockets were irrigated with saline and the teeth were replanted. Replacement resorption, inflammatory resorption and ankylosis were observed in all groups. Although the occurrence of inflammatory resorption was less frequent in Group I, there were no statistically significant differences among the groups. It may be concluded that compared to the paste, filling the root canals with Sealapex and Endofill sealers without the placement of gutta-percha cones did not provide better results.

Uso de hidrogel na sobrevivência de mudas de Eucalyptus urograndis produzidas com diferentes substratos e manejos hídricos

This study aimed to evaluate the use of hydrogel in the survival of cuttings of Eucalyptus urograndis produced with different types of substrate and water management. The experiment was carried out using cuttings of the same clone, produced up to 50 days after the cutting, in two different nurseries ("C" and "E"). Then, all the cuttings were allocated to the same nursery for 80 days, where they received irrigation at different frequencies. After this period, the cuttings were transplanted into polyethylene pots, in clay soil, with and without hydrogel. The results obtained were subjected to the variance technique for totally randomized experiments. Data analysis revealed that the plants with hydrogel displayed delayed symptoms of water deficit. Regardless of the cutting's origin ("C" or "E"), the hydrogel influenced survival, guaranteeing 37 days without additional irrigation. The nursery water management only influenced the plants from nursery "E", and the plants adapted to the lack of water (water management with one daily irrigation) took more time to present symptoms of water deficit.