Estudio de laboratorio del efecto de las concentraciones de calcio y caseína, el pH y la temperatura sobre la incorporación de proteínas lácteas al coágulo obtenido por acción enzimática

The effect of casein concentration, Ca2+ concentration, temperature and pH on the amount and size of protein aggregates (fines) in the whey produced by enzimic coagulation of nonfat milk was studied in laboratory conditions. Casein concentrations about 0.3 g/L showed a minimal amount of caseins in the whey, with presence of small aggregates of casein micellles. Ca2+ concentrations higher than 5 mM were neccesary to reduce the whey protein to a minimum constituted by protein particles smaller than casein micelles. The coagulation temperature, in the 35 - 45oC range, produced almost no variations in the whey proteins. The obtention of a minimum amount of whey proteins was possible only in a narrow pH range around 6.4. These results pointed to casein concentration and pH as important variables to be controlled in connection with the process yield.

Utilização de resíduos agroindustriais para a produção de proteases pelo termofílico Bacillus sp em fermentação submersa: otimização do meio de cultura usando a técnica de planejamento experimental

Thermophilic Bacillus sp. SMIA-2, produced protease when grown on apple pectic, whey protein and corn step liquor medium, whose concentration was varied from 3 to 10 gL-1, according to the central composite design 2³. The experiments were conducted in shaker, at 50 °C, 150 rpm and initial pH 6.5. The results revealed that the culture medium affected both, cell growth and enzyme production. After graphical and numerical optimization procedure, the enzyme production reached its maximum value at 30 h fermentation, reaching, approximately, 70 U protein mg-1, suggesting that this process was partially associated to the growth.

Adsorção de alfa-lactalbumina do soro de leite em hidroxiapatita: efeito do pH e da temperatura e análise termodinâmica

The nutritional and functional benefits offered by whey protein α-lactalbumin justify the great interest in its manufacture in large quantities at a high purity level. Hydroxyapatite is a calcium phosphate material able to adsorb proteins and can be synthesized at low production cost. Therefore, this work evaluated the adsorption of α-lactalbumin on hydroxyapatite using solid-liquid phase equilibrium data reported as adsorption isotherms. Van't Hoff's thermodynamics analysis showed that the adsorption process is entropically driven.

NANOPARTÍCULAS DE PROTEÍNA ISOLADA DE SOJA EM ÁGUA: EFEITO DA FORÇA IÔNICA E DAS CONCENTRAÇÕES DE PROTEÍNA E SURFACTANTE

Soft nanoparticles of size 200-400 nm were obtained from soybean protein isolate (SPI). The particles were formed and suspended in water by the coacervation of aqueous suspensions of SPI in hostile buffered aqueous solutions in the presence of surfactants. We investigate the effect of storage, ionic strength, and concentrations of SPI and surfactant on nanoparticle size and zeta potential. Transmission electron microscopy images and scattering techniques (SLS/ DLS) revealed that the particles are spherical, with hydrophilic chains at the surface.

Processing of Brazil-nut flour: characterization, thermal and morphological analysis

The Brazil nut (Bertholletia excelsea H. B. K.) is noteworthy for its high content of lipids and proteins of elevated biological value and these factors justify the need for further research and incentives for the manufacturing of new trade products. In the present study we sought new forms of technological use of these nuts by the food industry, through their processing as flour, with no alteration in its energy content. The results after its elaboration showed a product with high energy value (431.48 kcal.100 g-1), protein content of 45.92 g.100 g-1, and fiber of 17.14%. The thermal analyses indicate that the introduction of another protein component, such as soy protein isolate, does not alter the reactions or thermal behavior. On the other hand, morphological analyses revealed granular structures similar to the structure of globular proteins. It was observed that after processing to obtain the flour, the product maintains its protein-energy content, as well as its characteristics when subjected to high temperatures.

Soursop juice stabilized with soy fractions: a rheologial approach

The potential use of soybean soluble polysaccharide (SSPS) as a stabilizer in acidic beverages was evaluated using rheological and stability studies. For this purpose, soy-based beverages were formulated with soy protein isolate (SPI) and soursop juice due to the low stability of this kind of dispersion. The influences of the concentrations of soybean soluble polysaccharide, calcium chloride, and soy protein isolate on the stability and rheology of soursop juice were evaluated using a factorial experimental design. Interactions between the concentrations of soybean soluble polysaccharide and soy protein isolate exerted a positive effect on the maximum Newtonian viscosity. The stability was positively influenced by the soybean soluble polysaccharide and soy protein isolate concentrations, but the interactions between soy protein isolate and CaCl2 also affected the sedimentation index. These results suggest that soybean soluble polysaccharide is effective in stabilizing fibers and proteins in acidic suspensions due to the increase in viscosity and steric effect caused by the formation of complexes between the soybean soluble polysaccharide and soy protein isolate.

Quality of royal jelly produced by Africanized honeybees fed a supplemented diet

This study was carried out to evaluate the effect of artificial supplements prepared with soybean protein isolate, brewer's yeast, mixture of soybean protein isolate with brewer's yeast, linseed oil, palm oil, and a mixture of linseed oil with palm oil on the physicochemical and microbiological composition of royal jelly produced by Africanized honey bee colonies. Considering these results, providing supplements for Africanized honeybee colonies subjected to royal jelly production can help and strengthen the technological development of the Brazilian beekeeping industry increasing its consumption in the national market. This research presents values of royal jelly a little different from those established by the Brazilian legislation. This fact shows that is important to discuss or change the official method for royal jelly analysis. The characterization of physicochemical and microbiological parameters is important in order to standardize fresh, frozen, and lyophilized royal jelly produced by Africanized honeybees.

Peptide separation of commercial fermented milk during refrigerated storage

Milk is an important source of bioactive compounds. Many of these compounds are released during fermentation and refrigerated storage. The aim of this study was to determine the release of peptides by lactic acid bacteria in commercial fermented milk during refrigerated storage. The size and profile of peptides were analyzed by polyacrylamide gel electrophoresis and sizeexclusion HPLC. During electrophoresis, it was observed that the peptides were released from caseins, whereas β-lactoglobulin was the whey protein with the highest degradation. HPLC analysis confirmed the pattern of peptide formation observed in electrophoresis. Two fractions lower than 2 kDa with aromatic amino acids in their structure were separated. These results were consistent with those reported for structures of peptides with antihypertensive activity. Therefore, the presence of aromatic amino acids in the peptide fractions obtained increases the likelihood of finding peptides with such activity in refrigerated commercial fermented milk. In conclusion, during cold storage, peptides with different molecular weights are released and accumulated. This could be due to the action of proteinases and peptidases of the proteolytic system in lactic acid bacteria.

Evaluación de tecnologías sanitarias aplicada a la selección de un módulo de proteína para uso hospitalario

Introducción: La evaluación de tecnologías en salud aplicadas a la selección de un módulo de proteína para uso hospitalario, tiene como finalidad servir de apoyo en la elección de productos costo efectivos y seguros, con el fin de favorecer la toma de decisiones a los diferentes agentes que participan en la elección de alternativas terapéuticas, recomendadas en pacientes con necesidades elevadas de proteínas, como es el caso de la presente investigación. Objetivo: Aplicar un método matemático - multicriterio que permita evaluar los módulos de proteína disponibles en el mercado para la terapia nutricional institucional. Métodos: Se establecieron dos fases, una revisión de la literatura para establecer y priorizar los criterios de evaluación técnica de las diferentes ofertas de módulos de proteína, y dos se realizó una aplicación de un modelo matemático con el fin de considerar el modulo proteico para uso dentro de las instituciones hospitalarias, el cual consistió en la asignación de un valor a cada una de las variables mediante una escala diferencial semántica establecida, que permitieron calcular el peso porcentual de cada una de las variables, cuya sumatoria arrojo la calificación porcentual de cada alternativa. Resultados: Respecto a la búsqueda de criterios de evaluación técnica para las diferentes ofertas de módulos de proteína, en la literatura se identificaron las siguientes variables para evaluación, la naturaleza o equivalencia, condiciones de administración y uso, seguridad, y eficacia. La naturaleza se evaluó mediante la calificación del cómputo químico de aminoácidos corregido por digestibilidad proteica (PDCAAS) con un peso en la evaluación del 39.05%, en referencia a las condiciones de administración y uso se tuvo en cuenta factores incluidos en los sistemas de distribución por dosis unitaria con un peso del 27.61%, la eficacia fue definida por la tasa de eficiencia proteica (PER) la cual impacta el 19.53% de la calificación y finalmente, el criterio de seguridad con un 13.81% referente al empaque y etiquetado. Conclusiones: Al realizar la evaluación de cuatro alternativas de módulos de proteína, ofertadas por las diferentes casas farmacéuticas, la mayor puntuación correspondiente a las alternativas con una calificación superior al 90%, la obtuvieron dos alternativas de módulos de proteína para uso hospitalario, las cuales contienen proteínas del suero (“Whey”) y aminoácidos en combinaciones.

Isolation of lactoperoxidase using different cation exchange resins by batch and column procedures

Lactoperoxidase (LP) was isolated from whey protein by cation-exchange using Carboxymethyl resin (CM-25C) and Sulphopropyl Toyopearl resin (SP-650C). Both batch and column procedures were employed and the adsorption capacities and extraction efficiencies were compared. The resin bed volume to whey volume ratios were 0.96:1.0 for CM-25C and ≤ 0.64:1.0 for SP-650 indicating higher adsorption capacity of SP-650 compared to CM-25C. The effluent LP activity depended on both the enzyme activity in the whey and the amount of whey loaded on the column within the saturation limits of the resin. The percentage recovery was high below the saturation point and fell off rapidly with over-saturation. While effective recovery was achieved with column extraction procedures, the recovery was poor in batch procedures. The whey-resin contact time had little impact on the enzyme adsorption. SDS PAGE and HPLC analyses were also carried out, the purity was examined and the proteins characterised in terms of molecular weights. Reversed phase HPLC provided clear distinction of the LP and lactoferrin (LF) peaks. The enzyme purity was higher in column effluents compared to batch effluents, judged on the basis of the clarity of the gel bands and the resolved peaks in HPLC chromatograms.

Effects of fat on the properties of halloumi cheese

Halloumi cheese was produced from 11 bovine milks with fat contents of 1.61-4.04%, giving a range of 32-53% fat in dry matter (FDM) in the cheeses. Starter culture and/or microparticulated whey protein (Simplesse((R)) 100(E)) was also added to selected batches of milk. Hardness decreased with increasing FDM, with increase in moisture and with lower pH. On sensory evaluation, there was an increase in preference score with FDM (R-2 = 0.8). Inclusion of microparticulated whey protein may have had a fat mimetic effect, as preference scores otherwise decreased with increasing protein levels (R-2 = 0.75).

Factors affecting lactoperoxidase activity

The extent to which lactoperoxidase (LP) activity was affected while varying the concentration of various compounds normally present in the reaction medium was investigated. LP activity increased with increasing concentrations of 2,2'-azino-bis-3-ethylbenz-thiazoline-6-sulphonic acid (ABTS) but decreased with increasing thiocyanate concentrations. Maximum activity was at 0.1 mm for peroxide. Activity increased in the presence of lactose, whey protein concentrate, sodium, magnesium and calcium chlorides, but decreased in the presence of casein. Activity was similar in either acetate or phosphate buffers but higher in either citrate or succinate buffers. These compounds influence LP activity and should be considered when optimum activity conditions are being established.

A novel technique for differentiation of proteins in the development of acid gel structure from control and heat treated milk using confocal scanning laser microscopy

The incorporation of caseins and whey proteins into acid gels produced from unheated and heat treated skimmed milk was studied by confocal scanning laser microscopy (CSLM) using fluorescent labelled proteins. Bovine casein micelles were labelled using Alexa Fluor 594, while whey proteins were labelled using Alexa Fluor 488. Samples of the labelled protein solutions were introduced into aliquots of pasteurised skim milk, and skim milk heated to 90 degrees C for 2 min and 95 degrees C for 8 min. The milk was acidified at 40 degrees C to a final pH of 4.4 using 20 g gluconodelta-lactone/l (GDL). The formation of gels was observed with CSLM at two wavelengths (488 nm and 594 nm), and also by visual and rheological methods. In the control milk, as pH decreased distinct casein aggregates appeared, and as further pH reduction occurred, the whey proteins could be seen to coat the casein aggregates. With the heated milks, the gel structure was formed of continuous strands consisting of both casein and whey protein. The formation of the gel network was correlated with an increase in the elastic modulus for all three treatments, in relation to the severity of heat treatment. This model system allows the separate observation of the caseins and whey proteins, and the study of the interactions between the two protein fractions during the formation of the acid gel structure, on a real-time basis. The system could therefore be a valuable tool in the study of structure formation in yoghurt and other dairy protein systems.

Associations between dairy consumption and body weight: a review of the evidence and underlying mechanisms

As the incidence of obesity is reaching 'epidemic' proportions, there is currently widespread interest in the impact of dietary components on body-weight and food intake regulation. The majority of data available from both epidemiological and intervention studies provide evidence of a negative but modest association between milk and dairy product consumption and BMI and other measures of adiposity, with indications that higher intakes result in increased weight loss and lean tissue maintenance during energy restriction. The purported physiological and molecular mechanisms underlying the impact of dairy constituents on adiposity are incompletely understood but may include effects on lipolysis, lipogeneis and fatty acid absorption. Furthermore, accumulating evidence indicates an impact of dairy constituents, in particular whey protein derivatives, on appetite regulation and food intake. The present review summarises available data and provides an insight into the likely contribution of dairy foods to strategies aimed at appetite regulation, weight loss or the prevention of weight gain.

Mozzarella-type curd made from buffalo, cows’ and ultrafiltered cows’ milk. 2. Physicochemical properties, curd yield and quality, casein fractions & micelles size

Buffalo milk contains (40–60 %) more protein, fat and calcium than cows’ milk. These constituents were enhanced by ultrafiltration (UF) of cows’ milk to give a product with similar levels to those found in the buffalo milk. Mozzarella-type curd was made from buffalo, cows’ and UF cows’ milk to compare the overall curd yield and quality. The curd yield on both dry and wet weight basis, curd moisture content and overall curd fat retention were found to be higher in the UF cows’ milk than for either the buffalo or the cows’ milk preparations. The minimum whey fat losses occurred in the UF cows’ curd when compared to the cows’ and the buffalo curd. The whey protein losses were found to be higher in the UF cows’ curd than those for the buffalo and the cows’ curds. The total mineral content of the curd was also higher in the UF cows’ milk than that found in either the buffalo or the cows’ milk. SEM micrographs showed that casein micelles sizes were different in the two different types of milk. Casein micelles were also observed to be deformed in the UF cows’ milk samples. UF cows’ milk contained higher amounts of both the αs1- and αs2-casein moieties than either the buffalo or the cows’ milk. Buffalo milk was found to contain a higher concentration of β-casein than either the UF cows’ or untreated cows’ milk samples. Gel strength was found to be higher in the resultant buffalo curd than for curds made from either native cows’ milk or those made from UF cows’ milk. The mineral distribution was also different in the three different types of bovine milk, measured by energy-dispersive X-ray (EDX) analysis. Differences in the curd quality observed between the buffalo and the cows’ milk appear to result from the differences in casein composition and overall micelle structure, rather than casein concentration alone.