891 resultados para Sweden. Riksarkivet
Resumo:
AimSustainability has become an important factor to consider while buying goods and services. People are being more conscious toward environmental impacts of products and services. This attitude has motivated many businesses to develop their production in contact with sustainability. The aim of this paper is to investigate different consumer behaviors toward sustainability in general and in relation to vehicles in Norway and Sweden.ApproachThe project has been embarked by dividing it into two tasks.1. Analyzing past, present and future development, growth and importance of sustainability concept. Describe the role of Government authorities in Norway and Sweden to promote sustainable consumption.2. Investigating important factors of consumer behaviors which influence their buying decision toward sustainable products in general and in relation to sustainable vehicles. Highlight the role of vehicle manufacturing companies to promote sustainable consumption.MethodA research has been conducted in order to explore consumer behavior toward sustainability in Norway and Sweden. Research is based on Document study and primary research which include questionnaire survey with consumers and interviews with vehicle dealers. In addition an expert inquiry is conducted to light up consumer intensions in Norway and Sweden toward sustainability.ResultsThe result of investigation has been revealed in shape of analyses and conclusion at the end. A comparison has been made between primary research and secondary research and findings are overlapping. Sustainable vehicles are being more popular among consumers in Norway and Sweden. Consumption trends are changing over time and environmental friendly attitudes are more developing among Swedish consumers as compared to Norwegian.
Resumo:
The paper analyses Gender Equality, Gender Equity and policies of combating inequality at workplace to make the society equal as a case study of Sweden. The aim of paper is see the gender equality, gender equity, discrimination against women at workplace and to describe the policies combating inequality in the welfare state of Sweden. This work highlights the gender equality in terms of institutionalizing gender equality, gender equity, gender and pay gap, parental leave, gender and the pension system and sexual behavior directed towards women and policies combating inequality to bring equality in society. For my research I used the secondary data the fact sheets, scientific literature, statistics from eurostate of Sweden and case studies about Swedish society and the theoretical explanation to explain the phenomena. To achieve my aim I used the combination of both qualitative and quantitative methods of research. I showed the empirical evidences of these phenomena from the Swedish society and theoretical analysis about equality and equity of gender in different wakes of life. I found an interesting conclusion that there are good policies and legislation to combat inequality to bring society but there are no policies to change the perception of society about male and female role.
Resumo:
In Sweden, 90% of the solar heating systems are solar domestic hot water and heating systems (SDHW&H), so called combisystems. These generally supply most of the domestic hot water needs during the summer and have enough capacity to supply some energy to the heating system during spring and autumn. This paper describes a standard Swedish combisystem and how the output from it varies with heating load, climate within Sweden, and how it can be increased with improved system design. A base case is defined using the standard combi- system, a modern Swedish single family house and the climate of Stockholm. Using the simulation program Trnsys, parametric studies have been performed on the base case and improved system designs. The solar fraction could be increased from 17.1% for the base case to 22.6% for the best system design, given the same system size, collector type and load. A short analysis of the costs of changed system design is given, showing that payback times for additional investment are from 5-8 years. Measurements on system components in the laboratory have been used to verify the simulation models used. More work is being carried out in order to find even better system designs, and further improvements in system performance are expected.
Resumo:
Climate change as a phenomenon will imply new risks for the ski industry. Intergovernmental Panal on Climate Change presents three future scenarios, during the periods between 1990-2100, in forms of increased temperatures, a rise in the sea level and seasonal variations, variables out of which two have direct impacts on the ski industry. The aim for this study was to explore and compare attitudes towards climate change between five ski resorts located in mid-south of Sweden. This was done through in depth interviews in both face to face and by telephone. The result of the study was that all the chosen ski resorts were aware of climate change as a phenomenon but have not yet recognized its consequences. All ski resorts use methods to maintain skiing i.e. artificial snow production though not because of climate change.
Resumo:
Companies are focusing on efforts increasing the overall efficiency at the same time as the ability to meet customer needs becomes even more important. There is a need to improve the organisation and the product design at the same time through the visualisation of how a product family design should be performed in order to adapt to customers, company internal issues, and long-term strategy. Therefore, there is a need for qualified personnel in today’s companies with the knowledge of product development and modularity. The graduate course Development of Modular Products at Högskolan Dalarna has the objective to provide such knowledge. As a part of the course, each student will individually perform extensive research within a chosen area with respect to Product Development and Modularity. This proceeding is the result of the students own work and was presented during a two day seminar at Dalarna University. The contents of the papers cover many areas, from the identification of customer needs to cost effective manufacturing, and benefits of modularisation. The reader of this proceeding will not only benefit from many areas within Product Development and Modularity but also from the colour of many cultures. In this proceeding, students from nine countries are represented (Bangladesh, China, Costa Rica, Germany, Holland, India, Luxembourg Nigeria, and Sweden). Enjoy the reading.
Resumo:
The aim of the study was to see if any relationship between government spending andunemployment could be empirically found. To test if government spending affectsunemployment, a statistical model was applied on data from Sweden. The data was quarterlydata from the year 1994 until 2012, unit-root test were conducted and the variables wheretransformed to its first-difference so ensure stationarity. This transformation changed thevariables to growth rates. This meant that the interpretation deviated a little from the originalgoal. Other studies reviewed indicate that when government spending increases and/or taxesdecreases output increases. Studies show that unemployment decreases when governmentspending/GDP ratio increases. Some studies also indicated that with an already largegovernment sector increasing the spending it could have negative effect on output. The modelwas a VAR-model with unemployment, output, interest rate, taxes and government spending.Also included in the model were a linear and three quarterly dummies. The model used 7lags. The result was not statistically significant for most lags but indicated that as governmentspending growth rate increases holding everything else constant unemployment growth rateincreases. The result for taxes was even less statistically significant and indicates norelationship with unemployment. Post-estimation test indicates that there were problems withnon-normality in the model. So the results should be interpreted with some scepticism.
Resumo:
This research was carried out by studying possible renovation of a two-storey detached multifamily building by using passive solar design options in a cold climate in Borlänge, Sweden where the heating Degree Days are 4451 (base 20°C). Borlänge`s housing company, Tunabyggen, plans to renovate the project house located inthe multicultural district, Jakobsgårdarna. The goal of the thesis was to suggest a redesign of the current building, decrease the heating energy use, by applying passive solar design and control strategies, in a most reasonable way. In addition ensure a better thermal comfort for the tenants in the dwellings. Literatures have been studied, from which can be inferred that passive design should be abasic design consideration for all housing constructions, because it has advantages to ensure thermal comfort, and reduce the energy use. In addition further savings can be achieved applying different types of control strategies, from which the house will be more personalized, and better adapted to the user’s needs.The proposed method is based on simulations by using TRNSYS software. First a proper building model was set up, which represents the current state of the project building. Then the thermal insulation and the windows were upgraded, based on today's building regulations. The developments of the passive solar options were accomplished in two steps. First of all the relevant basic passive design elements were considered, then those advantages were compared to the advantages of applying new conventional thermostat, and shading control strategies.The results show that there is significant potential with the different types of passive solar design; their usage depends primarily on the location of the site as well as the orientation of the project building. Applying the control strategies, such as thermostat, and shading control, along the thermal insulation upgrade, may lead to significant energy savings (around 40 %), by comparison to the reference building without any upgrade.
Resumo:
In this article, the prevailing official view of supervision as a regulatory instrument is examined as it applies to the social services sector in Sweden. The study is based on a comparison of the views expressed on the design of supervision as a regulatory instrument by two government commissions, the Supervision Commission and the Commission on Supervision within the Social Services (UTIS), and on the positions taken by the Government regarding the definitions of the concept of supervision proposed by these commissions. The view of supervision as a regulatory instrument expressed in these policy documents is analysed with the help of a theoretical framework describing the components, their functions and the governance characteristics of control systems. In the framework separate interrelated characteristics of the components are identified and summarized into two models of control systems. The analysis shows that supervision in the Swedish social services sector can be described in terms of both a disciplinary and non-disciplinary system. By its system theoretical basis and the identification of interrelated characteristics the study contributes to a broadened understanding of the construction and functions of supervision as a regulatory instrument and of how supervision within the Swedish social sector is meant to be designed.
Resumo:
Foreign graduates have been part of the success stories of many developed countries. This is as a result of their immeasurable deposit of ideas, knowledge, and innovation in the host country. Though the process of these foreign graduates penetrating and integrating into the labour market of the host country could be slow and rough as they encounter some obstacles on the way; they still strive to break through and be part of the country’s workforce because they foresee some opportunities therein. This research study is about the obstacles and opportunities foreign graduates meet in Dalarna labour market. The study investigated and identified the obstacles and opportunities foreign graduates meet in Dalarna labour market. For a thorough execution of this research, we collected primary data by handing questionnaires to 65 foreign graduates searching for jobs in Dalarna region and interviewed eight people, among which seven were foreign graduates and one of them was a staff at Arbestförmedlingen (Employment Agency) to give us a general view of the Dalarna labour market. We read previous research works and related articles to understand the topic in order to get an overview of the terminologies and concept to apply. This study concluded that language is a major obstacle foreign graduates meet in the Dalarna labour market. Other possible obstacles include culture, poor integration policies, lack of a placement bureau, lack of trust, limited opportunities, favoritism, lack of jobs, lack of references and experience. On the other hand factors like job availability, outgoing labour force and unskilled labour are possible opportunities foreign graduates meet in the Dalarna labour market. Furthermore flexible work time, good working atmosphere, experience, social security/welfare, good standard of living, family friendly region, higher wages, job security and cheap cost of living are also possible benefits that foreign graduates get in Dalarna.
Resumo:
Economic growth is the increase in the inflation-adjusted market value of the goods and services produced by an economy over time. The total output is the quantity of goods or servicesproduced in a given time period within a country. Sweden was affected by two crises during the period 2000-2010: a dot-com bubble and a financial crisis. How did these two crises affect the economic growth? The changes of domestic output can be separated into four parts: changes in intermediate demand, final domestic demand, export demand and import substitution. The main purpose of this article is to analyze the economic growth during the period 2000-2010, with focus on the dot-com bubble in the beginning of the period 2000-2005, and the financial crisis at the end of the period 2005-2010. The methodology to be used is the structural decomposition method. This investigation shows that the main contributions to the Swedish total domestic output increase in both the period 2000-2005 and the period 2005-2010 were the effect of domestic demand. In the period 2005-2010, financial crisis weakened the effect of export. The output of the primary sector went from a negative change into a positive, explained mainly by strong export expansion. In the secondary sector, export had most effect in the period 2000-2005. Nevertheless, domestic demand and import ratio had more effect during the financial crisis period. Lastly, in the tertiary sector, domestic demand can mainly explain the output growth in the whole period 2000-2010.
Resumo:
Due to health problems and the negative externalities associated with cigarette consumption, many governments try to discourage cigarette consumption by increasing its price through taxation. However, cigarette, like the other addictive goods, is viewed as that it is not sensitive to demand rules and the market forces. This study analyses the effect of price increase on cigarette consumption. We used Swedish time series data from 1970 to 2010. Our results reveal that though cigarette is addictive substance its demand is sensitive to changes in the price. Estimates from this study indicate short-run price-elasticity of -0.29 and the long run price elasticity of -0.47.
Resumo:
Internationally, research on psychiatric intensive care units (PICUs) commonly reportsresults from demographic studies such as criteria for admission, need for involuntary treatment, andthe occurrence of violent behaviour. A few international studies describe the caring aspect of thePICUs based specifically on caregivers’ experiences. The concept of PICU in Sweden is not clearlydefined. The aim of this study is to describe the core characteristics of a PICU in Sweden and todescribe the care activities provided for patients admitted to the PICUs. Critical incident techniquewas used as the research method. Eighteen caregivers at a PICU participated in the study bycompleting a semistructured questionnaire. In-depth interviews with three nurses and two assistantnurses also constitute the data. An analysis of the content identified four categories that characterizethe core of PICU: the dramatic admission, protests and refusal of treatment, escalating behaviours, andtemporarily coercive measure. Care activities for PICUs were also analysed and identified as controlling– establishing boundaries, protecting – warding off, supporting – giving intensive assistance, andstructuring the environment. Finally, the discussion put focus on determining the intensive aspect ofpsychiatric care which has not been done in a Swedish perspective before. PICUs were interpreted asa level of care as it is composed by limited structures and closeness in care.
Resumo:
Little is known about relationships between quality of care (QoC) and use of complementary and alternative medicine (CAM) among patients with lung cancer (LC). Purpose: This study examines CAM-use among patients with LC in Sweden, associations between QoC and CAM-use among these patients, and reported aspects of LC-care perceived as particularly positive and negative by patients, as well as suggestions for improving QoC. Methods: Survey data from 94 patient members of the Swedish LC patient organization about CAM-use and QoC as measured by the instrument “Quality from the patient’s perspective” were analyzed. Results: Fifty (53%) LC-patients used CAM, with 40 of the CAM-users reporting that CAM helped them. The most common CAMs used were dietary supplements and natural remedies, followed by prayer. Significantly more patients reported using prayer and meditation for cure than was the case for other types of CAM used. Less than half the CAM-users reported having spoken with staff from the biomedical health care system about their CAM-use. Patients provided numerous suggestions for improving LC-care in a variety of areas, aiming at a more effective and cohesive care trajectory. No differences in QoC were found between CAM-users and non-CAM-users, but differences in CAM-use i.e. type of CAM, reasons for using CAM, and CAM-provider consulted could be associated with different experiences of care. Conclusions: It is important to recognize that CAM-users are not a homogeneous group but might seek different types of CAMs and CAM-providers in different situations depending on experiences of care.