Genetic variation for anatomic traits and volume shrinkage and their correlation with wood basic density in an Eucalyptus camaldulensis Dehn base population

Eucalyptus camaldulensis has great importance in Brazil because of their phenotypic plasticity for different environmental conditions, as soils, altitudes and rainfall. This study is an investigation of a base population of E. camaldulensis from Australia through a progeny test implanted in Selviria, MS. The trial was established in a randomized block design, with 25 families and 60 replications of single tree plots. Genetic parameters for anatomic traits and volume shrinkage were estimated, as well as their correlations with wood basic density. No significant differences among progenies were observed for the traits studied. The additive genetic variation coefficient at individual and among progeny levels ranged from low (0.26%) to high (16.98%). The narrow sense heritability at individual and family means levels also ranged from low (0.01) to high (0.87). This indicates that some traits are under strong genetic control and can be improved by selection. In the present situation, in order to attain the highest genetic gains, the sequential selection among and within progeny would be recommended.

PYROLIGNEOUS LIQUOR PRODUCED FROM ACACIA MEARNSII DE WILD WOOD UNDER CONTROLLED CONDITIONS AS A RENEWABLE SOURCE OF CHEMICALS

Acacia mearnsii de Wild (black wattle) is one of the most important trees planted in Southern Brazil for tannin extraction and charcoal production. The pyrolysis of the black wattle wood used for obtaining charcoal is performed in brick ovens, with the gas fraction being sent directly into the environment. The present study examines the condensable compounds present in the liquor produced from black wattle wood at different thermal degradation conditions, using gas chromatography coupled with mass spectrometry (GC/MS). Branches of black wattle were thermally degraded at controlled ambient and temperature conditions. Overall, a higher variety of compounds were obtained under atmospheric air pressure than under synthetic air pressure. Most of the tentatively identified compounds, such as carboxylic acids, phenols, aldehydes, and low molecular mass lignin fragments, such as guayacol, syringol, and eugenol, were products of lignin thermoconversion. Substituted aromatic compounds, such as vanillin, ethyl vanillin, and 2-methoxy-4-propeny-phenol, were also identified. At temperatures above 200 ºC, furan, 2-acetylfuran, methyl-2-furoate, and furfural, amongst others, were identified as polysaccharide derivatives from cellulose and hemicellulose depolymerization. This study evidences the need for adequate management of the condensable by-products of charcoal production, both for economic reasons and for controlling their potential environmental impact.

Extractives and energetic properties of wood and charcoal

Charcoal production stands out as a raw material for the production of renewable energy. To assess wood quality in energy terms, studies have focused more on the holocellulose and lignin content than on the role of extractives. The objective of this study was to evaluate the relationship between the extractive content in cold water, in dichloromethane and total on energy properties of wood and charcoal, from six trees species. The extractives were removed with different solvents to be recorded and gross calorific value of wood was determined. The wood was carbonized at 1.67°C/min heating rate until maximum of 450°C and residence time of 30 min. The extractive content was correlated with the gravimetric yield, apparent relative density, ash, volatile matter, fixed carbon and gross calorific value of charcoal. The removal of total extractives and extractives soluble in dichloromethane reduced the gross calorific value of wood of most species evaluated. The extractives removed in cold water did not correlate with the parameters of carbonization. The extractives content in dichloromethane correlated with volatile matter, fixed carbon and gross calorific value. Total extractive content correlated with gravimetric yield, apparent relative density and gross calorific value of charcoal.

Danos de Ochetina uniformis (Pascoe, 1881) (Coleoptera, Erirhinidae, Erirhininae), sob diferentes níveis populacionais, na cultura de arroz irrigado (Oryza sativa L.)

O gorgulho Ochetina un!/Órmis é o principal inseto praga surgido nos últimos anos em arroz irrigado, no sul do Brasil, devido às perdas que causa à produtividade da cultura. Com o objetivo de investigar os danos do inseto na cultura de arroz irrigado, sob diferentes níveis~. populacionais de infestação, foi conduzido ensaio em campo experimental, na safra 2002/03. Para isso utilizou-se seis tratamentos: O, 2, 6, 12, 24 e 32 adultos/O,R 01:\ em delineamento de blocos casualizados com 4 repetições. O sistema de irrigação e drenagem foi individualizado. A cultivar IRGA 417, de ciclo curto. foi semeada com densidade de 80 sementes/mo Um desbaste foi feito aos 19 dias após a semeadura, permanecendo 200 plantas de tamanho uniforme, por unidade experimentaL A infestação foi realizada aos sete dias após o estabelecimento da lâmina de água, que correspondeu a 32 dias após a semeadura. As variáveis avaliadas foram número de folhas perfuràdas, ma.,<;saseca de folhas, estatura de plantas, número de panículas/m, número de grãoslpanícula, peso de mil grãos, esterilidade de grãos e produtividade de grãos. Observou-se redução da estatura e acamamento de plantas. A cada inseto/O)~ m2 estimou-se redução de 0,441 panículaslm, de 0,456 grãos/panícula e de produtividade equivaJente a 83,567 kglha. O percentual de redução da produtividade foi de I,OR% a cada inseto/1112.

Pesquisas sobre a febre amarela (1881-1903): uma reflexão visando contribuir para o ensino de ciências

O presente artigo focaliza episódios históricos relacionados à pesquisa médica acerca da febre amarela (1881-1903), buscando discutir (a) a influência que os fatores econômicos, sociais e políticos exercem sobre a pesquisa científica; (b) o caráter coletivo, controvertido e não-linear do processo de produção de conhecimentos na ciência; (c) a natureza arbitrária dos conhecimentos científicos, no sentido de que representam formas de ver, e não são perenes ou elaborados apenas sobre bases racionais; (d) o papel pouco cabal desempenhado pelas demonstrações experimentais, que não se mostram irrefutáveis; e (e) o papel desempenhado pelos paradigmas, que conduzem não apenas a caminhos frutíferos, mas também a becos sem saída. O intuito é proporcionar subsídios que sejam úteis tanto aos pesquisadores como aos professores que atuam na área do Ensino de Ciências.

Influence of belt speed, grit sizes and pressure on the sanding of Eucalyptus grandis wood

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effects of belt speed, pressure and grit size on the sanding of pinus elliottii wood

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

EFFECT OF THERMAL TREATMENT ON THE CHEMICAL CHARACTERISTICS OF WOOD FROM Eucalyptus grandis W. Hill ex Maiden UNDER DIFFERENT ATMOSPHERIC CONDITIONS

Thermal treatment (thermal rectification) is a process in which technological properties of wood are modified using thermal energy, the result of Which is often value-added wood. Thermally treated wood takes on similar color shades to tropical woods and offers considerable resistance to destructive microorganisms and climate action, in addition to having high dimensional stability and low hygroscopicity. Wood samples of Eucalyptus grandis were subjected to various thermal treatments, as performed in presence (140 degrees C; 160 degrees C; 180 degrees C) or in absence of oxygen (160 degrees C; 180 degrees C; 200 degrees C) inside a thermal treatment chamber, and then studied as to their chemical characteristics. Increasing the maximum treatment temperatures led to a reduction in the holocellulose content of samples as a result of the degradation and volatilization of hemicelluloses, also leading to an increase in the relative lignin content. Except for glucose, all monosaccharide levels were found to decrease in samples after the thermal treatment at a maximum temperature of 200 degrees C. The thermal treatment above 160 degrees C led to increased levels of total extractives in the wood samples, probably ascribed to the emergence of low molecular weight substances as a result of thermal degradation. Overall, it was not possible to clearly determine the effect of presence or absence of oxygen in the air during thermal treatment on the chemical characteristics of the relevant wood samples.

Effect of thermal treatment on the chemical characteristics of wood from Eucalyptus grandis W. Hill ex Maiden under different atmospheric conditions

Thermal treatment (thermal rectification) is a process in which technological properties of wood are modified using thermal energy, the result of which is often value-added wood. Thermally treated wood takes on similar color shades to tropical woods and offers considerable resistance to destructive microorganisms and climate action, in addition to having high dimensional stability and low hygroscopicity. Wood samples of Eucalyptus grandis were subjected to various thermal treatments, as performed in presence (140ºC; 160ºC; 180ºC) or in absence of oxygen (160ºC; 180ºC; 200ºC) inside a thermal treatment chamber, and then studied as to their chemical characteristics. Increasing the maximum treatment temperatures led to a reduction in the holocellulose content of samples as a result of the degradation and volatilization of hemicelluloses, also leading to an increase in the relative lignin content. Except for glucose, all monosaccharide levels were found to decrease in samples after the thermal treatment at a maximum temperature of 200ºC. The thermal treatment above 160ºC led to increased levels of total extractives in the wood samples, probably ascribed to the emergence of low molecular weight substances as a result of thermal degradation. Overall, it was not possible to clearly determine the effect of presence or absence of oxygen in the air during thermal treatment on the chemical characteristics of the relevant wood samples.

Holocene distribution of woody taxa at the westernmost limit of the Circumboreal/Mediterranean boundary: evidence from wood remains

Información paleoecológica relativa a la distribución de táxones arbóreos durante el holoceno, basado en restos fósiles leñosos.

Harvard College quarter bills, 1812-1818

This folder contains sixteen printed Harvard College quarter bills filled out in manuscript primarily for William Croswell's use of wood.

A software tool for accurate assessment of costs and CO2 emissions in wood transport using OpenStreetMap©

Costs and environmental impacts are key elements in forest logistics and they must be integrated in forest decision-making. The evaluation of transportation fuel costs and carbon emissions depend on spatial and non-spatial data but in many cases the former type of data are dicult to obtain. On the other hand, the availability of software tools to evaluate transportation fuel consumption as well as costs and emissions of carbon dioxide is limited. We developed a software tool that combines two empirically validated models of truck transportation using Digital Elevation Model (DEM) data and an open spatial data tool, specically OpenStreetMap©. The tool generates tabular data and spatial outputs (maps) with information regarding fuel consumption, cost and CO2 emissions for four types of trucks. It also generates maps of the distribution of transport performance indicators (relation between beeline and real road distances). These outputs can be easily included in forest decision-making support systems. Finally, in this work we applied the tool in a particular case of forest logistics in north-eastern Portugal

Discursos leídos ante la Academia de Nobles Artes de San Fernando en la recepción pública de Don Nicolás Gato de Lema /

Mode of access: Internet.

Mrs. Wood's novels /

Includes various editions.

American art and American art collections; essays on artistic subjects by the best art writers, fully illustrated with etchings, photo-etchings, photogravures, phototypes, and engravings on steel and wood, by the most celebrated artists;

"Linton's History of wood engraving in America": v.1, p. 401-528.