Ichthyoplankton survey of the estuarine and inshore waters of the Florida Everglades, May 1971 to February 1972

Quarterly ichthyoplankton sampling was conducted at 16 estuarine and 24 inshore stations along the Florida Everglades from May 1971 to February 1972. The area is one of the most pristine along lhe Florida coast. The survey provided the first comprehensive information on seasonal occurrence, abundance (under 10 m' of surface area), and distribution of fish eggs and larvae in this area. A total of 209,462 fish eggs and 78,865 larvae was collected. Eggs were identified only as fish eggs, but among the larvae, 37 families, 47 genera, and 37 species were identified. Abundance of eggs and larvae, and diversity of larvae, were greatest in the inshore zone. The 10 most abundant fish families which together made up 90.7% of all larvae from the study area were, in descending order of abundance: Clupeidae, Engraulidae, Gobiidae, Sciaenidae, Carangidae, Pomadasyidae, Cynoglossidae, Gerreidae, Triglidae, and Soleidae. Clupeidae, Engraulidae, and Gobiidae made up 59.9% of all larvae. The inshore zone (to a depth of about 10 m) was a spawning ground and nursery for many fishes important to fisheries. The catch of small larvae (<>3.5 mm SL) indicated that most fishes identified from the 10 most abundant families spawned throughout the inshore zone at depths of <> 10 m, but Orthopristis chrysoptera, Gerreidae, and Prionotus spp. spawned at depths > 10 m, with offshore to inshore (eastward) larval transport. Salinity was one of several environmental factors that probably limited the numbers of eggs and larvae in the estuarine zone. Abundance of eggs and larvae at inshore stations was usually as great as, and sometimes greater than, the abundance of eggs and larvae at offshore stations (due west of the Everglades). (PDF file contains 81 pages.)

Configurations and relative efficiencies of shrimp trawls employed in southeastern United States waters

Common shrimp trawl designs employed in the southeastern United States shrimp fishery are the flat, balloon, semiballoon, jib, and super X-3. Recent innovations in trawl design and rigging, including the twin trawl rigging and tongue trawl design, have improved the efficiency of shrimp trawling gear. A description of the construction techniques for the different designs indicate differences which affect gear performance. Measurements of horizontal spread and vertical opening for 76 trawl configurations indicate the relative efficiencies of the different designs. Maximum horizontal spreading efficiency was achieved by the "twin" and "tongue" trawl designs followed by the super X-3, jib, balloon, and semiballoon designs. Designs having the greatest vertical openings were the tongue and flat trawl designs followed by the semiballoon. Maximum total gape dimension was demonstrated by the "Mongoose" tongue trawl. Comparison of trawl spreading efficiency and door area to headrope length ratio indicates that a range of 70-80 in square (per door) of door area is required for each foot of trawl headrope length for maximum efficiency with conventional trawl designs and 66-75 in square per foot of headrope for tongue trawl designs. (PDF file contains 18 pages.)

Measures of turbidity in coastal waters, Coconut Island, Oahu, Hawaii, August 31 - September 2, 2005: workshop proceedings

A three day workshop on turbidity measurements was held at the Hawaii Institute of Marine Biology from August 3 1 to September 2, 2005. The workshop was attended by 30 participants from industry, coastal management agencies, and academic institutions. All groups recognized common issues regarding the definition of turbidity, limitations of consistent calibration, and the large variety of instrumentation that nominally measure "turbidity." The major recommendations, in order of importance for the coastal monitoring community are listed below: 1. The community of users in coastal ecosystems should tighten instrument design configurations to minimize inter-instrument variability, choosing a set of specifications that are best suited for coastal waters. The IS0 7027 design standard is not tight enough. Advice on these design criteria should be solicited through the ASTM as well as Federal and State regulatory agencies representing the majority of turbidity sensor end users. Parties interested in making turbidity measurements in coastal waters should develop design specifications for these water types rather than relying on design standards made for the analysis of drinking water. 2. The coastal observing groups should assemble a community database relating output of specific sensors to different environmental parameters, so that the entire community of users can benefit from shared information. This would include an unbiased, parallel study of different turbidity sensors, employing a variety of designs and configuration in the broadest range of coastal environments. 3. Turbidity should be used as a measure of relative change in water quality rather than an absolute measure of water quality. Thus, this is a recommendation for managers to develop their own local calibrations. See next recommendation. 4. If the end user specifically wants to use a turbidity sensor to measure a specific water quality parameter such as suspended particle concentration, then direct measurement of that water quality parameter is necessary to correlate with 'turbidity1 for a particular environment. These correlations, however, will be specific to the environment in which they are measured. This works because there are many environments in which water composition is relatively stable but varies in magnitude or concentration. (pdf contains 22 pages)

In situ measurement of dissolved inorganic carbon speciation in natural waters, pH, pC02, TA, & TC02, Honolulu, Hawaii, February 16-18, 2005: workshop proceedings

The Alliance for Coastal Technology (ACT) convened a workshop on the in situ measurement of dissolved inorganic carbon species in natural waters in Honolulu, Hawaii, on February 16, 17, and 18, 2005. The workshop was designed to summarize existing technologies for measuring the abundance and speciation of dissolved inorganic carbon and to make strategic recommendations for future development and application of these technologies to coastal research and management. The workshop was not focused on any specific technology, however, most of the attention of the workshop was on in situ pC02 sensors given their recent development and use on moorings for the measurement of global carbon fluxes. In addition, the problems and limitations arising from the long-term deployment of systems designed for the measurement of pH, total dissolved inorganic carbon (DIC), and total alkalinity (TA) were discussed. Participants included researchers involved in carbon biogeochemistry, industry representatives, and coastal resource managers. The primary questions asked during the workshop were: I. What are the major impediments to transform presently used shipboard pC02 measurement systems for use on cost-eficient moorings? 2. What are the major technical hurdles for the in situ measurement of TA and DIC? 3. What specific information do we need to coordinate efforts for proof of concept' testing of existing and new technologies, inter-calibration of those technologies, better software development, and more precise knowledge quantzjjing the geochemistry of dissolved inoeanic carbon species in order to develop an observing system for dissolved inorganic carbon? Based on the discussion resulting from these three questions, the following statements were made: Statement No. 1 Cost-effective, self-contained technologies for making long-term, accurate measurements of the partial pressure of C02 gas in water already exist and at present are ready for deployment on moorings in coastal observing systems. Statement No. 2 Cost-effective, self-contained systems for the measurement of pH, TA, and DIC are still needed to both fully define the carbonate chemistry of coastal waters and the fluxes of carbon between major biogeochemical compartments (e.g., air-sea, shelf-slope, water column-sediment, etc.). (pdf contains 23 pages)

Applications of in situ Fluorometers in Nearshore waters, Cape Elizabeth, Maine, February 2-4,2005: workshop proceedings

The Alliance for Coastal Technologies (ACT) Workshop "Applications of in situ Fluorometers in Nearshore Waters" was held in Cape Elizabeth, Maine, February 2-4,2005, with sponsorship by the Gulf of Maine Ocean Observing System (GoMOOS), one of the ACT partner organization. The purpose of the workshop was to explore recent trends in fluorometry as it relates to resource management applications in nearshore environments. Participants included representatives from state and federal environmental management agencies as well as research institutions, many of whom are currently using this technology in their research and management applications. Manufacturers and developers of fluorometric measuring systems also attended the meeting. The Workshop attendees discussed the historical and present uses of fluorometry technology and identified the great potential for its use by coastal managers to fulfill their regulatory and management objectives. Participants also identified some of the challenges associated with the correct use of Fluorometers to estimate biomass and the rate of primary productivity. The Workshop concluded that in order to expand the existing use of fluorometers in both academic and resource management disciplines, several issues concerning data collection, instrument calibration, and data interpretation needed to be addressed. Participants identified twelve recommendations, the top five of which are listed below: Recommendations 1) Develop a "Guide" that describes the most important aspects of fluorescence measurements. This guide should be written by an expert party, with both research and industry input, and should be distributed by all manufacturers with their instrumentation. The guide should also be made available on the ACT website as well as those of other relevant organizations. The guide should include discussions on the following topics: The benefits of using fluorometers in research and resource management applications; What fluorometers can and cannot provide in terms of measurements; The necessary assumptions required before applying fluorometry; Characterization and calibration of fluorometers; (pdf contains 32 pages)

Utilization of waste waters in fish production: preliminary results from fish culture studies in floating cages in a sewage pond, New Bussa, Nigeria

The utilization of waste waters in aquaculture were briefly reviewed. At the National Institute for Freshwater Fisheries Research (NIFFR), stocking density (20 to 160 fish/m super(3)) experiments using Sarotherodon galilaeus (without supplementary feeding) in floating cages were carried out in a sewage pond (0.4ha surface area). Cage culture of S. galilaeus was observed to have potentials in waste waters aquaculture. Recommendations were made on the execution of an intergrated waste water management and utilization.

A summary of the inventory survey of Nigeria inland waters and preliminary estimates of their fish yield potentials

A summary of the inventory survey of Nigeria inland waters is presented. The survey reveals that Kano State tops the list in reservoir development with an existing water surface area of about 42,773 ha, while Anambra State has the least with about 38 hectares. No reservoir was recorded for Lagos and Rivers States. However, in aspects of existing fish ponds, a total of about 471 ha was recorded for Plateau State and about 5 ha for Niger State. Preliminary estimates of Nigeria's fish yield potentials based on established production records of comparable water bodies in the tropics, at different levels of management, show that the available water mass in the country, estimated at about 12.5 million hectares, could yield a minimum of about 334,214 metric tonnes (m.t.) of fish per annum with little or no management and a maximum of about 511,703 metric tonnes per annum with adequate management. Comparison of the potential yields from inland sources with the projected fish production in Nigeria (1981-1985) based on supply and demand statistics shows that potential yield from inland sources even at a low level of management is relatively higher than the projected inland production and more than double the observed production. The variation between the potential and the observed fish yields in the country has been attributed to the absolute lack of management strategies for our various inland waters. The paper elaborates on possible management strategies for various categories of inland waters as a prelude towards increased fish production in the country

Culturable fish seeds in Nigerian waters: A research survey (1978-1985)

The desired species identified in this survey include mullets, catfishes, fast growing fish predators, species for control of weeds and grass it, ponds, cichlids and shrimps. Five coastal states: Lagos, Ondo, Bendel, Rivers, and Cross River were covered in the studies. Investigations were also carried into the major rivers and their tributaries. A combination of the estimation methods of Le Cren, (1962) and Pitcher and Mac Donald (1973) was employed in the analysis of data. From the detailed data collected from (1978-1985), the survey indicated that about 100 million fish seeds can be collected annually from Nigerian waters using appropriate gear-seine nets, cast nets, and fish traps. Of this number, 60% is available along the coastal belt of the country while 40% is in the major rivers, their tributaries and swamps. At the present level of fish culture development in Nigeria, this is more than enough, even after allowing for 50% mortality due to handling and transportation stress

Contributions to the biology of the engraulid Anchoa naso (Gilbert and Pierson, 1898) from Ecuadorian waters

ENGLISH: One phase of the duties of the Inter-American Tropical Tuna Commission is the gathering and interpretation of data concerning the life history of the commercially important bait species throughout the Eastern Pacific Ocean. During 1958 the Commission established a laboratory in Manta, Ecuador to study tuna. It was subsequently found that this fishery was dependent upon one species of anchovy, Anchoa naso, which was locally referred to as "colorado." During the calendar year 1959 approximately 380,000 scoops of bait were taken by the Manta tuna fleet (Schaefer, 1960), which at that time numbered about 23 vessels. Since then the fleet has increased by about 25 per cent and it is probable that the bait catch has increased also. Virtually nothing has been reported concerning the life history of this species. Hildebrand (1943) reviewed its taxonomy and reported standard lengths ranging from 32 to 135 mm. Peterson (1956) examined specimens from Central America and found them to range from 27 to 66 mm. He also indicated that the species spawned over a long period of time. The present report describes some aspects of the life history of Anchoa naso in Ecuadorian waters. The findings are based on 121 collections taken during the period March 1959 through June 1961. SPANISH: Una fase de las obligaciones de La Comisión Interamericana del Atún Tropical es la obtensión e interpretación de los datos concernientes a la historia natural de las especies de carnada comercialmente importantes en todo el Océano Pacifico Oriental. En el año de 1958 la Comisión estableció un laboratorio en Manta, Ecuador, para estudiar el atún. Se encontró subsecuentemente que esta pesquería dependía de una especie de anchoa, Anchoa naso, conocida localmente con el nombre de colorado. Durante el año calendario de 1959, la flota atunera de Manta, que en ese tiempo alcanzaba a unos 23 barcos, obtuvo aproximadamente 380,000 copas (scoops) de carnada (Schaefer, 1960). Desde entonces la flota ha aumentado en un 25 por ciento, y es probable que la captura de peces-cebo haya aumentado también. Nada se ha informado virtualmente sobre la historia natural de esta especie. Hildebrand (1943) revisó su taxonomia e informó sobre su longitud estándar, que varia entre los 32 y 135 mm. Peterson (1956) examinó especímenes de la América Central, y encontró que variaban entre los 27 y 66 mm. También indicó que la especie desova durante un largo periodo de tiempo. El presente informe describe algunos aspectos de la historia natural de la Anchoa naso en aguas ecuatorianas. Los hallazgos están basados en 121 recolecciones hechas durante el periodo de marzo de 1959 a junio de 1961. (PDF contains 30 pages.)

Enhancing potential fish catch in Nigeria's inland waters

The paper enumerated the following ways of improving fisheries:- Effective implementation of the inland fisheries Decree of 1992, stocking and introduction of new species in to small and medium size reservoirs, enhancement of fish catch through increased artisanal fisheries development, fish hatchery development in strategic zones for increased fingerling production to stock reservoirs and natural water bodies, extensive culture development in flood ponds, and encouragement of commercial aquaculture under private entrepreneurship. The paper further elaborate on the strategies for effective implementation of the above guidelines with the hope of offering solution to problems hindering production in Nigeria

Limnology in relation to fisheries in Tanzanian waters

The study of limnology is important to understand ecosystem dynamics and the ecological basis for fish production in the Lake Victoria which is important for fisheries resources use, planning and management. Physical, chemical and biological parameters are important and known to influence fish population production. Energy fixed by primary producers, e.g. algae, is transfered to higher trophic levels, e.g fish. Factors which influence the dynamics of phytoplankton and zooplankton population, e.g nutrient availability and uptake, growth rate, species composition and biomass, ultimately affect fish production. The commercial fisheries of Lake Victoria consists mainly of piscivorous Lates niloticus (L>), algivorous Oreochromis niloticus (L.) and zooplanktivorous Rastrineobola argentea (Pellegrin)

Stock assessment of Lates niloticus (L.), Oreochromis niloticus (L.) and Rastrineobola argentea (Pellegrin) using fishery dependent data from the Tanzanian waters of Lake Victoria

Catch data were collected from three beaches in the Mwanza area of lake Victoria, Tanzania for Oreochromis niloticus (L.), Rastrineobola argentea (Pellegrin) and Lates niloticus (L.). Sampling took place in October 1997 and February, June and September 1998. The CPUE for O. niloticus was 3.9 to 6kg boat super(-1) and for R. argentea from 98 to 282 kg boat super(-1). There was no obvious trend in catch rates for L. niloticus. The modal length for O. niloticus recorded at Chole beach was 34cm TL. In February, fish were larger (41-45 cm) than in the other surveys. Rastrineobola argentea caught in October 1997 had modal length at 65 mm TL with some smaller fish. In February and June prominent length modes occurred at 45 and 58 mm respectively, which may represent the same cohort as the small fish caught in October 1997. In September 1998, there were two length modes at 46 and 60 mm. The 60 mm fish may represent the same cohort seen in previous surveys, suggesting growth from approximately 30 mm to 60 mm in an eleven-month period. Lates niloticus landed at Kayenze beach over the four surveys had a modal length of 46 cm TL. Fish species encountered on the three beaches during the surveys were O. niloticus, R. argentea, Bagrus docmak Forsskall, Clarias gariepinus (Burchell), Protopterus aethiopicus Heckel, Labeo victorians Boulenger, Synodontis afrofischeri Hilgendorf, Synodontis victoriae Boulanger, Schilbe intermedius (L.), Brycinus jacksonii (Boulanger), Mormyrus kannume Forsskall and Haplochromine cichlids

Results of the first hydroacoustic survey of the Ugandan waters of Lake Victoria

A lakewide hydroacoustic research programme was designed in the Ugandan waters of Lake Victoria in order to ascertain the status of fish stocks. Data obtained from the hydroacoustic surveys were complemented with by catch data from multi mesh gillnets and frame trawls to validate acoustic estimates. Fish were distributed over the whole survey area, though the densities and species composition varied from place to place. Echo traces showed the fish formed schools during daytime and became more dispersed towards evening. Approximately equivalent indices of abundance were estimated for Rastrineobola argentea and Haplocromines. The distribution of the freshwater prawn, Caridina nilotica and the lakefly Chaoborus sp. was patchy. Dense swarms of Chaoborus larvae were observed to disperse from the lake bottom as the night approached thus assuring echo-traces formed by fish on the echogram and making their interpretation difficult. Caridina nilotica were observed to form dense echo-traces at the thermocline

Habitat enhancing marine structures: Creating habitat in urban waters

Although maritime regions support a large portion of the world’s human population, their value as habitat for other species is overlooked. Urban structures that are built in the marine environment are not designed or managed for the habitat they provide, and are built without considering the communities of marine organisms that could colonize them (Clynick et al., 2008). However, the urban waterfront may be capable of supporting a significant proportion of regional aquatic biodiversity (Duffy-Anderson et al., 2003). While urban shorelines will never return to their original condition, some scientists think that the habitat quality of urban waterfronts could be significantly improved through further research and some design modifications, and that many opportunities exist to make these modifications (Russel et al., 1983, Goff, 2008). Habitat enhancing marine structures (or HEMS) are a potentially promising approach to address the impact of cities on marine organisms including habitat fragmentation and degradation. HEMS are a type of habitat improvement project that are ecologically engineered to improve the habitat quality of urban marine structures such as bulkheads and docks for marine organisms. More specifically, HEMS attempt to improve or enhance the physical habitat that organisms depend on for survival in the inter- and sub-tidal waterfronts of densely populated areas. HEMS projects are targeted at areas where human-made structures cannot be significantly altered or removed. While these techniques can be used in suburban or rural areas restoration or removal is preferred in these settings, and HEMS are resorted to only if removal of the human-made structure is not an option. Recent research supports the use of HEMS projects. Researchers have examined the communities found on urban structures including docks, bulkheads, and breakwaters. Complete community shifts have been observed where the natural shoreline was sandy, silty, or muddy. There is also evidence of declines in community composition, ecosystem functioning, and increases in non-native species abundances in assemblages on urban marine structures. Researchers have identified two key differences between these substrates including the slope (seawalls are vertical; rocky shores contain multiple slopes) and microhabitat availability (seawalls have very little; rocky shores contain many different types). In response, researchers have suggested designing and building seawalls with gentler slopes or a combination of horizontal and vertical surfaces. Researchers have also suggested incorporating microhabitat, including cavities designed to retain water during low tide, crevices, and other analogous features (Chapman, 2003; Moreira et al., 2006) (PDF contains 4 pages)

Developing effective restoration plans to tackle the widespread impairment of coastal swimming and shellfishing waters

Congress established a legal imperative to restore the quality of our surface waters when it enacted the Clean Water Act in 1972. The act requires that existing uses of coastal waters such as swimming and shellfishing be protected and restored. Enforcement of this mandate is frequently measured in terms of the ability to swim and harvest shellfish in tidal creeks, rivers, sounds, bays, and ocean beaches. Public-health agencies carry out comprehensive water-quality sampling programs to check for bacteria contamination in coastal areas where swimming and shellfishing occur. Advisories that restrict swimming and shellfishing are issued when sampling indicates that bacteria concentrations exceed federal health standards. These actions place these coastal waters on the U.S. Environmental Protection Agencies’ (EPA) list of impaired waters, an action that triggers a federal mandate to prepare a Total Maximum Daily Load (TMDL) analysis that should result in management plans that will restore degraded waters to their designated uses. When coastal waters become polluted, most people think that improper sewage treatment is to blame. Water-quality studies conducted over the past several decades have shown that improper sewage treatment is a relatively minor source of this impairment. In states like North Carolina, it is estimated that about 80 percent of the pollution flowing into coastal waters is carried there by contaminated surface runoff. Studies show this runoff is the result of significant hydrologic modifications of the natural coastal landscape. There was virtually no surface runoff occurring when the coastal landscape was natural in places such as North Carolina. Most rainfall soaked into the ground, evaporated, or was used by vegetation. Surface runoff is largely an artificial condition that is created when land uses harden and drain the landscape surfaces. Roofs, parking lots, roads, fields, and even yards all result in dramatic changes in the natural hydrology of these coastal lands, and generate huge amounts of runoff that flow over the land’s surface into nearby waterways. (PDF contains 3 pages)