Correlación entre la personalidad y los factores de la Teoría del Comportamiento Planeado (TCP) en adolescentes escolarizados de 11-19 años del Caribe Colombiano

The increasing rate of pregnancies in teenagers and the high incident of the infections of sexual transmission (HIV/ AIDS, for example), these are health related issues (and especially the sexual and reproductive health), which have received great attention on the part of investigators and of the public opinion in general. Recently, there has been evidenced that teenagers carry out very easily risk sexual behaviors, and those who have not presented the above mentioned behaviors also show high levels of intention to carry out them. There is the hypothesis that besides cognitive variables such as attitudes, subjective norms, perceived behavioral control and intention, the personality of the young persons is an aspect that plays an important paper in their sexual and reproductive health. Significant correlations were found between the variales of the TPB and the personality traits; the results suggest that the direction of these correlations is associated with the specific type of behavior or situation that is assessed. Keywords: personality, theory of planned behavior, adolescents, reproductive sexuality.

AE energy release during the fracture of HSC beams

An attempt has been made experimentally to investigate the acoustic emission (AE) energy release in high-strength concrete (HSC) beams subjected to monotonically increasing load. Acoustic emission energy release during the fracture process of the HSC beams is measured. Stress waves released during the fracture process in materials cause acoustic emissions. AE energy released during the fracture of a notched three-point bend plain concrete beam specimens having 28-day compressive strengths of 50.0 MPa, 69.0 MPa and 78.0 MPa and mortar (cement: sand (1: 4) by weight) specimens are studied. Mortar consists of one part cement and four parts sand by weight. The specimens were tested by a material testing system of 1200 kN capacity employing crack mouth opening displacement control at the rate of 0.0004 mm/s. The fracture energy and the AE energy released during the fracture process of all the tested TPB and mortar specimens are compared and discussed. The observations made in the present experimental study have some applications for monitoring the integrity of structures.

Moving from evaluation to trial: How do SMEs start adopting Cloud ERP?

The advent of cloud technology involving low subscription overheads cost has provided small and medium-sized enterprises (SMEs) with the opportunity to adopt new cloud-based corporate-wide systems (i.e., cloud ERP). This technology, operating through subscription-based services, has now provided SMEs with a complete range of IT applications that were once restricted to larger organisations. As anecdotal evidences suggest, SMEs are increasingly adopting cloud-based ERP software. The selection of an ERP is a complex process involving multiple stages and stakeholders, suggesting the importance of closer examination of cloud ERP adoption in SMEs. Yet, prior studies have predominantly treated technology adoption as a single activity and largely ignored the issue of ERP adoption in SMEs. Understanding of the process nature of the adoption and the factors that are important in each stage of the adoption potentially may result in guiding SMEs to make well-informed decisions throughout the ERP selection process. Thus, our study proposes that the adoption of cloud ERP should be examined as a multi-stage process. Using the Theory of Planned Behaviour (TPB) and Ettlie’s adoption stages, as well as employing data gathered from 162 owners of SMEs, our findings show that the factors that influence the intention to adopt cloud ERP vary significantly across adoptive stages.

A psychosocial analysis of parent's decisions for limiting their young child's screen time: An examination of attitudes, social norms and roles, and control perceptions

- Objectives Preschool-aged children spend substantial amounts of time engaged in screen-based activities. As parents have considerable control over their child's health behaviours during the younger years, it is important to understand those influences that guide parents' decisions about their child's screen time behaviours. - Design A prospective design with two waves of data collection, 1 week apart, was adopted. - Methods Parents (n = 207) completed a Theory of Planned Behaviour (TPB)-based questionnaire, with the addition of parental role construction (i.e., parents' expectations and beliefs of responsibility for their child's behaviour) and past behaviour. A number of underlying beliefs identified in a prior pilot study were also assessed. - Results The model explained 77% (with past behaviour accounting for 5%) of the variance in intention and 50% (with past behaviour accounting for 3%) of the variance in parental decisions to limit child screen time. Attitude, subjective norms, perceived behavioural control, parental role construction, and past behaviour predicted intentions, and intentions and past behaviour predicted follow-up behaviour. Underlying screen time beliefs (e.g., increased parental distress, pressure from friends, inconvenience) were also identified as guiding parents' decisions. - Conclusion Results support the TPB and highlight the importance of beliefs for understanding parental decisions for children's screen time behaviours, as well as the addition of parental role construction. This formative research provides necessary depth of understanding of sedentary lifestyle behaviours in young children which can be adopted in future interventions to test the efficacy of the TPB mechanisms in changing parental behaviour for their child's health.

Modelling heterogeneity of concrete using 2D lattice network for concrete fracture and comparison with AE study

In this paper, numerical modelling of fracture in concrete using two-dimensional lattice model is presented and also a few issues related to lattice modelling technique applicable to concrete fracture are reviewed. A comparison is made with acoustic emission (AE) events with the number of fractured elements. To implement the heterogeneity of the plain concrete, two methods namely, by generating grain structure of the concrete using Fuller's distribution and the concrete material properties are randomly distributed following Gaussian distribution are used. In the first method, the modelling of the concrete at meso level is carried out following the existing methods available in literature. The shape of the aggregates present in the concrete are assumed as perfect spheres and shape of the same in two-dimensional lattice network is circular. A three-point bend (TPB) specimen is tested in the experiment under crack mouth opening displacement (CMOD) control at a rate of 0.0004 mm/sec and the fracture process in the same TPB specimen is modelled using regular triangular 2D lattice network. Load versus crack mouth opening isplacement (CMOD) plots thus obtained by using both the methods are compared with experimental results. It was observed that the number of fractured elements increases near the peak load and beyond the peak load. That is once the crack starts to propagate. AE hits also increase rapidly beyond the peak load. It is compulsory here to mention that although the lattice modelling of concrete fracture used in this present study is very similar to those already available in literature, the present work brings out certain finer details which are not available explicitly in the earlier works.

Verification of the applicability of lattice model to concrete fracture by AE study

Notched three-point bend specimens (TPB) were tested under crack mouth opening displacement (CMOD) control at a rate of 0.0004 mm/s and the entire fracture process was simulated using a regular triangular two-dimensional lattice network only over the expected fracture proces zone width. The rest of the beam specimen was discretised by a coarse triangular finite element mesh. The discrete grain structure of the concrete was generated assuming the grains to be spherical. The load versus CMOD plots thus simulated agreed reasonably well with the experimental results. Moreover, acoustic emission (AE) hits were recorded during the test and compared with the number of fractured lattice elements. It was found that the cumulative AE hits correlated well with the cumulative fractured lattice elements at all load levels thus providing a useful means for predicting when the micro-cracks form during the fracturing process, both in the pre-peak and in the post-peak regimes.

Sign and share: What influences our participation in online microvolunteering

Microvolunteering is bite-size volunteering with no commitment to repeat and minimum formality, involving short and specific actions. Online microvolunteering occurs through an internet-connected device. University students' online microvolunteering decisions were investigated using an extended theory of planned behavior (TPB) comprising attitudes and normative and control perceptions, with the additional variables of moral norm and group norm. Participants (N = 303) completed the main TPB questionnaire and 1-month follow-up survey (N = 171) assessing engagement in online microvolunteering. Results generally supported standard and additional TPB constructs predicting intention. Intention predicted behavior. The findings suggest an important role for attitudes and moral considerations in understanding what influences this increasingly popular form of online activity.

The significance of brittle reaction layers in fusing of dental ceramics to titanium

This thesis comprises four intercomplementary parts that introduce new approaches to brittle reaction layers and mechanical compatibility of metalloceramic joints created when fusing dental ceramics to titanium. Several different methods including atomic layer deposition (ALD), sessile drop contact angle measurements, scanning acoustic microscopy (SAM), three-point bending (TPB, DIN 13 927 / ISO 9693), cross-section microscopy, scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS) were employed. The first part investigates the effects of TiO2 layer structure and thickness on the joint strength of the titanium-metalloceramic system. Samples with all tested TiO2 thicknesses displayed good ceramics adhesion to Ti, and uniform TPB results. The fracture mode was independent of oxide layer thickness and structure. Cracking occurred deeper inside titanium, in the oxygen-rich Ti[O]x solid solution surface layer. During dental ceramics firing TiO2 layers dissociate and joints become brittle with increased dissolution of oxygen into metallic Ti and consequent reduction in the metal plasticity. To accomplish an ideal metalloceramic joint this needs to be resolved. The second part introduces photoinduced superhydrophilicity of TiO2. Test samples with ALD deposited anatase TiO2 films were produced. Samples were irradiated with UV light to induce superhydrophilicity of the surfaces through a cascade leading to increased amount of surface hydroxyl groups. Superhydrophilicity (contact angle ~0˚) was achieved within 2 minutes of UV radiation. Partial recovery of the contact angle was observed during the first 10 minutes after UV exposure. Total recovery was not observed within 24h storage. Photoinduced ultrahydrophilicity can be used to enhance wettability of titanium surfaces, an important factor in dental ceramics veneering processes. The third part addresses interlayers designed to restrain oxygen dissolution into Ti during dental ceramics fusing. The main requirements for an ideal interlayer material are proposed. Based on these criteria and systematic exclusion of possible interlayer materials silver (Ag) interlayers were chosen. TPB results were significantly better in when 5 μm Ag interlayers were used compared to only Al2O3-blasted samples. In samples with these Ag interlayers multiple cracks occurred inside dental ceramics, none inside Ti structure. Ag interlayers of 5 μm on Al2O3-blasted samples can be efficiently used to retard formation of the brittle oxygen-rich Ti[O]x layer, thus enhancing metalloceramic joint integrity. The most brittle component in metalloceramic joints with 5 μm Ag interlayers was bulk dental ceramics instead of Ti[O]x. The fourth part investigates the importance of mechanical interlocking. According to the results, the significance of mechanical interlocking achieved by conventional surface treatments can be questioned as long as the formation of the brittle layers (mainly oxygen-rich Ti[O]x) cannot be sufficiently controlled. In summary in contrast to former impressions of thick titanium oxide layers this thesis clearly demonstrates diffusion of oxygen from sintering atmosphere and SiO2 to Ti structures during dental ceramics firing and the following formation of brittle Ti[O]x solid solution as the most important factors predisposing joints between Ti and SiO2-based dental ceramics to low strength. This among other predisposing factors such as residual stresses created by the coefficient of thermal expansion mismatch between dental ceramics and Ti frameworks can be avoided with Ag interlayers.

A comparative study of dynamic,ductile fracture initiation in two specimen configurations

In this work a single edge notched plate (SEN(T)) subjected to a tensile stress pulse is analysed, using a 2D plane strain dynamic finite element procedure. The interaction of the notch with a pre-nucleated hole ahead of it is examined. The background material is modelled by the Gurson constitutive law and ductile failure by microvoid coalescence in the ligament connecting the notch and the hole is simulated. Both rate independent and rate dependent material behaviour is considered. The notch tip region is subjected to a range of loading rates j by varying the peak value and the rise time of the applied stress pulse. The results obtained from these simulations are compared with a three point bend (TPB) specimen subjected to impact loading analysed in an earlier work [3] The variation of J at fracture initiation, J(c), with average loading rate j is obtained from the finite element simulations. It is found that the functional relationship between J(c) and j is fairly independent of the specimen geometry and is only dependent on material behaviour.

Perceptions Towards Adoption of Mobile Self-services: A Case Study (Available in Hanken intranet only)

This thesis is an exploratory case study that aims to understand the attitudes affecting adoption of mobile self-services. This study used a demo mobile self-service that could be used by consumers for making address changes. The service was branded with a large and trusted Finnish brand. The theoretical framework that was used consisted of adoption theories of technology, adoption theories of self-service and literature concerning mobile services. The reviewed adoption theories of both technology and self-service had their foundation in IDT or TRA/TPB. Based on the reviewed theories an initial framework was created. The empirical data collection was done through three computer aided group interview sessions with a total of 32 respondents. The data analysis started from the premises of the initial framework. Based on the empirical data the framework was constantly reviewed and altered and the data recoded accordingly. The result of this thesis was a list of attitudinal factors that affect the adoption of a mobile self-service either positively or negatively. The factors that were found to affect the attitudes towards adoption of mobile self-services positively were: that the service was time & place independent and saved time. Most respondents, but not all, also had a positive attitude towards adoption due to ease of use and being mentally compatible with the service. Factors that affected adoption negatively were lack of technical compatibility, perceived risk for high costs and risk for malicious software. The identified factors were triangulated in respect to existing literature and general attitudes towards mobile services.

An experimental study on acoustic emission energy as a quantitative measure of size independent specific fracture energy of concrete beams

Notched three point bend specimens (TPB) were tested under crack mouth opening displacement (CMOD) control at a rate of 0.0004 mm/s and during the fracture process acoustic emissions (AE) were simultaneously monitored. It was observed that AE energy could be related to fracture energy. An experimental study was done to understand the behavior of AE energy with parameters of concrete like its strength and size. In this study, AE energy was used as a quantitative measure of size independent specific fracture energy of concrete beams and the concepts of boundary effect and local fracture energy were used to obtain size independent AE energy from which size independent fracture energy was obtained. (C) 2010 Elsevier Ltd. All rights reserved.

An experimental study on fracture process zone in high strength concrete beams

An attempt has been made to experimentally investigate the fracture process zone (FPZ) using Acoustic Emission (AE) method in High Strength Concrete (HSC) beams subjected to monotonically increasing load. Stress waves are released during the fracture process in materials, which cause acoustic emissions. AE energy released during the fracture of notched HSC beam specimens during Three Point Bend (TPB) tests is measured and is used to investigate the FPZ in the notched HSC beams having 28-day compressive strength of 78.0 MPa. The specimens are tested by Material Testing System (MTS) of 1200 KN capacity employing Crack Mouth Opening Displacement (CMOD) control at the rate of 0.0004 mmlsec in accordance with RILEM recommendations. A brief review on AE technique applied to concrete fracture is presented. The fracture process zone developed and the AE energy released during the fracture process in high strength concrete beam specimens are presented and discussed. It was observed that AE events containing higher energy are located around the notch tip. It may be possible to relate AE energy to fracture energy of concrete.

Tension-Softening Properties for Concrete-Concrete Interfaces

The tension-softening parameters for different concrete-concrete interfaces are determined using the bimaterial cracked hinge model. Beams of different sizes having a jointed interface between two different strengths of concrete are tested under three-point bending (TPB). The load versus crack mouth opening displacement (CMOD) results are used to obtain the stress-crack opening relation through an inverse analysis. In addition, the fracture energy, tensile strength, and modulus of elasticity are also computed from the inverse analysis. The fracture properties are used in the nonlinear fracture mechanics analysis of a concrete patch-repaired beam to determine its load-carrying capacity when repaired with concrete of different strengths.

An experimental study on cracking evolution in concrete and cement mortar by the b-value analysis of acoustic emission technique

Notched three point bend (TPB) specimens made with plain concrete and cement mortar were tested under crack mouth opening displacement (CMOD) control at a rate of 0.0004 mm/s and simultaneously acoustic emissions (AE) released were recorded during the experiments. Amplitude distribution analysis of AE released during concrete was carried out to study the development of fracture process in concrete and mortar specimens. The slope of the log-linear frequency-amplitude distribution of AE is known as the AE based b-value. The AE based b-value was computed in terms of physical process of time varying applied load using cumulative frequency distribution (Gutenberg-Richter relationship) and discrete frequency distribution (Aki's method) of AE released during concrete fracture. AE characteristics of plain concrete and cement mortar were studied and discussed and it was observed that the AE based b-value analysis serves as a tool to identify the damage in concrete structural members. (C) 2012 Elsevier Ltd. All rights reserved.

Microcracking and fracture process in cement mortar and concrete: a comparative study using acoustic emission technique

This article reports the acoustic emission (AE) study of precursory micro-cracking activity and fracture behaviour of quasi-brittle materials such as concrete and cement mortar. In the present study, notched three-point bend specimens (TPB) were tested under crack mouth opening displacement (CMOD) control at a rate of 0.0004 mm/sec and the accompanying AE were recorded using a 8 channel AE monitoring system. The various AE statistical parameters including AE event rate , AE energy release rate , amplitude distribution for computing the AE based b-value, cumulative energy (I E) pound and ring down count (RDC) were used for the analysis. The results show that the micro-cracks initiated and grew at an early stage in mortar in the pre peak regime. While in the case of concrete, the micro-crack growth occurred during the peak load regime. However, both concrete and mortar showed three distinct stages of micro-cracking activity, namely initiation, stable growth and nucleation prior to the final failure. The AE statistical behavior of each individual stage is dependent on the number and size distribution of micro-cracks. The results obtained in the laboratory are useful to understand the various stages of micro-cracking activity during the fracture process in quasi-brittle materials such as concrete & mortar and extend them for field applications.