The Flexural Fatigue Strength of Prestressed Steel I-Beams, HR-73, 1962

The purpose of this investigation was to study the flexural fatigue strength of two prestressed steel I-beams which had previously been fabricated in connection with a jointly sponsored project under the auspices of the Iowa State Highway Commission. The beams were prestressed by deflecting them under the action of a concentrated load at the center of a simple span, then welding unstressed high strength steel plates to the top and bottom flanges to retain a predetermined amount of prestress. The beams were rolled sections of A36 steel and the plates were USS "T-1" steel. Each of the two test specimens were subjected to an identical repeated loading until a fatigue failure occurred. The loading was designed to produce stresses equivalent to those which would have occurred in a simulated bridge and amounted to 84 percent of a standard H-15 live load including impact. One of the beams sustained 2,469,100 repetitions of load to failure and the other sustained 2,756,100 cycles. Following the fatigue tests, an experimental study was made to determine the state of stress that had been retained in the prestressed steel beams. This information, upon which the calculated stresses of the test could be superimposed, provided a method of correlating the fatigue strength of the beams with the fatigue information available on the two steels involved.

Effects of erythropoietin on muscle O2 transport during exercise in patients with chronic renal failure.

Erythropoietin (rHuEPO) has proven to be effective in the treatment of anemia of chronic renal failure (CRF). Despite improving the quality of life, peak oxygen uptake after rHuEPO therapy is not improved as much as the increase in hemoglobin concentration ([Hb)] would predict. We hypothesized that this discrepancy is due to failure of O2 transport rates to rise in a manner proportional to [Hb]. To test this, eight patients with CRF undergoing regular hemodialysis were studied pre- and post-rHuEPO ([Hb] = 7.5 +/- 1.0 vs. 12.5 +/- 1.0 g x dl-1) using a standard incremental cycle exercise protocol. A group of 12 healthy sedentary subjects of similar age and anthropometric characteristics served as controls. Arterial and femoral venous blood gas data were obtained and coupled with simultaneous measurements of femoral venous blood flow (Qleg) by thermodilution to obtain O2 delivery and oxygen uptake (VO2). Despite a 68% increase in [Hb], peak VO2 increased by only 33%. This could be explained largely by reduced peak leg blood flow, limiting the gain in O2 delivery to 37%. At peak VO2, after rHuEPO, O2 supply limitation of maximal VO2 was found to occur, permitting the calculation of a value for muscle O2 conductance from capillary to mitochondria (DO2). While DO2 was slightly improved after rHuEPO, it was only 67% of that of sedentary control subjects. This kept maximal oxygen extraction at only 70%. Two important conclusions can be reached from this study. First, the increase in [Hb] produced by rHuEPO is accompanied by a significant reduction in peak blood flow to exercising muscle, which limits the gain in oxygen transport. Second, even after restoration of [Hb], O2 conductance from the muscle capillary to the mitochondria remains considerably below normal.

Rockfall detection from LIDAR point clouds: A clustering approach using R

The analysis of rockfall characteristics and spatial distribution is fundamental to understand and model the main factors that predispose to failure. In our study we analysed LiDAR point clouds aiming to: (1) detect and characterise single rockfalls; (2) investigate their spatial distribution. To this end, different cluster algorithms were applied: 1a) Nearest Neighbour Clutter Removal (NNCR) in combination with the Expectation?Maximization (EM) in order to separate feature points from clutter; 1b) a density based algorithm (DBSCAN) was applied to isolate the single clusters (i.e. the rockfall events); 2) finally we computed the Ripley's K-function to investigate the global spatial pattern of the extracted rockfalls. The method allowed proper identification and characterization of more than 600 rockfalls occurred on a cliff located in Puigcercos (Catalonia, Spain) during a time span of six months. The spatial distribution of these events proved that rockfall were clustered distributed at a welldefined distance-range. Computations were carried out using R free software for statistical computing and graphics. The understanding of the spatial distribution of precursory rockfalls may shed light on the forecasting of future failures.

Calculation of the critical crack size for cold form rectangular hollow section tube (CRHS) under bending load at -40º C temperature

To predict the capacity of the structure or the point which is followed by instability, calculation of the critical crack size is important. Structures usually contain several cracks but not necessarily all of these cracks lead to failure or reach the critical size. So, defining the harmful cracks or the crack size which is the most leading one to failure provides criteria for structure’s capacity at elevated temperature. The scope of this thesis was to calculate fracture parameters like stress intensity factor, the J integral and plastic and ultimate capacity of the structure to estimate critical crack size for this specific structure. Several three dimensional (3D) simulations using finite element method by Ansys program and boundary element method by Frank 3D program were carried out to calculate fracture parameters and results with the aid of laboratory tests (loaddisplacement curve, the J resistance curve and yield or ultimate stress) leaded to extract critical size of the crack. Two types of the fracture which is usually affected by temperature, Elastic and Elasti-Plastic fractures were simulated by performing several linear elastic and nonlinear elastic analyses. Geometry details of the weldment; flank angle and toe radius were also studied independently to estimate the location of crack initiation and simulate stress field in early stages of crack extension in structure. In this work also overview of the structure’s capacity in room temperature (20 ºC) was studied. Comparison of the results in different temperature (20 ºC and -40 ºC) provides a threshold of the structure’s behavior within the defined range.

Challenges in scaling agile software development in offshoring environment

Corporate decision to scale Agile Software development methodologies in offshoring environment has been obstructed due to possible challenges in scaling agile as agile methodologies are regarded to be suitable for small project and co-located team only. Although model such as Agile Scaling Model (ASM) has been developed for scaling Agile with different factors, inabilities of companies to figure out challenges and addressing them lead to failure of project rather than gaining the benefits of using agile methodologies. This failure can be avoided, when scaling agile in IT offshoring environment, by determining key challenges associated in scaling agile in IT offshoring environment and then preparing strategies for addressing those key challenges. These key challenges in scaling agile with IT offshoring environment can be determined by studying issues related with Offshoring and Agile individually and also considering the positive impact of agile methodology in offshoring environment. Then, possible strategies to tackle these key challenges are developed according to the nature of individual challenges and utilizing the benefits of different agile methodologies to address individual situation. Thus, in this thesis, we proposed strategy of using hybrid agile method, which is increasing trend due to adaptive nature of Agile. Determination of the key challenges and possible strategies for tackling those challenges are supported with the survey conducted in the researched organization.

Induction of labor with titrated oral misoprostol solution versus oxytocin in term pregnancy: randomized controlled trial

PURPOSE: To evaluate the effectiveness and the safety of orally administered misoprostol in comparison to intravenously infused oxytocin for labor induction in term pregnant women. METHODS: Between 2008 and 2010, a total of 285 term pregnant women whom were candidate for vaginal delivery were assessed for eligibility to enter the study. Twenty five patients were excluded for different reasons; and 260 included women were randomly assigned to one of the two groups according to the method of treatment, misoprostol or oxytocin. The misoprostol group received 25 µg every 2 hours for up to 24 hours for induction. The oxytocin group received an infusion of 10 IU which was gradually increased. The time from induction to delivery and induction to the beginning of the active phase and successful inductions within 12, 18, and 24 hours were recorded. The trial is registered at irct.ir, number IRCT2012061910068N1. RESULTS: Failure of induction, leading to caesarean section was around 38.3% in the oxytocin group and significantly higher than that of the misoprostol group (20.3%) (p<0.001). Despite the more prevalent failure in the oxytocin group, the mean time intervals from induction to active phase and labor of this group were both significantly less than the misoprostol group (10.1±6.1 and 13.2±7.7 versus 12.9±5.4 and 15.6±5.1 hours respectively, both p-values were <0.05). Maternal and fetal complications were comparable between groups except gastrointestinal symptoms which were encountered more frequently in the misoprostol (10.9 versus 3.9%, p=0.03). CONCLUSIONS: Misoprostol is a safe and effective drug with low complications for the induction of labor. Failure is seen less with misoprostol and caesarean sections are less frequently indicated as compared to oxytocin.

The effect of timing temporary cements to treat induced pulp necrosis in the teeth of dogs

During endodontic therapy (pulpectomy, root canal debridement and root canal filling) microbiological management is a major concern. Bacteria present in dentine tubules, apical foramina and apical delta are causally related to failure of the procedure. Studies have shown that during single session endodontic treatment bacteria remain within dental structures. The aim of the present study was to evaluate endodontic treatment performed as two sessions, using temporary endodontic dressing materials for different periods in four groups of experimental dogs. A total of 80 roots of second and third upper premolar teeth and second, third and fourth lower premolar teeth were divided into four groups. The pulp chamber was opened with burrs and the pulp exposed for 60 days to induce pulpal inflammation and necrosis. Groups II, III and IV were treated with calcium hydroxide plus camphorated paramono-chlorophenol (PMCC) for 7, 15 and 30 days, respectively. In all groups, the root canals were filled with zinc oxide-eugenol and gutta-percha cones. Clinical and radiographical measurements were performed every 2 weeks. After 60 days a small block section containing the teeth, surrounding periapical tissues and the periodontium was removed for histological and microbiological study. Histological analysis revealed intense inflammatory response in all groups. Microbiological analysis showed microbial reduction inversely proportional to the period of time that the intracanal temporary medicament was left in place.

Permissivity of human HeLa cells to bovine adenovirus type 2 (BaV2 infection

Infection of hUlnan cells by bovine adenovirlls type 2 (BAV2) is abortive. To obtain a better understanding of this pllenomel1011, and in particular to identify Wllich steps in the viral replicative cycles are altered dllring this virlls-host cells interaction, we have llndertaken a detailed study of BAV2 infections of the nonpennissive hUlnan IIeLa cells. Using autoradiography and 3H-thymidine-labeled vvhole virus particles for infection of HeLa cells, vve determined that viral attachluent appears normal. Furthermore, Southern analysis revealed that internalization and transport to the nuclells occurs in BAV2 infected HeLa cells. To investigate viral DNi\ synthesis, infectivity assays involving hydroxyllrea, a viral DN-A synthesis inhibitor, were carried out. The results revealed that Bft:LV2 DNA synthesis does not occur in HeLa cells. Fllrtller investigations into viral early gene expression by northern blotting analyses indicated that HeLa cells fail to support expression of EIA. This suggested that abortive infection by BAV2 could be attributed to faiiure of EIA to express. To test the possibility that the failure to express ElA was due to the inability of the host cell to recognize the E lA prOlTIoter, ,ve carried out transient expression transfection experiments using plaslnids \vith the bacterial lacZ linder the control of either BAV2 or i\d5 EIA promoter. X-gal histochelIlical assays sho\ved expression of lacZ from the Ad5 ElA prOlnoter but no expression of lacZ [rOln the BAV2 EIA prOlTIoter. This further suggests that the abortive infection b:y BAV2 could be attributed to failure of EIA to express dlle to a nonfllnctional prOlTIoter in hlunan cells. Thus we speClllated that abortive infection of HeLa cells by adenoviruses may be averted by providing EtA functions in trans. To demonstrate this, we coinfected HeLa cells with Ad5 and BAV2, reasoning that Ad5 could cOlnpensate for EIA deficiency in BAV2. OUf results showed that BAV2 DNA synthesis was indeed Sllpported in HeLa cells coinfected with Ad5dlE3 as revealed by Southern analysis. In contrast, coinfection of HeLa cells \vith BAV2 and Ad5dlElE3 mutallt did not support BLt\V2 DNA synthesis. Interestingly, BAV2 failed to replicate in 293 cells which are constitlltively expressing the El genes. This could ilnply that El is necessary but not sufficient to avert the failllre ofBAV2 to undergo productive infection ofhulnan cells.

Estimators and Tests based on Likelihood-Depth with Application to Weibull Distribution, Gaussian and Gumbel Copula

In dieser Arbeit werden mithilfe der Likelihood-Tiefen, eingeführt von Mizera und Müller (2004), (ausreißer-)robuste Schätzfunktionen und Tests für den unbekannten Parameter einer stetigen Dichtefunktion entwickelt. Die entwickelten Verfahren werden dann auf drei verschiedene Verteilungen angewandt. Für eindimensionale Parameter wird die Likelihood-Tiefe eines Parameters im Datensatz als das Minimum aus dem Anteil der Daten, für die die Ableitung der Loglikelihood-Funktion nach dem Parameter nicht negativ ist, und dem Anteil der Daten, für die diese Ableitung nicht positiv ist, berechnet. Damit hat der Parameter die größte Tiefe, für den beide Anzahlen gleich groß sind. Dieser wird zunächst als Schätzer gewählt, da die Likelihood-Tiefe ein Maß dafür sein soll, wie gut ein Parameter zum Datensatz passt. Asymptotisch hat der Parameter die größte Tiefe, für den die Wahrscheinlichkeit, dass für eine Beobachtung die Ableitung der Loglikelihood-Funktion nach dem Parameter nicht negativ ist, gleich einhalb ist. Wenn dies für den zu Grunde liegenden Parameter nicht der Fall ist, ist der Schätzer basierend auf der Likelihood-Tiefe verfälscht. In dieser Arbeit wird gezeigt, wie diese Verfälschung korrigiert werden kann sodass die korrigierten Schätzer konsistente Schätzungen bilden. Zur Entwicklung von Tests für den Parameter, wird die von Müller (2005) entwickelte Simplex Likelihood-Tiefe, die eine U-Statistik ist, benutzt. Es zeigt sich, dass für dieselben Verteilungen, für die die Likelihood-Tiefe verfälschte Schätzer liefert, die Simplex Likelihood-Tiefe eine unverfälschte U-Statistik ist. Damit ist insbesondere die asymptotische Verteilung bekannt und es lassen sich Tests für verschiedene Hypothesen formulieren. Die Verschiebung in der Tiefe führt aber für einige Hypothesen zu einer schlechten Güte des zugehörigen Tests. Es werden daher korrigierte Tests eingeführt und Voraussetzungen angegeben, unter denen diese dann konsistent sind. Die Arbeit besteht aus zwei Teilen. Im ersten Teil der Arbeit wird die allgemeine Theorie über die Schätzfunktionen und Tests dargestellt und zudem deren jeweiligen Konsistenz gezeigt. Im zweiten Teil wird die Theorie auf drei verschiedene Verteilungen angewandt: Die Weibull-Verteilung, die Gauß- und die Gumbel-Copula. Damit wird gezeigt, wie die Verfahren des ersten Teils genutzt werden können, um (robuste) konsistente Schätzfunktionen und Tests für den unbekannten Parameter der Verteilung herzuleiten. Insgesamt zeigt sich, dass für die drei Verteilungen mithilfe der Likelihood-Tiefen robuste Schätzfunktionen und Tests gefunden werden können. In unverfälschten Daten sind vorhandene Standardmethoden zum Teil überlegen, jedoch zeigt sich der Vorteil der neuen Methoden in kontaminierten Daten und Daten mit Ausreißern.

Sustaining Success Task: Week 3 Introduction to reflection

An introduction to a method of reflection. This task looks at the process of writing a short piece of reflection and provides a framework for that activity

Finding the smallest eigenvalue by the inverse Monte Carlo method with refinement

Finding the smallest eigenvalue of a given square matrix A of order n is computationally very intensive problem. The most popular method for this problem is the Inverse Power Method which uses LU-decomposition and forward and backward solving of the factored system at every iteration step. An alternative to this method is the Resolvent Monte Carlo method which uses representation of the resolvent matrix [I -qA](-m) as a series and then performs Monte Carlo iterations (random walks) on the elements of the matrix. This leads to great savings in computations, but the method has many restrictions and a very slow convergence. In this paper we propose a method that includes fast Monte Carlo procedure for finding the inverse matrix, refinement procedure to improve approximation of the inverse if necessary, and Monte Carlo power iterations to compute the smallest eigenvalue. We provide not only theoretical estimations about accuracy and convergence but also results from numerical tests performed on a number of test matrices.

Impact of serving method on the consumption of nutritional supplement drinks: randomised trial in older adults with cognitive impairment

Aim: To analyse the influence of serving method on compliance and consumption of nutritional supplement drinks in older adults with cognitive impairment. Background: Oral nutritional supplement drinks have positive benefits on increasing nutritional status within undernourished elderly people leading to weight gain. However, consumption of these drinks is low and therefore limits their effectiveness. Design: This study was a non blind randomised control trial where participants either consumed nutritional supplement drinks in a glass/beaker or consumed them through a straw inserted directly into the container. Method: Participants with longstanding cognitive impairment were recruited from nursing homes (n=31) and hospitals (n=14). Participants were randomised to serving method. Nursing and care staff were instructed to give the supplement drinks three times per day on alternate days over a week by the allocated serving method. The researcher weighed the amount of supplement drink remaining after consumption. Data were collected over 12 months in 2011-2012. Results: 45 people participated in this study mean age 86.7 (SD 7.5 ) years. After randomisation there was no significant difference between the baseline characteristics of the two groups. Participants randomised to consume nutritional drinks from a glass / beaker drank significantly more than those who consumed them via a straw inserted directly into the container. However, supplements allocated to be given in a glass/beaker were more frequently omitted. Conclusion: Nutritional supplement drinks should be given to people with dementia who are able to feed themselves in a glass or a beaker if staffing resources allow (NIHR CSP ref 31101).

Genetics of resistance to powdery mildew (Microsphaera diffusa) in Brazilian soybean populations

Crosses between resistant and susceptible soybean cultivars were performed and the F2 populations were obtained to study the inheritance of soybean resistance to powdery mildew and to estimate the number and action of genes related to resistance. The reaction to powdery mildew was studied in a greenhouse and pots carrying plants with symptoms were distributed among the pots carrying the genotypes to be tested as a source of inoculum. Individual plants were scored according to the method of Yorinori (1997), with modifications, and classified as resistant or susceptible. The results showed that adult soybeans plants can present resistance to powdery mildew, which is controlled by one major gene with a dominant effect.

Obstrução nasolacrimal congênita: fatores relacionados com a melhora após sondagem terapêutica

OBJETIVO: Avaliar em crianças portadoras de obstrução nasolacrimal congênita (ONLC) os índices de cura com a sondagem das vias lacrimais e os fatores relacionados com o insucesso do procedimento. MÉTODO: Estudo retrospectivo observacional, incluindo 80 crianças portadoras de obstrução nasolacrimal congênita, submetidas à sondagem terapêutica da via lacrimal. As crianças foram avaliadas quanto ao sexo, faixa etária e resultado da sondagem. Os dados obtidos foram avaliados por estatística descritiva, teste de Goodman e pelo teste não paramétrico de Mann-Whitney, com nível de significância de 5%. RESULTADOS: A cura ocorreu igualmente em ambos os sexos. A média de idade das crianças que se beneficiaram da sondagem foi de 19,95±11,4 meses e a das crianças que não se curaram foi de 23,37±15,2 meses. A possibilidade de cura ocorreu igualmente nas faixas etárias acima dos 6 meses. Observou-se nas crianças que não se curaram com a sondagem a existência de alterações nasais como rinite, hipertrofia de adenóide ou de cornetos, desvio de septo e sinusopatia. CONCLUSÃO: A possibilidade de cura com a sondagem não varia significativamente mesmo nas idades acima dos 12 meses. Entre as causas de insucesso com o procedimento devem ser incluídas as alterações da cavidade nasal.

Bond strength between acrylic resin and maxillofacial silicone

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)