Head movement synchrony in social interactions of patients with schizophrenia indicates symptoms, cognition and social functioning

Background: Disturbed interpersonal communication is a core problem in schizophrenia. Patients with schizophrenia often appear disconnected and "out of sync" when interacting with others. This may involve perception, cognition, motor behavior, and nonverbal expressiveness. Although well-known from clinical observation, mainstream research has neglected this area. Corresponding theoretical concepts, statistical methods, and assessment were missing. In recent research, however, it has been shown that objective, video-based measures of nonverbal behavior can be used to reliably quantify nonverbal behavior in schizophrenia. Newly developed algorithms allow for a calculation of movement synchrony. We found that the objective amount of movement of patients with schizophrenia during social interactions was closely related to the symptom profiles of these patients (Kupper et al., 2010). In addition and above the mere amount of movement, the degree of synchrony between patients and healthy interactants may be indicative of various problems in the domain of interpersonal communication and social cognition. Methods: Based on our earlier study, head movement synchrony was assessed objectively (using Motion Energy Analysis, MEA) in 378 brief, videotaped role-play scenes involving 27 stabilized outpatients diagnosed with paranoid-type schizophrenia. Results: Lower head movement synchrony was indicative of symptoms (negative symptoms, but also of conceptual disorganization and lack of insight), verbal memory, patients’ self-evaluation of competence, and social functioning. Many of these relationships remained significant even when corrected for the amount of movement of the patients. Conclusion: The results suggest that nonverbal synchrony may be an objective and sensitive indicator of the severity of symptoms, cognition and social functioning.

Impaired top-down modulation of saccadic latencies in patients with schizophrenia but not in first-degree relatives

Impaired eye movements have a long history in schizophrenia research and meet the criteria of a reliable biomarker. However, the effects of cognitive load and task difficulty on saccadic latencies (SL) are less understood. Recent studies showed that SL are strongly task dependent: SL are decreased in tasks with higher cognitive demand, and increased in tasks with lower cognitive demand. The present study investigates SL modulation in patients with schizophrenia and their first-degree relatives. A group of 13 patients suffering from ICD-10 schizophrenia, 10 first-degree relatives, and 24 control subjects performed two different types of visual tasks: a color task and a Landolt ring orientation task. We used video-based oculography to measure SL. We found that patients exhibited a similar unspecific SL pattern in the two different tasks, whereas controls and relatives exhibited 20–26% shorter average latencies in the orientation task (higher cognitive demand) compared to the color task (lower cognitive demand). Also, classification performance using support vector machines suggests that relatives should be assigned to the healthy controls and not to the patient group. Therefore, visual processing of different content does not modulate SL in patients with schizophrenia, but modulates SL in the relatives and healthy controls. The results reflect a specific oculomotor attentional dysfunction in patients with schizophrenia that is a potential state marker, possibly caused by impaired top-down disinhibition of the superior colliculus by frontal/prefrontal areas such as the frontal eye fields.

Active methane seepage in the Southern Ocean, off the sub-Antarctic island of South Georgia

An extensive submarine cold-seep area was discovered on the northern shelf of South Georgia during R/V Polarstern cruise ANT-XXIX/4 in spring 2013. Hydroacoustic surveys documented the presence of 133 gas bubble emissions, which were restricted to glacially-formed fjords and troughs. Video-based sea floor observations confirmed the sea floor origin of the gas emissions and spatially related microbial mats. Effective methane transport from these emissions into the hydrosphere was proven by relative enrichments of dissolved methane in near-bottom waters. Stable carbon isotopic signatures pointed to a predominant microbial methane formation, presumably based on high organic matter sedimentation in this region. Although known from many continental margins in the world's oceans, this is the first report of an active area of methane seepage in the Southern Ocean. Our finding of substantial methane emission related to a trough and fjord system, a topographical setting that exists commonly in glacially-affected areas, opens up the possibility that methane seepage is a more widespread phenomenon in polar and sub-polar regions than previously thought.

Conceptual framework for the design, implementation and validation of psychomotor skills’ assessment systems in minimally invasive surgery

Las técnicas de cirugía de mínima invasión (CMI) se están consolidando hoy en día como alternativa a la cirugía tradicional, debido a sus numerosos beneficios para los pacientes. Este cambio de paradigma implica que los cirujanos deben aprender una serie de habilidades distintas de aquellas requeridas en cirugía abierta. El entrenamiento y evaluación de estas habilidades se ha convertido en una de las mayores preocupaciones en los programas de formación de cirujanos, debido en gran parte a la presión de una sociedad que exige cirujanos bien preparados y una reducción en el número de errores médicos. Por tanto, se está prestando especial atención a la definición de nuevos programas que permitan el entrenamiento y la evaluación de las habilidades psicomotoras en entornos seguros antes de que los nuevos cirujanos puedan operar sobre pacientes reales. Para tal fin, hospitales y centros de formación están gradualmente incorporando instalaciones de entrenamiento donde los residentes puedan practicar y aprender sin riesgos. Es cada vez más común que estos laboratorios dispongan de simuladores virtuales o simuladores físicos capaces de registrar los movimientos del instrumental de cada residente. Estos simuladores ofrecen una gran variedad de tareas de entrenamiento y evaluación, así como la posibilidad de obtener información objetiva de los ejercicios. Los diferentes estudios de validación llevados a cabo dan muestra de su utilidad; pese a todo, los niveles de evidencia presentados son en muchas ocasiones insuficientes. Lo que es más importante, no existe un consenso claro a la hora de definir qué métricas son más útiles para caracterizar la pericia quirúrgica. El objetivo de esta tesis doctoral es diseñar y validar un marco de trabajo conceptual para la definición y validación de entornos para la evaluación de habilidades en CMI, en base a un modelo en tres fases: pedagógica (tareas y métricas a emplear), tecnológica (tecnologías de adquisición de métricas) y analítica (interpretación de la competencia en base a las métricas). Para tal fin, se describe la implementación práctica de un entorno basado en (1) un sistema de seguimiento de instrumental fundamentado en el análisis del vídeo laparoscópico; y (2) la determinación de la pericia en base a métricas de movimiento del instrumental. Para la fase pedagógica se diseñó e implementó un conjunto de tareas para la evaluación de habilidades psicomotoras básicas, así como una serie de métricas de movimiento. La validación de construcción llevada a cabo sobre ellas mostró buenos resultados para tiempo, camino recorrido, profundidad, velocidad media, aceleración media, economía de área y economía de volumen. Adicionalmente, los resultados obtenidos en la validación de apariencia fueron en general positivos en todos los grupos considerados (noveles, residentes, expertos). Para la fase tecnológica, se introdujo el EVA Tracking System, una solución para el seguimiento del instrumental quirúrgico basado en el análisis del vídeo endoscópico. La precisión del sistema se evaluó a 16,33ppRMS para el seguimiento 2D de la herramienta en la imagen; y a 13mmRMS para el seguimiento espacial de la misma. La validación de construcción con una de las tareas de evaluación mostró buenos resultados para tiempo, camino recorrido, profundidad, velocidad media, aceleración media, economía de área y economía de volumen. La validación concurrente con el TrEndo® Tracking System por su parte presentó valores altos de correlación para 8 de las 9 métricas analizadas. Finalmente, para la fase analítica se comparó el comportamiento de tres clasificadores supervisados a la hora de determinar automáticamente la pericia quirúrgica en base a la información de movimiento del instrumental, basados en aproximaciones lineales (análisis lineal discriminante, LDA), no lineales (máquinas de soporte vectorial, SVM) y difusas (sistemas adaptativos de inferencia neurodifusa, ANFIS). Los resultados muestran que en media SVM presenta un comportamiento ligeramente superior: 78,2% frente a los 71% y 71,7% obtenidos por ANFIS y LDA respectivamente. Sin embargo las diferencias estadísticas medidas entre los tres no fueron demostradas significativas. En general, esta tesis doctoral corrobora las hipótesis de investigación postuladas relativas a la definición de sistemas de evaluación de habilidades para cirugía de mínima invasión, a la utilidad del análisis de vídeo como fuente de información y a la importancia de la información de movimiento de instrumental a la hora de caracterizar la pericia quirúrgica. Basándose en estos cimientos, se han de abrir nuevos campos de investigación que contribuyan a la definición de programas de formación estructurados y objetivos, que puedan garantizar la acreditación de cirujanos sobradamente preparados y promocionen la seguridad del paciente en el quirófano. Abstract Minimally invasive surgery (MIS) techniques have become a standard in many surgical sub-specialties, due to their many benefits for patients. However, this shift in paradigm implies that surgeons must acquire a complete different set of skills than those normally attributed to open surgery. Training and assessment of these skills has become a major concern in surgical learning programmes, especially considering the social demand for better-prepared professionals and for the decrease of medical errors. Therefore, much effort is being put in the definition of structured MIS learning programmes, where practice with real patients in the operating room (OR) can be delayed until the resident can attest for a minimum level of psychomotor competence. To this end, skills’ laboratory settings are being introduced in hospitals and training centres where residents may practice and be assessed on their psychomotor skills. Technological advances in the field of tracking technologies and virtual reality (VR) have enabled the creation of new learning systems such as VR simulators or enhanced box trainers. These systems offer a wide range of tasks, as well as the capability of registering objective data on the trainees’ performance. Validation studies give proof of their usefulness; however, levels of evidence reported are in many cases low. More importantly, there is still no clear consensus on topics such as the optimal metrics that must be used to assess competence, the validity of VR simulation, the portability of tracking technologies into real surgeries (for advanced assessment) or the degree to which the skills measured and obtained in laboratory environments transfer to the OR. The purpose of this PhD is to design and validate a conceptual framework for the definition and validation of MIS assessment environments based on a three-pillared model defining three main stages: pedagogical (tasks and metrics to employ), technological (metric acquisition technologies) and analytical (interpretation of competence based on metrics). To this end, a practical implementation of the framework is presented, focused on (1) a video-based tracking system and (2) the determination of surgical competence based on the laparoscopic instruments’ motionrelated data. The pedagogical stage’s results led to the design and implementation of a set of basic tasks for MIS psychomotor skills’ assessment, as well as the definition of motion analysis parameters (MAPs) to measure performance on said tasks. Validation yielded good construct results for parameters such as time, path length, depth, average speed, average acceleration, economy of area and economy of volume. Additionally, face validation results showed positive acceptance on behalf of the experts, residents and novices. For the technological stage the EVA Tracking System is introduced. EVA provides a solution for tracking laparoscopic instruments from the analysis of the monoscopic video image. Accuracy tests for the system are presented, which yielded an average RMSE of 16.33pp for 2D tracking of the instrument on the image and of 13mm for 3D spatial tracking. A validation experiment was conducted using one of the tasks and the most relevant MAPs. Construct validation showed significant differences for time, path length, depth, average speed, average acceleration, economy of area and economy of volume; especially between novices and residents/experts. More importantly, concurrent validation with the TrEndo® Tracking System presented high correlation values (>0.7) for 8 of the 9 MAPs proposed. Finally, the analytical stage allowed comparing the performance of three different supervised classification strategies in the determination of surgical competence based on motion-related information. The three classifiers were based on linear (linear discriminant analysis, LDA), non-linear (support vector machines, SVM) and fuzzy (adaptive neuro fuzzy inference systems, ANFIS) approaches. Results for SVM show slightly better performance than the other two classifiers: on average, accuracy for LDA, SVM and ANFIS was of 71.7%, 78.2% and 71% respectively. However, when confronted, no statistical significance was found between any of the three. Overall, this PhD corroborates the investigated research hypotheses regarding the definition of MIS assessment systems, the use of endoscopic video analysis as the main source of information and the relevance of motion analysis in the determination of surgical competence. New research fields in the training and assessment of MIS surgeons can be proposed based on these foundations, in order to contribute to the definition of structured and objective learning programmes that guarantee the accreditation of well-prepared professionals and the promotion of patient safety in the OR.

AMELIE: Authoring Multimedia-Enhanced Learning Interactive Environment for medical contents

This paper presents the AMELIE Authoring Tool for medical e-learning applications. The tool allows for the creation of enhanced-video based didactic contents, and can be adjusted to any number of platforms and applications. Validation provides preliminary good results on its acceptance and usefulness.

AMELIE: Authoring Multimedia-Enhanced Learning Interactive Environment for e-Health Contents

This paper presents the AMELIE Authoring Tool for e-health applications. AMELIE provides the means for creating video-based contents with a focus on e-learning and telerehabilitation processes. The main core of AMELIE lies in the efficient exploitation of raw multimedia resources, which may be already available at clinical centers or recorded ad hoc for learning purposes by health professionals. Three real use cases scenarios involving different target users are presented: (1) cognitive skills? training of surgeons in minimally invasive surgery (medical professionals), (2) training of informal carers for elderly home assistance and (3) cognitive rehabilitation of patients with acquired brain injury. Preliminary validation in the field of surgery hints at the potential of AMELIE; and its versatility in different medical applications is patent from the use cases described. Regardless, new validation studies are planned in the three main application areas identified in this work.

Region-dependent vehicle classification using PCA features

Video-based vehicle detection is the focus of increasing interest due to its potential towards collision avoidance. In particular, vehicle verification is especially challenging due to the enormous variability of vehicles in size, color, pose, etc. In this paper, a new approach based on supervised learning using Principal Component Analysis (PCA) is proposed that addresses the main limitations of existing methods. Namely, in contrast to classical approaches which train a single classifier regardless of the relative position of the candidate (thus ignoring valuable pose information), a region-dependent analysis is performed by considering four different areas. In addition, a study on the evolution of the classification performance according to the dimensionality of the principal subspace is carried out using PCA features within a SVM-based classification scheme. Indeed, the experiments performed on a publicly available database prove that PCA dimensionality requirements are region-dependent. Hence, in this work, the optimal configuration is adapted to each of them, rendering very good vehicle verification results.

Fast human pose estimation using 3D Zernike descriptors

Markerless video-based human pose estimation algorithms face a high-dimensional problem that is frequently broken down into several lower-dimensional ones by estimating the pose of each limb separately. However, in order to do so they need to reliably locate the torso, for which they typically rely on time coherence and tracking algorithms. Their losing track usually results in catastrophic failure of the process, requiring human intervention and thus precluding their usage in real-time applications. We propose a very fast rough pose estimation scheme based on global shape descriptors built on 3D Zernike moments. Using an articulated model that we configure in many poses, a large database of descriptor/pose pairs can be computed off-line. Thus, the only steps that must be done on-line are the extraction of the descriptors for each input volume and a search against the database to get the most likely poses. While the result of such process is not a fine pose estimation, it can be useful to help more sophisticated algorithms to regain track or make more educated guesses when creating new particles in particle-filter-based tracking schemes. We have achieved a performance of about ten fps on a single computer using a database of about one million entries.

ExperNet: An Intelligent Multiagent System for WAN Management

This paper describes ExperNet, an intelligent multi-agent system that was developed under an EU funded project to assist in the management of a large-scale data network. ExperNet assists network operators at various nodes of a WAN to detect and diagnose hardware failures and network traffic problems and suggests the most feasible solution, through a web-based interface. ExperNet is composed by intelligent agents, capable of both local problem solving and social interaction among them for coordinating problem diagnosis and repair. The current network state is captured and maintained by conventional network management and monitoring software components, which have been smoothly integrated into the system through sophisticated information exchange interfaces. For the implementation of the agents, a distributed Prolog system enhanced with networking facilities was developed. The agents’ knowledge base is developed in an extensible and reactive knowledge base system capable of handling multiple types of knowledge representation. ExperNet has been developed, installed and tested successfully in an experimental network zone of Ukraine.

AMELIE: Authoring Multimedia-Enhanced Learning Interactive Environment for medical contents

This paper presents the AMELIE Authoring Tool for medical e-learning applications. The tool allows for the creation of enhanced-video based didactic contents, and can be adjusted to any number of platforms and applications. Validation provides preliminary good results on its acceptance and usefulness.

Caracterización de la agitación local y la respuesta oscilatoria de un buque mediante el uso de técnicas de visión artificial : aplicación al análisis de los umbrales operativos en líneas de atraque y amarre

El desarrollo de actividades de carga y descarga son parte de la esencia de la naturaleza funcional de un puerto, de las cuales derivan en gran medida los ingresos del mismo y la eficiencia de la cadena logística en su conjunto. Las oscilaciones en el interior de una dársena y en un línea de atraque disminuyen la calidad de la estancia de las embarcaciones en puerto, reducen el rendimiento de la estiba de los buques y solicitan y fatigan las estructuras y los cuerpos flotantes amarrados. Si los parámetros que definen la agitación local se aproximan a regiones de fallo 0 parada, el subsistema pierde rendimiento, fiabilidad y finalmente se paralizan las operaciones, produciéndose de este modo tiempos de inactividad. Estas paradas operativas conllevan pérdidas económicas para la terminal y, consecuentemente, para el puerto. Hoy día se dispone vastas redes de monitorización destinadas a la caracterización del medio físico en el entorno de los puertos. Paralelamente, las operaciones de manipulación de cargas en las terminales se están dirigiendo hacia modelos de automatización o semi automatización, que permiten no sólo la sistematización de procesos, sino también un profundo conocimiento del flujo de tareas. En este contexto hay un déficit de información sobre cómo afectan los diferentes forzadores del medio físico al rendimiento, la seguridad funcionalidad del proceso de manipulación de carga y descarga. Esto se debe en gran medida a la falta de registros dilatados en el tiempo que permitan correlacionar todos los aspectos mencionados de un modo particularizado para cada línea de atraque y amarre de un puerto. En esta tesis se desarrolla una metodología de vídeo monitorización no intrusiva y de bajo coste basada en la aplicación de técnicas "pixel tool' y la obtención de los parámetros extrínsecos de una observación monofocal. Con ello pretende poner en valor las infraestructuras de vídeo vigilancia de los puertos y de los laboratorios de experimentación a escala reducida, con el objeto de facilitar el estudio los umbrales operativos de las áreas de atraque y amarre. The development of loading and unloading activities is an essential part of he functional nature of a port, which derive largely from he same income and the efficiency of he supply chain as a whole. The oscillations inside a dock and a mooring line diminish he quality of the stay of vessels in port reducing the performance of the stowage of ship and asking and fatigued structures and moored floating bodies. If the parameters defining the local al agitation regions are close to areas of failure or shutdown, he subsystem looses performance, reliability and eventually paralyzes the operations, thereby producing downtime. These operational stops entail economic 1osses to the terminal and, consequently for the port. Today vast networks of monitoring, aimed at he characterization of the physical environment in the vicinity of he ports, are available. In parallel, the cargo handling operations at terminals are moving towards automation or semi-automation models that allow not only the systematization of processes, but also a deep understanding of he workflow. In this context, there is a lack of information about how the different forcing agents of the physical environment affect the performance and he functional safety of the loading and unloading process. This is due largely to the lack of spread-over-time records which would allow to correlate all aspects mentioned, specifically, for each berthing and mooring of a port. This thesis develops a methodology for non-intrusive and low cost monitoring video based on the application of "pixel tool" techniques and on obtaining the extrinsic parameters of a monofocal observation. It seeks an enhancement of the video monitoring infrastructure at ports and at experimental laboratories of reduced scale, in order to facilitate the study of operational thresholds berthing and mooring areas.

A pedagogically-supported TEL solution for learning nontechnical minimally invasive surgical skills across Europe

Residents learning nontechnical skills in Europe face two problems: (1) the difficulty to fit learning time in their overloaded schedules; and (2) the lack of standard pedagogical models for all countries. Online video-based repositories such as WeBSurg or WebOP provide ubiquitous access to surgical contents. However, their pedagogical facets have not been fully exploited and they are often seen as quick-reference repositories rather than full e-learning alternatives. We present a new pedagogically-supported Technology Enhanced Learning (TEL) solution, MISTELA, designed by surgeons, pedagogical experts and engineers. MISTELA aims at building a common European pedagogical model supported by ICT technologies and elearning. The solution proposes a pedagogical model based on a framework for pedagogically-informed design of e-learning platforms. It is composed of (1) an authoring tool for editing and augmenting videos; (2) a media asset management system; and (3) a virtual learning environment. Support of the European Association for Endoscopic Surgery (EAES) and validation of the solution, will help to determine its full potential.

Hydrodynamic forces on heave plates for offshore systems oscillating close to the seabed or the free surface

La energía eólica marina es uno de los recursos energéticos con mayor proyección pudiendo contribuir a reducir el consumo de combustibles fósiles y a cubrir la demanda de energía en todo el mundo. El concepto de aerogenerador marino está basado en estructuras fijas como jackets o en plataformas flotantes, ya sea una semisumergible o una TLP. Se espera que la energía eólica offshore juegue un papel importante en el perfil de producción energética de los próximos años; por tanto, las turbinas eólicas deben hacerse más fables y rentables para ser competitivas frente a otras fuentes de energía. Las estructuras flotantes pueden experimentar movimientos resonantes en estados de la mar con largos períodos de oleaje. Estos movimientos disminuyen su operatividad y pueden causar daños en los componentes eléctricos de las turbinas y en las palas, también en los risers y moorings. La respuesta de la componente vertical del movimiento puede reducirse mediante diferentes actuaciones: (1) aumentando la amortiguación del sistema, (2) manteniendo el período del movimiento vertical fuera del rango de la energía de la ola, y (3) reduciendo las fuerzas de excitación verticales. Un ejemplo típico para llevar a cabo esta reducción son las "Heave Plates". Las heave plates son placas que se utilizan en la industria offshore debido a sus características hidrodinámicas, ya que aumentan la masa añadida y la amortiguación del sistema. En un análisis hidrodinámico convencional, se considera una estructura sometida a un oleaje con determinadas características y se evalúan las cargas lineales usando la teoría potencial. El amortiguamiento viscoso, que juega un papel crucial en la respuesta en resonancia del sistema, es un dato de entrada para el análisis. La tesis se centra principalmente en la predicción del amortiguamiento viscoso y de la masa añadida de las heave plates usadas en las turbinas eólicas flotantes. En los cálculos, las fuerzas hidrodinámicas se han obtenido con el f n de estudiar cómo los coeficientes hidrodinámicos de masa añadida5 y amortiguamiento varían con el número de KC, que caracteriza la amplitud del movimiento respecto al diámetro del disco. Por otra parte, se ha investigado la influencia de la distancia media de la ‘heave plate’ a la superficie libre o al fondo del mar, sobre los coeficientes hidrodinámicos. En este proceso, un nuevo modelo que describe el trabajo realizado por la amortiguación en función de la enstrofía, es descrito en el presente documento. Este nuevo enfoque es capaz de proporcionar una correlación directa entre el desprendimiento local de vorticidad y la fuerza de amortiguación global. El análisis también incluye el estudio de los efectos de la geometría de la heave plate, y examina la sensibilidad de los coeficientes hidrodinámicos al incluir porosidad en ésta. Un diseño novedoso de una heave plate, basado en la teoría fractal, también fue analizado experimentalmente y comparado con datos experimentales obtenidos por otros autores. Para la resolución de las ecuaciones de Navier Stokes se ha usado un solver basado en el método de volúmenes finitos. El solver usa las librerías de OpenFOAM (Open source Field Operation And Manipulation), para resolver un problema multifásico e incompresible, usando la técnica VOF (volume of fluid) que permite capturar el movimiento de la superficie libre. Los resultados numéricos han sido comparados con resultados experimentales llevados a cabo en el Canal del Ensayos Hidrodinámicos (CEHINAV) de la Universidad Politécnica de Madrid y en el Canal de Experiencias Hidrodinámicas (CEHIPAR) en Madrid, al igual que con otros experimentos realizados en la Escuela de Ingeniería Mecánica de la Universidad de Western Australia. Los principales resultados se presentan a continuación: 1. Para pequeños valores de KC, los coeficientes hidrodinámicos de masa añadida y amortiguamiento incrementan su valor a medida que el disco se aproxima al fondo marino. Para los casos cuando el disco oscila cerca de la superficie libre, la dependencia de los coeficientes hidrodinámicos es más fuerte por la influencia del movimiento de la superficie libre. 2. Los casos analizados muestran la existencia de un valor crítico de KC, donde la tendencia de los coeficientes hidrodinámicos se ve alterada. Dicho valor crítico depende de la distancia al fondo marino o a la superficie libre. 3. El comportamiento físico del flujo, para valores de KC cercanos a su valor crítico ha sido estudiado mediante el análisis del campo de vorticidad. 4. Introducir porosidad al disco, reduce la masa añadida para los valores de KC estudiados, pero se ha encontrado que la porosidad incrementa el valor del coeficiente de amortiguamiento cuando se incrementa la amplitud del movimiento, logrando un máximo de damping para un disco con 10% de porosidad. 5. Los resultados numéricos y experimentales para los discos con faldón, muestran que usar este tipo de geometrías incrementa la masa añadida cuando se compara con el disco sólido, pero reduce considerablemente el coeficiente de amortiguamiento. 6. Un diseño novedoso de heave plate basado en la teoría fractal ha sido experimentalmente estudiado a diferentes calados y comparado con datos experimentales obtenidos por otro autores. Los resultados muestran un comportamiento incierto de los coeficientes y por tanto este diseño debería ser estudiado más a fondo. ABSTRACT Offshore wind energy is one of the promising resources which can reduce the fossil fuel energy consumption and cover worldwide energy demands. Offshore wind turbine concepts are based on either a fixed structure as a jacket or a floating offshore platform like a semisubmersible, spar or tension leg platform. Floating offshore wind turbines have the potential to be an important part of the energy production profile in the coming years. In order to accomplish this wind integration, these wind turbines need to be made more reliable and cost efficient to be competitive with other sources of energy. Floating offshore artifacts, such oil rings and wind turbines, may experience resonant heave motions in sea states with long peak periods. These heave resonances may increase the system downtime and cause damage on the system components and as well as on risers and mooring systems. The heave resonant response may be reduced by different means: (1) increasing the damping of the system, (2) keeping the natural heave period outside the range of the wave energy, and (3) reducing the heave excitation forces. A typical example to accomplish this reduction are “Heave Plates”. Heave plates are used in the offshore industry due to their hydrodynamic characteristics, i.e., increased added mass and damping. Conventional offshore hydrodynamic analysis considers a structure in waves, and evaluates the linear and nonlinear loads using potential theory. Viscous damping, which is expected to play a crucial role in the resonant response, is an empirical input to the analysis, and is not explicitly calculated. The present research has been mainly focused on the prediction of viscous damping and added mass of floating offshore wind turbine heave plates. In the calculations, the hydrodynamic forces have been measured in order to compute how the hydrodynamic coefficients of added mass1 and damping vary with the KC number, which characterises the amplitude of heave motion relative to the diameter of the disc. In addition, the influence on the hydrodynamic coefficients when the heave plate is oscillating close to the free surface or the seabed has been investigated. In this process, a new model describing the work done by damping in terms of the flow enstrophy, is described herein. This new approach is able to provide a direct correlation between the local vortex shedding processes and the global damping force. The analysis also includes the study of different edges geometry, and examines the sensitivity of the damping and added mass coefficients to the porosity of the plate. A novel porous heave plate based on fractal theory has also been proposed, tested experimentally and compared with experimental data obtained by other authors for plates with similar porosity. A numerical solver of Navier Stokes equations, based on the finite volume technique has been applied. It uses the open-source libraries of OpenFOAM (Open source Field Operation And Manipulation), to solve 2 incompressible, isothermal immiscible fluids using a VOF (volume of fluid) phase-fraction based interface capturing approach, with optional mesh motion and mesh topology changes including adaptive re-meshing. Numerical results have been compared with experiments conducted at Technical University of Madrid (CEHINAV) and CEHIPAR model basins in Madrid and with others performed at School of Mechanical Engineering in The University of Western Australia. A brief summary of main results are presented below: 1. At low KC numbers, a systematic increase in added mass and damping, corresponding to an increase in the seabed proximity, is observed. Specifically, for the cases when the heave plate is oscillating closer to the free surface, the dependence of the hydrodynamic coefficients is strongly influenced by the free surface. 2. As seen in experiments, a critical KC, where the linear trend of the hydrodynamic coefficients with KC is disrupted and that depends on the seabed or free surface distance, has been found. 3. The physical behavior of the flow around the critical KC has been explained through an analysis of the flow vorticity field. 4. The porosity of the heave plates reduces the added mass for the studied porosity at all KC numbers, but the porous heave plates are found to increase the damping coefficient with increasing amplitude of oscillation, achieving a maximum damping coefficient for the heave plate with 10% porosity in the entire KC range. 5. Another concept taken into account in this work has been the heave plates with flaps. Numerical and experimental results show that using discs with flaps will increase added mass when compared to the plain plate but may also significantly reduce damping. 6. A novel heave plate design based on fractal theory has tested experimentally for different submergences and compared with experimental data obtained by other authors for porous plates. Results show an unclear behavior in the coefficients and should be studied further. Future work is necessary in order to address a series of open questions focusing on 3D effects, optimization of the heave plates shapes, etc.

Histograms of oriented gradients for fast on-board vehicle verification

Histograms of Oriented Gradients (HoGs) provide excellent results in object detection and verification. However, their demanding processing requirements bound their applicability in some critical real-time scenarios, such as for video-based on-board vehicle detection systems. In this work, an efficient HOG configuration for pose-based on-board vehicle verification is proposed, which alleviates both the processing requirements and required feature vector length without reducing classification performance. The impact on classification of some critical configuration and processing parameters is in depth analyzed to propose a baseline efficient descriptor. Based on the analysis of its cells contribution to classification, new view-dependent cell-configuration patterns are proposed, resulting in reduced descriptors which provide an excellent balance between performance and computational requirements, rendering higher verification rates than other works in the literature.

Modelado y Evaluación de Entornos Virtuales Interactivos para Rehabilitación Cognitiva en Daño Cerebral

El Daño Cerebral (DC) se refiere a cualquier lesión producida en el cerebro y que afecta a su funcionalidad. Se ha convertido en una de las principales causas de discapacidad neurológica de las sociedades desarrolladas. Hasta la más sencilla de las actividades y acciones que realizamos en nuestro día a día involucran a los procesos cognitivos. Por ello, la alteración de las funciones cognitivas como consecuencia del DC, limita no sólo la calidad de vida del paciente sino también la de las persona de su entorno. La rehabilitación cognitiva trata de aumentar la autonomía y calidad de vida del paciente minimizando o compensando los desórdenes funciones causados por el episodio de DC. La plasticidad cerebral es una propiedad intrínseca al sistema nervioso humano por la que en función a la experiencia se crean nuevos patrones de conectividad. El propósito de la neurorrehabilitación es precisamente modular esta propiedad intrínseca a partir de ejercicios específicos, los cuales podrían derivar en la recuperación parcial o total de las funciones afectadas. La incorporación de la tecnología a las terapias de rehabilitación ha permitido desarrollar nuevas metodologías de trabajo. Esto ha ayudado a hacer frente a las dificultades de la rehabilitación que los procesos tradicionales no logran abarcar. A pesar del gran avance realizado en los Ãoltimos años, todavía existen debilidades en el proceso de rehabilitación; por ejemplo, la trasferencia a la vida real de las habilidades logradas durante la terapia de rehabilitación, así como su generalización a otras actividades cotidianas. Los entornos virtuales pueden reproducir situaciones cotidianas. Permiten simular, de forma controlada, los requisitos conductuales que encontramos en la vida real. En un contexto terapéutico, puede ser utilizado por el neuropsicólogo para corregir en el paciente comportamientos patológicos no deseados, realizar intervenciones terapéuticas sobre Actividades de Vida Diaria que estimulen conductas adaptativas. A pesar de que las tecnologías actuales tienen potencial suficiente para aportar nuevos beneficios al proceso de rehabilitación, existe cierta reticencia a su incorporación a la clínica diaria. A día de hoy, no se ha podido demostrar que su uso aporte una mejorar significativa con respecto a otro tipo de intervención; en otras palabras, no existe evidencia científica de la eficacia del uso de entornos virtuales interactivos en rehabilitación. En este contexto, la presente Tesis Doctoral trata de abordar los aspectos que mantienen a los entornos virtuales interactivos al margen de la rutina clínica diaria. Se estudian las diferentes etapas del proceso de rehabilitación cognitiva relacionado con la integración y uso de estos entornos: diseño de las actividades, su implementación en el entorno virtual, y finalmente la ejecución por el paciente y análisis de los respectivos datos. Por tanto, los bloques en los que queda dividido el trabajo de investigación expuesto en esta memoria son: 1. Diseño de las AVD. La definición y configuración de los elementos que componen la AVD permite al terapeuta diseñar estrategias de intervención terapéutica para actuar sobre el comportamiento del paciente durante la ejecución de la actividad. En esta parte de la tesis se pretende formalizar el diseño de las AVD de tal forma que el terapeuta pueda explotar el potencial tecnológico de los entornos virtuales interactivos abstrayéndose de la complejidad implícita a la tecnología. Para hacer viable este planteamiento se propone una metodología que permita modelar la definición de las AVD, representar el conocimiento implícito en ellas, y asistir al neuropsicólogo durante el proceso de diseño de la intervención clínica. 2. Entorno virtual interactivo. El gran avance tecnológico producido durante los Ãoltimos años permite reproducir AVD interactivas en un contexto de uso clínico. El objetivo perseguido en esta parte de la Tesis es el de extraer las características potenciales de esta solución tecnológica y aplicarla a las necesidades y requisitos de la rehabilitación cognitiva. Se propone el uso de la tecnología de Vídeo Interactivo para el desarrollo de estos entornos virtuales. Para la evaluación de la misma se realiza un estudio experimental dividido en dos fases con la participación de sujetos sanos y pacientes, donde se valora su idoneidad para ser utilizado en terapias de rehabilitación cognitiva. 3. Monitorización de las AVD. El uso de estos entornos virtuales interactivos expone al paciente ante una gran cantidad de estímulos e interacciones. Este hecho requiere de instrumentos de monitorización avanzado que aporten al terapeuta información objetiva sobre el comportamiento del paciente, lo que le podría permitir por ejemplo evaluar la eficacia del tratamiento. En este apartado se propone el uso de métricas basadas en la atención visual y la interacción con el entorno para conocer datos sobre el comportamiento del paciente durante la AVD. Se desarrolla un sistema de monitorización integrado con el entorno virtual que ofrece los instrumentos necesarios para la evaluación de estas métricas para su uso clínico. La metodología propuesta ha permitido diseñar una AVD basada en la definición de intervenciones terapéuticas. Posteriormente esta AVD has sido implementada mediante la tecnología de vídeo interactivo, creando así el prototipo de un entorno virtual para ser utilizado por pacientes con déficit cognitivo. Los resultados del estudio experimental mediante el cual ha sido evaluado demuestran la robustez y usabilidad del sistema, así como su capacidad para intervenir sobre el comportamiento del paciente. El sistema monitorización que ha sido integrado con el entorno virtual aporta datos objetivos sobre el comportamiento del paciente durante la ejecución de la actividad. Los resultados obtenidos permiten contrastar las hipótesis de investigación planteadas en la Tesis Doctoral, aportando soluciones que pueden ayudar a la integración de los entornos virtuales interactivos en la rutina clínica. Esto abre una nueva vía de investigación y desarrollo que podría suponer un gran progreso y mejora en los procesos de neurorrehabilitación cognitiva en daño cerebral. ABSTRACT Brain injury (BI) refers to medical conditions that occur in the brain, altering its function. It becomes one of the main neurological disabilities in the developed society. Cognitive processes determine individual performance in Activities of Daily Living (ADL), thus, the cognitive disorders after BI result in a loss of autonomy and independence, affecting the patient’s quality of life. Cognitive rehabilitation seeks to increase patients’ autonomy and quality of life minimizing or compensating functional disorders showed by BI patients. Brain plasticity is an intrinsic property of the human nervous system whereby its structure is changed depending on experience. Neurorehabilitation pursuits a precise modulation of this intrinsic property, based on specific exercises to induce functional changes, which could result in partial or total recovery of the affected functions. The new methodologies that can be approached by applying technologies to the rehabilitation process, permit to deal with the difficulties which are out of the scope of the traditional rehabilitation. Despite this huge breakthrough, there are still weaknesses in the rehabilitation process, such as the transferring to the real life those skills reached along the therapy, and its generalization to others daily activities. Virtual environments reproduce daily situations. Behavioural requirements which are similar to those we perceive in real life, are simulated in a controlled way. In these virtual environments the therapist is allowed to interact with patients without even being present, inhibiting unsuitable behaviour patterns, stimulating correct answers throughout the simulation and enhancing stimuli with supplementary information when necessary. Despite the benefits which could be brought to the cognitive rehabilitation by applying the potential of the current technologies, there are barriers for widespread use of interactive virtual environments in clinical routine. At present, the evidence that these technologies bring a significant improvement to the cognitive therapies is limited. In other words, there is no evidence about the efficacy of using virtual environments in rehabilitation. In this context, this work aims to address those issues which keep the virtual environments out of the clinical routine. The stages of the cognitive rehabilitation process, which are related with the use and integration of these environments, are analysed: activities design, its implementation in the virtual environment, and the patient’s performance and the data analysis. Hence, the thesis is comprised of the main chapters that are listed below: 1. ADL Design.Definition and configuration of the elements which comprise the ADL allow the therapist to design intervention strategies to influence over the patient behaviour along the activity performance. This chapter aims to formalise the AVD design in order to help neuropsychologists to make use of the interactive virtual environments’ potential but isolating them from the complexity of the technology. With this purpose a new methodology is proposed as an instrument to model the ADL definition, to manage its implied knowledge and to assist the clinician along the design process of the therapeutic intervention. 2. Interactive virtual environment. Continuous advancements make the technology feasible for re-creating rehabilitation therapies based on ADL. The goal of this stage is to analyse the main features of virtual environments in order to apply them according to the cognitive rehabilitation’s requirements. The interactive video is proposed as the technology to develop virtual environments. Experimental study is carried out to assess the suitability of the interactive video to be used by cognitive rehabilitation. 3. ADL monitoring system. This kind of virtual environments bring patients in front lots of stimuli and interactions. Thus, advanced monitoring instruments are needed to provide therapist with objective information about patient’s behaviour. This thesis chapter propose the use of metrics rely on visual patients’ visual attention and their interactions with the environment. A monitoring system has been developed and integrated with the interactive video-based virtual environment, providing neuropsychologist with the instruments to evaluate the clinical force of this metrics. Therapeutic interventions-based ADL has been designed by using the proposed methodology. Interactive video technology has been used to develop the ADL, resulting in a virtual environment prototype to be use by patients who suffer a cognitive deficits. An experimental study has been performed to evaluate the virtual environment, whose overcomes show the usability and solidity of the system, and also its capacity to have influence over patient’s behaviour. The monitoring system, which has been embedded in the virtual environment, provides objective information about patients’ behaviour along their activity performance. Research hypothesis of the Thesis are proven by the obtained results. They could help to incorporate the interactive virtual environments in the clinical routine. This may be a significant step forward to enhance the cognitive neurorehabilitation processes in brain injury.