Estimation of local forest attributes, utilizing two-phase sampling and auxiliary data

This thesis examines the feasibility of a forest inventory method based on two-phase sampling in estimating forest attributes at the stand or substand levels for forest management purposes. The method is based on multi-source forest inventory combining auxiliary data consisting of remote sensing imagery or other geographic information and field measurements. Auxiliary data are utilized as first-phase data for covering all inventory units. Various methods were examined for improving the accuracy of the forest estimates. Pre-processing of auxiliary data in the form of correcting the spectral properties of aerial imagery was examined (I), as was the selection of aerial image features for estimating forest attributes (II). Various spatial units were compared for extracting image features in a remote sensing aided forest inventory utilizing very high resolution imagery (III). A number of data sources were combined and different weighting procedures were tested in estimating forest attributes (IV, V). Correction of the spectral properties of aerial images proved to be a straightforward and advantageous method for improving the correlation between the image features and the measured forest attributes. Testing different image features that can be extracted from aerial photographs (and other very high resolution images) showed that the images contain a wealth of relevant information that can be extracted only by utilizing the spatial organization of the image pixel values. Furthermore, careful selection of image features for the inventory task generally gives better results than inputting all extractable features to the estimation procedure. When the spatial units for extracting very high resolution image features were examined, an approach based on image segmentation generally showed advantages compared with a traditional sample plot-based approach. Combining several data sources resulted in more accurate estimates than any of the individual data sources alone. The best combined estimate can be derived by weighting the estimates produced by the individual data sources by the inverse values of their mean square errors. Despite the fact that the plot-level estimation accuracy in two-phase sampling inventory can be improved in many ways, the accuracy of forest estimates based mainly on single-view satellite and aerial imagery is a relatively poor basis for making stand-level management decisions.

Habitat use and population dynamics of brown bears (Ursus arctos) in Scandinavia

Large carnivore populations are currently recovering from past extirpation efforts and expanding back into their original habitats. At the same time human activities have resulted in very few wilderness areas left with suitable habitats and size large enough to maintain populations of large carnivores without human contact. Consequently the long-term future of large carnivores depends on their successful integration into landscapes where humans live. Thus, understanding their behaviour and interaction with surrounding habitats is of utmost importance in the development of management strategies for large carnivores. This applies also to brown bears (Ursus arctos) that were almost exterminated from Scandinavia and Finland at the turn of the century, but are now expanding their range with the current population estimates being approximately 2600 bears in Scandinavia and 840 in Finland. This thesis focuses on the large-scale habitat use and population dynamics of brown bears in Scandinavia with the objective to develop modelling approaches that support the management of bear populations. Habitat analysis shows that bear home ranges occur mainly in forested areas with a low level of human influence relative to surrounding areas. Habitat modelling based on these findings allows identification and quantification of the potentially suitable areas for bears in Scandinavia. Additionally, this thesis presents novel improvements to home range estimation that enable realistic estimates of the effective area required for the bears to establish a home range. This is achieved through fitting to the radio-tracking data to establish the amount of temporal autocorrelation and the proportion of time spent in different habitat types. Together these form a basis for the landscape-level management of the expanding population. Successful management of bears requires also assessment of the consequences of harvest on the population viability. An individual-based simulation model, accounting for the sexually selected infanticide, was used to investigate the possibility of increasing the harvest using different hunting strategies, such as trophy harvest of males. The results indicated that the population can sustain twice the current harvest rate. However, harvest should be changed gradually while carefully monitoring the population growth as some effects of increased harvest may manifest themselves only after a time-delay. The results and methodological improvements in this thesis can be applied to the Finnish bear population and to other large carnivores. They provide grounds for the further development of spatially-realistic management-oriented models of brow bear dynamics that can make projections of the future distribution of bears while accounting for the development of human activities.

Maidontuottajatila ja ravinnepolitiikka: Tilan toimintamekanismit, politiikan tarve ja ohjauskeinojen vaikuttavuus

Tutkielman tarkoituksena on rakentaa malli, jolla voidaan arvioida maitotilan toimintaa monipuolisesti ravinnehuuhtouman kannalta. Tavoitteena on ennen muuta analyyttinen tarkastelu siten, että kuitenkin huomioiden maidontuotannon ominaispiirteet, keskeisinä esimerkkeinä ravinnon, maidontuotannon ja lannan ominaisuuksien väliset riippuvuudet. Analyysissa tarkastellaan tilanomistajan yksityisen hyödynmaksimoinnin ja yhteiskunnan tavoitteiden eroavaisuutta. Lisäksi johdetaan optimaaliset ohjauskeinot ja arvioidaan eräiden yksinkertaisten ohjauskeinojen vaikuttavuutta. Mallin analysoinnin perusteella yksityinen ja yhteiskunnallinen optimiratkaisu eroavat toisistaan kaikkien päätösmuuttujien osalta. Ei voida kuitenkaan yleispätevästi sanoa muutosten merkittävyyttä tai suuntaa ottamatta kantaa mallin funktiomuotoihin ja parametriarvoihin. Optimaaliset ohjauskeinot tulisi asettaa keinolannoitteen ja lannan levitykselle, väkirehuruokinnalle ja säilörehun viljelylle, mutta ei eläinten määrälle. Toisaalta optimaaliset ohjauskeinot ovat hyvin monimutkaisia. Tarkasteltujen yksinkertaisempien ohjauskeinojen vaikuttavuutta ei voida tarkasti arvioida analyyttisella tasolla. Numeeristen tulosten perusteella yhteiskunnallisessa optimissa eläinmäärä olisi hieman yksityistä optimia pienempi, väkirehun käyttö vähäisempää, enemmän peltoa allokoitaisiin säilörehun viljelyyn ja lannoitustasot olisivat kautta linjan hieman pienemmät. Lannanlevitykset eroavat etäisyyden suhteen: molemmissa tapauksissa lannanlevityksen intensiteetti kasvaa kohti tilan keskusta kuljettaessa, mutta yksityisessä optimissa lähimmälle pellolle dumpataan kaikki ylimääräinen lanta, kun taas yhteiskunnallisessa optimissa lanta levitetään tasaisemmin eri pelloille. Ero kokonaishyvinvoinnissa jää pieneksi, mutta eläinmäärän kasvu kärjistäisi lannan dumppauksen aiheuttamia huuhtoumahaittoja. Yksinkertaisista ohjauskeinoista lannoitusrajoitus sekä ravinne- ja keinolannoitevero osoittautuivat kohtalaisen käyttökelpoisiksi numeeristen tulosten perusteella. Sen sijaan eläinmäärän rajoittaminen ja lannan kuljetuskustannuksia kompensoivat tuet vaikuttavat tulosten perusteella huonoilta ratkaisuilta.

Activity Recognition in Egocentric Life-Logging Videos

With the increasing availability of wearable cameras, research on first-person view videos (egocentric videos) has received much attention recently. While some effort has been devoted to collecting various egocentric video datasets, there has not been a focused effort in assembling one that could capture the diversity and complexity of activities related to life-logging, which is expected to be an important application for egocentric videos. In this work, we first conduct a comprehensive survey of existing egocentric video datasets. We observe that existing datasets do not emphasize activities relevant to the life-logging scenario. We build an egocentric video dataset dubbed LENA (Life-logging EgoceNtric Activities) (http://people.sutd.edu.sg/similar to 1000892/dataset) which includes egocentric videos of 13 fine-grained activity categories, recorded under diverse situations and environments using the Google Glass. Activities in LENA can also be grouped into 5 top-level categories to meet various needs and multiple demands for activities analysis research. We evaluate state-of-the-art activity recognition using LENA in detail and also analyze the performance of popular descriptors in egocentric activity recognition.

Towards a participatory integrated assessment approach for planning and managing Natura 2000 network sites

Managing protected areas implies dealing with complex social-ecological systems where multiple dimensions (social, institutional, economic and ecological) interact over time for the delivery of ecosystem services. Uni-dimensional and top-down management approaches have been unable to capture this complexity. Instead, new integrated approaches that acknowledge the diversity of social actors in the decision making process are required. In this paper we put forward a novel participatory assessment approach which integrates multiple methodologies to reflect different value articulating institutions in the case of a Natura 2000 network site in the Basque Country. It integrates within a social multi-criteria evaluation framework, both the economic values of ecosystem services through a choice experiment model and ecological values by means of a spatial bio-geographic assessment. By capturing confronting social and institutional conflicts in protected areas the participatory integrated assessment approach presented here can help decision makers for better planning and managing Natura 2000 sites.

Towards a Participatory Integrated Assessment Approach for Planning and Managing Natura 2000 Network Sites

36 p.

Análise do cuidado em saúde na atenção básica em Piraí - RJ

A Estratégia de Saúde da Família é um dos movimentos adotados pelo Brasil para o alcance da universalidade de acesso aos serviços de saúde em todos os níveis de assistência, integralidade da atenção, preservação da autonomia, igualdade da assistência, direito à informação e participação da comunidade. Com a reorganização da prática assistencial, são esperados maior resolubilidade, vínculo, acesso e continuidade da atenção, através de equipe multidisciplinar. Diversos autores vêm-se debruçando na análise da adequação desse modelo com o cuidado em saúde e sua contribuição para o bom êxito do atendimento aos indivíduos, aliviando seus sofrimentos. O município de Piraí adotou esse modelo para 100% de sua população, em 2002. Este estudo tem por objetivo analisar o cuidado oferecido no município, na perspectiva teórica da integralidade, utilizando como condição traçadora o diabetes mellitus, descrevendo o desenvolvimento do atendimento e analisando o processo de trabalho à luz dos protocolos e normas recomendadas, assim como o cuidado na perspectiva do usuário. Foram realizadas entrevistas com profissionais que atuam há pelo menos três anos na mesma unidade e com usuários cadastrados minimamente por um ano, excluindo-se aqueles com quadros mais graves. Foi utilizado instrumento padronizado e elaborado com intenção de promover relatos sobre acesso, acolhimento, vínculo-responsabilização, coordenação de cuidado, uso de protocolos, resolubilidade, autonomia e percepção de cuidado pelo paciente em três unidades da estratégia de Piraí. A partir da análise dos resultados, observamos que o acesso aos serviços de saúde qualifica a atenção, por meio do atendimento personalizado e acolhedor, percebido a partir de relatos sobre o agendamento de 1 consulta, consulta subsequente, atendimento de emergência, acesso via telefone e priorização da população que reside em locais mais distantes da unidade. Com relação ao vínculo, os usuários reconhecem as profissionais que trabalham nas unidades, o que aproxima a equipe dos usuários e contribui para o estabelecimento de relações de longa duração e efetividade da atenção. Percebe-se a responsabilidade com a vida do paciente e o foco do trabalho no indivíduo. Os usuários mantêm uma relação de confiança. Buscar autonomia destes através da promoção de trabalhos em grupos e visitas domiciliares é uma realidade, muito embora nos pareça que existe uma dificuldade de superar a transmissão de informações, pela troca de experiências, ou mesmo de entender a forma de pensar do paciente em relação a sua condição de saúde, buscando habilidades para lidar com a situação. Isso faz com que o desenvolvimento de uma organização rotineira de grupos seja algo em que a equipe encontra dificuldades. À luz dos protocolos, são constatadas a busca ativa e a realização adequada com relação ao número e aprazamento das consultas médicas. No entanto, o registro no prontuário foi um problema detectado. O cuidado ao paciente, a partir dos registros, é desenvolvido principalmente pelo profissional médico. A avaliação por parte de outras categorias profissionais de nível superior é pouco expressa. Do ponto de vista biológico, as metas estabelecidas em protocolo para os usuários são atingidas por um número restrito de usuários. Essas situações demonstram a necessidade de investimentos que favoreçam a superação desses desafios.

Managing without measuring: A study of an electricity distribution company

Purpose: The purpose of this paper is to present an exception to the common belief "If you can't measure it, you can't manage it". It aims to show how in certain situations particular practices, attitudes and cultures can remove the need for individual performance measurement. Design/methodology/approach: First, the paper identifies the usual roles of performance measurement in managing individual employees as described by control and motivation theorists. Second, it identifies a market-leading organisation where managers deliberately refuse to use their top-level performance measurement system to manage the performance of individual employees. A case study is carried out to test what non-measurement mechanisms fulfil the roles of individual performance measurement in this organisation. Findings: Building on situations observed at this company, a set of possible characteristics of companies that do not require formalised individual performance measurement systems in order to achieve high performance standards is put forward. Practical implications: Managers should not always assume that individual performance measurement is the only way to achieve excellent performance. This study shows that, by granting responsibilities and providing appropriate support, managers can channel workers' enhanced motivation towards meeting wider organisational goals. Originality/value: This work broadens the understanding of how excellent performance can be achieved. It shows that excellence can be achieved through practices based on shared values linked to motivation, trust, and a common sense of mission, without the need to install individual performance measurement systems based on cybernetic principles. © Emerald Group Publishing Limited.

Toward automated generation of parametric BIMs based on hybrid video and laser scanning data

Only very few constructed facilities today have a complete record of as-built information. Despite the growing use of Building Information Modelling and the improvement in as-built records, several more years will be required before guidelines that require as-built data modelling will be implemented for the majority of constructed facilities, and this will still not address the stock of existing buildings. A technical solution for scanning buildings and compiling Building Information Models is needed. However, this is a multidisciplinary problem, requiring expertise in scanning, computer vision and videogrammetry, machine learning, and parametric object modelling. This paper outlines the technical approach proposed by a consortium of researchers that has gathered to tackle the ambitious goal of automating as-built modelling as far as possible. The top level framework of the proposed solution is presented, and each process, input and output is explained, along with the steps needed to validate them. Preliminary experiments on the earlier stages (i.e. processes) of the framework proposed are conducted and results are shown; the work toward implementation of the remainder is ongoing.

Biologically Inspired Tensor Features

According to the research results reported in the past decades, it is well acknowledged that face recognition is not a trivial task. With the development of electronic devices, we are gradually revealing the secret of object recognition in the primate's visual cortex. Therefore, it is time to reconsider face recognition by using biologically inspired features. In this paper, we represent face images by utilizing the C1 units, which correspond to complex cells in the visual cortex, and pool over S1 units by using a maximum operation to reserve only the maximum response of each local area of S1 units. The new representation is termed C1 Face. Because C1 Face is naturally a third-order tensor (or a three dimensional array), we propose three-way discriminative locality alignment (TWDLA), an extension of the discriminative locality alignment, which is a top-level discriminate manifold learning-based subspace learning algorithm. TWDLA has the following advantages: (1) it takes third-order tensors as input directly so the structure information can be well preserved; (2) it models the local geometry over every modality of the input tensors so the spatial relations of input tensors within a class can be preserved; (3) it maximizes the margin between a tensor and tensors from other classes over each modality so it performs well for recognition tasks and (4) it has no under sampling problem. Extensive experiments on YALE and FERET datasets show (1) the proposed C1Face representation can better represent face images than raw pixels and (2) TWDLA can duly preserve both the local geometry and the discriminative information over every modality for recognition.

Secure architectures for pairing based public key cryptography

Along with the growing demand for cryptosystems in systems ranging from large servers to mobile devices, suitable cryptogrophic protocols for use under certain constraints are becoming more and more important. Constraints such as calculation time, area, efficiency and security, must be considered by the designer. Elliptic curves, since their introduction to public key cryptography in 1985 have challenged established public key and signature generation schemes such as RSA, offering more security per bit. Amongst Elliptic curve based systems, pairing based cryptographies are thoroughly researched and can be used in many public key protocols such as identity based schemes. For hardware implementions of pairing based protocols, all components which calculate operations over Elliptic curves can be considered. Designers of the pairing algorithms must choose calculation blocks and arrange the basic operations carefully so that the implementation can meet the constraints of time and hardware resource area. This thesis deals with different hardware architectures to accelerate the pairing based cryptosystems in the field of characteristic two. Using different top-level architectures the hardware efficiency of operations that run at different times is first considered in this thesis. Security is another important aspect of pairing based cryptography to be considered in practically Side Channel Analysis (SCA) attacks. The naively implemented hardware accelerators for pairing based cryptographies can be vulnerable when taking the physical analysis attacks into consideration. This thesis considered the weaknesses in pairing based public key cryptography and addresses the particular calculations in the systems that are insecure. In this case, countermeasures should be applied to protect the weak link of the implementation to improve and perfect the pairing based algorithms. Some important rules that the designers must obey to improve the security of the cryptosystems are proposed. According to these rules, three countermeasures that protect the pairing based cryptosystems against SCA attacks are applied. The implementations of the countermeasures are presented and their performances are investigated.

Estimation of in-canopy ammonia sources and sinks in a fertilized Zea mays field.

An analytical model was developed to describe in-canopy vertical distribution of ammonia (NH(3)) sources and sinks and vertical fluxes in a fertilized agricultural setting using measured in-canopy mean NH(3) concentration and wind speed profiles. This model was applied to quantify in-canopy air-surface exchange rates and above-canopy NH(3) fluxes in a fertilized corn (Zea mays) field. Modeled air-canopy NH(3) fluxes agreed well with independent above-canopy flux estimates. Based on the model results, the urea fertilized soil surface was a consistent source of NH(3) one month following the fertilizer application, whereas the vegetation canopy was typically a net NH(3) sink with the lower portion of the canopy being a constant sink. The model results suggested that the canopy was a sink for some 70% of the estimated soil NH(3) emissions. A logical conclusion is that parametrization of within-canopy processes in air quality models are necessary to explore the impact of agricultural field level management practices on regional air quality. Moreover, there are agronomic and environmental benefits to timing liquid fertilizer applications as close to canopy closure as possible. Finally, given the large within-canopy mean NH(3) concentration gradients in such agricultural settings, a discussion about the suitability of the proposed model is also presented.

Efficient FPGA Hardware Development: A Multi-Language Approach

This paper presents a multi-language framework to FPGA hardware development which aims to satisfy the dual requirement of high-level hardware design and efficient hardware implementation. The central idea of this framework is the integration of different hardware languages in a way that harnesses the best features of each language. This is illustrated in this paper by the integration of two hardware languages in the form of HIDE: a structured hardware language which provides more abstract and elegant hardware descriptions and compositions than are possible in traditional hardware description languages such as VHDL or Verilog, and Handel-C: an ANSI C-like hardware language which allows software and hardware engineers alike to target FPGAs from high-level algorithmic descriptions. On the one hand, HIDE has proven to be very successful in the description and generation of highly optimised parameterisable FPGA circuits from geometric descriptions. On the other hand, Handel-C has also proven to be very successful in the rapid design and prototyping of FPGA circuits from algorithmic application descriptions. The proposed integrated framework hence harnesses HIDE for the generation of highly optimised circuits for regular parts of algorithms, while Handel-C is used as a top-level design language from which HIDE functionality is dynamically invoked. The overall message of this paper posits that there need not be an exclusive choice between different hardware design flows. Rather, an integrated framework where different design flows can seamlessly interoperate should be adopted. Although the idea might seem simple prima facie, it could have serious implications on the design of future generations of hardware languages.

Phenomenology and system engineering of micro- and nano-antenna FPA sensors for detection of concealed weapons and improvised explosive devices

The ability of millimetre wave and terahertz systems to penetrate clothing is well known. The fact that the transmission of clothing and the reflectivity of the body vary as a function of frequency is less so. Several instruments have now been developed to exploit this capability. The choice of operating frequency, however, has often been associated with the maturity and the cost of the enabling technology rather than a sound systems engineering approach. Top level user and systems requirements have been derived to inform the development of design concepts. Emerging micro and nano technology concepts have been reviewed and we have demonstrated how these can be evaluated against these requirements by simulation using OpenFx. Openfx is an open source suite of 3D tools for modeling, animation and visualization which has been modified for use at millimeter waves. © 2012 SPIE.

Conservation status and reproduction of the critically endangered freshwater pearl mussel (Margaritifera margaritifera).

1. Freshwater unionoids are one of the most threatened animal groups worldwide and the freshwater pearl mussel Margaritifera margaritifera is currently listed as critically endangered in Europe. The ‘EC Habitats & Species Directive’ requires that EU member states monitor the distribution and abundance of this species and report regularly on its conservation status.
2. The pearl mussel meta-population in Northern Ireland was surveyed to assess temporal population trends in Special Areas of Conservation (SACs) and mussel reproduction throughout its range.
3. Mussels occurred in six rivers and numbers within three SAC designated sites remained stable between 2004-07 and 2011. The discovery of >8,000 previously unknown individuals in the Owenreagh River contributed to an overall increase (+56.8%) in the total known population. All populations actively reproduced during 2010 with approximately half of all individuals gravid. Moreover, suitable salmonid hosts occurred at all sites with 10.7% of salmon and 22.8% of trout carrying encysted glochidia. Populations were composed entirely of aged individuals with little evidence of recent recruitment.
4. We infer that the break in the life cycle must occur during the juvenile stage when glochidia metamorphose and settle into the interstitial spaces within the substrate. Water quality parameters, most notably levels of suspended solids, exceeded the recommended maximum thresholds in all rivers.
5. We posit that the deposition of silt may be the main cause of juvenile mortality contributing to a lack of recruitment. Consequently, all populations were judged to be in ‘unfavourable’ conservation status. Catchment-level management plans are urgently needed to reduce siltation with the aim of improving recruitment. Our results have implications for the success of ex-situ conservation programmes; specifically, the size at which captive bred juveniles are released into the wild. Further research is required to assess the vulnerabilities of early life stages of M. margaritifera to siltation.