Controle de doenças fúngicas e de danos por frio em pós-colheita de lima ácida Tahiti

The Tahiti lime appears very susceptible to attack by post-harvest diseases, primarily by the fungi Penicillium and Phomopsis, and also because of its high sensitivity to storage at low temperatures. In order to reduce such damage, the present study aimed to verify the efficiency of heat treatment and disinfection of pathogens in the prevention of post-harvest chilling injury of this cultivar and to compare this treatment with other products using the conventional fungicides. The heat treatments were studied with hot-water temperatures ranging between 48 and 56° C. Water at room temperature was used as a control treatment. After treatment, the fruits were kept under cold temperature at 10° C and RH 90% for about 45 days. For comparison, three other treatments were carried out simultaneously, one using imazalil, one with baking soda, and a third with sodium carbonate, these three products being applied by baths in cold water. Two groups of fruit were evaluated, one treated by immersion considering pathogens coming from the field and another by inoculation with spores of the previously isolated pathogens. For the evaluation of physical and chemical parameters of fruits, determinations were made of the skin color, texture, weight loss, size, juice yield, soluble solids, total acidity and vitamin C content. The determination of the sensitivity of the fruit to cold was made by their exposure at temperatures inducing cold damage. The design was a randomized block design with nine treatments, analyzed by the Statgraphics statistical package. Heat treatments, especially at 52° C, were shown to be more promising in the control of pathogenic fungi and cold damage, surpassing the conventional fungicides. No changes were found in the intrinsic and extrinsic parameters in relation to the application of the different treatments.

Avaliação físico-química e sensorial de fermentado de acerola

Fruit processing for beverage production purposes is a way of adding value to the raw material and of raising the farmer s income by increasing the demand. Thus the objective of this work was the production of fermented West Indian cherry beverages and their physicochemical and sensory evaluation. The beverages were produced based on the Brazilian legislation for fermented fruit beverages and wine. The fermented beverages were produced from West Indian cherry pulp (pulper) and juice (press) and sweetened with sugar to obtain three types of beverage: dry, semidry and sweet. The beverages were submitted to the following physicochemical analyses: pH, alcohol, reducing sugars, total reducing sugars, total acidity, volatile acidity, fixed acidity, dry extract, reduced dry extract, alcohol to reduced dry extract ratio, free sulphur dioxide, total sulphur dioxide and turbidity. In the sensory analysis, the beverages were assessed using a 9-point hedonic scale, evaluating the attributes of appearance, odour, flavour and overall assessment. The chemical and sensory results were submitted to an analysis of variance and the means compared using Tukey s test (5%). Both the raw materials (pulp and juice) and the different sugar concentrations (dry, semidry and sweet) interfered in the sensory and physicochemical parameters of the fermented West Indian cherry beverages, the tasters showing preference for the sweetened beverages.

Caracterização físico-química de cervejas elaboradas com mel

The aim of this study was to produce and physicochemically characterize beer elaborated with honey. Beer production assays were carried out with nine treatments, the combination of three concentrations of the original extract (11, 13 and 15 ºBrix) with three percentages of honey in the wort formulation (0, 20 and 40%). The experiment was completely randomized with two replicates, giving a total of eighteen trials. Mashing was carried out by infusion and the honey was added during the boiling step. After clarification, the extract content was corrected with water and the wort then inoculated with bottom-fermenting yeast. Fermentation was at 10 ºC. The beer was bottled manually and stored in a freezer at a temperature of 0 ºC for 15 days, for maturation. The beers were analyzed for their alcohol content, true extract, apparent extract, colour, bitterness, turbidity, pH, total acidity, carbon dioxide, foam density and total foam. The results of the physicochemical analysis were subjected to an analysis of variance, and the means compared by Tukey's test at 5% probability. All beers were considered to be pale. The presence of honey in the formulation enhanced carbonation, foam density and total foam, but the beers were less bitter and less acid.

Própolis na produção de cachaça orgânica de qualidade

Pós-graduação em Microbiologia Agropecuária - FCAV

Produção de etanol utilizando mix de sorgo sacarino e cana-de-açúcar em processo de maturação

Pós-graduação em Microbiologia Agropecuária - FCAV

Produção de cerveja, utilizando méis de diferentes origens botânicas como adjuntos

This study aimed to produce beer, using different botanical origins of honeys (orange, eucalyptus and wild), as malt adjuncts, and their Physical-chemical and sensorial characterizations. The production was made with malt, water, hops and honey. All musts were adjusted to 12 Brix, and the concentration of honey in the formulation was 45% (based on the extract), except for the control (0%). The physical and chemical analysis were performed on malt (extract content), honey (pH, free acidity, lactonic acidity, total acidity, color, turbidity, extract content, moisture content, reducing sugar, total reducing sugar and sucrose) in wort (content extract, pH, color, turbidity, fermentability ,bitterness and total acidity) and beer apparent extract, apparent fermentability, real extract, real fermentability, alcohol content, pH, total acidity, total foam, foam density , bitterness, carbon dioxide, color and turbidity). Sensory analysis was performed by nine-points hedonic scale testing. The attributes evaluated were appearance, aroma, flavor and overall. The results were submitted to ANOVA and means compared by Tukey testing at a 5% of probability. Beer with honey as adjuncts’ had high fermentability and low content of fat, compared to the pure malt beer. The addition of honey as an adjunct did not affect the majority of the physical-chemical parameters, except for turbidity, whereas beer with honey showed the highest value for this feature, in addition, it has also presented their biterness differences the values for beer with honey were lower. The different types of honeys did not affect the acceptability of beer, however, the beer with honey showed greater acceptance between beer with malt and honey

Produção de bioetanol a partir da fermentação de caldo de sorgo sacarino e cana-de-açúcar

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Does the gastroprotective action of a medicinal plant ensure healing effects? An integrative study of the biological effects of Serjania marginata Casar. (Sapindaceae) in rats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Yeast CA-11 fermentation in musts treated with brown and green propolis

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Chemico-technological parameters and maturation curves of sweet sorghum genotypes for bioethanol production

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Produção e qualidade de batata-doce em função das doses e parcelamento da adubação potássica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização da produção e qualidade físico-química de méis produzidos no Estado de Pernambuco

The present study had as objective contribute to the characterization of beekeeping in the Pernambuco State and evaluate the physical-chemical quality of the honeys produced in the region. For this, was applied a directed formulary to the representative organ of beekeeping class aboutthe productives and technicals aspects of beekeepers. Was obtained 14 samples of honey by Apis mellifera africanized, stored in sterile plastic vessels was sent to the Beekeeping Products Quality Control Laboratory (CEA-UNITAU). Was observed that the most of beekeepers have of 50 to 100 hives (57,14%), 28,57% of 100 to 200 hives and 14,28% more than 500 hives, being that 85,71% produce 30 to 50 kg honey/hives/flowering. All use the standard hive Langstroth and 85,71% obtain their swarm by capture. About the physical-chemical quality of the honey, was observed that moisture content varied from 18,2% to 22,0%, with mean value of 19,80±1,11; the water activity varied from 0,70 to 0,84 aw, with mean value of 0,79±0,05 aw; the total acidity was 24,91±8,99 meq/kg and the average index of hydroxymethylfurfural was 16,32±17,88 meq/kg. The results obtained are according to the quality limits established by the brazilian legislation, excepted the water activity that exceeded the maximum limit of 0,65 aw. The datasobtained in this paper shows the development of beekeeping in Pernambuco State and the honey presents nice quality.

Utilização dos parâmetros físico-químicos e redes neurais artificiais na identificação dos méis de abelhas (Apis mellifera L.) produzidos no verão e inverno na microrregião de Campos de Jordão, São Paulo

The objective of this work was to typify, through physicochemical parameters, honey from Campos do Jordão’s microrregion, and verify how samples are grouped in accordance with the climatic production seasonality (summer and winter). It were assessed 30 samples of honey from beekeepers located in the cities of Monteiro Lobato, Campos do Jordão, Santo Antonio do Pinhal e São Bento do Sapucaí-SP, regarding both periods of honey production (November to February; July to September, during 2007 and 2008; n = 30). Samples were submitted to physicochemical analysis of total acidity, pH, humidity, water activity, density, aminoacids, ashes, color and electrical conductivity, identifying physicochemical standards of honey samples from both periods of production. Next, we carried out a cluster analysis of data using k-means algorithm, which grouped the samples into two classes (summer and winter). Thus, there was a supervised training of an Artificial Neural Network (ANN) using backpropagation algorithm. According to the analysis, the knowledge gained through the ANN classified the samples with 80% accuracy. It was observed that the ANNs have proved an effective tool to group samples of honey of the region of Campos do Jordao according to their physicochemical characteristics, depending on the different production periods.

Caracterização química e legalidade em bebidas não alcoólicas de maçã

Apple is a fruit that offers promising prospect for industrialization as it has favorable characteristics for this purpose and can obtain products with good acceptance. In Brazil, approximately 15% of the production is processed into juice, and a portion is exported. Among the fresh fruit and juice, apple adds US$ 30 million annually to the Brazilian foreign exchange earnings. The aim of this study was to characterize, using chemical analysis, concentrated juices, commercial apple juice, nectar, and soft drink. In addition, to compare them with their respective Quality and Identity Standards (PIQ) published by the Ministry of Agriculture, Livestock and Food Supply (MAPA) and Codex Alimentarius. Concentrated juices and commercial beverages were analyzed in triplicate for soluble solids content (Brix), pH, total acidity (AT), and ratio. In concentrated juices, the Total Sugar Reducer (ART) was also assessed. The results obtained in the laboratory were compared with the PIQ and Codex Alimentarius to verify compliance with applicable regulations. Seven concentrate juices, five juices, six nectars, and three apple-flavoured soft drinks were analyzed. The Brix of pulpy and clarified concentrated juices were, respectively, 71.16±1.29 and 40.40±0.57°Brix. In all concentrated juices, the Brix was in accordance with Codex Alimentarius. The Brix and AT in sweetened clarified juices were 11.50±0.14°Brix and 0.18±0.04g of malic acid/100g sample. In pulpy whole juices the values ​​were 11.20±0.70°Brix and 0.30±0.06g of malic acid/100g sample. The values of Brix and AT in apple-flavoured soft drinks were 11.03±0.93°Brix and 0.18±0.04g of malic acid/100ml sample. Commercial juices and soft drinks also presented °Brix and AT in accord with the PIQ established by MAPA. The apple nectars could not be compared with the standards because they are not published by MAPA or Codex Alimentarius. The definition of the PIQ is an important tool for quality control of beverages manufacture in Brazil. Therefore, it is recommended for the control agencies to define the parameters that are not established.

Control of bacterial spot of tomato and activation of enzymes related to resistance by chemicals under field conditions

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)