CHARACTERIZATION OF A LASER-PRODUCED PLASMA USING THE TECHNIQUE OF POINT-PROJECTION ABSORPTION-SPECTROSCOPY

The technique of point-projection spectroscopy has been shown to be applicable to the study of expanding aluminum plasmas generated by approximately 80 ps laser pulses incident on massive, aluminum stripe targets of approximately 125-mu-m width. Targets were irradiated at an intensity of 2.5 +/- 0.5 x 10(13) W/cm2 in a line focus geometry and under conditions similar to those of interest in x-ray laser schemes. Hydrogenic and heliumlike aluminum resonance lines were observed in absorption using a quasicontinuous uranium back-lighter plasma. Using a pentaerythrital Bragg crystal as the dispersive element, a resolving power of approximately 3500 was achieved with spatial resolution at the 5-mu-m level in frame times of the order of 100 ps. Reduction of the data for times up to 150 ps after the peak of the incident laser pulse produced estimates of the temperature and ion densities present, as a function of space and time. The one-dimensional Lagrangian hydrodynamic code MEDUSA coupled to the atomic physics non-local-thermodynamic-equilibrium ionized material package was used to simulate the experiment in planar geometry and has been shown to be consistent with the measurements.

Long-term graft survival in patients with flexible open-loop anterior- chamber intraocular lenses

Purpose. To evaluate the long-term graft survival and complications of flexible, open-loop anterior-chamber intraocular lenses in patients with penetrating keratoplasty for pseudophakic or aphakic bullous keratopathy. Methods. We reviewed charts of all consecutive patients who underwent penetrating keratoplasty for pseudophakic or aphakic bullous keratopathy combined with implantation of a flexible, open-loop, anterior-chamber intraocular lens at our institution between 1983 and 1988. One-hundred one eyes of 99 patients were evaluated. Graft-survival rates were calculated by using the Kaplan-Meier actuarial method. Results. Mean follow-up was 49.8 months (range. 1-144). The probability of graft survival at 1, 2, 4, 6, and 8 years was 93, 87, 78, 65, and 65%, respectively. A total of 25 (24.8%) grafts failed. Progressive corneal edema without signs of rejection was the most common finding in patients with failed grafts (10 eyes, 40%). The most frequent complication observed was newly diagnosed or worsening of preexisting glaucoma (46 eyes, 45.5%). Conclusions. Our long-term results support flexible, open-loop anterior-chamber intraocular lenses as a reasonable option, at the time of penetrating keratoplasty, in patients with pseudophakic and aphakic bullous keratopathy.

Robust visual tracking using structurally random projection and weighted least squares

Sparse representation based visual tracking approaches have attracted increasing interests in the community in recent years. The main idea is to linearly represent each target candidate using a set of target and trivial templates while imposing a sparsity constraint onto the representation coefficients. After we obtain the coefficients using L1-norm minimization methods, the candidate with the lowest error, when it is reconstructed using only the target templates and the associated coefficients, is considered as the tracking result. In spite of promising system performance widely reported, it is unclear if the performance of these trackers can be maximised. In addition, computational complexity caused by the dimensionality of the feature space limits these algorithms in real-time applications. In this paper, we propose a real-time visual tracking method based on structurally random projection and weighted least squares techniques. In particular, to enhance the discriminative capability of the tracker, we introduce background templates to the linear representation framework. To handle appearance variations over time, we relax the sparsity constraint using a weighed least squares (WLS) method to obtain the representation coefficients. To further reduce the computational complexity, structurally random projection is used to reduce the dimensionality of the feature space while preserving the pairwise distances between the data points in the feature space. Experimental results show that the proposed approach outperforms several state-of-the-art tracking methods.

Anderson County's labor potential: with a projection for the future

This report by the State Development Board and the Anderson Chamber of Commerce is a survey of present labor availability and future labor supply in Anderson County. Statistics include employment status, school enrollment including college, projection of school dropouts, and projection of new entries in work force with and without high school education.

Retinal thickening in HLA-B27 associated acute anterior uveitis: evolution with time and association with severity of inflammatory activity.

Purpose: To describe the evolution of retinal thickness in eyes affected with acute anterior uveitis (AAU) in the course of follow-up and to assess its correlation with severity of inflammatory activity in the anterior chamber. Methods: Design: Prospective, cohort study Setting: Institutional study Patient population: 72 eyes (affected and fellow eyes) of 36 patients Observation procedure: Patients were followed daily until beginning of resolution of inflammatory activity and weekly thereafter. Optical coherence tomography and laser flare photometry were performed at each visit. Treatment consisted of topical corticosteroids Main outcome measures: Retinal thickness of affected eyes, difference in retinal thickness between affected and fellow eyes and their evolution in time, association between maximal retinal thickness and initial laser flare photometry. Results: Difference in retinal thickness between affected and fellow eyes became significant on average seven days from baseline and remained so through-out follow-up (p<0.001). There was a steep increase in retinal thickness of affected eyes followed by a progressive decrease after reaching a peak value. Maximal difference in retinal thickness between affected and fellow eyes was observed between 17 and 25 days from baseline and exhibited a strong, positive correlation with initial laser flare photometry values (p=0.015). Conclusions: Retinal thickness in eyes affected with AAU presents a steep increase over 3 to 4 weeks and then gradually decreases. Severity of inflammation at baseline predicts the amount of retinal thickening in affected eyes. A characteristic pattern of temporal response of retinal anatomy to inflammatory stimuli seems to arise.

Une lésion neurotoxique de l’habenula latérale amplifie la locomotion induite par un psychostimulant sans altérer la récompense

L’habenula, un noyau épithalamique, est située au centre de la voie dorsale diencéphalique. Cette voie relie les structures limbiques et les ganglions de la base aux cellules monoaminergiques du mésencéphale. En particulier, l’habenula latérale (HbL) projette directement aux cellules dopaminergiques et GABAergiques de l’aire tegmentale ventrale (ATV). L’ATV est le site d’origine de la voie mésolimbique dopaminergique, une voie impliquée de façon cruciale dans la manifestation des comportements dirigés. L’importance de cette projection habenulaire pour le comportement demeure encore méconnue. Ainsi, l’objectif de cette étude est d’approfondir notre compréhension du rôle de régulation de l’HbL sur les comportements dépendants de la neurotransmission dopaminergique. MATÉRIEL ET MÉTHODES: Des rats adultes mâles Sprague-Dawley ont été anesthésiés avec de l’isofluorane et installés sur un appareil stéréotaxique. L’acide iboténique, une neurotoxine agoniste des récepteurs glutamatergiques, était infusée bilatéralement dans l’HbL (0,25 μg/0,25 μl/côté). Les rats du groupe contrôle recevaient des infusions NaCl 0,9%. Les rats de l’expérience d’autostimulation intracérébrale (ASIC) étaient aussi implantés d’une électrode monopolaire dans le mésencéphale postérieur. Un groupe de rats était testé pour leur réponse de locomotion à l’amphétamine (0; 0,5 ou 1 mg/kg, intrapéritonéal), dix jours suivant la lésion de l’HbL. La locomotion était mesurée dans des chambres d’activité, chacune équipée de deux faisceaux parallèles infrarouges. Le jour du test, les rats étaient pesés et placés dans la chambre d’activité puis leur activité locomotrice de base était mesurée pendant une heure. Les rats recevaient ensuite une dose d’amphétamine ou le véhicule (NaCl 0,9%) par voie intrapéritonéale et l’activité locomotrice était mesurée pendant deux heures supplémentaires. Un groupe de rats distinct a été utilisé dans l’expérience d’ASIC. Commençant sept jours suivant la lésion, les rats étaient entraînés à appuyer sur un levier afin de s’autoadministrer des stimulations électriques, au cours de sessions quotidiennes. Nous avons ensuite mesuré chacun des taux de réponses d’une série de stimulations aux fréquences décroissantes. À partir d’une courbe réponses-fréquences, le seuil de récompense était inféré par la fréquence de la stimulation nécessaire pour produire une réponse semi-maximale. Les seuils de récompense étaient stabilisés à un niveau similaire pour l’ensemble des rats. Enfin, l’effet sur la récompense de l’amphétamine était testé aux mêmes doses employées pour l’expérience de locomotion. RÉSULTATS: Une lésion neurotoxique de l’HbL n’a pas altéré les niveaux de base de l’activité locomotrice dans chaque groupe. Cependant, une telle lésion a potentialisé l’effet de locomotion de l’amphétamine (1 mg/kg) pendant la première heure suivant son administration, et une tendance similaire était observable pendant la seconde heure. À l’inverse, nous n’avons observé aucune interaction entre une lésion à l’HbL et l’effet amplificateur sur la récompense de l’amphétamine. CONCLUSION: Nos résultats révèlent une importante contribution fonctionnelle de l’HbL à la locomotion induite par l’activation de la voie mésolimbique dopaminergique avec une dose de 1 mg/kg d’amphétamine. À l’opposé, aucun effet sur la récompense n’a été observé. Ces résultats suggèrent que l’activation psychomotrice et l’amplifiation de la récompense produite par l’amphétamine dépendent de substrats dissociables, chacun étant différentiellement sensible à la modulation provenant de l’HbL.

Projection de la mortalité aux âges avancées au Canada : comparaison de trois modèles

Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal

Projection multilingue d'annotations pour dialogues avancés

Depuis quelques années, les applications intégrant un module de dialogues avancés sont en plein essor. En revanche, le processus d’universalisation de ces systèmes est rapidement décourageant : ceux-ci étant naturellement dépendants de la langue pour laquelle ils ont été conçus, chaque nouveau langage à intégrer requiert son propre temps de développement. Un constat qui ne s’améliore pas en considérant que la qualité est souvent tributaire de la taille de l’ensemble d’entraînement. Ce projet cherche donc à accélérer le processus. Il rend compte de différentes méthodes permettant de générer des versions polyglottes d’un premier système fonctionnel, à l’aide de la traduction statistique. L’information afférente aux données sources est projetée afin de générer des données cibles parentes, qui diminuent d’autant le temps de développement subséquent. En ce sens, plusieurs approches ont été expérimentées et analysées. Notamment, une méthode qui regroupe les données avant de réordonner les différents candidats de traduction permet d’obtenir de bons résultats.

An overview of the advantages and constraints of coded pattern projection techniques for autonomous navigation

The absolute necessity of obtaining 3D information of structured and unknown environments in autonomous navigation reduce considerably the set of sensors that can be used. The necessity to know, at each time, the position of the mobile robot with respect to the scene is indispensable. Furthermore, this information must be obtained in the least computing time. Stereo vision is an attractive and widely used method, but, it is rather limited to make fast 3D surface maps, due to the correspondence problem. The spatial and temporal correspondence among images can be alleviated using a method based on structured light. This relationship can be directly found codifying the projected light; then each imaged region of the projected pattern carries the needed information to solve the correspondence problem. We present the most significant techniques, used in recent years, concerning the coded structured light method

Immersive Projection for biochemical pattern matching

In all biological processes, protein molecules and other small molecules interact to function and form transient macromolecular complexes. This interaction of two or more molecules can be described by a docking event. Docking is an important phase for structure-based drug design strategies, as it can be used as a method to simulate protein-ligand interactions. Various docking programs exist that allow automated docking, but most of them have limited visualization and user interaction. It would be advantageous if scientists could visualize the molecules participating in the docking process, manipulate their structures and manually dock them before submitting the new conformations to an automated docking process in an immersive environment, which can help stimulate the design/docking process. This also could greatly reduce docking time and resources. To achieve this, we propose a new virtual modelling/docking program, whereby the advantages of virtual modelling programs and the efficiency of the algorithms in existing docking programs will be merged.

On the evolution of the solar wind between 1 and 5 AU at the time of the Cassini Jupiter flyby: Multispacecraft observations of interplanetary coronal mass ejections including the formation of a merged interaction region

The Cassini flyby of Jupiter occurred at a time near solar maximum. Consequently, the pre-Jupiter data set reveals clear and numerous transient perturbations to the Parker Spiral solar wind structure. Limited plasma data are available at Cassini for this period due to pointing restrictions imposed on the instrument. This renders the identification of the nature of such structures ambiguous, as determinations based on the magnetic field data alone are unreliable. However, a fortuitous alignment of the planets during this encounter allowed us to trace these structures back to those observed previously by the Wind spacecraft near the Earth. Of the phenomena that we are satisfactorily able to trace back to their manifestation at 1 AU, two are identified as being due to interplanetary coronal mass ejections. One event at Cassini is shown to be a merged interaction region, which is formed from the compression of a magnetic cloud by two anomalously fast solar wind streams. The flux-rope structure associated with this magnetic cloud is not as apparent at Cassini and has most likely been compressed and deformed. Confirmation of the validity of the ballistic projections used here is provided by results obtained from a one-dimensional magnetohydrodynamic projection of solar wind parameters measured upstream near the Earth. It is found that when the Earth and Cassini are within a few tens of degrees in heliospheric longitude, the results of this one-dimensional model predict the actual conditions measured at 5 AU to an impressive degree. Finally, the validity of the use of such one-dimensional projections in obtaining quasi-solar wind parameters at the outer planets is discussed.

Predictions of the arrival time of coronal mass ejections at 1AU: an analysis of the causes of errors

Three existing models of Interplanetary Coronal Mass Ejection (ICME) transit between the Sun and the Earth are compared to coronagraph and in situ observations: all three models are found to perform with a similar level of accuracy (i.e. an average error between observed and predicted 1AU transit times of approximately 11 h). To improve long-term space weather prediction, factors influencing CME transit are investigated. Both the removal of the plane of sky projection (as suffered by coronagraph derived speeds of Earth directed CMEs) and the use of observed values of solar wind speed, fail to significantly improve transit time prediction. However, a correlation is found to exist between the late/early arrival of an ICME and the width of the preceding sheath region, suggesting that the error is a geometrical effect that can only be removed by a more accurate determination of a CME trajectory and expansion. The correlation between magnetic field intensity and speed of ejecta at 1AU is also investigated. It is found to be weak in the body of the ICME, but strong in the sheath, if the upstream solar wind conditions are taken into account.

The application of affine projection to the development of a siren noise cancellation system

Emergency vehicles use high-amplitude sirens to warn pedestrians and other road users of their presence. Unfortunately, the siren noise enters the vehicle and corrupts the intelligibility of two-way radio voice com-munications from the emergency vehicle to a control room. Often the siren has to be turned off to enable the control room to hear what is being said which subsequently endangers people's lives. A digital signal processing (DSP) based system for the cancellation of siren noise embedded within speech is presented. The system has been tested with the least mean square (LMS), normalised least mean square (NLMS) and affine projection algorithm (APA) using recordings from three common types of sirens (two-tone, wail and yelp) from actual test vehicles. It was found that the APA with a projection order of 2 gives comparably improved cancellation over the LMS and NLMS with only a moderate increase in algorithm complexity and code size. Therefore, this siren noise cancellation system using the APA offers an improvement in cancellation achieved by previous systems. The removal of the siren noise improves the response time for the emergency vehicle and thus the system can contribute to saving lives. The system also allows voice communication to take place even when the siren is on and as such the vehicle offers less risk of danger when moving at high speeds in heavy traffic.

Determination of the absolute accuracy of UK chamber facilities used in measuring methane emissions from livestock

Respiration chambers are one of the primary sources of data on methane emissions from livestock. This paper describes the results from a coordinated set of chamber validation experiments which establishes the absolute accuracy of the methane emission rates measured by the chambers, and for the first time provides metrological traceability to international standards, assesses the impact of both analyser and chamber response times on measurement uncertainty and establishes direct comparability between measurements made across different facilities with a wide range of chamber designs. As a result of the validation exercise the estimated combined uncertainty associated with the overall capability across all facilities reduced from 25.7% (k = 2, 95% confidence) before the validation to 2.1% (k = 2, 95% confidence) when the validation results are applied to the facilities’ data.

Ultrasonic versus high-speed cavity preparation: Analysis of increases in pulpal temperature and time to complete preparation

Statement of problem. The use of ultrasonic tips has become an alternative for cavity preparation. However, there are concerns about this type of device, particularly with respect to intrapulpal temperatures and cavity preparation time.Purpose. The purpose of this study was to analyze pulpal temperature increases generated by an ultrasonic cavity preparation with chemical vapor deposition (CVD) tips, in comparison to preparation with a high-speed handpiece with a diamond rotary cutting instrument. The time required to complete the cavity preparation with each system was also evaluated.Material and methods. Thermocouples were positioned in the pulp chamber of 20 extracted human third molars. Slot-type cavities (3 x 3 x 2 mm) were prepared on the buccal and the lingual surfaces of each tooth. The test groups were: high-speed cavity preparation with diamond rotary cutting instruments (n = 20) and ultrasonic cavity preparation with CVD points (n = 20). During cavity preparation, the increases In pulpal temperature, and the time required for the preparation, were recorded and analyzed by Student's t test for paired samples (alpha = .05).Results. The average pulpal temperature increases were 4.3 degrees C for the high-speed preparation and 3.8 degrees C for the ultrasonic preparation, which were statistically similar (P = .052). However, significant differences were found (P < .001) for the time expended (3.3 minutes for the high-speed bur and 13.77 minutes for the ultrasound device).Conclusions. The intrapulpal temperatures produced during cavity preparation by ultrasonic tips versus high-speed bur preparation were similar. However, the use of the ultrasonic device required 4 times longer for the completion of a cavity preparation.