Private investment in the countryside: an assessment of the role of new houses and estates in sustaining the rural economy and environment

The British countryside has been shaped and sustained over the years by the establishment of landed estates. Some of our best known, and now most protected, landmarks derive from this tradition by which money, that was often sourced from outside the rural economy, was invested in land. Whilst there was some reversal in this trend during the last century, there is again a widespread desire among people of means to invest in new country property. Paragraph 3.21 of Planning Policy Guidance Note 7: The Countryside - Environmental Quality and Economic and Social Development was introduced in 1997 as a means of perpetuating the historic tradition of innovation in the countryside through the construction of fine individual houses in landscaped grounds. That it was considered necessary to use a special provision of this kind reflects the prevailing presumption of planning authorities against allowing private residential development in open countryside. The Government is currently reviewing rural planning policy and is focusing on higher density housing, affordable homes and the use of brownfield sites. There is an underlying conception that individual private house developments contribute nothing and are seen as the least attractive option for most development sites. The purpose of paragraph 3.21 lies outside the government’s priorities and its particular provisions may therefore be excluded in forthcoming ‘policy statements’. This paper seeks to examine the role of private investors wishing to build new houses in the countryside, and the impact that that might have on local economies. It explores the interpretation placed on PPG7 through an investigation of appeal sites, and concludes by making recommendations for the review process, including the retention of some form of exceptions policy for new build houses.

Carolingian culture in the North Sea world: rethinking the cultural dynamics of personal adornment in Viking age England

Boosted by a proliferation in metal-detected finds, categories of personal adornment now constitute a vital archaeological source for interpreting Viking-age cultural interaction in the North Sea region. Previous research in England has explored the potential of this metalwork in relation to the formation of ‘Anglo-Scandinavian’ identity, but without due consideration of a wider spectrum of cultural influences. This article redresses the balance by shifting attention to twenty-eight belt fittings derived from richly embellished baldrics, equestrian equipment, and waist belts manufactured on the Frankish continent during the period of Carolingian hegemony in the later eighth and ninth centuries ad. The metalwork is classified and then contextualized in order to track import mechanisms and to assess the impact of Carolingian culture on the northern peripheries of the Frankish empire. The main conclusion is that the adoption, adaptation, and strategic manipulation of Carolingian/northern Frankish identity formed an embedded component of cultural dynamics in Viking-age England, scrutiny of which sheds new light on patterns of interconnectivity linking peoples of the North Sea world.

Accounting information systems as institutional carriers: a case study of regulatory compliance in UK asset management houses

Previously, governments have responded to the impacts of economic failures and consequently have developed more regulations to protect employees, customers, shareholders and the economic wellbeing of the state. Our research addresses how Accounting Information Systems (AIS) may act as carriers for institutionalised practices associated with maintaining regulatory compliance within the context of UK Asset Management Houses. The AIS was found to be a strong conduit for institutionalized compliance related practices, utilising symbolic systems, relational systems, routines and artefacts to carry approaches relating to regulative, normative and cultural-cognitive strands of institutionalism. Thus, AIS are integral to the development and dissipation of best practice for the management of regulatory compliance. As institutional elements are clearly present we argue that AIS and regulatory compliance provide a rich context to further institutionalism. Since AIS may act as conduits for regulatory approaches, both systems adopters and clients may benefit from actively seeking to codify and abstract best practices into AIS. However, the application of generic institutionalized approaches, which may be applied across similar organizations, must be tempered with each firm’s business environment and associated regulatory exposure. A balance should be sought between approaches specific enough to be useful but generic enough to be universally applied.

Equal Couples in Equal Houses : Cultural perspectives on Swedish solar and bio-pellet heating design

Knowing how to design a heating system that will work mechanically is quite different from knowling how to design a system that users perceive as responsive to their domestic practices and values. In this chapter, social anthropologist Henning argues that the challenge for designers involved in the development or marketing of green buildings with heating systems that are based on renewable sources of energy is to see things from the perspective of those who are supposed to live in these buildings. The chapter focuses on three culture-specific aspects of Swedish households and single-family houses: perceptions of house and home, of private and public space, and of male and female space. Through these three angles, some clues are given as to how design, performance and location of solar and bio-pellet heating systems could be made to resonate with predominant experiences, habits and ways of thinking among both men and women.

Decisions with Impact on Energy Reduction Opportunities : Swedish manufacturers and buyers of new single-family houses

This article discusses some of the complexities of human decision-making. It aims, in particular, at relating the nature of decision-making to the illusory dichotomies of change and stability, individual actions and cultural sharing. Serving as an illustration to the discussion of the article is ongoing fieldwork in contexts of buying, selling and constructing pre-fabricated detached houses in the central Sweden, and the very specific question of how decisions to install one kind of heating-system rather than another come about. A common reductionism is to narrow down the understanding of decisions about heating systems and energy consumption to conscious choices made by individual householders. I have asked myself whether, on the contrary, anyone actually makes such decisions at all. Perhaps some of these decisions are merely outcomes of interaction between different individuals with their respective responsibilities and focuses of interest.

The Application Of Renewable Energy For Prefab Houses In Germany

Within the framework of the REBUS project the German building industry has been investigated regarding their energy concepts. The intention was to evaluatethe establishment of renewable energy sources on the German market for new built houses and prefab houses in particular. For this purpose the products of 85manufacturers of prefab houses have been analyzed. Of special interest was the applicationof heating and hot water systems driven by solar energy and biomass. The results show that both techniques are well accepted and established. Almost 90% of themanufacturers offer solar systems on request and almost 70% heating systems based on Pellets. 24% offered solar and 7% as standard options in their range. From theachieved figures the potential of the Swedish market can be worked out. Strategies to introduce renewable energy to a greater extent to Swedish house manufacturers and builders might also be found.

Combined solar and pellet heating systems for single-family houses : How to achieve decreased electricity usage, increased system efficiency and increased solar gains

In Sweden, there are about 0.5 million single-family houses that are heated by electricity alone, and rising electricity costs force the conversion to other heating sources such as heat pumps and wood pellet heating systems. Pellet heating systems for single-family houses are currently a strongly growing market. Future lack of wood fuels is possible even in Sweden, and combining wood pellet heating with solar heating will help to save the bio-fuel resources. The objectives of this thesis are to investigate how the electrically heated single-family houses can be converted to pellet and solar heating systems, and how the annual efficiency and solar gains can be increased in such systems. The possible reduction of CO-emissions by combining pellet heating with solar heating has also been investigated. Systems with pellet stoves (both with and without a water jacket), pellet boilers and solar heating have been simulated. Different system concepts have been compared in order to investigate the most promising solutions. Modifications in system design and control strategies have been carried out in order to increase the system efficiency and the solar gains. Possibilities for increasing the solar gains have been limited to investigation of DHW-units for hot water production and the use of hot water for heating of dishwashers and washing machines via a heat exchanger instead of electricity (heat-fed appliances). Computer models of pellet stoves, boilers, DHW-units and heat-fed appliances have been developed and the parameters for the models have been identified from measurements on real components. The conformity between the models and the measurements has been checked. The systems with wood pellet stoves have been simulated in three different multi-zone buildings, simulated in detail with heat distribution through door openings between the zones. For the other simulations, either a single-zone house model or a load file has been used. Simulations were carried out for Stockholm, Sweden, but for the simulations with heat-fed machines also for Miami, USA. The foremost result of this thesis is the increased understanding of the dynamic operation of combined pellet and solar heating systems for single-family houses. The results show that electricity savings and annual system efficiency is strongly affected by the system design and the control strategy. Large reductions in pellet consumption are possible by combining pellet boilers with solar heating (a reduction larger than the solar gains if the system is properly designed). In addition, large reductions in carbon monoxide emissions are possible. To achieve these reductions it is required that the hot water production and the connection of the radiator circuit is moved to a well insulated, solar heated buffer store so that the boiler can be turned off during the periods when the solar collectors cover the heating demand. The amount of electricity replaced using systems with pellet stoves is very dependant on the house plan, the system design, if internal doors are open or closed and the comfort requirements. Proper system design and control strategies are crucial to obtain high electricity savings and high comfort with pellet stove systems. The investigated technologies for increasing the solar gains (DHW-units and heat-fed appliances) significantly increase the solar gains, but for the heat-fed appliances the market introduction is difficult due to the limited financial savings and the need for a new heat distribution system. The applications closest to market introduction could be for communal laundries and for use in sunny climates where the dominating part of the heat can be covered by solar heating. The DHW-unit is economical but competes with the internal finned-tube heat exchanger which is the totally dominating technology for hot water preparation in solar combisystems for single-family houses.

Thermal energy storage in Swedish single family houses : a case study

In a Nordic climate, space heating (SH) and domestic hot water (DHW) used in buildings constitute a considerable part of the total energy use in the country. For 2010, energy used for SH and DHW amounted to almost 90 TWh in Sweden which corresponds to 60 % of the energy used in the residential and service sector, or almost 24 % of the total final energy use for the country. Storing heat and cold with the use of thermal energy storage (TES) can be one way of increasing the energy efficiency of a building by opening up possibilities for alternative sources of heat or cold through a reduced mismatch between supply and demand. Thermal energy storage without the use of specific control systems are said to be passive and different applications using passive TES have been shown to increase energy efficiency and/or reduce power peaks of systems supplying the heating and cooling needs of buildings, as well as having an effect on the indoor climate. Results are however not consistent between studies and focus tend to be on the reduction of cooling energy or cooling power peaks. In this paper, passive TES introduced through an increased thermal mass in the building envelope to two single family houses with different insulation standard is investigated with building energy simulations. A Nordic climate is used and the focus of this study is both on the reduction of space heating demand and space heating power, as well as on reduction of excess temperatures in residential single family houses without active cooling systems. Care is taken to keep the building envelope characteristics other than the thermal mass equal for all cases so that any observations made can be derived to the change in thermal mass. Results show that increasing the sensible thermal mass in a single family house can reduce the heating demand only slightly (1-4 %) and reduce excess temperatures (temperatures above 24 degrees C) by up to 20 %. Adding a layer of PCM (phase change materials) to the light building construction can give similar reduction in heating demand and excess temperatures, however the phase change temperature is important for the results.