Efficient organic electroluminescent devices based on an organosamarium complex

Several organic electroluminescent devices with different device structures were fabricated based on an organosamarium complex Sm(HFNH)(3)phen[HFNH=4, 4, 5, 5, 6, 6, 6-heptafluoro-l-(2-naphthvl)hexane-1, 3-dione; phen=1, 10-phenanthroline] as emitter. Their electroluminescent properties were investigated in detail. Although the devices with the optimal structure ITO/TPD (50nm)/ Sm(HFNH)(3)phen (xwt%):CBP (50nm)/BCP (20nm)/AIQ (30nm)/LiF (1 nm),/Al (200nm) show high brightness (more than 400cd/m(2)) and high current efficiency (about 1 cd/A), there are emissions from CBP, BCP and even from AIQ existing in the electroluminescence (EL) spectra besides emission from Sm(HFNH)(3)Phen. The reason to this was discussed. The device with the structure ITO/TPD (50 nm)/ Sm(HFNH)(3)phen (50 nm)/AIQ (30 nm)/LiF (1 nm)/Al (200 nm) exhibits the maximum brightness of 118 cd/m(2) and current efficiency of 0.029 cd/A, and shows emissions from AIQ and Sm(HFNH)(3)phen at high voltages. However, with the BCP hole-block layer added, the device [ITO/TPD (50 nm)/Sm(HFNH)(3)phen (50 nm)/BCP (20 nm)/AIQ (30 nm)/LiF (1 nm)/Al (200 nm)] exhibits pure Sm3+ emission in 2 the EL spectra even at high voltages, with the maximum current efficiency of 0.29cd/A and brightness of 82cd/m(2)

Vapor phase beckmann rearrangement of cyclohexanone oxime over rare earth pyrophosphates

A new application of rare earth pyrophosphates in vapor phase Beckmann rearrangement of cyclohexanone oxime was investigated. The rare earth phosphates were characterized by means of XRD, FT-IR, NH3-TPD and water contact angle measurement. It was found that the weak surface acidity and appropriate surface hydrophobicity should be two key factors in the excellent performance of these catalysts.

Effect of strontium substitution on the activity of La2-xSrxNiO4 (x=0.0-1.2) in NO decomposition

The aim of this work is to study the effect of Sr substitution on the redox properties and catalytic activity of La2-xSrxNiO4 (x = 0.0-1.2) for NO decomposition. Results suggest that the x = 0.6 sample shows the highest activity. The characterization (TPD, TPR, etc.) of samples indicates that the x = 0.6 sample possesses suitable abilities in both oxidation and reduction, which facilitates the proceeding of oxygen desorption and NO adsorption. At temperature below 700 degrees C, the oxygen desorption is difficult, and is the rate-determining step of NO decomposition. With the increase of reaction temperature (T > 700 degrees C), the oxygen desorption is favorable and, the active adsorption of NO on the active site (NO + V-o + Ni2+ -> NO--Ni3+) turns out to be the rate-determining step. The existence of oxygen vacancy is the prerequisite condition for NO decomposition, but its quantity does not relate much to the activity.

Surface-appropriate lipophobicity - Application in isobutene oligomerization over Teflon-modified silica-supported 12-silicotungstic acid

A series of silica-supported 12-silicotungstic acid catalysts (H4SiW12O40, abbreviated as HSiW), modified with various loadings of Teflon (HSiW/SiO2-Teflon), were prepared by an impregnation method. The surface properties of the catalysts were studied by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), BET, infrared (IR) spectroscopy, NH3-TPD and the Drop Shape Analysis (DSA). SEM results combined with energy-dispersive X-ray (EDX) measurements of HSiW/SiO2-Teflon revealed that F-compound (Teflon) is effectively coated on the catalyst surface. The contact angles for water and oil of 50 wt% HSiW/SiO2 and HSiW/SiO2-Teflon indicate that HSiW/SiO2-Teflon catalyst enhances not only the surface hydrophobicity but also the surface lipophobicity by means of the addition of Teflon. Silica-supported 12-silicotungstic acid modified with Teflon exhibits higher C-8(=) selectivity and longer lifetime than that of silica-supported 12-silicotungstic acid in isobutene oligomerization. Thus, surface-appropriate lipophobicity of catalysts may be effective for decreasing the interaction between coke precursors and the catalyst surface and for removing deposited coke more easily.

Highly efficient red electroluminescence from stacked organic light-emitting devices based on a europium complex

Stacked organic light-emitting devices (OLEDs) based on a europium complex Eu(TTA)(3) (Tmphen) (TTA = thenoyltrifluoroacetone,Tmphen = 3,4,7,8-tetramethyl-1,10-phenanthroline) were fabricated. In this stacked OLEDs, Li:BCP/V2O5 was used the intermediate charge generation layer sandwiched between two identical emissive units consisting of TPD/CBP:DCJTB:Eu(TTA)(3)(Tmphen)/BCP. As expected, the brightness and electroluminescent (EL) current efficiency were approximately enhanced by double times that of conventional single-unit devices. The stacked OLEDs showed the maximum luminance up to 3000 cd/m(2) at a current density of 190 mA/cm(2) and a current efficiency of 14.5 cd/A at a current density of 0.08 mA/cm(2). At the brightness of 100 cd/m(2), the current efficiency reached 10 cd/A at a current density of 1.6 mA/cm2.

超导型复合氧化物在苯酚羟化反应中催化作用

采用柠檬酸络合法合成了一系列含铜复合氧化物 (超导体 ) .用化学滴定方法和O2 TPD等技术对所合成的复合氧化物的组成和表面性质进行了测定 .通过探讨催化剂结构与活性的关系 ,发现含铜复合氧化物中的非化学计量氧和铜离子的平均价态与苯酚羟化活性和过氧化氢分解活性密切相关 .在实验中观察到醌类化合物在苯酚羟化反应循环中具有增强电子传递功能 ,在此基础上提出了醌类化合物参与催化循环的机理.

A hydroxyphenyloxadiazole lithium complex as a highly efficient blue emitter and interface material in organic light-emitting diodes

We synthesized a hydroxyphenyloxadiazole lithium complex (LiOXD) as a blue light-emitting and electron injection/transport material to be used in double-layer organic electroluminescent devices. Devices with the concise configuration of ITO/TPD/LiOXD/Al showed bright blue EL emission centered at 468 nm with a maximum luminance of 2900 cd m(-2). A current efficiency of 3.9 cd A(-1) and power efficiency of 1.1 lm W-1 were obtained. LiOXD was also examined as an interface material. The efficiency of an ITO/NPB/Alq(3)/Al device increased considerably when LiOXD was inserted between Alq(3) and aluminium. The improvement of the device characteristics with LiOXD approached that observed with the dielectric LiF salt.

Green electroluminescent device with a terbium beta-diketonate complex as emissive center

In this study, a terbium complex, Tb(acac)(3)bath (acac: acetylacetone, bath: 4,7-diphenyl-1,10-phenanthroline), was synthesized and its luminescent properties were investigated compared with the reported terbium complex, Tb(acac)(3)phen (phen: phenanthroline). When it was used as an emitting material in organic electroluminescent (EL) device, the triple-layer-type device with a structure of glass substrate/ITO (indium-tin oxide)/TPD (N,N'-diphenyl-N,N'-bis(3-methylphenyl)-1,1'-biphenyl-4,4'-diamine)/Tb(acac)(3)bath/Alq(3) (tris (8-hydroxyquinolinato) aluminum)/Al (aluminum) exhibited bright characteristic emission of terbium ion upon applying DC voltage. An apparent difference was observed between the photoluminescence spectrum and the EL spectrum. The EL device exhibited some characteristics of diode and the maximum luminance of 77 cd/m(2) was obtained at 17 V.

A novel terbium (III) beta-diketonate complex as thin film for optical device application

A novel terbium complex, Tb(acac)(3)AAP (acac: acetylacetone, AAP: 4-amino-antipyrine), was synthesized and its luminescent properties were studied. When it was used as an emitting center, triple-layer-type device with a structure of glass substrate/ITO (indium-tin oxide)/TPD (N,N'-diphenyl-N,N'-bis(3-methylphenyl)-1,1'-biphenyl-4,4'-diamine)./Tb(acac)(3)AAP/PBD (2-(4-biphenyl)-5-(4-t-butylphenyl)-1,3,4-oxadiazole) or Alq(3) (tris(8-hydroxyquinolinato) aluminum)/Al (aluminum) exhibited bright characteristic emission of terbium ion upon applying d.c. voltage. The maximum luminance of the device is 56 cd/m(2) at 19 V and the maximum luminance efficiency is 0.357 lm/W.

Electroluminescence based on a beta-diketonate ternary samarium complex

The triplet energy state of the HTH [HTH: 4,4,5,5,6,6,6-heptafluoro-1-(2-thienyl) hexane-1,3-dione] ligand was measured to be 20 400 cm(-1), which indicated that Sm(HTH)(3) phen (phen: 1,10-phenanthroline) is a good complex to produce strong PL intensity and high fluorescence yield. Electroluminescent (EL) devices using the Sm( HTH) 3 phen complex as the emissive center were fabricated by vapor deposition and spin-coating methods. The relative intensity of the EL spectra changed compared to the photoluminescence (PL) spectrum, which suggested that the luminescence mechanisms of PL and EL have differences. A luminance of 9 cd m(-2) and a higher brightness of 21 cd m(-2) were obtained from the devices ITO/TPD (40 nm)/ Sm( HTH)(3) phen (50 nm)/ PBD (30 nm)/ Al (200 nm) and ITO/PVK (40 nm)/ PVK : Sm( HTH)(3) phen (2.5 wt%, 50 nm)/ PBD (30 nm)/ Al (200 nm), respectively.

The role of redox property of La2-x(Sr,Th)(x)CuO4 +/-lambda playing in the reaction of NO decomposition and NO reduction by CO

Two systems of mixed oxides, La2-xSrxCuO4 +/- lambda (0.0 less than or equal to x less than or equal to 1.0) and La(2-x)Tn(x)CuO(4 +/-) (lambda) (0.0 less than or equal to x less than or equal to 0.4), with K2NiF4 structure were prepared. The average valence of Cu ions and oxygen nonstoichiometry (lambda) were determined by means of chemical analysis. Meanwhile, the adsorption and activation of nitrogen monoxide (NO) and the mixture of NO + CO over the mixed oxide catalysts were studied by means of mass spectrometry temperature-programmed desorption (MS-TPD). The catalytic behaviors in the reactions of direct decomposition of NO and its reduction by CO were investigated, and were discussed in relation with average valence of Cu ions, A and the activation and adsorption of reactant molecules. It has been proposed that both reactions proceed by the redox mechanism, in which the oxygen vacancies and the lower-valent Cu ions play important roles in the individual step of the redox cycle. Oxygen vacancy is more significant for NO decomposition than for NO + CO reaction. For the NO + CO reaction, the stronger implication of the lower-valent Cu ions or oxygen vacancy depends on reaction temperature and the catalytic systems (Sr- or Th-substituted). (C) 2000 Elsevier Science B.V. All rights reserved.

WO_3/ZrO_2固体强酸催化剂上异丁烷/丁烯的烷基化反应Ⅱ.过渡金属的助催化作用

制备了一系列用过渡金属M (M =Pt,Co ,Ni,Mn ,Fe,Cu)活化的WO3 /ZrO2 固体强酸催化剂 ,用XRD ,DTA TG ,H2 TPR ,NH3 TPD等测定了其晶型结构、表面状态和酸量 .结果表明 ,各样品中的ZrO2 主要以T晶相存在 ,但T晶相ZrO2 所占的比例因过渡金属不同而异 ,比表面积比WO3 /ZrO2 稍有下降 ;金属Pt的引入使呈单层分散的WO3 的表面状态发生了改变 .研究了异丁烷 /丁烯烷基化反应 ,其反应活性与酸量的测定结果有对应关系 ;与WO3 /ZrO2 相比 ,M WO3 /ZrO2 上的丁烯转化率均稍有下降 ,但具有更高的i C08选择性 .从反应机理分析了添加过渡金属无显著效果的原因.

WO_3/ZrO_2固体强酸催化剂上异丁烷-丁烯烷基化反应的研究Ⅲ.超细ZrO_2载体对催化剂性能的影响

制备了以超细 Zr O2 为载体的 WO3/ Zr O2 、 SO42 - / Zr O2 、 Mo O3/ Zr O2 固体强酸催化剂 ,并用 XRD、 DTA-TG、 H2 - TPR、 NH3- TPD等方法表征了其晶型结构、表面状态和酸性 .结果表明 ,超细 Zr O2 及其催化剂均主要以 T-晶相存在 ,与通常以 Zr(OH) 4为载体制备的同类催化剂相比 ,Zr O2 中的 T-晶相所占比例虽有所下降 ,但具有更大的比表面积、酸强度和对金属氧化物的负载能力 ,且酸强度随焙烧温度升高而增强 ,表明其表面状态亦有较大变化 .研究了以超细 Zr O2 为载体的固体强酸催化剂上 ,异丁烷 -丁烯的烷基化反应 ,与通常以 Zr(OH) 4为载体制得的催化剂相比 ,其具有更好的烯烃转化率 ,在烷基化产物中 ,C5 ～ C7裂解产物较多 ,使 C80的选择性有所下降

异丁烷-丁烯烷基化反应催化剂的研究Ⅳ.Zr(SO_4)_2和Zr(SO_4)_2/Al_2O_3(SiO_2)

制备了一系列不同焙烧温度的 Zr(SO4) 2 及 Zr(SO4) 2 负载量不同的 Zr(SO4) 2 / Al2 O3(Si O2 )固体强酸催化剂 ,用 XRD、IR、BET、TG- DTA、NH3- TPD、Hamm ett指示剂等方法研究了该催化体系的晶型、结构、比表面、酸量及酸强度随负载量和焙烧温度的变化规律 .将 Zr(SO4) 2 负载在 Al2 O3和 Si O2 两种载体上呈现不同的特性 .在 Al2 O3上明显地延缓了 Zr(SO4) 2 的分解和 Zr O2的晶相转变 .并且使酸量和酸强度有所提高 .研究了异丁烷 -丁烯烷基化反应 ,结果表明 ,对 973和 10 2 3K焙烧的 Zr(SO4) 2 样品 ,活性最好 ,而对 Zr(SO4) 2 / Al2 O3,负载量在 m(Zr(SO4) 2 ) /m(Al2 O3) =0 .5 / 1.0左右时活性最好 .各种样品均具有较高的 C08选择性.

几种氧化物固体酸在异丁烷-丁烯烷基化反应中催化性能的比较

用 XRD、IR、NH3-TPD和 Hammett指示剂等方法对几种分子筛 (HZSM-5、HY、Hβ)和氧化物固体酸(SO2 - 4 /Zr O2 和 WO3/Zr O2 )进行了结构表征和酸性测定 ,并在相同的实验条件下比较了它们对异丁烷 -丁烯烷基化反应的催化活性和稳定性。结果表明 ,其烷基化产物中各种组分的收率有显著差异 ,催化性能优劣的次序为 :Hβ>HY>WO3/Zr O2 >SO2 - 4 /Zr O2 >HZSM-5。结合它们的基本物化性质 ,从反应机理上对催化性能的差异进行了分析 ,认为 Hβ和 HY可作为该反应的优选固体酸催化剂